Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Retaining Wall

2 pages · 7 crops · ×10 · substructure

Matched toRetaining Wallbridge.approach_earthwork_system.retaining_wallon “Retaining Wall”

1 read off the drawings · 6 not established
The class asks forValueHowFrom
LengthLwants m/mmnot establishedNo length dimension is stated for the retaining/toe wall or independent retaining wall. Bridge, span, approach-slab, pile-cap, and other adjacent-element dimensions cannot be assigned to the wall.not found
Wall ThicknessT_wallwants m/mmnot establishedNo wall-thickness dimension is stated. The 600 THK. note applies to filter media, not the retaining wall.not found
HeightHwants m/mmnot establishedNo vertical dimension is identified as the independent retaining wall height. FRL and ground-level values relate to abutments and pier locations and do not establish retaining-wall height.not found
Base WidthW_basewants m/mmnot establishedNo base-width dimension is stated for the retaining wall. Pile-cap and abutment dimensions belong to adjacent foundation/support elements.not found
ThicknessTwants m/mmnot establishedNo retaining-wall thickness is provided. Dimensions labelled 300 THK., 150 THK., and 600 THK. apply respectively to approach slab, PCC levelling course, and filter media.not found
Instance CountNwants count2 countBoth elevation readings explicitly identify two independent retaining walls, one behind each abutment.readp2 · p02_r01p2 · p02_r01 elevation of bridge superstructure
Concrete Gradefcknot establishedThe available concrete-grade notes are truncated and do not state a grade applicable to the retaining wall. PCC M15 is identified for the separate median wall, not the retaining/toe wall.not found

Worked out by openai/gpt-5.6-terra-pro from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

How the sheets named it

Independent retaining wallretaining/toe wallRetaining/toe wallindependent retaining wall

Every dimension read for it18

  • 80000Right-of-way widthnot attributedp1 · p01_r02
  • 40000Right-of-way widthnot attributedp1 · p01_r02
  • 2900Median widthnot attributedp1 · p01_r02
  • 1275Median-side offsetnot attributedp1 · p01_r02
  • 64+400stationnot attributedp1 · p01_r01
  • 64+500stationnot attributedp1 · p01_r01
  • 40000(SQ) 46188(SK) mmHorizontal dimensionnot attributedp2 · p02_r01
  • 46000(SK) 46188(SK) mmHorizontal dimensionnot attributedp2 · p02_r01
  • 37761(SQ) 43602(SK) mmHorizontal dimensionnot attributedp2 · p02_r01
  • 37761(SQ) 43602(SK) mmHorizontal dimensionnot attributedp2 · p02_r01
  • 1200 (min.) mmMinimum vertical distance to HFLnot attributedp2 · p02_r01
  • 506.000m mLWLnot attributedp2 · p02_r01
  • 40000(SQ) 46188(SK)span dimensionnot attributedp2 · p02_r01 elevation of bridge superstructure
  • 46000(SK) 46188(SK)span dimensionnot attributedp2 · p02_r01 elevation of bridge superstructure
  • 37761(SQ) 43602(SK)bridge dimensionnot attributedp2 · p02_r01 elevation of bridge superstructure
  • 37761(SQ) 43602(SK)bridge dimensionnot attributedp2 · p02_r01 elevation of bridge superstructure
  • 1200 mmHFLnot attributedp2 · p02_r01 elevation of bridge superstructure
  • 506.000 mLWLnot attributedp2 · p02_r01 elevation of bridge superstructure

Notes on the sheets that carry it

  • p2POT-PTFE BEARING (TYP.)
  • p2RCC SEISMIC STOPPER
  • p2STONE PITCHING
  • p2INDEPENDENT RETAINING WALL
  • p2600 THK. FILTER MEDIA
  • p21200 DIA BORED CAST-IN-SITU PILES
  • p2300 THK. APPROACH SLAB
  • p2150 THK. PCC LEVELING COURSE
  • p2RCC CRASH BARRIER
  • p2LAUNCHING APRON
  • p2RCC COLUMN PIER (TYP.)
  • p2DECK CONTINUITY
  • p2PRECAST PSC GIRDER (TYP.)
  • p2WALL TYPE ABUTMENT
  • p21200φ RCC CAST IN SITU PILE (TYP.)
  • p21. ALL DIMENSIONS ARE IN MILL... OTHERWISE SPECIFIED.
  • p22. DIMENSIONS ARE NOT TO BE ... FOLLOWED.
  • p23. THIS DRAWING SHALL BE RE... ALIGNMENT DRAWINGS.
  • p24. THE BRIDGE HAS BEEN DES... CLASS 70R + TWO LANE OF 70R OR SV LOADING WHICH...
  • p25. GRADE OF CONCRETE FOR VA... FOLLOWS:-
  • p2• PSC PRECAST GIRDER -
  • p2• R.C.C. CAST IN SITU DEC...
  • p2• R.C.C. END CROSS GIRDER -
  • p2• R.C.C. INTERMEDIATE CROS...
  • p2• BEARING PEDESTAL -
  • p21. ALL DIMENSIONS ARE IN M
  • p2OTHERWISE SPECIFIED.
  • p23. THIS DRAWING SHALL BE RE
  • p2ALIGNMENT DRAWINGS.
  • p24. THE BRIDGE HAS BEEN DES
  • p2CLASS 70R + TWO LANE O
  • p270R OR SV LOADING WHICH
  • p25. GRADE OF CONCRETE FOR
  • p2FOLLOWS:-
  • p2• R.C.C. CAST IN SITU DE
  • p2• R.C.C. INTERMEDIATE C
  • p2• REINFORCEMENT

