Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Approach Slab

1 page · 2 crops · ×2 · deck

Matched toApproach Slabbridge.approach_earthwork_system.approach_slabon “Approach Slab”

3 read off the drawings · 2 not established
The class asks forValueHowFrom
LengthLwants m/mmnot establishedNo approach-slab length is stated in the supplied readings. The bridge/span dimensions apply to spans between abutments and pier, not to the approach slab.not found
WidthWwants m/mmnot establishedNo approach-slab width is stated in the supplied readings.not found
ThicknessTwants m/mm300 THK. mmThe elevation reading explicitly labels the dimension as "approach slab thickness" applying to the approach slab. General notes state that dimensions are in millimeters unless otherwise specified.readp2 · p02_r01 notes
Instance CountNwants count2 countThe approach slab object is listed with count 2 and noted as being at both end abutments.readp2 · p02_r01 notes
Concrete GradefckM30The concrete-grade schedule explicitly states "APPROACH SLAB concrete grade" as M30.readp2 · p02_r03 notes

Worked out by openai/gpt-5.6-terra-pro from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

Every dimension read for it2

  • 300 THK.approach slab thicknessp2 · p02_r01 notes
  • M30APPROACH SLAB concrete gradep2 · p02_r03 notes

Notes on the sheets that carry it

  • p21. ALL DIMENSIONS AR… OTHERWISE SPECIFIED.
  • p22. DIMENSIONS ARE IN… FOLLOWED.
  • p23. THIS DRAWING SHAL… ALIGNMENT DRAWIN…
  • p24. THE BRIDGE HAS B… CLASS 70R + TWO… 70R OR SV LOADING
  • p25. GRADE OF CONCRE… FOLLOWS:
  • p2• PSC PRECAST GIR…
  • p2• R.C.C. CAST IN S…
  • p2• R.C.C. ENDORSE…
  • p21. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN METERS UNLESS OTHERWISE SPECIFIED.
  • p22. DIMENSIONS ARE NOT TO BE SCALED. ONLY WRITTEN DIMENSIONS SHALL BE FOLLOWED.
  • p23. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RESPECTIVE HIGHWAY ALIGNMENT DRAWINGS.
  • p24. THE BRIDGE HAS BEEN DESIGNED FOR FOUR LANE OF CLASS A, ONE LANE CLASS 70R + TWO LANE OF CLASS A, ONE LANE OF 70R + ONE LANE OF 70R OR SV LOADING WHICHEVER GOVERNS, IS CONSIDERED AS LIVE LOAD.
  • p25. GRADE OF CONCRETE FOR VARIOUS STRUCTURAL COMPONENTS SHALL BE AS FOLLOWS:-
  • p26. CLEAR COVER TO ANY REINFORCEMENTS SHALL BE AS FOLLOWS:
  • p27. ALL REINFORCING STEEL SHOULD BE HIGH YIELD STRENGTH DEFORMED (TMT) BARS OF GRADE-Fe 550D, CONFORMING TO IS: 1786.
  • p28. STRIP SEAL TYE OF EXPANSION JOINT SHALL BE PROVIDED AS PER M O R T H SPECIFICATION.
  • p29. BITUMINOUS CONCRETE 50MM THICK LAID IN SINGLE LAYER.
  • p210. FRL, CAMBER / SUPER ELEVATION & LAYOUT SHALL BE FOLLOWED AS PER LATEST PLAN & PROFILE DRAWING.
  • p211. DRAINAGE SPOUT SHALL BE PROVIDED IN DECK SLAB AS PER M O R T H SPECIFICATION.
  • p212. BACK FILLING MATERIAL BEHIND ABUTMENT SHALL BE WELL COMPACTED AS PER APPENDIX 6 OF IRC 78:2014 & M O R T H SPECIFICATION BEFORE RESTING THE SUPERSTRUCTURE.
  • p213. THE STRUCTURE IS LOCATED IN SEISMIC ZONE III AND WIND ZONE IV & ’SEVERE’ EXPOSURE CONDITION.
  • p214. DIMENSION OF STRUCTURES ARE TENTATIVE AND WILL BE FINALIZED AFTER DETAIL DESIGN.
  • p215. THE SELECTED EARTH FILL USED FOR BACKFILLING BEHIND RE WALL SHALL HAVE THE FOLLOWING PROPERTIES. C=0, ø>32°,γ=2T/m³
  • p216. THE PIERCAP TOP LEVEL HAS BEEN FIXED CONSIDERING 400mm DEPTH OF BRG. & PEDESTAL. IN CASE THE BEARING HEIGHT IS LESS THAN THAT OF 200mm THEN THE HEIGHT OF THE BEARING SHALL BE ADJUSTED IN 200mm PEDESTAL.
  • p217. FOR DIMENSION & REINFORCEMENT DETAILS OF APPROACH SLAB, GAP SLAB, CRASH BARRIER & DRAINAGE SPOUTS REFER MISCELLANEOUS DRG.
  • p218. TENTATIVE WORKING PILE LOAD AND SUBJECTED TO CHANGE AS PER DETAILED DESIGN:–

