Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Wall

1 page · 5 crops · ×14 · substructure

⚠ No class in the bridge ontology fits this itemAdd a class

The drawing only says Wall and does not establish whether it is a retaining wall, pier wall, or abutment wall.

How the sheets named it

end wallfront face of wallWALL 1WALL 2WALL NO. 1; WALL NO. 2WALL NO. 1WALL NO. 2

Notes on the sheets that carry it

  • p1TEMPORARY SHORING AS NECESSARY, TYP.
  • p1TO BE REMOVED
  • p1APPROXIMATE EXISTING GROUNDLINE
  • p1NOTES:
  • p11. ALL BENTS AR… RAILWAY
  • p12. END BENT PILE…
  • p1** 3. STATIONS ARE … AND B.F.P.R. O… ELEVATIONS A… PROFILE GRADE… PROFILE GRA…
  • p1*** 4. MEASURED AL…
  • p1⑤ 5. LEFT BRIDGE: MINIMUM REQU… EXISTING TRAC… FUTURE TRAC… RIGHT BRIDGE: MINIMUM REQU… EXISTING TRAC… FUTURE TRAC…
  • p1**⑥ 6. MINIMUM REQU…
  • p1CHAIN LINK WIRE FENCE, TYP.
  • p1FRONT FACE OF WALL NO. 1
  • p1FRONT FACE OF WALL NO. 2
  • p1FUTURE GROUNDLINE
  • p1℄ FUTURE ACCESS ROAD
  • p1℄ EXISTING TRACK
  • p1℄ FUTURE TRACK
  • p1POINT OF MIN. VERT. CLEARANCE
  • p1FUTURE POINT OF MIN. VERT. CLEARANCE
  • p1MIN. HORIZ. CL. CALCULATED TO FACE OF COLUMN
  • p1EL. 151.00, TYP.