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

p01_r02

page 1 · bridge_deck_and_foundation_layout_p01_r02
Original
p01_r02
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bridge deck",
      "tag": "",
      "shape": "skewed rectangular",
      "material": "",
      "count": 2,
      "note": "Shown as right-side and left-side bridge deck half plans."
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "skewed rectangular",
      "material": "",
      "count": 4,
      "note": "Labeled APPROACH SLAB at the deck ends."
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear",
      "material": "RCC",
      "count": null,
      "note": "Shown along deck edges and median-side edges; labeled RCC CRASH BARRIER."
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Only centreline locations are identified as C/L OF EXP. JOINT."
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 208,
      "note": "Circular pile symbols are shown in the foundation-level half plan; the right side of this view is cropped."
    },
    {
      "name": "Foundation pile cap / strip cap",
      "tag": "",
      "shape": "skewed rectangular",
      "material": "",
      "count": null,
      "note": "Long skewed foundation strips containing circular pile symbols are shown in the foundation-level half plan."
    },
    {
      "name": "Independent retaining wall",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": "Partial element at upper-right edge, labeled only partially as INDEPENDENT RETAI..."
    }
  ],
  "measurements": [
    {
      "label": "Right-of-way width",
      "value": "80000",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Right-of-way width",
      "value": "40000",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Bridge width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Bridge (right side)"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "Bridge (right side)"
    },
    {
      "label": "Footpath",
      "value": "1500",
      "unit": "",
      "appliesTo": "Bridge (right side)"
    },
    {
      "label": "Footpath offset",
      "value": "100",
      "unit": "",
      "appliesTo": "Bridge (right side)"
    },
    {
      "label": "Edge dimension",
      "value": "450",
      "unit": "",
      "appliesTo": "Bridge (right side)"
    },
    {
      "label": "Median width",
      "value": "2900",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Bridge width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Bridge (left side)"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "Bridge (left side)"
    },
    {
      "label": "Footpath",
      "value": "1500",
      "unit": "",
      "appliesTo": "Bridge (left side)"
    },
    {
      "label": "Footpath offset",
      "value": "100",
      "unit": "",
      "appliesTo": "Bridge (left side)"
    },
    {
      "label": "Edge dimension",
      "value": "450",
      "unit": "",
      "appliesTo": "Bridge (left side)"
    },
    {
      "label": "Expansion-joint-to-pier dimension",
      "value": "40000(SQ) 46189(SK)",
      "unit": "",
      "appliesTo": "Deck plan"
    },
    {
      "label": "Expansion-joint-to-pier dimension",
      "value": "37761(SQ) 43603(SK)",
      "unit": "",
      "appliesTo": "Deck plan"
    },
    {
      "label": "End dimension",
      "value": "1070(SQ)",
      "unit": "",
      "appliesTo": "Deck plan"
    },
    {
      "label": "End dimension",
      "value": "1236(SK)",
      "unit": "",
      "appliesTo": "Deck plan"
    },
    {
      "label": "End dimension",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "Deck plan"
    },
    {
      "label": "End dimension",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "Deck plan"
    },
    {
      "label": "Crash-barrier spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "RCC crash barrier"
    },
    {
      "label": "Approach slab length",
      "value": "3500",
      "unit": "",
      "appliesTo": "Approach slab"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "",
      "appliesTo": "Deck plan"
    },
    {
      "label": "Deck transverse segment",
      "value": "3500",
      "unit": "",
      "appliesTo": "Bridge deck"
    },
    {
      "label": "Bridge width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Bridge deck"
    },
    {
      "label": "Median-side offset",
      "value": "1275",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Foundation transverse spacing",
      "value": "3750",
      "unit": "",
      "appliesTo": "Foundation-level plan"
    },
    {
      "label": "Foundation width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Foundation-level plan"
    },
    {
      "label": "Foundation edge offset",
      "value": "775",
      "unit": "",
      "appliesTo": "Foundation-level plan"
    },
    {
      "label": "Scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "Half plan views"
    }
  ],
  "notes": [],
  "labels": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "TO KHANDWA",
    "A1",
    "P1",
    "C/L OF EXP. JOINT",
    "C/L OF MEDIAN",
    "BRIDGE (RIGHT SIDE)",
    "BRIDGE (LEFT SIDE)",
    "APPROACH SLAB",
    "RCC CRASH BARRIER",
    "MEDIAN PCC",
    "INDEPENDENT RETAI...",
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOWING FOUNDATION LEVEL",
    "(SCALE 1:300)"
  ],
  "description": "This crop shows a plan drawing divided into a half plan showing deck level on the left and a half plan showing foundation level on the right. It documents two skewed bridge decks, their approach slabs, crash barriers, expansion-joint centreline references, roadway and median dimensions, and a partial pile-supported foundation layout."
}

p01_r02Plan

  • Independent retaining wallrectangularPartial element at upper-right edge, labeled only partially as INDEPENDENT RETAI...

