Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Precast PSC Girder

1 page · 4 crops · ×6 · superstructure

Matched toPrestressed Concrete Girderbridge.superstructure.main_load_system.psc_girderon “PSC Girder”

3 read off the drawings · 1 derived
The class asks forValueHowFrom
Span LengthL_spanwants m/mm40000(SQ) 46188(SK) (A1 to P1); 46000(SK) 46188(SK) (P1 to A2) mmThe elevation labels these as span dimensions for the two spans containing the precast PSC girder. The general notes state that dimensions are in millimeters unless otherwise specified. The dimensions are not explicitly labelled as girder lengths, so they are reported as the span dimensions exactly as written.readcheckp2 · p02_r01 notes
Cross-sectional AreaAwants m2/mm21110000 mm2MID SECTION area = top flange + top tapered portion + web + lower tapered portion + bottom flange = (1000 × 150) + [((1000 + 300) ÷ 2) × 100] + (300 × 1950) + [((300 + 800) ÷ 2) × 200] + (800 × 250) = 150000 + 65000 + 585000 + 110000 + 200000 = 1110000 mm2.The MID SECTION dimensions unambiguously define the full girder profile: 1000 mm top width, 300 mm web width, 800 mm bottom width, and vertical portions of 150 mm, 100 mm, 1950 mm, 200 mm, and 250 mm. These portions total the stated overall depth of 2650 mm.derivedp2 · p02_r02 mid section
Instance CountNwants count2 countThe elevation identifies two precast PSC girders and notes that one girder line is shown in each span.readp2 · p02_r01 notes
Concrete GradefckM50The concrete-grade schedule explicitly states PSC PRECAST GIRDER concrete grade as M50.readp2 · p02_r03 notes

Worked out by openai/gpt-5.6-terra-pro from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

How the sheets named it

PSC precast girderSUPPORT SECTIONMID SECTION

Every dimension read for it19

  • 150top flange thicknessp2 · p02_r02 mid section
  • 1000top widthp2 · p02_r02 mid section
  • 29top haunch depthp2 · p02_r02 mid section
  • 2650overall depthp2 · p02_r02 mid section
  • 800bottom widthp2 · p02_r02 mid section
  • 150top flange thicknessp2 · p02_r02 mid section
  • 1000top widthp2 · p02_r02 mid section
  • 2650overall depthp2 · p02_r02 mid section
  • 100top tapered portion depthp2 · p02_r02 mid section
  • 1950web vertical dimensionp2 · p02_r02 mid section
  • 200lower tapered portion depthp2 · p02_r02 mid section
  • 300web widthp2 · p02_r02 mid section
  • 250bottom flange thicknessp2 · p02_r02 mid section
  • 800bottom widthp2 · p02_r02 mid section
  • 1:50scalep2 · p02_r02 mid section
  • 1:50scalep2 · p02_r02 mid section
  • M50PSC PRECAST GIRDER concrete gradep2 · p02_r03 notes
  • 2650girder depthp2 · p02_r04 section b b
  • 2650girder depthp2 · p02_r04 section b b