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

bridge_1_right

page 1 · bridge_1_right
Original
bridge_1_right
{
  "view": "Unclear",
  "objects": [
    {
      "name": "bridge deck / superstructure outline",
      "tag": "",
      "shape": "long rectangular, skewed in plan",
      "material": "",
      "count": 2,
      "note": "Two parallel bridge plan outlines are shown, identified by PGL WESTBOUND and PGL EASTBOUND."
    },
    {
      "name": "end wall",
      "tag": "WALL 1",
      "shape": "linear wall face",
      "material": "",
      "count": 2,
      "note": "Front face is called out in both plan views and elevation as WALL NO. 1."
    },
    {
      "name": "end wall",
      "tag": "WALL 2",
      "shape": "linear wall face",
      "material": "",
      "count": 2,
      "note": "Front face is called out in both plan views and elevation as WALL NO. 2."
    },
    {
      "name": "bent",
      "tag": "BENT 1L / BENT 1R",
      "shape": "line support in plan; end support in elevation",
      "material": "",
      "count": 2,
      "note": "Shown as B.F.P.R. BENT 1L and B.F.P.R. BENT 1R in plan; B.F.P.R. BENT 1 is shown in elevation."
    },
    {
      "name": "bent",
      "tag": "BENT 2L / BENT 2R",
      "shape": "line support in plan; column and pile cap in elevation",
      "material": "",
      "count": 2,
      "note": "Bent 2 is shown with a column, pile cap, and piles in elevation."
    },
    {
      "name": "bent",
      "tag": "BENT 3L / BENT 3R",
      "shape": "line support in plan; column and pile cap in elevation",
      "material": "",
      "count": 2,
      "note": "Bent 3 is shown with a column, pile cap, and piles in elevation."
    },
    {
      "name": "bent",
      "tag": "BENT 4L / BENT 4R",
      "shape": "line support in plan; end support in elevation",
      "material": "",
      "count": 2,
      "note": "Shown as B.F.P.R. BENT 4L and B.F.P.R. BENT 4R in plan; B.F.P.R. BENT 4 is shown in elevation."
    },
    {
      "name": "bent column",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One column is visible at each interior bent in the elevation."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Shown below the two interior bent columns in elevation."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "vertical slender rectangular",
      "material": "",
      "count": 6,
      "note": "Three piles are visible below each of the two pile caps in elevation."
    },
    {
      "name": "chain link wire fence",
      "tag": "",
      "shape": "mesh panel",
      "material": "wire",
      "count": 3,
      "note": "Called out as typical in elevation."
    },
    {
      "name": "bearing condition",
      "tag": "EXP.",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Expansion bearing labels shown in elevation."
    },
    {
      "name": "bearing condition",
      "tag": "FIX",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Fixed bearing labels shown in elevation."
    },
    {
      "name": "existing track",
      "tag": "",
      "shape": "rail alignment",
      "material": "",
      "count": 1,
      "note": "Centerline is labeled in plan and elevation."
    },
    {
      "name": "future track",
      "tag": "",
      "shape": "rail alignment",
      "material": "",
      "count": 1,
      "note": "Centerline is labeled in plan and elevation."
    },
    {
      "name": "future access road",
      "tag": "",
      "shape": "alignment",
      "material": "",
      "count": 1,
      "note": "Centerline is labeled in plan and elevation."
    },
    {
      "name": "existing groundline",
      "tag": "",
      "shape": "irregular line",
      "material": "",
      "count": 1,
      "note": "Approximate existing groundline is shown in elevation."
    },
    {
      "name": "future groundline",
      "tag": "",
      "shape": "irregular line",
      "material": "",
      "count": 1,
      "note": "Shown between the interior bents in elevation."
    }
  ],
  "measurements": [
    {
      "label": "minimum clearance",
      "value": "12'-1\"",
      "unit": "",
      "appliesTo": "Central of Georgia Railroad Company existing track"
    },
    {
      "label": "distance",
      "value": "74'-7 15/16\"",
      "unit": "",
      "appliesTo": "plan dimension"
    },
    {
      "label": "distance",
      "value": "2'-23'-16.7\"",
      "unit": "",
      "appliesTo": "dimension ahead to Perkins; text is printed as shown"
    },
    {
      "label": "distance",
      "value": "75'-10 15/16\"",
      "unit": "",
      "appliesTo": "future track plan dimension"
    },
    {
      "label": "point of minimum vertical clearance",
      "value": "1'-9 1/2\"",
      "unit": "",
      "appliesTo": "plan callout"
    },
    {
      "label": "gutter to gutter",
      "value": "40'-0\"",
      "unit": "",
      "appliesTo": "westbound bridge"
    },
    {
      "label": "out to out",
      "value": "43'-7\"",
      "unit": "",
      "appliesTo": "westbound bridge"
    },
    {
      "label": "distance",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "westbound bridge plan"
    },
    {
      "label": "distance",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "westbound bridge plan"