80000 Right-of-way width40000 Right-of-way width16550 Bridge width13500 Carriageway width1500 Footpath100 Footpath offset450 Edge dimension2900 Median width+21 more

crop

p01_r01

page 1 · site_alignment_and_row_p01_r01
Original
p01_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "proposed structure",
      "tag": "MJB",
      "shape": "rectangular hatched footprint",
      "material": "",
      "count": 1,
      "note": "Shown crossing the roadway alignment; identified as new construction."
    },
    {
      "name": "roadway",
      "tag": "",
      "shape": "linear divided carriageway",
      "material": "",
      "count": 1,
      "note": "Continues toward Dewas and Khandwa."
    },
    {
      "name": "retaining/toe wall",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Two locations are labelled RET./TOE WALL within the key plan."
    },
    {
      "name": "earthen drain",
      "tag": "",
      "shape": "linear channel",
      "material": "earth",
      "count": 1,
      "note": "Labelled Earthen Drain."
    },
    {
      "name": "median wall",
      "tag": "",
      "shape": "linear rectangular wall",
      "material": "PCC M15",
      "count": 1,
      "note": "Only a partial adjacent detail is visible."
    },
    {
      "name": "retaining wall",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Only a partial adjacent drawing and partial label are visible at the left edge."
    }
  ],
  "measurements": [
    {
      "label": "PROPOSED CH:",
      "value": "64+412",
      "unit": "",
      "appliesTo": "MJB"
    },
    {
      "label": "PROPOSED SPAN",
      "value": "2x40",
      "unit": "m",
      "appliesTo": "MJB"
    },
    {
      "label": "SKEW",
      "value": "30",
      "unit": "°",
      "appliesTo": "MJB"
    },
    {
      "label": "station",
      "value": "64+400",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "station",
      "value": "64+500",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "SCALE",
      "value": "1:2000",
      "unit": "",
      "appliesTo": "KEY PLAN"
    }
  ],
  "notes": [],
  "labels": [
    "TO DEWAS",
    "ROW",
    "TO KHANDWA",
    "Shipa River",
    "Earthen Drain",
    "Agriculture Land",
    "KEY PLAN",
    "(SCALE 1:2000)",
    "PROPOSED CH:",
    "STRUCTURE TYPE",
    "PROPOSED SPAN",
    "SKEW",
    "PROPOSAL",
    "New Construction",
    "MEDIAN WALL",
    "PCC M15",
    "PENDENT RETAINING WALL (partial)"
  ],
  "description": "This crop shows a key plan of a roadway corridor and a proposed MJB structure at chainage 64+412. The structure is shown as new construction with a hatched rectangular footprint over the Shipa River area, with retaining/toe walls and an earthen drain indicated near the approach alignment."
}

p01_r01Plan

  • retaining/toe wall×2linearTwo locations are labelled RET./TOE WALL within the key plan.
  • retaining wallOnly a partial adjacent drawing and partial label are visible at the left edge.

64+412 PROPOSED CH:2x40 m PROPOSED SPAN30 ° SKEW64+400 station64+500 station1:2000 SCALE

crop

p01_r01 key plan scale 1 2000

page 1 · structural_drawings_pkg_1_7a22288d85c64bc6bd8c641faee2f453_p01_r01_key_plan_scale_1_2000
Original
p01_r01 key plan scale 1 2000
{
  "view": "Plan",
  "objects": [
    {
      "name": "Proposed bridge structure",
      "tag": "",
      "shape": "rectangular plan footprint, skewed",
      "material": "",
      "count": 1,
      "note": "Hatched crossing shown over the river/road corridor; schedule identifies structure type as MJBR."
    },
    {
      "name": "Roadway",
      "tag": "",
      "shape": "linear divided carriageway",
      "material": "",
      "count": 1,
      "note": "Road corridor passes beneath/adjacent to the proposed structure footprint."
    },
    {
      "name": "Retaining/toe wall",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Two boxed callouts read \"RET./ TOE WALL\"."
    },
    {
      "name": "Median wall",
      "tag": "",
      "shape": "linear",
      "material": "PCC M15",
      "count": null,
      "note": "Only a partial adjacent detail is visible at the lower-left edge of the crop."
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Pile callout is shown at pier station 64+500; pile layout is not visible in this crop."
    }
  ],
  "measurements": [
    {
      "label": "Proposed chainage",
      "value": "64+412",
      "unit": "",
      "appliesTo": "Proposed bridge structure"
    },
    {
      "label": "Proposed span",
      "value": "2x40m",
      "unit": "",
      "appliesTo": "Proposed bridge structure"
    },
    {
      "label": "Skew",
      "value": "30°",
      "unit": "",
      "appliesTo": "Proposed bridge structure"
    },
    {
      "label": "Station",
      "value": "64+400",
      "unit": "",
      "appliesTo": "Roadway"
    },
    {
      "label": "Station",
      "value": "64+500",
      "unit": "",
      "appliesTo": "Roadway / pier callout"
    },
    {
      "label": "Pile diameter",
      "value": "0.6m",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "Scale",
      "value": "1:2000",
      "unit": "",
      "appliesTo": "KEY PLAN"
    }
  ],
  "notes": [],
  "labels": [
    "TO DEWAS",
    "ROW",
    "TO KHANDWA",
    "PROPOSED CH:",
    "STRUCTURE TYPE",
    "PROPOSED SPAN",
    "SKEW",
    "PROPOSAL",
    "New Construction",
    "MJBR",
    "Sipra River",
    "RET./ TOE WALL",
    "Agriculture Land",
    "KEY PLAN",
    "(SCALE 1:2000)",
    "N",
    "E",
    "S",
    "W",
    "MEDIAN WALL",
    "PCC M15"
  ],
  "description": "This crop principally shows a key plan for a proposed skewed two-span MJBR crossing at proposed chainage 64+412. The plan shows the road right-of-way, river crossing, retaining/toe-wall callouts, stations 64+400 and 64+500, and a partial median-wall detail at the lower-left edge."
}