Notes on the sheets that carry it

  • p21. ALL DIMENSIONS AR… OTHERWISE SPECIFIED.
  • p22. DIMENSIONS ARE IN… FOLLOWED.
  • p23. THIS DRAWING SHAL… ALIGNMENT DRAWIN…
  • p24. THE BRIDGE HAS B… CLASS 70R + TWO… 70R OR SV LOADING
  • p25. GRADE OF CONCRE… FOLLOWS:
  • p2• PSC PRECAST GIR…
  • p2• R.C.C. CAST IN S…
  • p2• R.C.C. ENDORSE…
  • p21. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN METERS UNLESS OTHERWISE SPECIFIED.
  • p22. DIMENSIONS ARE NOT TO BE SCALED. ONLY WRITTEN DIMENSIONS SHALL BE FOLLOWED.
  • p23. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RESPECTIVE HIGHWAY ALIGNMENT DRAWINGS.
  • p24. THE BRIDGE HAS BEEN DESIGNED FOR FOUR LANE OF CLASS A, ONE LANE CLASS 70R + TWO LANE OF CLASS A, ONE LANE OF 70R + ONE LANE OF 70R OR SV LOADING WHICHEVER GOVERNS, IS CONSIDERED AS LIVE LOAD.
  • p25. GRADE OF CONCRETE FOR VARIOUS STRUCTURAL COMPONENTS SHALL BE AS FOLLOWS:-
  • p26. CLEAR COVER TO ANY REINFORCEMENTS SHALL BE AS FOLLOWS:
  • p27. ALL REINFORCING STEEL SHOULD BE HIGH YIELD STRENGTH DEFORMED (TMT) BARS OF GRADE-Fe 550D, CONFORMING TO IS: 1786.
  • p28. STRIP SEAL TYE OF EXPANSION JOINT SHALL BE PROVIDED AS PER M O R T H SPECIFICATION.
  • p29. BITUMINOUS CONCRETE 50MM THICK LAID IN SINGLE LAYER.
  • p210. FRL, CAMBER / SUPER ELEVATION & LAYOUT SHALL BE FOLLOWED AS PER LATEST PLAN & PROFILE DRAWING.
  • p211. DRAINAGE SPOUT SHALL BE PROVIDED IN DECK SLAB AS PER M O R T H SPECIFICATION.
  • p212. BACK FILLING MATERIAL BEHIND ABUTMENT SHALL BE WELL COMPACTED AS PER APPENDIX 6 OF IRC 78:2014 & M O R T H SPECIFICATION BEFORE RESTING THE SUPERSTRUCTURE.
  • p213. THE STRUCTURE IS LOCATED IN SEISMIC ZONE III AND WIND ZONE IV & ’SEVERE’ EXPOSURE CONDITION.
  • p214. DIMENSION OF STRUCTURES ARE TENTATIVE AND WILL BE FINALIZED AFTER DETAIL DESIGN.
  • p215. THE SELECTED EARTH FILL USED FOR BACKFILLING BEHIND RE WALL SHALL HAVE THE FOLLOWING PROPERTIES. C=0, ø>32°,γ=2T/m³
  • p216. THE PIERCAP TOP LEVEL HAS BEEN FIXED CONSIDERING 400mm DEPTH OF BRG. & PEDESTAL. IN CASE THE BEARING HEIGHT IS LESS THAN THAT OF 200mm THEN THE HEIGHT OF THE BEARING SHALL BE ADJUSTED IN 200mm PEDESTAL.
  • p217. FOR DIMENSION & REINFORCEMENT DETAILS OF APPROACH SLAB, GAP SLAB, CRASH BARRIER & DRAINAGE SPOUTS REFER MISCELLANEOUS DRG.
  • p218. TENTATIVE WORKING PILE LOAD AND SUBJECTED TO CHANGE AS PER DETAILED DESIGN:–
  • p2RCC CRASH BARRIER
  • p2FRL
  • p2DECK CONTINUITY
  • p2PRECAST PSC GIRDER (TYP.)
  • p2RCC SEISMIC STOPPER
  • p2POT-PTFE BEARING (TYP.)
  • p2RCC COLUMN PIER
  • p2RCC PILECAP
  • p21200 DIA BORED CAST-IN-SITU PILES