    },
    {
      "label": "distance",
      "value": "34'-0\"",
      "unit": "",
      "appliesTo": "westbound bridge plan"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "B.F.P.R. BENT 4L"
    },
    {
      "label": "station",
      "value": "18+16.85",
      "unit": "",
      "appliesTo": "SR 21"
    },
    {
      "label": "station",
      "value": "303+80.83",
      "unit": "",
      "appliesTo": "Central of Georgia Railroad Company"
    },
    {
      "label": "station",
      "value": "17+23.00",
      "unit": "",
      "appliesTo": "begin bridge"
    },
    {
      "label": "station",
      "value": "17+29.07",
      "unit": "",
      "appliesTo": "plan station"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "plan, typical"
    },
    {
      "label": "distance",
      "value": "1'-9 1/2\"",
      "unit": "",
      "appliesTo": "plan dimension"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "RRM P D-0080.54"
    },
    {
      "label": "bearing",
      "value": "N 83°-43'-21.7\" E",
      "unit": "",
      "appliesTo": "SR 21 alignment"
    },
    {
      "label": "distance",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "plan dimension"
    },
    {
      "label": "station",
      "value": "19+08.93",
      "unit": "",
      "appliesTo": "SR 21"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "PT#3"
    },
    {
      "label": "station",
      "value": "19+15.00",
      "unit": "",
      "appliesTo": "end bridge"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "plan, typical"
    },
    {
      "label": "gutter to gutter",
      "value": "40'-0\"",
      "unit": "",
      "appliesTo": "eastbound bridge"
    },
    {
      "label": "out to out",
      "value": "43'-7\"",
      "unit": "",
      "appliesTo": "eastbound bridge"
    },
    {
      "label": "distance",
      "value": "1'-9 1/2\"",
      "unit": "",
      "appliesTo": "plan dimension"
    },
    {
      "label": "distance",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "eastbound bridge plan"
    },
    {
      "label": "distance",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "eastbound bridge plan"
    },
    {
      "label": "distance",
      "value": "34'-0\"",
      "unit": "",
      "appliesTo": "eastbound bridge plan"
    },
    {
      "label": "distance",
      "value": "14'-1\"",
      "unit": "",
      "appliesTo": "minimum clearance callout"
    },
    {
      "label": "distance",
      "value": "5'-0\"",
      "unit": "",
      "appliesTo": "minimum horizontal clearance callout"
    },
    {
      "label": "distance",
      "value": "15'-0\"",
      "unit": "",
      "appliesTo": "minimum horizontal clearance callout"
    },
    {
      "label": "distance",
      "value": "25'-8\"",
      "unit": "",
      "appliesTo": "minimum horizontal clearance to calculated face of column"
    },
    {
      "label": "distance",
      "value": "36'-4\"",
      "unit": "",
      "appliesTo": "minimum horizontal clearance to calculated face of column"
    },
    {
      "label": "total length of bridge",
      "value": "192'-0\"",
      "unit": "",
      "appliesTo": "bridge"
    },
    {
      "label": "span length",
      "value": "55'-0\"",
      "unit": "",
      "appliesTo": "bridge span"
    },
    {
      "label": "span length",
      "value": "82'-0\"",
      "unit": "",
      "appliesTo": "bridge span"
    },
    {
      "label": "span length",
      "value": "55'-0\"",
      "unit": "",
      "appliesTo": "bridge span"
    },
    {
      "label": "elevation",
      "value": "151.00",
      "unit": "",
      "appliesTo": "future groundline, typical"
    }
  ],
  "notes": [
    "TEMPORARY SHORING AS NECESSARY, TYP.",
    "TO BE REMOVED",
    "APPROXIMATE EXISTING GROUNDLINE",
    "NOTES:",
    "1. ALL BENTS AR… RAILWAY",
    "2. END BENT PILE…",
    "** 3. STATIONS ARE … AND B.F.P.R. O… ELEVATIONS A… PROFILE GRADE… PROFILE GRA…",
    "*** 4. MEASURED AL…",
    "⑤ 5. LEFT BRIDGE: MINIMUM REQU… EXISTING TRAC… FUTURE TRAC… RIGHT BRIDGE: MINIMUM REQU… EXISTING TRAC… FUTURE TRAC…",
    "**⑥ 6. MINIMUM REQU…"
  ],
  "labels": [
    "℄ FUTURE ACCESS ROAD",
    "℄ CENTRAL OF GEORGIA RAILROAD COMPANY EXISTING TRACK",
    "℄ FUTURE TRACK",
    "TO PERKINS",
    "TO US 25/SR 121",
    "PGL WESTBOUND",
    "PGL EASTBOUND",
    "℄ SR 21",
    "RRM P D-0080.54",
    "PT#3",
    "TO GA HIGHWAY 23",
    "BEGIN BRIDGE",
    "END BRIDGE",
    "POINT OF MIN. VERT. CLEARANCE",
    "FUTURE POINT OF MIN. VERT. CLEARANCE",
    "MIN. HORIZ. CL. TO CALCULATED FACE OF COLUMN",
    "PLAN",
    "ELEVATION",
    "CHAIN LINK WIRE FENCE, TYP.",
    "PGL",
    "℄ EXISTING TRACK",
    "FUTURE GROUNDLINE",
    "N."
  ],
  "description": "The crop contains a plan at the top and an elevation at the bottom, rather than a single elevation view. The plan documents two parallel skewed bridge layouts over the Central of Georgia Railroad Company existing track and a future track, with bents identified for left and right bridge alignments. The elevation shows the bridge span arrangement, end walls, interior bent columns on pile caps and piles, bearing conditions, fencing, and groundlines."
}