p01_r01 key plan scale 1 2000Plan

  • Retaining/toe wall×2linearTwo boxed callouts read "RET./ TOE WALL".

64+412 Proposed chainage2x40m Proposed span30° Skew64+400 Station64+500 Station0.6m Pile diameter1:2000 Scale

Page 2

crop

p02_r05

page 2 · abutment_and_retaining_wall_p02_r05
Original
p02_r05
{
  "view": "Section",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A2",
      "shape": "rectangular stem and footing",
      "material": "",
      "count": 1,
      "note": "Shown supporting the bridge end at the expansion joint."
    },
    {
      "name": "Bridge deck slab",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bridge girder",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Only a partial girder/end portion is visible at left."
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear joint",
      "material": "",
      "count": 1,
      "note": "At bridge centreline/end of deck."
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "PTFE",
      "count": 1,
      "note": "Called out as POT-PTFE BEARING (TYP.)."
    },
    {
      "name": "Seismic stopper",
      "tag": "",
      "shape": "rectangular",
      "material": "RCC",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Dashed outline beneath the abutment."
    },
    {
      "name": "Bored cast-in-situ pile",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": "Pile positions are shown below the pile cap."
    },
    {
      "name": "Independent retaining wall",
      "tag": "",
      "shape": "vertical rectangular wall",
      "material": "",
      "count": 1,
      "note": "Located to the right of the abutment."
    },
    {
      "name": "Stone pitching",
      "tag": "",
      "shape": "irregular pitched surface",
      "material": "stone",
      "count": 1,
      "note": "Shown at the retaining-wall side."
    },
    {
      "name": "Filter media",
      "tag": "",
      "shape": "irregular zone",
      "material": "",
      "count": 1,
      "note": "Behind/below the stone pitching."
    },
    {
      "name": "Embankment",
      "tag": "",
      "shape": "sloping",
      "material": "",
      "count": 1,
      "note": "Slope marked 1 vertical to 2 horizontal."
    }
  ],
  "measurements": [
    {
      "label": "offset to C OF BRG.",
      "value": "1070 (SQ.)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "offset to C OF BRG.",
      "value": "1236 (SK.)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "EXP.GAP",
      "value": "80(SQ.)",
      "unit": "",
      "appliesTo": "Expansion joint"
    },
    {
      "label": "EXP.GAP",
      "value": "92(SK)",
      "unit": "",
      "appliesTo": "Expansion joint"
    },
    {
      "label": "deck/slab vertical dimension",
      "value": "230",
      "unit": "",
      "appliesTo": "Bridge deck slab"
    },
    {
      "label": "vertical dimension",
      "value": "2650",
      "unit": "",
      "appliesTo": "Bridge girder"
    },
    {
      "label": "horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "Bridge girder"
    },
    {
      "label": "horizontal dimension",
      "value": "2850",
      "unit": "",
      "appliesTo": "Bridge girder"
    },
    {
      "label": "horizontal dimension",
      "value": "3500(SQ)",
      "unit": "",
      "appliesTo": "Bridge deck slab"
    },
    {
      "label": "horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "Abutment"
    },
    {
      "label": "pile spacing/end offset",
      "value": "750",
      "unit": "",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "pile spacing/end offset",
      "value": "750",
      "unit": "",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "pile cap length",
      "value": "12300",
      "unit": "",
      "appliesTo": "Pile cap"
    },
    {
      "label": "embankment slope",
      "value": "1:2",
      "unit": "",
      "appliesTo": "Embankment"
    },
    {
      "label": "filter media thickness",
      "value": "600",
      "unit": "THK.",
      "appliesTo": "Filter media"
    },
    {
      "label": "pile diameter",
      "value": "1200",
      "unit": "DIA",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "SECTION A-A"
    }
  ],
  "notes": [
    "POT-PTFE BEARING (TYP.)",
    "RCC SEISMIC STOPPER",
    "STONE PITCHING",
    "INDEPENDENT RETAINING WALL",
    "600 THK. FILTER MEDIA",
    "1200 DIA BORED CAST-IN-SITU PILES"
  ],
  "labels": [
    "A2",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "SECTION A-A",
    "(SCALE 1:150)"
  ],
  "description": "This crop shows SECTION A-A through abutment A2 at the bridge expansion-joint end. It documents the deck end, bearing and RCC seismic stopper, abutment and piled foundation, together with the adjacent sloping embankment and independent retaining wall treatment."
}

p02_r05Section

  • Independent retaining wall×1vertical rectangular wallLocated to the right of the abutment.