Every crop it was read in — the drawing beside what the model took off it

Page 2

crop

p02_r01 notes

page 2 · structural_drawings_pkg_1_cede2c5e58c24d1b92ee5a813c5fab4c_p02_r01_notes
Original
p02_r01 notes
{
  "view": "Elevation",
  "objects": [
    {
      "name": "approach slab",
      "tag": "",
      "shape": "linear slab",
      "material": "",
      "count": 2,
      "note": "At both end abutments."
    },
    {
      "name": "PCC leveling course",
      "tag": "",
      "shape": "linear layer",
      "material": "PCC",
      "count": 2,
      "note": "Below approach slabs."
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear barrier",
      "material": "RCC",
      "count": 2,
      "note": "Shown over the approach portions."
    },
    {
      "name": "deck continuity",
      "tag": "",
      "shape": "continuous deck",
      "material": "",
      "count": 1,
      "note": "At pier P1."
    },
    {
      "name": "precast PSC girder",
      "tag": "",
      "shape": "rectangular girder elevation",
      "material": "precast PSC",
      "count": 2,
      "note": "Marked TYP.; one girder line is shown in each span."
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "",
      "shape": "rectangular bearing",
      "material": "",
      "count": null,
      "note": "Marked TYP."
    },
    {
      "name": "wall type abutment",
      "tag": "A1, A2",
      "shape": "wall abutment",
      "material": "",
      "count": 2,
      "note": "A2 is explicitly called out as WALL TYPE ABUTMENT."
    },
    {
      "name": "RCC column pier",
      "tag": "P1",
      "shape": "rectangular column",
      "material": "RCC",
      "count": 1,
      "note": "Marked TYP."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "One shown below each abutment and pier."
    },
    {
      "name": "RCC cast in situ pile",
      "tag": "",
      "shape": "circular pile",
      "material": "RCC",
      "count": null,
      "note": "Marked TYP.; pile symbols are shown beneath the caps."
    },
    {
      "name": "launching apron",
      "tag": "",
      "shape": "sloping apron",
      "material": "",
      "count": 2,
      "note": "At both abutments."
    },
    {
      "name": "independent retaining wall",
      "tag": "",
      "shape": "sloping wall",
      "material": "",
      "count": 2,
      "note": "At both approach embankments."
    },
    {
      "name": "stone pitching",
      "tag": "",
      "shape": "sloping surface protection",
      "material": "stone",
      "count": 2,
      "note": "At both retaining-wall locations."
    },
    {
      "name": "filter media",
      "tag": "",
      "shape": "layer",
      "material": "",
      "count": 2,
      "note": "Called out below stone pitching."
    }
  ],
  "measurements": [
    {
      "label": "span dimension",
      "value": "40000(SQ) 46188(SK)",
      "unit": "",
      "appliesTo": "A1 to P1"
    },
    {
      "label": "span dimension",
      "value": "46000(SK) 46188(SK)",
      "unit": "",
      "appliesTo": "P1 to A2"
    },
    {
      "label": "bridge length dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "",
      "appliesTo": "A1 to P1"
    },
    {
      "label": "bridge length dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "",
      "appliesTo": "P1 to A2"
    },
    {
      "label": "expansion gap",
      "value": "80(SQ) 92(SK)",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "expansion gap",
      "value": "80(SQ) 92(SK)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "end offset",
      "value": "1070(SQ) 1236(SK)",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pier-side offset",
      "value": "1170(SQ) 1350(SK)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pier-side offset",
      "value": "1170(SQ) 1350(SK)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "end offset",
      "value": "1070(SQ) 1236(SK)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "approach slab thickness",
      "value": "300 THK.",
      "unit": "",
      "appliesTo": "approach slab"
    },
    {
      "label": "PCC leveling course thickness",
      "value": "150 THK.",
      "unit": "",