bridge_1_rightUnclear

  • end wallWALL 1×2linear wall faceFront face is called out in both plan views and elevation as WALL NO. 1.
  • end wallWALL 2×2linear wall faceFront face is called out in both plan views and elevation as WALL NO. 2.

12'-1" minimum clearance74'-7 15/16" distance2'-23'-16.7" distance75'-10 15/16" distance1'-9 1/2" point of minimum vertical clearance40'-0" gutter to gutter43'-7" out to out6'-0" distance+32 more

crop

p01_r08

page 1 · bridge_bents_and_girders_p01_r08
Original
p01_r08
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bridge deck slab",
      "tag": "",
      "shape": "longitudinal rectangular slab",
      "material": "",
      "count": 1,
      "note": "Continuous across the bridge elevation."
    },
    {
      "name": "longitudinal girder",
      "tag": "",
      "shape": "longitudinal rectangular member",
      "material": "",
      "count": null,
      "note": "Individual girder quantity is not shown in this elevation."
    },
    {
      "name": "interior pier bent",
      "tag": "BENT 2 **; BENT 3 **",
      "shape": "single rectangular column with cap",
      "material": "",
      "count": 2,
      "note": "Each visible bent is supported on a pile cap."
    },
    {
      "name": "end bent",
      "tag": "B.F.P.R. BENT 1 **; B.F.P.R. BENT 4 **",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Shown at the respective bridge ends."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One shown below each interior pier bent."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "vertical slender member",
      "material": "",
      "count": 6,
      "note": "Three piles are visibly drawn below each interior pile cap."
    },
    {
      "name": "wall",
      "tag": "WALL NO. 1; WALL NO. 2",
      "shape": "vertical",
      "material": "",
      "count": 2,
      "note": "Only the front faces are called out."
    },
    {
      "name": "bearing",
      "tag": "FIX",
      "shape": "rectangular support block",
      "material": "",
      "count": 2,
      "note": "Shown at Bent 2."
    },
    {
      "name": "bearing",
      "tag": "EXP.",
      "shape": "rectangular support block",
      "material": "",
      "count": 4,
      "note": "Shown at the end supports and at Bent 3."
    },
    {
      "name": "chain link wire fence",
      "tag": "",
      "shape": "rectangular mesh panel",
      "material": "chain link wire",
      "count": 3,
      "note": "Typical."
    }
  ],
  "measurements": [
    {
      "label": "TOTAL LENGTH OF BRIDGE",
      "value": "192'-0\" ***",
      "unit": "",
      "appliesTo": "bridge"
    },
    {
      "label": "",
      "value": "55'-0\" ***",
      "unit": "",
      "appliesTo": "left bridge span"
    },
    {
      "label": "",
      "value": "82'-0\" ***",
      "unit": "",
      "appliesTo": "middle bridge span"
    },
    {
      "label": "",
      "value": "55'-0\" ***",
      "unit": "",
      "appliesTo": "right bridge span"
    },
    {
      "label": "EL.",
      "value": "151.00",
      "unit": "",
      "appliesTo": "typical elevation"
    }
  ],
  "notes": [
    "CHAIN LINK WIRE FENCE, TYP.",
    "FRONT FACE OF WALL NO. 1",
    "FRONT FACE OF WALL NO. 2",
    "FUTURE GROUNDLINE",
    "APPROXIMATE EXISTING GROUNDLINE",
    "℄ FUTURE ACCESS ROAD",
    "℄ EXISTING TRACK",
    "℄ FUTURE TRACK"
  ],
  "labels": [
    "PGL",
    "ELEVATION"
  ],
  "description": "This crop is a longitudinal elevation of a three-span bridge, showing the deck and longitudinal girder profile over two interior pier bents and end bents. It documents span lengths, bearing designations, pile-supported interior foundations, wall-face callouts, fencing, and the indicated existing and future ground and track/access-road centerlines."
}

p01_r08Elevation

  • wallWALL NO. 1; WALL NO. 2×2verticalOnly the front faces are called out.