1070 (SQ.) offset to C OF BRG.1236 (SK.) offset to C OF BRG.80(SQ.) EXP.GAP92(SK) EXP.GAP230 deck/slab vertical dimension2650 vertical dimension1500 horizontal dimension2850 horizontal dimension+12 more

crop

p02_r01

page 2 · bridge_superstructure_p02_r01
Original
p02_r01
{
  "view": "Elevation",
  "objects": [
    {
      "name": "Wall type abutment",
      "tag": "A1",
      "shape": "rectangular wall",
      "material": "",
      "count": 1,
      "note": "Left abutment shown."
    },
    {
      "name": "Wall type abutment",
      "tag": "A2",
      "shape": "rectangular wall",
      "material": "",
      "count": 1,
      "note": "Right abutment shown."
    },
    {
      "name": "RCC column pier",
      "tag": "P1",
      "shape": "rectangular column",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Marked “(TYP.)”."
    },
    {
      "name": "Precast PSC girder",
      "tag": "",
      "shape": "rectangular elevation profile",
      "material": "precast PSC",
      "count": 6,
      "note": "Marked “(TYP.)”; three girders are visible in each span."
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "continuous linear barrier",
      "material": "reinforced concrete",
      "count": null,
      "note": "Shown along the deck."
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "FR",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "Marked “(TYP.)” at abutment locations."
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "FX",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown at the pier."
    },
    {
      "name": "Deck continuity",
      "tag": "",
      "shape": "rectangular joint/diaphragm",
      "material": "",
      "count": 1,
      "note": "Shown over pier P1."
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": 2,
      "note": "One at each end of bridge."
    },
    {
      "name": "PCC levelling course",
      "tag": "",
      "shape": "horizontal layer",
      "material": "PCC",
      "count": 2,
      "note": "Below approach slabs."
    },
    {
      "name": "Launching apron",
      "tag": "",
      "shape": "sloping and horizontal apron",
      "material": "",
      "count": 2,
      "note": "One adjacent to each abutment."
    },
    {
      "name": "Stone pitching",
      "tag": "",
      "shape": "sloping protection layer",
      "material": "stone",
      "count": 2,
      "note": "At both abutments."
    },
    {
      "name": "Independent retaining wall",
      "tag": "",
      "shape": "vertical wall",
      "material": "",
      "count": 2,
      "note": "One behind each abutment."
    },
    {
      "name": "Filter media",
      "tag": "",
      "shape": "layer",
      "material": "",
      "count": 2,
      "note": "Marked 600 THK."
    },
    {
      "name": "Pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "One under each abutment and one under pier P1."
    },
    {
      "name": "RCC cast in situ pile",
      "tag": "",
      "shape": "circular pile",
      "material": "reinforced concrete",
      "count": 8,
      "note": "Marked “(TYP.)”; three visible below each abutment cap and two below pier cap."
    }
  ],
  "measurements": [
    {
      "label": "Expansion gap",
      "value": "80(SQ.) 92(SK)",
      "unit": "mm",
      "appliesTo": "A1"
    },
    {
      "label": "Expansion gap",
      "value": "80(SQ.) 92(SK)",
      "unit": "mm",
      "appliesTo": "A2"
    },
    {
      "label": "Horizontal dimension",
      "value": "40000(SQ) 46188(SK)",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "Horizontal dimension",
      "value": "46000(SK) 46188(SK)",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "Horizontal dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "Horizontal dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "Distance from C OF BRG.",
      "value": "1070(SQ) 1236(SK)",
      "unit": "mm",
      "appliesTo": "A1"
    },
    {
      "label": "Distance from C OF BRG.",
      "value": "1070(SQ) 1236(SK)",
      "unit": "mm",
      "appliesTo": "A2"
    },
    {
      "label": "Distance at pier",
      "value": "1170(SQ) 1350(SK)",
      "unit": "mm",
      "appliesTo": "P1"
    },
    {
      "label": "Distance at pier",
      "value": "1170(SQ) 1350(SK)",
      "unit": "mm",
      "appliesTo": "P1"
    },
    {
      "label": "Approach slab thickness",
      "value": "300",
      "unit": "mm",
      "appliesTo": "A1, A2"
    },
    {
      "label": "PCC levelling course thickness",
      "value": "150",
      "unit": "mm",
      "appliesTo": "A1, A2"
