Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

POT-PTFE Bearing

2 pages · 9 crops · ×36 · superstructure

Matched toPot Bearingbridge.superstructure.bearing_system.pot_bearingon “POT-PTFE Bearing”

1 read off the drawings · 5 not established
The class asks forValueHowFrom
LengthLwants m/mmnot establishedNo written dimension identifies the POT-PTFE bearing length. Dimensions shown in the bearing sections apply to adjacent girders, deck, seismic stopper, pier cap, or offsets to C OF BRG., not to the bearing itself.not found
WidthWwants m/mmnot establishedNo written dimension identifies the POT-PTFE bearing width. The 1500 dimension in the pier section is identified as the seismic stopper width in the corresponding reading, not a bearing dimension.not found
HeightHwants m/mmnot establishedThe note states that pier-cap level considers 400 mm combined depth of bearing and pedestal, and refers to bearings less than 200 mm high being adjusted within a 200 mm pedestal. Neither statement establishes the actual bearing height.not found
Bearing CountN_brgwants countnot establishedThe readings show differing bearing counts for particular views and support arrangements: 3 FR plus 1 FX in the elevation reading, 4 bearing symbols in another elevation reading, and 12 bearing blocks at the pier cross-section. These do not unambiguously establish one total POT-PTFE bearing count for the bridge/item.not found
Rated CapacityCAPwants kN/MNnot establishedNo bearing rated capacity in kN or MN is stated. The listed working loads apply to piles, not POT-PTFE bearings.not found
Material TypeMATPTFE -The bearing is called out as a POT-PTFE bearing, and the section reading explicitly identifies its material as PTFE.readp2 · p02_r05p2 · p02_r04 section b b

Worked out by openai/gpt-5.6-terra-pro from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

How the sheets named it

BearingbearingFRFX

Every dimension read for it18

  • 40000(SQ) 46188(SK) mmHorizontal dimensionnot attributedp2 · p02_r01
  • 46000(SK) 46188(SK) mmHorizontal dimensionnot attributedp2 · p02_r01
  • 37761(SQ) 43602(SK) mmHorizontal dimensionnot attributedp2 · p02_r01
  • 37761(SQ) 43602(SK) mmHorizontal dimensionnot attributedp2 · p02_r01
  • 1200 (min.) mmMinimum vertical distance to HFLnot attributedp2 · p02_r01
  • 506.000m mLWLnot attributedp2 · p02_r01
  • 200 mmBearing height thresholdp2 · p02_r03
  • 1170(SQ)horizontal dimension from C OF BRG.not attributedp2 · pier_p1
  • 1350(SK)horizontal dimension from C OF BRG.not attributedp2 · pier_p1
  • 1170(SQ)horizontal dimension from C OF BRG.not attributedp2 · pier_p1
  • 1350(SK)horizontal dimension from C OF BRG.not attributedp2 · pier_p1
  • 1500bearing/seismic stopper horizontal dimensionp2 · pier_p1
  • 40000(SQ) 46188(SK)span dimensionnot attributedp2 · p02_r01 elevation of bridge superstructure
  • 46000(SK) 46188(SK)span dimensionnot attributedp2 · p02_r01 elevation of bridge superstructure
  • 37761(SQ) 43602(SK)bridge dimensionnot attributedp2 · p02_r01 elevation of bridge superstructure
  • 37761(SQ) 43602(SK)bridge dimensionnot attributedp2 · p02_r01 elevation of bridge superstructure
  • 1200 mmHFLnot attributedp2 · p02_r01 elevation of bridge superstructure
  • 506.000 mLWLnot attributedp2 · p02_r01 elevation of bridge superstructure