Every crop it was read in — the drawing beside what the model took off it

Page 2

crop

p02_r01 notes

page 2 · structural_drawings_pkg_1_cede2c5e58c24d1b92ee5a813c5fab4c_p02_r01_notes
Original
p02_r01 notes
{
  "view": "Elevation",
  "objects": [
    {
      "name": "approach slab",
      "tag": "",
      "shape": "linear slab",
      "material": "",
      "count": 2,
      "note": "At both end abutments."
    },
    {
      "name": "PCC leveling course",
      "tag": "",
      "shape": "linear layer",
      "material": "PCC",
      "count": 2,
      "note": "Below approach slabs."
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear barrier",
      "material": "RCC",
      "count": 2,
      "note": "Shown over the approach portions."
    },
    {
      "name": "deck continuity",
      "tag": "",
      "shape": "continuous deck",
      "material": "",
      "count": 1,
      "note": "At pier P1."
    },
    {
      "name": "precast PSC girder",
      "tag": "",
      "shape": "rectangular girder elevation",
      "material": "precast PSC",
      "count": 2,
      "note": "Marked TYP.; one girder line is shown in each span."
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "",
      "shape": "rectangular bearing",
      "material": "",
      "count": null,
      "note": "Marked TYP."
    },
    {
      "name": "wall type abutment",
      "tag": "A1, A2",
      "shape": "wall abutment",
      "material": "",
      "count": 2,
      "note": "A2 is explicitly called out as WALL TYPE ABUTMENT."
    },
    {
      "name": "RCC column pier",
      "tag": "P1",
      "shape": "rectangular column",
      "material": "RCC",
      "count": 1,
      "note": "Marked TYP."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "One shown below each abutment and pier."
    },
    {
      "name": "RCC cast in situ pile",
      "tag": "",
      "shape": "circular pile",
      "material": "RCC",
      "count": null,
      "note": "Marked TYP.; pile symbols are shown beneath the caps."
    },
    {
      "name": "launching apron",
      "tag": "",
      "shape": "sloping apron",
      "material": "",
      "count": 2,
      "note": "At both abutments."
    },
    {
      "name": "independent retaining wall",
      "tag": "",
      "shape": "sloping wall",
      "material": "",
      "count": 2,
      "note": "At both approach embankments."
    },
    {
      "name": "stone pitching",
      "tag": "",
      "shape": "sloping surface protection",
      "material": "stone",
      "count": 2,
      "note": "At both retaining-wall locations."
    },
    {
      "name": "filter media",
      "tag": "",
      "shape": "layer",
      "material": "",
      "count": 2,
      "note": "Called out below stone pitching."
    }
  ],
  "measurements": [
    {
      "label": "span dimension",
      "value": "40000(SQ) 46188(SK)",
      "unit": "",
      "appliesTo": "A1 to P1"
    },
    {
      "label": "span dimension",
      "value": "46000(SK) 46188(SK)",
      "unit": "",
      "appliesTo": "P1 to A2"
    },
    {
      "label": "bridge length dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "",
      "appliesTo": "A1 to P1"
    },
    {
      "label": "bridge length dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "",
      "appliesTo": "P1 to A2"
    },
    {
      "label": "expansion gap",
      "value": "80(SQ) 92(SK)",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "expansion gap",
      "value": "80(SQ) 92(SK)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "end offset",
      "value": "1070(SQ) 1236(SK)",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pier-side offset",
      "value": "1170(SQ) 1350(SK)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pier-side offset",
      "value": "1170(SQ) 1350(SK)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "end offset",
      "value": "1070(SQ) 1236(SK)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "approach slab thickness",
      "value": "300 THK.",
      "unit": "",
      "appliesTo": "approach slab"
    },
    {
      "label": "PCC leveling course thickness",
      "value": "150 THK.",
      "unit": "",