    },
    {
      "label": "Minimum vertical distance to HFL",
      "value": "1200 (min.)",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "LWL",
      "value": "506.000m",
      "unit": "m",
      "appliesTo": ""
    },
    {
      "label": "Filter media thickness",
      "value": "600",
      "unit": "mm",
      "appliesTo": "Filter media"
    },
    {
      "label": "Abutment pile-cap end projection",
      "value": "750",
      "unit": "mm",
      "appliesTo": "Pile cap"
    },
    {
      "label": "Abutment pile spacing",
      "value": "3600",
      "unit": "mm",
      "appliesTo": "Pile cap"
    },
    {
      "label": "Abutment pile-cap overall width",
      "value": "12300",
      "unit": "mm",
      "appliesTo": "Pile cap"
    },
    {
      "label": "Pier pile-cap end projection",
      "value": "750",
      "unit": "mm",
      "appliesTo": "P1"
    },
    {
      "label": "Pier pile spacing",
      "value": "3600",
      "unit": "mm",
      "appliesTo": "P1"
    },
    {
      "label": "Pier pile-cap overall width",
      "value": "5100",
      "unit": "mm",
      "appliesTo": "P1"
    },
    {
      "label": "Cast in situ pile diameter",
      "value": "1200φ",
      "unit": "mm",
      "appliesTo": "RCC cast in situ pile"
    },
    {
      "label": "Chainage LHS",
      "value": "64+360.197",
      "unit": "km.",
      "appliesTo": "A1"
    },
    {
      "label": "Chainage RHS",
      "value": "64+371.487",
      "unit": "km.",
      "appliesTo": "A1"
    },
    {
      "label": "FRL LHS",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "FRL RHS",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "Ground level LHS",
      "value": "509.560",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "Ground level RHS",
      "value": "509.155",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "Chainage LHS",
      "value": "64+406.385",
      "unit": "km.",
      "appliesTo": "P1"
    },
    {
      "label": "Chainage RHS",
      "value": "64+417.675",
      "unit": "km.",
      "appliesTo": "P1"
    },
    {
      "label": "FRL LHS",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "FRL RHS",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "Ground level LHS",
      "value": "503.816",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "Ground level RHS",
      "value": "503.883",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "Chainage LHS",
      "value": "64+452.573",
      "unit": "km.",
      "appliesTo": "A2"
    },
    {
      "label": "Chainage RHS",
      "value": "64+463.814",
      "unit": "km.",
      "appliesTo": "A2"
    },
    {
      "label": "FRL LHS",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "FRL RHS",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "Ground level LHS",
      "value": "511.891",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "Ground level RHS",
      "value": "512.668",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "Drawing scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "Elevation"
    }
  ],
  "notes": [
    "300 THK. APPROACH SLAB",
    "150 THK. PCC LEVELING COURSE",
    "RCC CRASH BARRIER",
    "POT-PTFE BEARING (TYP.)",
    "LAUNCHING APRON",
    "STONE PITCHING",
    "INDEPENDENT RETAINING WALL",
    "600 THK. FILTER MEDIA",
    "RCC COLUMN PIER (TYP.)",
    "DECK CONTINUITY",
    "PRECAST PSC GIRDER (TYP.)",
    "WALL TYPE ABUTMENT",
    "1200φ RCC CAST IN SITU PILE (TYP.)",
    "1. ALL DIMENSIONS ARE IN MILL... OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT TO BE ... FOLLOWED.",
    "3. THIS DRAWING SHALL BE RE... ALIGNMENT DRAWINGS.",
    "4. THE BRIDGE HAS BEEN DES... CLASS 70R + TWO LANE OF 70R OR SV LOADING WHICH...",
    "5. GRADE OF CONCRETE FOR VA... FOLLOWS:-",
    "• PSC PRECAST GIRDER -",
    "• R.C.C. CAST IN SITU DEC...",
    "• R.C.C. END CROSS GIRDER -",
    "• R.C.C. INTERMEDIATE CROS...",
    "• BEARING PEDESTAL -"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "HFL=",
    "LWL=506.000m",
    "CHAINAGE IN (km.)",
    "LHS",
    "RHS",
    "FRL. (m)",
    "MAIN CARRIAGEWAY",
    "GROUND LEVEL (m)",
    "ELEVATION",
    "(SCALE 1:300)",
    "NOTES:"
  ],
  "description": "This crop is an elevation of a bridge superstructure and its supporting substructure, extending between abutments A1 and A2 with pier P1 at the centre. It shows PSC girders, bearings, deck barriers, approach arrangements, abutment and pier foundations, retaining walls, stone pitching, and an elevation/chainage table."
}