Notes on the sheets that carry it

  • p2POT-PTFE BEARING (TYP.)
  • p2RCC SEISMIC STOPPER
  • p2STONE PITCHING
  • p2INDEPENDENT RETAINING WALL
  • p2600 THK. FILTER MEDIA
  • p21200 DIA BORED CAST-IN-SITU PILES
  • p2300 THK. APPROACH SLAB
  • p2150 THK. PCC LEVELING COURSE
  • p2RCC CRASH BARRIER
  • p2LAUNCHING APRON
  • p2RCC COLUMN PIER (TYP.)
  • p2DECK CONTINUITY
  • p2PRECAST PSC GIRDER (TYP.)
  • p2WALL TYPE ABUTMENT
  • p21200φ RCC CAST IN SITU PILE (TYP.)
  • p21. ALL DIMENSIONS ARE IN MILL... OTHERWISE SPECIFIED.
  • p22. DIMENSIONS ARE NOT TO BE ... FOLLOWED.
  • p23. THIS DRAWING SHALL BE RE... ALIGNMENT DRAWINGS.
  • p24. THE BRIDGE HAS BEEN DES... CLASS 70R + TWO LANE OF 70R OR SV LOADING WHICH...
  • p25. GRADE OF CONCRETE FOR VA... FOLLOWS:-
  • p2• PSC PRECAST GIRDER -
  • p2• R.C.C. CAST IN SITU DEC...
  • p2• R.C.C. END CROSS GIRDER -
  • p2• R.C.C. INTERMEDIATE CROS...
  • p2• BEARING PEDESTAL -
  • p21. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN METERS UNLESS OTHERWISE SPECIFIED.
  • p22. DIMENSIONS ARE NOT TO BE SCALED. ONLY WRITTEN DIMENSIONS SHALL BE FOLLOWED.
  • p23. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RESPECTIVE HIGHWAY ALIGNMENT DRAWINGS.
  • p24. THE BRIDGE HAS BEEN DESIGNED FOR FOUR LANE OF CLASS A, ONE LANE CLASS 70R + TWO LANE OF CLASS A, ONE LANE OF 70R + ONE LANE OF 70R OR SV LOADING WHICHEVER GOVERNS, IS CONSIDERED AS LIVE LOAD.
  • p25. GRADE OF CONCRETE FOR VARIOUS STRUCTURAL COMPONENTS SHALL BE AS FOLLOWS:-
  • p2PSC PRECAST GIRDER -----------M50
  • p2R.C.C. CAST IN SITU DECK SLAB ----M45
  • p2R.C.C. END CROSS GIRDER ----- --M45
  • p2R.C.C. INTERMEDIATE CROSS GIRDER --M45
  • p2BEARING PEDESTAL --------------M50
  • p2CRASH BARRIER ----------------M40
  • p2APPROACH SLAB ----------------M30
  • p2LEVELLING COURSE -------------M15
  • p2DIRT WALL & SLAB -------------M35
  • p2ABUTMENT & PIER --------------M45

Every crop it was read in — the drawing beside what the model took off it

Page 2

crop

p02_r05

page 2 · abutment_and_retaining_wall_p02_r05
Original
p02_r05
{
  "view": "Section",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A2",
      "shape": "rectangular stem and footing",
      "material": "",
      "count": 1,
      "note": "Shown supporting the bridge end at the expansion joint."
    },
    {
      "name": "Bridge deck slab",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bridge girder",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Only a partial girder/end portion is visible at left."
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear joint",
      "material": "",
      "count": 1,
      "note": "At bridge centreline/end of deck."
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "PTFE",
      "count": 1,
      "note": "Called out as POT-PTFE BEARING (TYP.)."
    },
    {
      "name": "Seismic stopper",
      "tag": "",
      "shape": "rectangular",
      "material": "RCC",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Dashed outline beneath the abutment."
    },
    {
      "name": "Bored cast-in-situ pile",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": "Pile positions are shown below the pile cap."
    },
    {
      "name": "Independent retaining wall",
      "tag": "",
