Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Wingwall

1 page · 1 crop · ×1 · substructure

Matched toWing Wallbridge.substructure.abutment_system.wing_wallon “Wingwall”

1 read off the drawings · 4 not established
The class asks forValueHowFrom
LengthLwants m/mmnot establishedThe section identifies a wingwall but gives no dimension explicitly applying to its length.not found
Wall ThicknessT_wallwants m/mmnot establishedNo thickness dimension is stated for the wingwall. The 600 THK. dimension applies to filter media, not the wingwall.not found
HeightHwants m/mmnot establishedNo vertical dimension is explicitly assigned to the wingwall. The listed vertical dimensions apply to the deck end.not found
Instance CountNwants count1 countThe object list states wingwall, count: 1.The section object list explicitly identifies one wingwall.readp2 · p02_r05 section a a
Concrete Gradefcknot establishedNo concrete grade is stated for the wingwall in the provided reading.not found

Worked out by openai/gpt-5.6-terra-pro from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

Notes on the sheets that carry it

  • p2POT-PTFE BEARING (TYP.)
  • p2RCC SEISMIC STOPPER
  • p2STONE PITCHING
  • p2INDEPENDENT RETAINING WALL
  • p2600 THK. FILTER MEDIA
  • p21200 DIA BORED CAST-IN-SITU PILES

Every crop it was read in — the drawing beside what the model took off it

Page 2

crop

p02_r05 section a a

page 2 · structural_drawings_pkg_1_7a22288d85c64bc6bd8c641faee2f453_p02_r05_section_a_a
Original
p02_r05 section a a
{
  "view": "Section",
  "objects": [
    {
      "name": "bridge deck slab",
      "tag": "",
      "shape": "rectangular horizontal slab",
      "material": "",
      "count": 1,
      "note": "Partial deck section is shown."
    },
    {
      "name": "expansion joint",
      "tag": "",
      "shape": "narrow vertical joint",
      "material": "",
      "count": 1,
      "note": "Located at C OF EXP. JOINT."
    },
    {
      "name": "abutment",
      "tag": "",
      "shape": "reinforced concrete wall with seat",
      "material": "",
      "count": 1,
      "note": "Supported on a pile cap."
    },
    {
      "name": "wingwall",
      "tag": "",
      "shape": "sloping retaining wall",
      "material": "",
      "count": 1,
      "note": "Extends from the abutment toward the left."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown below the abutment."
    },
    {
      "name": "bored cast-in-situ piles",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": "Pile locations are shown beneath the pile cap."
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Marked TYP."
    },
    {
      "name": "RCC seismic stopper",
      "tag": "",
      "shape": "rectangular block",
      "material": "RCC",
      "count": 1,
      "note": ""
    },
    {
      "name": "independent retaining wall",
      "tag": "",
      "shape": "vertical wall",
      "material": "",
      "count": 1,
      "note": "Partially shown at the right side of the section."
    },
    {
      "name": "stone pitching",
      "tag": "",
      "shape": "sloping layer",
      "material": "stone",
      "count": 1,
      "note": ""
    },
    {
      "name": "filter media",
      "tag": "",
      "shape": "tapered layer",
      "material": "",
      "count": 1,
      "note": "Shown adjacent to the independent retaining wall."
    },
    {
      "name": "reinforcement bar",
      "tag": "1",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": "Bar mark is shown within the sloping wall."
    },
    {
      "name": "reinforcement bar",
      "tag": "2",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": "Bar mark is shown within the sloping wall."
    }
  ],
  "measurements": [
    {
      "label": "dimension (SQ.)",
      "value": "1070",
      "unit": "",
      "appliesTo": "C OF BRG."
    },
    {
      "label": "dimension (SK.)",
      "value": "1236",
      "unit": "",
      "appliesTo": "C OF BRG."
    },
    {
      "label": "EXP.GAP (SQ.)",
      "value": "80",
      "unit": "",
      "appliesTo": "expansion joint"
    },
    {
      "label": "EXP.GAP (SK)",
      "value": "92",
      "unit": "",
      "appliesTo": "expansion joint"
    },
    {
      "label": "dimension (SQ)",
      "value": "3500",
      "unit": "",
      "appliesTo": "deck/abutment section"
    },
    {
      "label": "vertical dimension",
      "value": "230",
      "unit": "",
      "appliesTo": "deck end"
    },
    {
      "label": "vertical dimension",
      "value": "2650",
      "unit": "",
      "appliesTo": "deck end"
    },
    {
      "label": "horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "left deck underside"
    },
    {
      "label": "horizontal dimension",
      "value": "2850",
      "unit": "",
      "appliesTo": "left deck underside"
    },
    {
      "label": "horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "abutment/pile cap"
    },
    {
      "label": "end spacing",
      "value": "750",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "end spacing",
      "value": "750",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "overall pile cap length",
      "value": "12300",
      "unit": "",
      "appliesTo": "pile cap"
    },
    {
      "label": "filter media thickness",
      "value": "600",
      "unit": "THK.",
      "appliesTo": "filter media"
    },
    {
      "label": "bored cast-in-situ pile diameter",
      "value": "1200",
      "unit": "DIA",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "SECTION A-A"
    }
  ],
  "notes": [
    "POT-PTFE BEARING (TYP.)",
    "RCC SEISMIC STOPPER",
    "STONE PITCHING",
    "INDEPENDENT RETAINING WALL",
    "600 THK. FILTER MEDIA",
    "1200 DIA BORED CAST-IN-SITU PILES"
  ],
  "labels": [
    "A2",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "SECTION A-A",
    "(SCALE 1:150)"
  ],
  "description": "This crop shows SECTION A-A through a bridge end support, including the deck expansion-joint area, abutment seat, bearing, seismic stopper, and piled foundation. A sloping wingwall/retaining element, stone pitching, filter media, and a partial independent retaining wall are also shown."
}

p02_r05 section a aSection

  • wingwall×1sloping retaining wallExtends from the abutment toward the left.

1070 dimension (SQ.)1236 dimension (SK.)80 EXP.GAP (SQ.)92 EXP.GAP (SK)3500 dimension (SQ)230 vertical dimension2650 vertical dimension1500 horizontal dimension+11 more