p02_r01Elevation

  • Independent retaining wall×2vertical wallOne behind each abutment.

80(SQ.) 92(SK) mm Expansion gap80(SQ.) 92(SK) mm Expansion gap40000(SQ) 46188(SK) mm Horizontal dimension46000(SK) 46188(SK) mm Horizontal dimension37761(SQ) 43602(SK) mm Horizontal dimension37761(SQ) 43602(SK) mm Horizontal dimension1070(SQ) 1236(SK) mm Distance from C OF BRG.1070(SQ) 1236(SK) mm Distance from C OF BRG.+33 more

crop

p02_r01 elevation of bridge superstructure

page 2 · structural_drawings_pkg_1_7a22288d85c64bc6bd8c641faee2f453_p02_r01_elevation_of_bridge_superstructure
Original
p02_r01 elevation of bridge superstructure
{
  "view": "Elevation",
  "objects": [
    {
      "name": "wall type abutment",
      "tag": "A1",
      "shape": "rectangular with sloping wingwall/return wall",
      "material": "",
      "count": 1,
      "note": "Left abutment."
    },
    {
      "name": "wall type abutment",
      "tag": "A2",
      "shape": "rectangular with sloping wingwall/return wall",
      "material": "",
      "count": 1,
      "note": "Right abutment."
    },
    {
      "name": "RCC column pier",
      "tag": "P1",
      "shape": "rectangular column",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Marked RCC COLUMN PIER (TYP.)."
    },
    {
      "name": "precast PSC girder",
      "tag": "",
      "shape": "girder",
      "material": "precast prestressed concrete",
      "count": null,
      "note": "Marked PRECAST PSC GIRDER (TYP.)."
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 4,
      "note": "Marked POT-PTFE BEARING (TYP.)."
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear barrier",
      "material": "reinforced concrete",
      "count": 2,
      "note": ""
    },
    {
      "name": "deck continuity",
      "tag": "",
      "shape": "linear deck connection",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "expansion joint",
      "tag": "",
      "shape": "linear joint",
      "material": "",
      "count": 2,
      "note": "Located at the two abutment ends."
    },
    {
      "name": "approach slab",
      "tag": "",
      "shape": "sloping slab",
      "material": "",
      "count": 2,
      "note": "Marked 300 THK. APPROACH SLAB."
    },
    {
      "name": "PCC levelling course",
      "tag": "",
      "shape": "horizontal layer",
      "material": "plain cement concrete",
      "count": 2,
      "note": "Marked 150 THK. PCC LEVELLING COURSE."
    },
    {
      "name": "independent retaining wall",
      "tag": "",
      "shape": "sloping wall",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "stone pitching",
      "tag": "",
      "shape": "sloping surface protection",
      "material": "stone",
      "count": 2,
      "note": "Associated with 600 THK. FILTER MEDIA."
    },
    {
      "name": "filter media",
      "tag": "",
      "shape": "layer",
      "material": "",
      "count": 2,
      "note": "Marked 600 THK. FILTER MEDIA."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "Two abutment pile caps and one pier pile cap are visible."
    },
    {
      "name": "RCC cast in situ pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 10,
      "note": "Marked 1200ø RCC CAST IN SITU PILE (TYP.)."
    }
  ],
  "measurements": [
    {
      "label": "span dimension",
      "value": "40000(SQ) 46188(SK)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "span dimension",
      "value": "46000(SK) 46188(SK)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "bridge dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "bridge dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "EXP.GAP",
      "value": "80(SQ.) 92(SK)",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "EXP.GAP",
      "value": "80(SQ.) 92(SK)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "dimension",
      "value": "1070(SQ) 1236(SK)",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "dimension",
      "value": "1170(SQ) 1350(SK)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "dimension",
      "value": "1170(SQ) 1350(SK)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "dimension",
      "value": "1070(SQ) 1236(SK)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "approach slab thickness",
      "value": "300",
      "unit": "THK.",
      "appliesTo": "approach slab"
    },
    {
      "label": "PCC levelling course thickness",
      "value": "150",
      "unit": "THK.",
      "appliesTo": "PCC levelling course"
    },
    {
      "label": "filter media thickness",
      "value": "600",
      "unit": "THK.",
      "appliesTo": "filter media"
    },
    {
      "label": "HFL",
      "value": "1200",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "LWL",
      "value": "506.000",
      "unit": "m",
      "appliesTo": ""
    },
    {
      "label": "pile diameter",
      "value": "1200ø",
      "unit": "",
      "appliesTo": "RCC cast in situ pile"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile cap overall dimension",
      "value": "12300",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pile cap overall dimension",
      "value": "5100",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "pile cap overall dimension",
      "value": "12300",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "chainage LHS",
      "value": "64+360.197",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "chainage RHS",
      "value": "64+371.487",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "FRL main carriageway LHS",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "FRL main carriageway RHS",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "ground level main carriageway LHS",
      "value": "509.560",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "ground level main carriageway RHS",
      "value": "509.155",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "chainage",
      "value": "64+406.385",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "chainage",
      "value": "64+417.675",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "FRL main carriageway",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "FRL main carriageway",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "ground level main carriageway",
      "value": "503.816",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "ground level main carriageway",
      "value": "503.883",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "chainage LHS",
      "value": "64+452.573",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "chainage RHS",
      "value": "64+463.814",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "FRL main carriageway LHS",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "FRL main carriageway RHS",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "ground level main carriageway LHS",
      "value": "511.891",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "ground level main carriageway RHS",
      "value": "512.668",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "drawing scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "ELEVATION"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS ARE IN M",
    "OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT TO BE FOLLOWED.",
    "3. THIS DRAWING SHALL BE RE",
    "ALIGNMENT DRAWINGS.",
    "4. THE BRIDGE HAS BEEN DES",
    "CLASS 70R + TWO LANE O",
    "70R OR SV LOADING WHICH",
    "5. GRADE OF CONCRETE FOR",
    "FOLLOWS:-",
    "• PSC PRECAST GIRDER",
    "• R.C.C. CAST IN SITU DE",
    "• R.C.C. END CROSS GIRDER",
    "• R.C.C. INTERMEDIATE C",
    "• REINFORCEMENT"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "FR",
    "ELEVATION",
    "(SCALE 1:300)",
    "CHAINAGE IN (km.)",
    "LHS",
    "RHS",
    "FRL. (m) MAIN CARRIAGEWAY",
    "GROUND LEVEL (m) MAIN CARRIAGEWAY",
    "NOTES:"
  ],
  "description": "This crop shows an elevation of a two-span bridge between abutments A1 and A2, with central RCC column pier P1. It documents the superstructure, bearings, approach slabs, abutment and retaining-wall protection, pile foundations, water levels, and chainage/elevation data."
}