      "shape": "vertical rectangular wall",
      "material": "",
      "count": 1,
      "note": "Located to the right of the abutment."
    },
    {
      "name": "Stone pitching",
      "tag": "",
      "shape": "irregular pitched surface",
      "material": "stone",
      "count": 1,
      "note": "Shown at the retaining-wall side."
    },
    {
      "name": "Filter media",
      "tag": "",
      "shape": "irregular zone",
      "material": "",
      "count": 1,
      "note": "Behind/below the stone pitching."
    },
    {
      "name": "Embankment",
      "tag": "",
      "shape": "sloping",
      "material": "",
      "count": 1,
      "note": "Slope marked 1 vertical to 2 horizontal."
    }
  ],
  "measurements": [
    {
      "label": "offset to C OF BRG.",
      "value": "1070 (SQ.)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "offset to C OF BRG.",
      "value": "1236 (SK.)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "EXP.GAP",
      "value": "80(SQ.)",
      "unit": "",
      "appliesTo": "Expansion joint"
    },
    {
      "label": "EXP.GAP",
      "value": "92(SK)",
      "unit": "",
      "appliesTo": "Expansion joint"
    },
    {
      "label": "deck/slab vertical dimension",
      "value": "230",
      "unit": "",
      "appliesTo": "Bridge deck slab"
    },
    {
      "label": "vertical dimension",
      "value": "2650",
      "unit": "",
      "appliesTo": "Bridge girder"
    },
    {
      "label": "horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "Bridge girder"
    },
    {
      "label": "horizontal dimension",
      "value": "2850",
      "unit": "",
      "appliesTo": "Bridge girder"
    },
    {
      "label": "horizontal dimension",
      "value": "3500(SQ)",
      "unit": "",
      "appliesTo": "Bridge deck slab"
    },
    {
      "label": "horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "Abutment"
    },
    {
      "label": "pile spacing/end offset",
      "value": "750",
      "unit": "",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "pile spacing/end offset",
      "value": "750",
      "unit": "",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "pile cap length",
      "value": "12300",
      "unit": "",
      "appliesTo": "Pile cap"
    },
    {
      "label": "embankment slope",
      "value": "1:2",
      "unit": "",
      "appliesTo": "Embankment"
    },
    {
      "label": "filter media thickness",
      "value": "600",
      "unit": "THK.",
      "appliesTo": "Filter media"
    },
    {
      "label": "pile diameter",
      "value": "1200",
      "unit": "DIA",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "SECTION A-A"
    }
  ],
  "notes": [
    "POT-PTFE BEARING (TYP.)",
    "RCC SEISMIC STOPPER",
    "STONE PITCHING",
    "INDEPENDENT RETAINING WALL",
    "600 THK. FILTER MEDIA",
    "1200 DIA BORED CAST-IN-SITU PILES"
  ],
  "labels": [
    "A2",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "SECTION A-A",
    "(SCALE 1:150)"
  ],
  "description": "This crop shows SECTION A-A through abutment A2 at the bridge expansion-joint end. It documents the deck end, bearing and RCC seismic stopper, abutment and piled foundation, together with the adjacent sloping embankment and independent retaining wall treatment."
}