      "appliesTo": "PCC leveling course"
    },
    {
      "label": "retaining-wall slope",
      "value": "2:1",
      "unit": "",
      "appliesTo": "independent retaining wall"
    },
    {
      "label": "minimum vertical clearance",
      "value": "1200 (min)",
      "unit": "",
      "appliesTo": "HFL"
    },
    {
      "label": "water level",
      "value": "506.000",
      "unit": "m",
      "appliesTo": "LWL"
    },
    {
      "label": "dimension at pier",
      "value": "1500 (SQ)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pile diameter",
      "value": "1200Ø",
      "unit": "",
      "appliesTo": "RCC cast in situ pile"
    },
    {
      "label": "filter media thickness",
      "value": "600 THK.",
      "unit": "",
      "appliesTo": "filter media"
    },
    {
      "label": "pile cap end projection",
      "value": "750",
      "unit": "",
      "appliesTo": "abutment pile caps"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "abutment pile caps"
    },
    {
      "label": "pile cap overall width",
      "value": "12300",
      "unit": "",
      "appliesTo": "abutment pile caps"
    },
    {
      "label": "pile cap end projection",
      "value": "750",
      "unit": "",
      "appliesTo": "pier pile cap"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "pier pile cap"
    },
    {
      "label": "pile cap overall width",
      "value": "5100",
      "unit": "",
      "appliesTo": "pier pile cap"
    },
    {
      "label": "chainage LHS",
      "value": "64+360.197",
      "unit": "km.",
      "appliesTo": "A1"
    },
    {
      "label": "chainage RHS",
      "value": "64+371.487",
      "unit": "km.",
      "appliesTo": "A1"
    },
    {
      "label": "chainage LHS",
      "value": "64+406.385",
      "unit": "km.",
      "appliesTo": "P1"
    },
    {
      "label": "chainage RHS",
      "value": "64+417.675",
      "unit": "km.",
      "appliesTo": "P1"
    },
    {
      "label": "chainage LHS",
      "value": "64+452.573",
      "unit": "km.",
      "appliesTo": "A2"
    },
    {
      "label": "chainage RHS",
      "value": "64+463.814",
      "unit": "km.",
      "appliesTo": "A2"
    },
    {
      "label": "FRL LHS",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "FRL RHS",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "FRL LHS",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "FRL RHS",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "FRL LHS",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "FRL RHS",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "sand level LHS",
      "value": "519.383",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "sand level RHS",
      "value": "509.155",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "sand level LHS",
      "value": "503.816",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "sand level RHS",
      "value": "503.883",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "sand level LHS",
      "value": "511.891",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "sand level RHS",
      "value": "512.668",
      "unit": "m",
      "appliesTo": "A2"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS AR… OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE IN… FOLLOWED.",
    "3. THIS DRAWING SHAL… ALIGNMENT DRAWIN…",
    "4. THE BRIDGE HAS B… CLASS 70R + TWO… 70R OR SV LOADING",
    "5. GRADE OF CONCRE… FOLLOWS:",
    "• PSC PRECAST GIR…",
    "• R.C.C. CAST IN S…",
    "• R.C.C. ENDORSE…"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "FR",
    "FX",
    "HFL=",
    "LWL=",
    "CHAINAGE IN (km.)",
    "LHS",
    "RHS",
    "FRL. (m)",
    "MAIN CARRIAGEWAY",
    "SAND LEVEL (m)",
    "ELEVATION",
    "(SCALE 1:300)",
    "NOTES:"
  ],
  "description": "This crop is an elevation of a bridge between abutments A1 and A2, with a central RCC column pier P1. It shows precast PSC girders, bearings, approach works, retaining walls, stone pitching, pile-supported foundations, and an elevation/chainage table. A notes block is present at the lower right but is cropped at the sheet edge and only partial text is visible."
}