p02_r01 elevation of bridge superstructureElevation

  • independent retaining wall×2sloping wall

40000(SQ) 46188(SK) span dimension46000(SK) 46188(SK) span dimension37761(SQ) 43602(SK) bridge dimension37761(SQ) 43602(SK) bridge dimension80(SQ.) 92(SK) EXP.GAP80(SQ.) 92(SK) EXP.GAP1070(SQ) 1236(SK) dimension1170(SQ) 1350(SK) dimension+43 more

crop

p02_r05 section a a

page 2 · structural_drawings_pkg_1_7a22288d85c64bc6bd8c641faee2f453_p02_r05_section_a_a
Original
p02_r05 section a a
{
  "view": "Section",
  "objects": [
    {
      "name": "bridge deck slab",
      "tag": "",
      "shape": "rectangular horizontal slab",
      "material": "",
      "count": 1,
      "note": "Partial deck section is shown."
    },
    {
      "name": "expansion joint",
      "tag": "",
      "shape": "narrow vertical joint",
      "material": "",
      "count": 1,
      "note": "Located at C OF EXP. JOINT."
    },
    {
      "name": "abutment",
      "tag": "",
      "shape": "reinforced concrete wall with seat",
      "material": "",
      "count": 1,
      "note": "Supported on a pile cap."
    },
    {
      "name": "wingwall",
      "tag": "",
      "shape": "sloping retaining wall",
      "material": "",
      "count": 1,
      "note": "Extends from the abutment toward the left."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown below the abutment."
    },
    {
      "name": "bored cast-in-situ piles",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": "Pile locations are shown beneath the pile cap."
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Marked TYP."
    },
    {
      "name": "RCC seismic stopper",
      "tag": "",
      "shape": "rectangular block",
      "material": "RCC",
      "count": 1,
      "note": ""
    },
    {
      "name": "independent retaining wall",
      "tag": "",
      "shape": "vertical wall",
      "material": "",
      "count": 1,
      "note": "Partially shown at the right side of the section."
    },
    {
      "name": "stone pitching",
      "tag": "",
      "shape": "sloping layer",
      "material": "stone",
      "count": 1,
      "note": ""
    },
    {
      "name": "filter media",
      "tag": "",
      "shape": "tapered layer",
      "material": "",
      "count": 1,
      "note": "Shown adjacent to the independent retaining wall."
    },
    {
      "name": "reinforcement bar",
      "tag": "1",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": "Bar mark is shown within the sloping wall."
    },
    {
      "name": "reinforcement bar",
      "tag": "2",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": "Bar mark is shown within the sloping wall."
    }
  ],
  "measurements": [
    {
      "label": "dimension (SQ.)",
      "value": "1070",
      "unit": "",
      "appliesTo": "C OF BRG."
    },
    {
      "label": "dimension (SK.)",
      "value": "1236",
      "unit": "",
      "appliesTo": "C OF BRG."
    },
    {
      "label": "EXP.GAP (SQ.)",
      "value": "80",
      "unit": "",
      "appliesTo": "expansion joint"
    },
    {
      "label": "EXP.GAP (SK)",
      "value": "92",
      "unit": "",
      "appliesTo": "expansion joint"
    },
    {
      "label": "dimension (SQ)",
      "value": "3500",
      "unit": "",
      "appliesTo": "deck/abutment section"
    },
    {
      "label": "vertical dimension",
      "value": "230",
      "unit": "",
      "appliesTo": "deck end"
    },
    {
      "label": "vertical dimension",
      "value": "2650",
      "unit": "",
      "appliesTo": "deck end"
    },
    {
      "label": "horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "left deck underside"
    },
    {
      "label": "horizontal dimension",
      "value": "2850",
      "unit": "",
      "appliesTo": "left deck underside"
    },
    {
      "label": "horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "abutment/pile cap"
    },
    {
      "label": "end spacing",
      "value": "750",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "end spacing",
      "value": "750",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "overall pile cap length",
      "value": "12300",
      "unit": "",
      "appliesTo": "pile cap"
    },
    {
      "label": "filter media thickness",
      "value": "600",
      "unit": "THK.",
      "appliesTo": "filter media"
    },
    {
      "label": "bored cast-in-situ pile diameter",
      "value": "1200",
      "unit": "DIA",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "SECTION A-A"
    }
  ],
  "notes": [
    "POT-PTFE BEARING (TYP.)",
    "RCC SEISMIC STOPPER",
    "STONE PITCHING",
    "INDEPENDENT RETAINING WALL",
    "600 THK. FILTER MEDIA",
    "1200 DIA BORED CAST-IN-SITU PILES"
  ],
  "labels": [
    "A2",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "SECTION A-A",
    "(SCALE 1:150)"
  ],
  "description": "This crop shows SECTION A-A through a bridge end support, including the deck expansion-joint area, abutment seat, bearing, seismic stopper, and piled foundation. A sloping wingwall/retaining element, stone pitching, filter media, and a partial independent retaining wall are also shown."
}

p02_r05 section a aSection

  • independent retaining wall×1vertical wallPartially shown at the right side of the section.

1070 dimension (SQ.)1236 dimension (SK.)80 EXP.GAP (SQ.)92 EXP.GAP (SK)3500 dimension (SQ)230 vertical dimension2650 vertical dimension1500 horizontal dimension+11 more