192'-0" *** TOTAL LENGTH OF BRIDGE55'-0" ***82'-0" ***55'-0" ***151.00 EL.

crop

p01_r01 plan of bridge bents walls and rail crossing

page 1 · gdot_plan_1_050106c481ea4f86900e478c2e4a98a6_p01_r01_plan_of_bridge_bents_walls_and_rail_crossing
Original
p01_r01 plan of bridge bents walls and rail crossing
{
  "view": "Plan",
  "objects": [
    {
      "name": "bridge deck/superstructure outline",
      "tag": "",
      "shape": "long rectangular plan outline with skewed end lines",
      "material": "",
      "count": 2,
      "note": "Two parallel bridge roadway outlines are visible; no deck material is stated."
    },
    {
      "name": "wall",
      "tag": "WALL 1",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Shown by callouts to FRONT FACE OF WALL 1 at the left ends of the two bridge outlines."
    },
    {
      "name": "wall",
      "tag": "WALL 2",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Shown by callouts to FRONT FACE OF WALL 2 at the right ends of the two bridge outlines."
    },
    {
      "name": "bridge bent",
      "tag": "BENT 1L, BENT 2L, BENT 3L, BENT 4L, BENT 1R, BENT 2R, BENT 3R, BENT 4R",
      "shape": "linear bent lines, skewed in plan",
      "material": "",
      "count": 8,
      "note": "BENT 2L, 3L, 2R, and 3R are identified by centerline callouts; the remaining bent locations are identified as B.F.P.R. bent locations."
    },
    {
      "name": "existing railroad track",
      "tag": "CENTRAL OF GEORGIA RAILROAD COMPANY EXISTING TRACK",
      "shape": "linear track alignment",
      "material": "",
      "count": 1,
      "note": "Existing track shown crossing diagonally through the bridge area."
    },
    {
      "name": "future track",
      "tag": "FUTURE TRACK",
      "shape": "linear track alignment",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "future access road",
      "tag": "FUTURE ACCESS ROAD",
      "shape": "linear alignment",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "temporary shoring",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Called out at the end-bridge area; extent and type are not shown in this crop."
    }
  ],
  "measurements": [
    {
      "label": "minimum dimension",
      "value": "12'-1\" MIN.",
      "unit": "",
      "appliesTo": "Dimension near CENTRAL OF GEORGIA RAILROAD COMPANY EXISTING TRACK"
    },
    {
      "label": "dimension",
      "value": "74'-7 5/16\"",
      "unit": "",
      "appliesTo": "Between the indicated existing-track/future-access-road alignment and the future-track alignment"
    },
    {
      "label": "bearing",
      "value": "N 2°-23'-16.7\" E",
      "unit": "",
      "appliesTo": "Alignment labeled TO PERKINS"
    },
    {
      "label": "dimension",
      "value": "75'-10 15/16\"",
      "unit": "",
      "appliesTo": "Between indicated future-track alignment limits"
    },
    {
      "label": "dimension",
      "value": "1'-9 1/2\"",
      "unit": "",
      "appliesTo": "Upper bridge roadway/gutter area"
    },
    {
      "label": "spacing",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "Upper bridge point-of-minimum-vertical-clearance locations"
    },
    {
      "label": "spacing",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "Upper bridge point-of-minimum-vertical-clearance locations"
    },
    {
      "label": "width",
      "value": "40'-0\"",
      "unit": "",
      "appliesTo": "Upper bridge; GUTTER TO GUTTER"
    },
    {
      "label": "width",
      "value": "43'-7\"",
      "unit": "",
      "appliesTo": "Upper bridge; GUTTER TO OUT"
    },
    {
      "label": "dimension",
      "value": "34'-0\"",
      "unit": "",
      "appliesTo": "Upper bridge"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "Bridge end/bent geometry, TYP."
    },
    {
      "label": "station",