p02_r01 notesElevation

  • precast PSC girder×2rectangular girder elevationprecast PSCMarked TYP.; one girder line is shown in each span.

40000(SQ) 46188(SK) span dimension46000(SK) 46188(SK) span dimension37761(SQ) 43602(SK) bridge length dimension37761(SQ) 43602(SK) bridge length dimension80(SQ) 92(SK) expansion gap80(SQ) 92(SK) expansion gap1070(SQ) 1236(SK) end offset1170(SQ) 1350(SK) pier-side offset+34 more

crop

p02_r02 mid section

page 2 · structural_drawings_pkg_1_cede2c5e58c24d1b92ee5a813c5fab4c_p02_r02_mid_section
Original
p02_r02 mid section
{
  "view": "Cross Section",
  "objects": [
    {
      "name": "precast PSC girder · rectangular stem with widened top flange · precast prestressed concrete · Support cross-section profile shown.",
      "tag": "SUPPORT SECTION",
      "shape": "rectangular stem with widened top flange",
      "material": "precast prestressed concrete",
      "count": 1,
      "note": "Support cross-section profile shown."
    },
    {
      "name": "precast PSC girder · I-girder with tapered haunches and widened top and bottom flanges · precast prestressed concrete · Mid-span cross-section profile shown.",
      "tag": "MID SECTION",
      "shape": "I-girder with tapered haunches and widened top and bottom flanges",
      "material": "precast prestressed concrete",
      "count": 1,
      "note": "Mid-span cross-section profile shown."
    }
  ],
  "measurements": [
    {
      "label": "top flange thickness",
      "value": "150",
      "unit": "",
      "appliesTo": "SUPPORT SECTION"
    },
    {
      "label": "top width",
      "value": "1000",
      "unit": "",
      "appliesTo": "SUPPORT SECTION"
    },
    {
      "label": "top haunch depth",
      "value": "29",
      "unit": "",
      "appliesTo": "SUPPORT SECTION"
    },
    {
      "label": "overall depth",
      "value": "2650",
      "unit": "",
      "appliesTo": "SUPPORT SECTION"
    },
    {
      "label": "bottom width",
      "value": "800",
      "unit": "",
      "appliesTo": "SUPPORT SECTION"
    },
    {
      "label": "top flange thickness",
      "value": "150",
      "unit": "",
      "appliesTo": "MID SECTION"
    },
    {
      "label": "top width",
      "value": "1000",
      "unit": "",
      "appliesTo": "MID SECTION"
    },
    {
      "label": "overall depth",
      "value": "2650",
      "unit": "",
      "appliesTo": "MID SECTION"
    },
    {
      "label": "top tapered portion depth",
      "value": "100",
      "unit": "",
      "appliesTo": "MID SECTION"
    },
    {
      "label": "web vertical dimension",
      "value": "1950",
      "unit": "",
      "appliesTo": "MID SECTION"
    },
    {
      "label": "lower tapered portion depth",
      "value": "200",
      "unit": "",
      "appliesTo": "MID SECTION"
    },
    {
      "label": "web width",
      "value": "300",
      "unit": "",
      "appliesTo": "MID SECTION"
    },
    {
      "label": "bottom flange thickness",
      "value": "250",
      "unit": "",
      "appliesTo": "MID SECTION"
    },
    {
      "label": "bottom width",
      "value": "800",
      "unit": "",
      "appliesTo": "MID SECTION"
    },
    {
      "label": "scale",
      "value": "1:50",
      "unit": "",
      "appliesTo": "SUPPORT SECTION"
    },
    {
      "label": "scale",
      "value": "1:50",
      "unit": "",
      "appliesTo": "MID SECTION"
    }
  ],
  "notes": [],
  "labels": [
    "C OF GIRDER",
    "C OF GIRDER",
    "SUPPORT SECTION",
    "(SCALE 1:50)",
    "MID SECTION",
    "(SCALE 1:50)",
    "CROSS SECTION OF PRECAST PSC GIRDER"
  ],
  "description": "The crop shows cross sections of a precast PSC girder at the support and at the mid section. It documents the differing girder profiles, overall dimensions, flange widths, web width, and tapered transition dimensions."
}