p02_r05Section

  • Bearing×1rectangularPTFECalled out as POT-PTFE BEARING (TYP.).

1070 (SQ.) offset to C OF BRG.1236 (SK.) offset to C OF BRG.80(SQ.) EXP.GAP92(SK) EXP.GAP230 deck/slab vertical dimension2650 vertical dimension1500 horizontal dimension2850 horizontal dimension+12 more

crop

p02_r01

page 2 · bridge_superstructure_p02_r01
Original
p02_r01
{
  "view": "Elevation",
  "objects": [
    {
      "name": "Wall type abutment",
      "tag": "A1",
      "shape": "rectangular wall",
      "material": "",
      "count": 1,
      "note": "Left abutment shown."
    },
    {
      "name": "Wall type abutment",
      "tag": "A2",
      "shape": "rectangular wall",
      "material": "",
      "count": 1,
      "note": "Right abutment shown."
    },
    {
      "name": "RCC column pier",
      "tag": "P1",
      "shape": "rectangular column",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Marked “(TYP.)”."
    },
    {
      "name": "Precast PSC girder",
      "tag": "",
      "shape": "rectangular elevation profile",
      "material": "precast PSC",
      "count": 6,
      "note": "Marked “(TYP.)”; three girders are visible in each span."
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "continuous linear barrier",
      "material": "reinforced concrete",
      "count": null,
      "note": "Shown along the deck."
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "FR",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "Marked “(TYP.)” at abutment locations."
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "FX",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown at the pier."
    },
    {
      "name": "Deck continuity",
      "tag": "",
      "shape": "rectangular joint/diaphragm",
      "material": "",
      "count": 1,
      "note": "Shown over pier P1."
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": 2,
      "note": "One at each end of bridge."
    },
    {
      "name": "PCC levelling course",
      "tag": "",
      "shape": "horizontal layer",
      "material": "PCC",
      "count": 2,
      "note": "Below approach slabs."
    },
    {
      "name": "Launching apron",
      "tag": "",
      "shape": "sloping and horizontal apron",
      "material": "",
      "count": 2,
      "note": "One adjacent to each abutment."
    },
    {
      "name": "Stone pitching",
      "tag": "",
      "shape": "sloping protection layer",
      "material": "stone",
      "count": 2,
      "note": "At both abutments."
    },
    {
      "name": "Independent retaining wall",
      "tag": "",
      "shape": "vertical wall",
      "material": "",
      "count": 2,
      "note": "One behind each abutment."
    },
    {
      "name": "Filter media",
      "tag": "",
      "shape": "layer",
      "material": "",
      "count": 2,
      "note": "Marked 600 THK."
    },
    {
      "name": "Pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "One under each abutment and one under pier P1."
    },
    {
      "name": "RCC cast in situ pile",
      "tag": "",
      "shape": "circular pile",
      "material": "reinforced concrete",
      "count": 8,
      "note": "Marked “(TYP.)”; three visible below each abutment cap and two below pier cap."
    }
  ],
  "measurements": [
    {
      "label": "Expansion gap",
      "value": "80(SQ.) 92(SK)",
      "unit": "mm",
      "appliesTo": "A1"
    },
    {
      "label": "Expansion gap",
      "value": "80(SQ.) 92(SK)",
      "unit": "mm",
      "appliesTo": "A2"
    },
    {
      "label": "Horizontal dimension",
      "value": "40000(SQ) 46188(SK)",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "Horizontal dimension",
      "value": "46000(SK) 46188(SK)",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "Horizontal dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "Horizontal dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "Distance from C OF BRG.",
      "value": "1070(SQ) 1236(SK)",
      "unit": "mm",
      "appliesTo": "A1"
    },
    {
      "label": "Distance from C OF BRG.",
      "value": "1070(SQ) 1236(SK)",
      "unit": "mm",
      "appliesTo": "A2"
    },
    {
      "label": "Distance at pier",
      "value": "1170(SQ) 1350(SK)",
      "unit": "mm",
      "appliesTo": "P1"
    },
    {
      "label": "Distance at pier",
      "value": "1170(SQ) 1350(SK)",
      "unit": "mm",
      "appliesTo": "P1"
    },
    {
      "label": "Approach slab thickness",
      "value": "300",
      "unit": "mm",
      "appliesTo": "A1, A2"
    },
    {
      "label": "PCC levelling course thickness",
      "value": "150",