      "appliesTo": "PCC leveling course"
    },
    {
      "label": "retaining-wall slope",
      "value": "2:1",
      "unit": "",
      "appliesTo": "independent retaining wall"
    },
    {
      "label": "minimum vertical clearance",
      "value": "1200 (min)",
      "unit": "",
      "appliesTo": "HFL"
    },
    {
      "label": "water level",
      "value": "506.000",
      "unit": "m",
      "appliesTo": "LWL"
    },
    {
      "label": "dimension at pier",
      "value": "1500 (SQ)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pile diameter",
      "value": "1200Ø",
      "unit": "",
      "appliesTo": "RCC cast in situ pile"
    },
    {
      "label": "filter media thickness",
      "value": "600 THK.",
      "unit": "",
      "appliesTo": "filter media"
    },
    {
      "label": "pile cap end projection",
      "value": "750",
      "unit": "",
      "appliesTo": "abutment pile caps"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "abutment pile caps"
    },
    {
      "label": "pile cap overall width",
      "value": "12300",
      "unit": "",
      "appliesTo": "abutment pile caps"
    },
    {
      "label": "pile cap end projection",
      "value": "750",
      "unit": "",
      "appliesTo": "pier pile cap"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "pier pile cap"
    },
    {
      "label": "pile cap overall width",
      "value": "5100",
      "unit": "",
      "appliesTo": "pier pile cap"
    },
    {
      "label": "chainage LHS",
      "value": "64+360.197",
      "unit": "km.",
      "appliesTo": "A1"
    },
    {
      "label": "chainage RHS",
      "value": "64+371.487",
      "unit": "km.",
      "appliesTo": "A1"
    },
    {
      "label": "chainage LHS",
      "value": "64+406.385",
      "unit": "km.",
      "appliesTo": "P1"
    },
    {
      "label": "chainage RHS",
      "value": "64+417.675",
      "unit": "km.",
      "appliesTo": "P1"
    },
    {
      "label": "chainage LHS",
      "value": "64+452.573",
      "unit": "km.",
      "appliesTo": "A2"
    },
    {
      "label": "chainage RHS",
      "value": "64+463.814",
      "unit": "km.",
      "appliesTo": "A2"
    },
    {
      "label": "FRL LHS",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "FRL RHS",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "FRL LHS",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "FRL RHS",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "FRL LHS",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "FRL RHS",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "sand level LHS",
      "value": "519.383",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "sand level RHS",
      "value": "509.155",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "sand level LHS",
      "value": "503.816",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "sand level RHS",
      "value": "503.883",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "sand level LHS",
      "value": "511.891",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "sand level RHS",
      "value": "512.668",
      "unit": "m",
      "appliesTo": "A2"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS AR… OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE IN… FOLLOWED.",
    "3. THIS DRAWING SHAL… ALIGNMENT DRAWIN…",
    "4. THE BRIDGE HAS B… CLASS 70R + TWO… 70R OR SV LOADING",
    "5. GRADE OF CONCRE… FOLLOWS:",
    "• PSC PRECAST GIR…",
    "• R.C.C. CAST IN S…",
    "• R.C.C. ENDORSE…"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "FR",
    "FX",
    "HFL=",
    "LWL=",
    "CHAINAGE IN (km.)",
    "LHS",
    "RHS",
    "FRL. (m)",
    "MAIN CARRIAGEWAY",
    "SAND LEVEL (m)",
    "ELEVATION",
    "(SCALE 1:300)",
    "NOTES:"
  ],
  "description": "This crop is an elevation of a bridge between abutments A1 and A2, with a central RCC column pier P1. It shows precast PSC girders, bearings, approach works, retaining walls, stone pitching, pile-supported foundations, and an elevation/chainage table. A notes block is present at the lower right but is cropped at the sheet edge and only partial text is visible."
}