p02_r02 mid sectionCross Section

  • precast PSC girder · rectangular stem with widened top flange · precast prestressed concrete · Support cross-section profile shown.SUPPORT SECTION×1rectangular stem with widened top flangeprecast prestressed concreteSupport cross-section profile shown.
  • precast PSC girder · I-girder with tapered haunches and widened top and bottom flanges · precast prestressed concrete · Mid-span cross-section profile shown.MID SECTION×1I-girder with tapered haunches and widened top and bottom flangesprecast prestressed concreteMid-span cross-section profile shown.

150 top flange thickness1000 top width29 top haunch depth2650 overall depth800 bottom width150 top flange thickness1000 top width2650 overall depth+8 more

crop

p02_r03 notes

page 2 · structural_drawings_pkg_1_cede2c5e58c24d1b92ee5a813c5fab4c_p02_r03_notes
Original
p02_r03 notes
{
  "view": "Notes",
  "objects": [
    {
      "name": "PSC precast girder",
      "tag": "",
      "shape": "",
      "material": "precast concrete",
      "count": null,
      "note": "Concrete grade specified as M50."
    },
    {
      "name": "cast in situ deck slab",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "end cross girder",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "intermediate cross girder",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "bearing pedestal",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M50."
    },
    {
      "name": "crash barrier",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M40."
    },
    {
      "name": "approach slab",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M30."
    },
    {
      "name": "levelling course",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M15."
    },
    {
      "name": "dirt wall & slab",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M35."
    },
    {
      "name": "abutment",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "pier",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "pile foundation",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M35; tentative working pile loads are stated."
    },
    {
      "name": "reinforcing steel bars",
      "tag": "",
      "shape": "deformed",
      "material": "high yield strength steel",
      "count": null,
      "note": "TMT bars of grade-Fe 550D, conforming to IS: 1786."
    },
    {
      "name": "strip seal type expansion joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "To be provided as per M O R T H specification."
    },
    {
      "name": "bituminous concrete",
      "tag": "",
      "shape": "single layer",
      "material": "bituminous concrete",
      "count": null,
      "note": "Laid in single layer."
    },
    {
      "name": "drainage spout",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "To be provided in deck slab as per M O R T H specification."
    },
    {
      "name": "back filling material",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Behind abutment; to be well compacted."
    },
    {
      "name": "RE wall",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Selected earth fill behind RE wall is specified."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Bearing height is referenced in relation to a 200mm pedestal."
    },
    {
      "name": "piercap",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Top level fixed considering bearing and pedestal depth."
    },
    {
      "name": "gap slab",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Refer miscellaneous drawing for dimension and reinforcement details."
    }
  ],
  "measurements": [
    {
      "label": "PSC PRECAST GIRDER concrete grade",
      "value": "M50",
      "unit": "",
      "appliesTo": "PSC precast girder"
    },
    {
      "label": "R.C.C. CAST IN SITU DECK SLAB concrete grade",
      "value": "M45",
      "unit": "",
      "appliesTo": "cast in situ deck slab"
    },
    {
      "label": "R.C.C. END CROSS GIRDER concrete grade",
      "value": "M45",
      "unit": "",
      "appliesTo": "end cross girder"
    },
    {
      "label": "R.C.C. INTERMEDIATE CROSS GIRDER concrete grade",
      "value": "M45",
      "unit": "",
      "appliesTo": "intermediate cross girder"
    },
    {
      "label": "BEARING PEDESTAL concrete grade",
      "value": "M50",
      "unit": "",
      "appliesTo": "bearing pedestal"
    },
    {
      "label": "CRASH BARRIER concrete grade",
      "value": "M40",
      "unit": "",
      "appliesTo": "crash barrier"
    },
    {
      "label": "APPROACH SLAB concrete grade",
      "value": "M30",
      "unit": "",
      "appliesTo": "approach slab"
    },
    {
      "label": "LEVELLING COURSE concrete grade",
      "value": "M15",
      "unit": "",
      "appliesTo": "levelling course"
    },
    {
      "label": "DIRT WALL & SLAB concrete grade",
      "value": "M35",