      "unit": "mm",
      "appliesTo": "A1, A2"
    },
    {
      "label": "Minimum vertical distance to HFL",
      "value": "1200 (min.)",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "LWL",
      "value": "506.000m",
      "unit": "m",
      "appliesTo": ""
    },
    {
      "label": "Filter media thickness",
      "value": "600",
      "unit": "mm",
      "appliesTo": "Filter media"
    },
    {
      "label": "Abutment pile-cap end projection",
      "value": "750",
      "unit": "mm",
      "appliesTo": "Pile cap"
    },
    {
      "label": "Abutment pile spacing",
      "value": "3600",
      "unit": "mm",
      "appliesTo": "Pile cap"
    },
    {
      "label": "Abutment pile-cap overall width",
      "value": "12300",
      "unit": "mm",
      "appliesTo": "Pile cap"
    },
    {
      "label": "Pier pile-cap end projection",
      "value": "750",
      "unit": "mm",
      "appliesTo": "P1"
    },
    {
      "label": "Pier pile spacing",
      "value": "3600",
      "unit": "mm",
      "appliesTo": "P1"
    },
    {
      "label": "Pier pile-cap overall width",
      "value": "5100",
      "unit": "mm",
      "appliesTo": "P1"
    },
    {
      "label": "Cast in situ pile diameter",
      "value": "1200φ",
      "unit": "mm",
      "appliesTo": "RCC cast in situ pile"
    },
    {
      "label": "Chainage LHS",
      "value": "64+360.197",
      "unit": "km.",
      "appliesTo": "A1"
    },
    {
      "label": "Chainage RHS",
      "value": "64+371.487",
      "unit": "km.",
      "appliesTo": "A1"
    },
    {
      "label": "FRL LHS",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "FRL RHS",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "Ground level LHS",
      "value": "509.560",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "Ground level RHS",
      "value": "509.155",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "Chainage LHS",
      "value": "64+406.385",
      "unit": "km.",
      "appliesTo": "P1"
    },
    {
      "label": "Chainage RHS",
      "value": "64+417.675",
      "unit": "km.",
      "appliesTo": "P1"
    },
    {
      "label": "FRL LHS",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "FRL RHS",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "Ground level LHS",
      "value": "503.816",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "Ground level RHS",
      "value": "503.883",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "Chainage LHS",
      "value": "64+452.573",
      "unit": "km.",
      "appliesTo": "A2"
    },
    {
      "label": "Chainage RHS",
      "value": "64+463.814",
      "unit": "km.",
      "appliesTo": "A2"
    },
    {
      "label": "FRL LHS",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "FRL RHS",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "Ground level LHS",
      "value": "511.891",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "Ground level RHS",
      "value": "512.668",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "Drawing scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "Elevation"
    }
  ],
  "notes": [
    "300 THK. APPROACH SLAB",
    "150 THK. PCC LEVELING COURSE",
    "RCC CRASH BARRIER",
    "POT-PTFE BEARING (TYP.)",
    "LAUNCHING APRON",
    "STONE PITCHING",
    "INDEPENDENT RETAINING WALL",
    "600 THK. FILTER MEDIA",
    "RCC COLUMN PIER (TYP.)",
    "DECK CONTINUITY",
    "PRECAST PSC GIRDER (TYP.)",
    "WALL TYPE ABUTMENT",
    "1200φ RCC CAST IN SITU PILE (TYP.)",
    "1. ALL DIMENSIONS ARE IN MILL... OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT TO BE ... FOLLOWED.",
    "3. THIS DRAWING SHALL BE RE... ALIGNMENT DRAWINGS.",
    "4. THE BRIDGE HAS BEEN DES... CLASS 70R + TWO LANE OF 70R OR SV LOADING WHICH...",
    "5. GRADE OF CONCRETE FOR VA... FOLLOWS:-",
    "• PSC PRECAST GIRDER -",
    "• R.C.C. CAST IN SITU DEC...",
    "• R.C.C. END CROSS GIRDER -",
    "• R.C.C. INTERMEDIATE CROS...",
    "• BEARING PEDESTAL -"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "HFL=",
    "LWL=506.000m",
    "CHAINAGE IN (km.)",
    "LHS",
    "RHS",
    "FRL. (m)",
    "MAIN CARRIAGEWAY",
    "GROUND LEVEL (m)",
    "ELEVATION",
    "(SCALE 1:300)",
    "NOTES:"
  ],
  "description": "This crop is an elevation of a bridge superstructure and its supporting substructure, extending between abutments A1 and A2 with pier P1 at the centre. It shows PSC girders, bearings, deck barriers, approach arrangements, abutment and pier foundations, retaining walls, stone pitching, and an elevation/chainage table."
}