p02_r01 notesElevation

  • approach slab×2linear slabAt both end abutments.

40000(SQ) 46188(SK) span dimension46000(SK) 46188(SK) span dimension37761(SQ) 43602(SK) bridge length dimension37761(SQ) 43602(SK) bridge length dimension80(SQ) 92(SK) expansion gap80(SQ) 92(SK) expansion gap1070(SQ) 1236(SK) end offset1170(SQ) 1350(SK) pier-side offset+34 more

crop

p02_r03 notes

page 2 · structural_drawings_pkg_1_cede2c5e58c24d1b92ee5a813c5fab4c_p02_r03_notes
Original
p02_r03 notes
{
  "view": "Notes",
  "objects": [
    {
      "name": "PSC precast girder",
      "tag": "",
      "shape": "",
      "material": "precast concrete",
      "count": null,
      "note": "Concrete grade specified as M50."
    },
    {
      "name": "cast in situ deck slab",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "end cross girder",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "intermediate cross girder",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "bearing pedestal",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M50."
    },
    {
      "name": "crash barrier",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M40."
    },
    {
      "name": "approach slab",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M30."
    },
    {
      "name": "levelling course",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M15."
    },
    {
      "name": "dirt wall & slab",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M35."
    },
    {
      "name": "abutment",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "pier",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "pile foundation",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M35; tentative working pile loads are stated."
    },
    {
      "name": "reinforcing steel bars",
      "tag": "",
      "shape": "deformed",
      "material": "high yield strength steel",
      "count": null,
      "note": "TMT bars of grade-Fe 550D, conforming to IS: 1786."
    },
    {
      "name": "strip seal type expansion joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "To be provided as per M O R T H specification."
    },
    {
      "name": "bituminous concrete",
      "tag": "",
      "shape": "single layer",
      "material": "bituminous concrete",
      "count": null,
      "note": "Laid in single layer."
    },
    {
      "name": "drainage spout",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "To be provided in deck slab as per M O R T H specification."
    },
    {
      "name": "back filling material",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Behind abutment; to be well compacted."
    },
    {
      "name": "RE wall",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Selected earth fill behind RE wall is specified."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Bearing height is referenced in relation to a 200mm pedestal."
    },
    {
      "name": "piercap",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Top level fixed considering bearing and pedestal depth."
    },
    {
      "name": "gap slab",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Refer miscellaneous drawing for dimension and reinforcement details."
    }
  ],
  "measurements": [
    {