      "value": "STA. 18+16.85",
      "unit": "",
      "appliesTo": "℄ SR 21"
    },
    {
      "label": "station",
      "value": "STA. 303+80.83",
      "unit": "",
      "appliesTo": "℄ CENTRAL OF GEORGIA RAILROAD COMPANY"
    },
    {
      "label": "station",
      "value": "STA. 17+23.00",
      "unit": "",
      "appliesTo": "BEGIN BRIDGE"
    },
    {
      "label": "station",
      "value": "STA. 17+29.07",
      "unit": "",
      "appliesTo": "Indicated point near left bridge end"
    },
    {
      "label": "dimension",
      "value": "1'-9 1/2\"",
      "unit": "",
      "appliesTo": "Upper bridge roadway/gutter area"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "Bridge geometry near RRMP D-0080.54"
    },
    {
      "label": "bearing",
      "value": "N 83°-43'-21.7\" E",
      "unit": "",
      "appliesTo": "℄ SR 21"
    },
    {
      "label": "dimension",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "Vertical plan dimension between indicated alignments"
    },
    {
      "label": "station",
      "value": "STA. 19+08.93",
      "unit": "",
      "appliesTo": "℄ SR 21"
    },
    {
      "label": "station",
      "value": "STA. 19+15.00",
      "unit": "",
      "appliesTo": "END BRIDGE"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "Bridge end/bent geometry, TYP."
    },
    {
      "label": "width",
      "value": "40'-0\"",
      "unit": "",
      "appliesTo": "Lower bridge; GUTTER TO GUTTER"
    },
    {
      "label": "width",
      "value": "43'-7\"",
      "unit": "",
      "appliesTo": "Lower bridge; GUTTER TO OUT"
    },
    {
      "label": "dimension",
      "value": "34'-0\"",
      "unit": "",
      "appliesTo": "Lower bridge"
    },
    {
      "label": "spacing",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "Lower bridge point-of-minimum-vertical-clearance locations"
    },
    {
      "label": "spacing",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "Lower bridge point-of-minimum-vertical-clearance locations"
    },
    {
      "label": "dimension",
      "value": "1'-9 1/2\"",
      "unit": "",
      "appliesTo": "Lower bridge roadway/gutter area"
    },
    {
      "label": "dimension",
      "value": "15'-0\"",
      "unit": "",
      "appliesTo": "Lower track/clearance dimension"
    },
    {
      "label": "dimension",
      "value": "15'-0\"",
      "unit": "",
      "appliesTo": "Lower track/clearance dimension"
    },
    {
      "label": "minimum horizontal clearance",
      "value": "25'-8\"",
      "unit": "",
      "appliesTo": "CALCULATED TO FACE OF COLUMN"
    },
    {
      "label": "minimum horizontal clearance",
      "value": "36'-4\"",
      "unit": "",
      "appliesTo": "CALCULATED TO FACE OF COLUMN"
    },
    {
      "label": "minimum dimension",
      "value": "14'-1\" MIN.",
      "unit": "",
      "appliesTo": "Lower-right indicated clearance"
    }
  ],
  "notes": [
    "POINT OF MIN. VERT. CLEARANCE",
    "FUTURE POINT OF MIN. VERT. CLEARANCE",
    "TO BE REMOVED",
    "TEMPORARY SHORING AS NECESSARY, TYP.",
    "MIN. HORIZ. CL. CALCULATED TO FACE OF COLUMN"
  ],
  "labels": [
    "℄ FUTURE ACCESS ROAD",
    "℄ CENTRAL OF GEORGIA RAILROAD COMPANY EXISTING TRACK",
    "℄ FUTURE TRACK",
    "TO PERKINS",
    "TO US 25/SR 121",
    "PGL WESTBOUND",
    "PGL EASTBOUND",
    "℄ SR 21",
    "RRMP D-0080.54",
    "PT #3",
    "BEGIN BRIDGE",
    "END BRIDGE",
    "TO GA HIGHWAY 23",
    "RR R/W",
    "PLAN"
  ],
  "description": "This crop is a plan view of two parallel bridge roadway outlines crossing the Central of Georgia Railroad Company existing track and a future track. It documents bridge bent locations, front faces of Walls 1 and 2, roadway centerlines, stationing, skew geometry, and railroad clearance dimensions."
}