      "unit": "",
      "appliesTo": "dirt wall & slab"
    },
    {
      "label": "ABUTMENT & PIER concrete grade",
      "value": "M45",
      "unit": "",
      "appliesTo": "abutment & pier"
    },
    {
      "label": "PILE FOUNDATION concrete grade",
      "value": "M35",
      "unit": "",
      "appliesTo": "pile foundation"
    },
    {
      "label": "Foundation clear cover to reinforcements",
      "value": "75",
      "unit": "mm",
      "appliesTo": "foundation"
    },
    {
      "label": "Substructure abutment & abutment cap clear cover to reinforcements",
      "value": "45",
      "unit": "mm",
      "appliesTo": "abutment & abutment cap"
    },
    {
      "label": "Substructure pier & pier cap clear cover to reinforcements",
      "value": "45",
      "unit": "mm",
      "appliesTo": "pier & pier cap"
    },
    {
      "label": "Superstructure clear cover to reinforcements",
      "value": "45",
      "unit": "mm",
      "appliesTo": "superstructure"
    },
    {
      "label": "Reinforcing steel grade",
      "value": "Fe 550D",
      "unit": "",
      "appliesTo": "reinforcing steel bars"
    },
    {
      "label": "Bituminous concrete thickness",
      "value": "50",
      "unit": "MM",
      "appliesTo": "bituminous concrete"
    },
    {
      "label": "Selected earth fill cohesion",
      "value": "C=0",
      "unit": "",
      "appliesTo": "selected earth fill behind RE wall"
    },
    {
      "label": "Selected earth fill friction angle",
      "value": "ø>32°",
      "unit": "",
      "appliesTo": "selected earth fill behind RE wall"
    },
    {
      "label": "Selected earth fill unit weight",
      "value": "γ=2",
      "unit": "T/m³",
      "appliesTo": "selected earth fill behind RE wall"
    },
    {
      "label": "Depth of BRG. & PEDESTAL",
      "value": "400 mm — on bearing & pedestal",
      "unit": "mm",
      "appliesTo": "piercap"
    },
    {
      "label": "Bearing height threshold",
      "value": "200",
      "unit": "mm",
      "appliesTo": "bearing"
    },
    {
      "label": "Pedestal height",
      "value": "200",
      "unit": "mm",
      "appliesTo": "pedestal"
    },
    {
      "label": "MAX. VERTICAL LOAD",
      "value": "300",
      "unit": "T",
      "appliesTo": "pile"
    },
    {
      "label": "LATERAL LOAD",
      "value": "50",
      "unit": "T",
      "appliesTo": "pile"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN METERS UNLESS OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT TO BE SCALED. ONLY WRITTEN DIMENSIONS SHALL BE FOLLOWED.",
    "3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RESPECTIVE HIGHWAY ALIGNMENT DRAWINGS.",
    "4. THE BRIDGE HAS BEEN DESIGNED FOR FOUR LANE OF CLASS A, ONE LANE CLASS 70R + TWO LANE OF CLASS A, ONE LANE OF 70R + ONE LANE OF 70R OR SV LOADING WHICHEVER GOVERNS, IS CONSIDERED AS LIVE LOAD.",
    "5. GRADE OF CONCRETE FOR VARIOUS STRUCTURAL COMPONENTS SHALL BE AS FOLLOWS:-",
    "6. CLEAR COVER TO ANY REINFORCEMENTS SHALL BE AS FOLLOWS:",
    "7. ALL REINFORCING STEEL SHOULD BE HIGH YIELD STRENGTH DEFORMED (TMT) BARS OF GRADE-Fe 550D, CONFORMING TO IS: 1786.",
    "8. STRIP SEAL TYE OF EXPANSION JOINT SHALL BE PROVIDED AS PER M O R T H SPECIFICATION.",
    "9. BITUMINOUS CONCRETE 50MM THICK LAID IN SINGLE LAYER.",
    "10. FRL, CAMBER / SUPER ELEVATION & LAYOUT SHALL BE FOLLOWED AS PER LATEST PLAN & PROFILE DRAWING.",
    "11. DRAINAGE SPOUT SHALL BE PROVIDED IN DECK SLAB AS PER M O R T H SPECIFICATION.",
    "12. BACK FILLING MATERIAL BEHIND ABUTMENT SHALL BE WELL COMPACTED AS PER APPENDIX 6 OF IRC 78:2014 & M O R T H SPECIFICATION BEFORE RESTING THE SUPERSTRUCTURE.",
    "13. THE STRUCTURE IS LOCATED IN SEISMIC ZONE III AND WIND ZONE IV & ’SEVERE’ EXPOSURE CONDITION.",
    "14. DIMENSION OF STRUCTURES ARE TENTATIVE AND WILL BE FINALIZED AFTER DETAIL DESIGN.",
    "15. THE SELECTED EARTH FILL USED FOR BACKFILLING BEHIND RE WALL SHALL HAVE THE FOLLOWING PROPERTIES. C=0, ø>32°,γ=2T/m³",
    "16. THE PIERCAP TOP LEVEL HAS BEEN FIXED CONSIDERING 400mm DEPTH OF BRG. & PEDESTAL. IN CASE THE BEARING HEIGHT IS LESS THAN THAT OF 200mm THEN THE HEIGHT OF THE BEARING SHALL BE ADJUSTED IN 200mm PEDESTAL.",
    "17. FOR DIMENSION & REINFORCEMENT DETAILS OF APPROACH SLAB, GAP SLAB, CRASH BARRIER & DRAINAGE SPOUTS REFER MISCELLANEOUS DRG.",
    "18. TENTATIVE WORKING PILE LOAD AND SUBJECTED TO CHANGE AS PER DETAILED DESIGN:–"
  ],
  "labels": [
    "NOTES:",
    "FOUNDATION",
    "SUBSTRUCTURE",
    "SUPERSTRUCTURE",
    "ABUTMENT & ABUTMENT CAP",
    "PIER & PIER CAP",
    "MAX. VERTICAL LOAD",
    "LATERAL LOAD"
  ],
  "description": "This crop is a general notes block for a bridge drawing. It states drawing conventions, design loading, material grades, reinforcement cover, construction requirements, exposure conditions, and tentative pile working loads."
}