      "label": "PSC PRECAST GIRDER concrete grade",
      "value": "M50",
      "unit": "",
      "appliesTo": "PSC precast girder"
    },
    {
      "label": "R.C.C. CAST IN SITU DECK SLAB concrete grade",
      "value": "M45",
      "unit": "",
      "appliesTo": "cast in situ deck slab"
    },
    {
      "label": "R.C.C. END CROSS GIRDER concrete grade",
      "value": "M45",
      "unit": "",
      "appliesTo": "end cross girder"
    },
    {
      "label": "R.C.C. INTERMEDIATE CROSS GIRDER concrete grade",
      "value": "M45",
      "unit": "",
      "appliesTo": "intermediate cross girder"
    },
    {
      "label": "BEARING PEDESTAL concrete grade",
      "value": "M50",
      "unit": "",
      "appliesTo": "bearing pedestal"
    },
    {
      "label": "CRASH BARRIER concrete grade",
      "value": "M40",
      "unit": "",
      "appliesTo": "crash barrier"
    },
    {
      "label": "APPROACH SLAB concrete grade",
      "value": "M30",
      "unit": "",
      "appliesTo": "approach slab"
    },
    {
      "label": "LEVELLING COURSE concrete grade",
      "value": "M15",
      "unit": "",
      "appliesTo": "levelling course"
    },
    {
      "label": "DIRT WALL & SLAB concrete grade",
      "value": "M35",
      "unit": "",
      "appliesTo": "dirt wall & slab"
    },
    {
      "label": "ABUTMENT & PIER concrete grade",
      "value": "M45",
      "unit": "",
      "appliesTo": "abutment & pier"
    },
    {
      "label": "PILE FOUNDATION concrete grade",
      "value": "M35",
      "unit": "",
      "appliesTo": "pile foundation"
    },
    {
      "label": "Foundation clear cover to reinforcements",
      "value": "75",
      "unit": "mm",
      "appliesTo": "foundation"
    },
    {
      "label": "Substructure abutment & abutment cap clear cover to reinforcements",
      "value": "45",
      "unit": "mm",
      "appliesTo": "abutment & abutment cap"
    },
    {
      "label": "Substructure pier & pier cap clear cover to reinforcements",
      "value": "45",
      "unit": "mm",
      "appliesTo": "pier & pier cap"
    },
    {
      "label": "Superstructure clear cover to reinforcements",
      "value": "45",
      "unit": "mm",
      "appliesTo": "superstructure"
    },
    {
      "label": "Reinforcing steel grade",
      "value": "Fe 550D",
      "unit": "",
      "appliesTo": "reinforcing steel bars"
    },
    {
      "label": "Bituminous concrete thickness",
      "value": "50",
      "unit": "MM",
      "appliesTo": "bituminous concrete"
    },
    {
      "label": "Selected earth fill cohesion",
      "value": "C=0",
      "unit": "",
      "appliesTo": "selected earth fill behind RE wall"
    },
    {
      "label": "Selected earth fill friction angle",
      "value": "ø>32°",
      "unit": "",
      "appliesTo": "selected earth fill behind RE wall"
    },
    {
      "label": "Selected earth fill unit weight",
      "value": "γ=2",
      "unit": "T/m³",
      "appliesTo": "selected earth fill behind RE wall"
    },
    {
      "label": "Depth of BRG. & PEDESTAL",
      "value": "400 mm — on bearing & pedestal",
      "unit": "mm",
      "appliesTo": "piercap"
    },
    {
      "label": "Bearing height threshold",
      "value": "200",
      "unit": "mm",