p01_r01 plan of bridge bents walls and rail crossingPlan

  • wallWALL 1×2linearShown by callouts to FRONT FACE OF WALL 1 at the left ends of the two bridge outlines.
  • wallWALL 2×2linearShown by callouts to FRONT FACE OF WALL 2 at the right ends of the two bridge outlines.

12'-1" MIN. minimum dimension74'-7 5/16" dimensionN 2°-23'-16.7" E bearing75'-10 15/16" dimension1'-9 1/2" dimension6'-0" spacing6'-0" spacing40'-0" width+25 more

crop

p01_r07 elevation of bridge spans and bent piers

page 1 · gdot_plan_1_050106c481ea4f86900e478c2e4a98a6_p01_r07_elevation_of_bridge_spans_and_bent_piers
Original
p01_r07 elevation of bridge spans and bent piers
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bridge deck / superstructure",
      "tag": "",
      "shape": "long rectangular continuous profile",
      "material": "",
      "count": 1,
      "note": "Shown spanning between end walls and Bents 2 and 3."
    },
    {
      "name": "wall",
      "tag": "WALL NO. 1",
      "shape": "vertical rectangular wall",
      "material": "",
      "count": 1,
      "note": "Callout identifies the front face of Wall No. 1 at the left end."
    },
    {
      "name": "wall",
      "tag": "WALL NO. 2",
      "shape": "vertical rectangular wall",
      "material": "",
      "count": 1,
      "note": "Callout identifies the front face of Wall No. 2 at the right end."
    },
    {
      "name": "bent",
      "tag": "BENT 2",
      "shape": "vertical rectangular column",
      "material": "",
      "count": 1,
      "note": "Supported on a rectangular pile cap."
    },
    {
      "name": "bent",
      "tag": "BENT 3",
      "shape": "vertical rectangular column",
      "material": "",
      "count": 1,
      "note": "Supported on a rectangular pile cap."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One pile cap is shown below each visible interior bent."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "vertical straight",
      "material": "",
      "count": 8,
      "note": "Four piles are visibly shown below each pile cap."
    },
    {
      "name": "bearing / support condition",
      "tag": "",
      "shape": "rectangular support locations",
      "material": "",
      "count": 6,
      "note": "Locations are marked EXP. or FIX."
    },
    {
      "name": "chain link wire fence",
      "tag": "",
      "shape": "mesh fence panels",
      "material": "wire",
      "count": 3,
      "note": "Marked typical."
    }
  ],
  "measurements": [
    {
      "label": "TOTAL LENGTH OF BRIDGE",
      "value": "192’-0” ***",
      "unit": "",
      "appliesTo": "bridge"
    },
    {
      "label": "span length",
      "value": "55’-0” ***",
      "unit": "",
      "appliesTo": "B.F.P.R. BENT 1 to BENT 2"
    },
    {
      "label": "span length",
      "value": "82’-0” ***",
      "unit": "",
      "appliesTo": "BENT 2 to BENT 3"
    },
    {
      "label": "span length",
      "value": "55’-0” ***",
      "unit": "",
      "appliesTo": "BENT 3 to B.F.P.R. BENT 4"
    },
    {
      "label": "elevation",
      "value": "151.00",
      "unit": "",
      "appliesTo": "TYP."
    }
  ],
  "notes": [
    "CHAIN LINK WIRE FENCE, TYP.",
    "FRONT FACE OF WALL NO. 1",
    "FRONT FACE OF WALL NO. 2",
    "FUTURE GROUNDLINE",
    "APPROXIMATE EXISTING GROUNDLINE"
  ],
  "labels": [
    "PGL",
    "EXP.",
    "FIX",
    "℄ FUTURE ACCESS ROAD",
    "℄ EXISTING TRACK",
    "℄ FUTURE TRACK",
    "ELEVATION"
  ],
  "description": "This crop shows an elevation of a three-span bridge with end walls and two interior bents, BENT 2 and BENT 3. The elevation documents the overall bridge length and span lengths, pile-supported interior bents, typical chain link wire fence, bearing support conditions, and existing/future groundline and track references."
}

p01_r07 elevation of bridge spans and bent piersElevation

  • wallWALL NO. 1×1vertical rectangular wallCallout identifies the front face of Wall No. 1 at the left end.
  • wallWALL NO. 2×1vertical rectangular wallCallout identifies the front face of Wall No. 2 at the right end.