p02_r03 notesNotes

  • PSC precast girderprecast concreteConcrete grade specified as M50.

M50 PSC PRECAST GIRDER concrete gradeM45 R.C.C. CAST IN SITU DECK SLAB concrete gradeM45 R.C.C. END CROSS GIRDER concrete gradeM45 R.C.C. INTERMEDIATE CROSS GIRDER concrete gradeM50 BEARING PEDESTAL concrete gradeM40 CRASH BARRIER concrete gradeM30 APPROACH SLAB concrete gradeM15 LEVELLING COURSE concrete grade+17 more

crop

p02_r04 section b b

page 2 · structural_drawings_pkg_1_cede2c5e58c24d1b92ee5a813c5fab4c_p02_r04_section_b_b
Original
p02_r04 section b b
{
  "view": "Section",
  "objects": [
    {
      "name": "pier",
      "tag": "P1",
      "shape": "symmetrical pier assembly",
      "material": "",
      "count": 1,
      "note": "Shown in Section B-B."
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear barrier",
      "material": "RCC",
      "count": null,
      "note": "Callout shown at deck edge."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "horizontal slab",
      "material": "",
      "count": 1,
      "note": "Deck continuity is called out at the pier centreline."
    },
    {
      "name": "deck continuity",
      "tag": "",
      "shape": "joint/continuity detail",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "precast PSC girder",
      "tag": "",
      "shape": "precast girder",
      "material": "precast PSC",
      "count": 2,
      "note": "(TYP.)"
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "",
      "shape": "rectangular bearing",
      "material": "PTFE",
      "count": 2,
      "note": "(TYP.)"
    },
    {
      "name": "RCC seismic stopper",
      "tag": "",
      "shape": "rectangular block",
      "material": "RCC",
      "count": 2,
      "note": "One stopper is called out; symmetrical stopper blocks are shown."
    },
    {
      "name": "RCC column pier",
      "tag": "",
      "shape": "rectangular",
      "material": "RCC",
      "count": 1,
      "note": ""
    },
    {
      "name": "RCC pilecap",
      "tag": "",
      "shape": "rectangular",
      "material": "RCC",
      "count": 1,
      "note": ""
    },
    {
      "name": "bored cast-in-situ pile",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "Called out as 1200 DIA bored cast-in-situ piles."
    }
  ],
  "measurements": [
    {
      "label": "bearing centreline offset, SQ",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "P1 / C OF BRG."
    },
    {
      "label": "bearing centreline offset, SK",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "P1 / C OF BRG."
    },
    {
      "label": "deck depth",
      "value": "230",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "deck depth",
      "value": "230",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "girder depth",
      "value": "2650",
      "unit": "",
      "appliesTo": "precast PSC girder"
    },
    {
      "label": "girder depth",
      "value": "2650",
      "unit": "",
      "appliesTo": "precast PSC girder"
    },
    {
      "label": "horizontal dimension",
      "value": "1500(SK)",
      "unit": "",
      "appliesTo": "bearing/seismic stopper arrangement"
    },
    {
      "label": "vertical dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "pier head/cap"
    },
    {
      "label": "partial vertical dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "pier head/cap"
    },
    {
      "label": "partial vertical dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "pier head/cap"
    },
    {
      "label": "horizontal dimension, SQ/SK",
      "value": "3640(SQ)4203(SK)",
      "unit": "",
      "appliesTo": "pier head/cap"
    },
    {
      "label": "column width",
      "value": "1500",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "pilecap depth",
      "value": "1800",
      "unit": "",
      "appliesTo": "RCC pilecap"
    },
    {
      "label": "pilecap end projection",
      "value": "750",
      "unit": "",
      "appliesTo": "RCC pilecap"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "pilecap overall width",
      "value": "5100",
      "unit": "",
      "appliesTo": "RCC pilecap"
    },
    {
      "label": "pilecap end projection",
      "value": "750",
      "unit": "",
      "appliesTo": "RCC pilecap"
    },
    {
      "label": "pile diameter",
      "value": "1200",
      "unit": "DIA",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "SECTION B-B"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "FRL",
    "DECK CONTINUITY",
    "PRECAST PSC GIRDER (TYP.)",
    "RCC SEISMIC STOPPER",
    "POT-PTFE BEARING (TYP.)",
    "RCC COLUMN PIER",
    "RCC PILECAP",
    "1200 DIA BORED CAST-IN-SITU PILES"
  ],
  "labels": [
    "℄ OF BRG.",
    "SECTION B-B",
    "(SCALE 1:150)"
  ],
  "description": "This crop shows Section B-B through pier P1, including the deck, precast PSC girders, bearings, seismic stoppers, column pier, pilecap, and bored cast-in-situ piles. The section documents the principal pier and foundation geometry, with alternate SQ and SK dimensions printed at the bearing and pier-head arrangement."
}

p02_r04 section b bSection

  • precast PSC girder×2precast girderprecast PSC(TYP.)

1170(SQ) bearing centreline offset, SQ1350(SK) bearing centreline offset, SK230 deck depth230 deck depth2650 girder depth2650 girder depth1500(SK) horizontal dimension1500 vertical dimension+11 more