      "appliesTo": "bearing"
    },
    {
      "label": "Pedestal height",
      "value": "200",
      "unit": "mm",
      "appliesTo": "pedestal"
    },
    {
      "label": "MAX. VERTICAL LOAD",
      "value": "300",
      "unit": "T",
      "appliesTo": "pile"
    },
    {
      "label": "LATERAL LOAD",
      "value": "50",
      "unit": "T",
      "appliesTo": "pile"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN METERS UNLESS OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT TO BE SCALED. ONLY WRITTEN DIMENSIONS SHALL BE FOLLOWED.",
    "3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RESPECTIVE HIGHWAY ALIGNMENT DRAWINGS.",
    "4. THE BRIDGE HAS BEEN DESIGNED FOR FOUR LANE OF CLASS A, ONE LANE CLASS 70R + TWO LANE OF CLASS A, ONE LANE OF 70R + ONE LANE OF 70R OR SV LOADING WHICHEVER GOVERNS, IS CONSIDERED AS LIVE LOAD.",
    "5. GRADE OF CONCRETE FOR VARIOUS STRUCTURAL COMPONENTS SHALL BE AS FOLLOWS:-",
    "6. CLEAR COVER TO ANY REINFORCEMENTS SHALL BE AS FOLLOWS:",
    "7. ALL REINFORCING STEEL SHOULD BE HIGH YIELD STRENGTH DEFORMED (TMT) BARS OF GRADE-Fe 550D, CONFORMING TO IS: 1786.",
    "8. STRIP SEAL TYE OF EXPANSION JOINT SHALL BE PROVIDED AS PER M O R T H SPECIFICATION.",
    "9. BITUMINOUS CONCRETE 50MM THICK LAID IN SINGLE LAYER.",
    "10. FRL, CAMBER / SUPER ELEVATION & LAYOUT SHALL BE FOLLOWED AS PER LATEST PLAN & PROFILE DRAWING.",
    "11. DRAINAGE SPOUT SHALL BE PROVIDED IN DECK SLAB AS PER M O R T H SPECIFICATION.",
    "12. BACK FILLING MATERIAL BEHIND ABUTMENT SHALL BE WELL COMPACTED AS PER APPENDIX 6 OF IRC 78:2014 & M O R T H SPECIFICATION BEFORE RESTING THE SUPERSTRUCTURE.",
    "13. THE STRUCTURE IS LOCATED IN SEISMIC ZONE III AND WIND ZONE IV & ’SEVERE’ EXPOSURE CONDITION.",
    "14. DIMENSION OF STRUCTURES ARE TENTATIVE AND WILL BE FINALIZED AFTER DETAIL DESIGN.",
    "15. THE SELECTED EARTH FILL USED FOR BACKFILLING BEHIND RE WALL SHALL HAVE THE FOLLOWING PROPERTIES. C=0, ø>32°,γ=2T/m³",
    "16. THE PIERCAP TOP LEVEL HAS BEEN FIXED CONSIDERING 400mm DEPTH OF BRG. & PEDESTAL. IN CASE THE BEARING HEIGHT IS LESS THAN THAT OF 200mm THEN THE HEIGHT OF THE BEARING SHALL BE ADJUSTED IN 200mm PEDESTAL.",
    "17. FOR DIMENSION & REINFORCEMENT DETAILS OF APPROACH SLAB, GAP SLAB, CRASH BARRIER & DRAINAGE SPOUTS REFER MISCELLANEOUS DRG.",
    "18. TENTATIVE WORKING PILE LOAD AND SUBJECTED TO CHANGE AS PER DETAILED DESIGN:–"
  ],
  "labels": [
    "NOTES:",
    "FOUNDATION",
    "SUBSTRUCTURE",
    "SUPERSTRUCTURE",
    "ABUTMENT & ABUTMENT CAP",
    "PIER & PIER CAP",
    "MAX. VERTICAL LOAD",
    "LATERAL LOAD"
  ],
  "description": "This crop is a general notes block for a bridge drawing. It states drawing conventions, design loading, material grades, reinforcement cover, construction requirements, exposure conditions, and tentative pile working loads."
}

p02_r03 notesNotes

  • approach slabconcreteConcrete grade specified as M30.

M50 PSC PRECAST GIRDER concrete gradeM45 R.C.C. CAST IN SITU DECK SLAB concrete gradeM45 R.C.C. END CROSS GIRDER concrete gradeM45 R.C.C. INTERMEDIATE CROSS GIRDER concrete gradeM50 BEARING PEDESTAL concrete gradeM40 CRASH BARRIER concrete gradeM30 APPROACH SLAB concrete gradeM15 LEVELLING COURSE concrete grade+17 more