192’-0” *** TOTAL LENGTH OF BRIDGE55’-0” *** span length82’-0” *** span length55’-0” *** span length151.00 elevation

crop

p01_r08 elevation of bridge spans bents and fencing

page 1 · gdot_plan_1_050106c481ea4f86900e478c2e4a98a6_p01_r08_elevation_of_bridge_spans_bents_and_fencing
Original
p01_r08 elevation of bridge spans bents and fencing
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bridge deck/superstructure",
      "tag": "",
      "shape": "continuous horizontal multi-span deck",
      "material": "",
      "count": 1,
      "note": "Shown spanning between two end walls and Bents 2 and 3."
    },
    {
      "name": "chain link wire fence",
      "tag": "",
      "shape": "rectangular mesh panels",
      "material": "chain link wire",
      "count": 3,
      "note": "Shown along the bridge deck; called typical."
    },
    {
      "name": "front face of wall",
      "tag": "WALL NO. 1",
      "shape": "vertical wall",
      "material": "",
      "count": 1,
      "note": "At the left end of the bridge."
    },
    {
      "name": "front face of wall",
      "tag": "WALL NO. 2",
      "shape": "vertical wall",
      "material": "",
      "count": 1,
      "note": "At the right end of the bridge."
    },
    {
      "name": "bent",
      "tag": "B.F.P.R. BENT 1",
      "shape": "end support line",
      "material": "",
      "count": 1,
      "note": "Left bridge end support."
    },
    {
      "name": "bent",
      "tag": "BENT 2",
      "shape": "single-column pier with rectangular pile cap",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "bent",
      "tag": "BENT 3",
      "shape": "single-column pier with rectangular pile cap",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "bent",
      "tag": "B.F.P.R. BENT 4",
      "shape": "end support line",
      "material": "",
      "count": 1,
      "note": "Right bridge end support."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One shown below each of Bents 2 and 3."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "vertical",
      "material": "",
      "count": 8,
      "note": "Four piles are shown below each visible pile cap."
    },
    {
      "name": "fixed bearing",
      "tag": "FIX",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Two FIX labels are shown at Bent 2."
    },
    {
      "name": "expansion bearing",
      "tag": "EXP.",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "EXP. labels are shown at the end supports and at Bent 3."
    },
    {
      "name": "future groundline",
      "tag": "",
      "shape": "irregular sloping line",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "approximate existing groundline",
      "tag": "",
      "shape": "horizontal line",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "TOTAL LENGTH OF BRIDGE",
      "value": "192'-0\"",
      "unit": "",
      "appliesTo": "bridge"
    },
    {
      "label": "span length",
      "value": "55'-0\"",
      "unit": "",
      "appliesTo": "B.F.P.R. BENT 1 to BENT 2"
    },
    {
      "label": "span length",
      "value": "82'-0\"",
      "unit": "",
      "appliesTo": "BENT 2 to BENT 3"
    },
    {
      "label": "span length",
      "value": "55'-0\"",
      "unit": "",
      "appliesTo": "BENT 3 to B.F.P.R. BENT 4"
    },
    {
      "label": "elevation",
      "value": "151.00",
      "unit": "",
      "appliesTo": "approximate existing groundline"
    }
  ],
  "notes": [
    "CHAIN LINK WIRE FENCE, TYP.",
    "FRONT FACE OF WALL NO. 1",
    "FRONT FACE OF WALL NO. 2",
    "EL. 151.00, TYP.",
    "APPROXIMATE EXISTING GROUNDLINE"
  ],
  "labels": [
    "PGL",
    "FUTURE ACCESS ROAD",
    "EXISTING TRACK",
    "FUTURE TRACK",
    "FUTURE GROUNDLINE",
    "ELEVATION"
  ],
  "description": "This crop is an elevation of a three-span bridge with 55'-0\", 82'-0\", and 55'-0\" spans, for a total bridge length of 192'-0\". It shows end walls at B.F.P.R. Bents 1 and 4, intermediate pile-supported Bents 2 and 3, deck fencing, bearing designations, and existing/future groundline and track/access-road references."
}

p01_r08 elevation of bridge spans bents and fencingElevation

  • front face of wallWALL NO. 1×1vertical wallAt the left end of the bridge.
  • front face of wallWALL NO. 2×1vertical wallAt the right end of the bridge.

192'-0" TOTAL LENGTH OF BRIDGE55'-0" span length82'-0" span length55'-0" span length151.00 elevation