p02_r01Elevation

  • POT-PTFE bearingFR×3rectangularMarked “(TYP.)” at abutment locations.
  • POT-PTFE bearingFX×1rectangularShown at the pier.

80(SQ.) 92(SK) mm Expansion gap80(SQ.) 92(SK) mm Expansion gap40000(SQ) 46188(SK) mm Horizontal dimension46000(SK) 46188(SK) mm Horizontal dimension37761(SQ) 43602(SK) mm Horizontal dimension37761(SQ) 43602(SK) mm Horizontal dimension1070(SQ) 1236(SK) mm Distance from C OF BRG.1070(SQ) 1236(SK) mm Distance from C OF BRG.+33 more

crop

p02_r03

page 2 · general_notes_p02_r03
Original
p02_r03
{
  "view": "Notes",
  "objects": [
    {
      "name": "PSC precast girder",
      "tag": "",
      "shape": "",
      "material": "precast concrete",
      "count": null,
      "note": "Concrete grade specified as M50."
    },
    {
      "name": "R.C.C. cast in situ deck slab",
      "tag": "",
      "shape": "slab",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "R.C.C. end cross girder",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "R.C.C. intermediate cross girder",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "bearing pedestal",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M50."
    },
    {
      "name": "crash barrier",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M40."
    },
    {
      "name": "approach slab",
      "tag": "",
      "shape": "slab",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M30."
    },
    {
      "name": "levelling course",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M15."
    },
    {
      "name": "dirt wall & slab",
      "tag": "",
      "shape": "slab",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M35."
    },
    {
      "name": "abutment & pier",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M45."
    },
    {
      "name": "pile foundation",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade specified as M35."
    },
    {
      "name": "reinforcing steel",
      "tag": "",
      "shape": "bar",
      "material": "high yield strength deformed (TMT) steel",
      "count": null,
      "note": "Grade-Fe 550D, conforming to IS: 1786."
    },
    {
      "name": "strip seal type expansion joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "To be provided as per MORTH specification."
    },
    {
      "name": "bituminous concrete",
      "tag": "",
      "shape": "layer",
      "material": "bituminous concrete",
      "count": null,
      "note": "Laid in single layer."
    },
    {
      "name": "drainage spout",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "To be provided in deck slab."
    },
    {
      "name": "selected earth fill",
      "tag": "",
      "shape": "",
      "material": "earth fill",
      "count": null,
      "note": "Used for backfilling behind RE wall."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Bearing height may be adjusted in pedestal."
    },
    {
      "name": "piercap",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Top level fixed considering bearing and pedestal depth."
    },
    {
      "name": "working pile",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Tentative working load is subject to change as per detailed design."
    }
  ],
  "measurements": [
    {
      "label": "Concrete grade, PSC PRECAST GIRDER",
      "value": "M50",
      "unit": "",
      "appliesTo": "PSC precast girder"
    },
    {
      "label": "Concrete grade, R.C.C. CAST IN SITU DECK SLAB",
      "value": "M45",
      "unit": "",
      "appliesTo": "R.C.C. cast in situ deck slab"
    },
    {
      "label": "Concrete grade, R.C.C. END CROSS GIRDER",
      "value": "M45",
      "unit": "",
      "appliesTo": "R.C.C. end cross girder"
    },
    {
      "label": "Concrete grade, R.C.C. INTERMEDIATE CROSS GIRDER",
      "value": "M45",
      "unit": "",
      "appliesTo": "R.C.C. intermediate cross girder"
    },
    {
      "label": "Concrete grade, BEARING PEDESTAL",
      "value": "M50",
      "unit": "",
      "appliesTo": "bearing pedestal"
    },
    {
      "label": "Concrete grade, CRASH BARRIER",
      "value": "M40",
      "unit": "",
      "appliesTo": "crash barrier"
    },
    {
      "label": "Concrete grade, APPROACH SLAB",
      "value": "M30",
      "unit": "",
      "appliesTo": "approach slab"
    },
    {
      "label": "Concrete grade, LEVELLING COURSE",
      "value": "M15",
      "unit": "",
      "appliesTo": "levelling course"
    },
    {
      "label": "Concrete grade, DIRT WALL & SLAB",
      "value": "M35",
      "unit": "",
      "appliesTo": "dirt wall & slab"
    },
    {
      "label": "Concrete grade, ABUTMENT & PIER",
      "value": "M45",
      "unit": "",
      "appliesTo": "abutment & pier"
    },
    {
      "label": "Concrete grade, PILE FOUNDATION",
      "value": "M35",
      "unit": "",
      "appliesTo": "pile foundation"
    },
    {
      "label": "Clear cover, FOUNDATION",
      "value": "75",
      "unit": "mm",
      "appliesTo": "foundation"
    },
    {
      "label": "Clear cover, ABUTMENT & ABUTMENT CAP",
      "value": "45",
      "unit": "mm",
      "appliesTo": "abutment & abutment cap"
    },
    {
      "label": "Clear cover, PIER & PIER CAP",
      "value": "45",
      "unit": "mm",
      "appliesTo": "pier & pier cap"
    },
    {
      "label": "Clear cover, SUPERSTRUCTURE",
      "value": "45",
      "unit": "mm",
      "appliesTo": "superstructure"
    },
    {
      "label": "Reinforcing steel grade",
      "value": "Fe 550D",
      "unit": "",
      "appliesTo": "reinforcing steel"
    },
    {
      "label": "Bituminous concrete thickness",
      "value": "50",
      "unit": "MM",
      "appliesTo": "bituminous concrete"
    },
    {
      "label": "Earth fill cohesion",
      "value": "C=0",
      "unit": "",
      "appliesTo": "selected earth fill"
    },
    {
      "label": "Earth fill friction angle",
      "value": "ø>32°",
      "unit": "",
      "appliesTo": "selected earth fill"
    },
    {
      "label": "Earth fill unit weight",
      "value": "γ=2T/m³",
      "unit": "",
      "appliesTo": "selected earth fill"
    },
    {
      "label": "Bearing and pedestal depth",
      "value": "400",
      "unit": "mm",
      "appliesTo": "piercap"
    },
    {
      "label": "Bearing height threshold",
      "value": "200",
      "unit": "mm",
      "appliesTo": "bearing"
    },
    {
      "label": "Pedestal adjustment height",
      "value": "200",
      "unit": "mm",
      "appliesTo": "pedestal"
    },
    {
      "label": "Maximum vertical working pile load",
      "value": "300",
      "unit": "T",
      "appliesTo": "working pile"
    },
    {
      "label": "Lateral working pile load",
      "value": "50",
      "unit": "T",
      "appliesTo": "working pile"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN METERS UNLESS OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT TO BE SCALED. ONLY WRITTEN DIMENSIONS SHALL BE FOLLOWED.",
    "3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RESPECTIVE HIGHWAY ALIGNMENT DRAWINGS.",
    "4. THE BRIDGE HAS BEEN DESIGNED FOR FOUR LANE OF CLASS A, ONE LANE CLASS 70R + TWO LANE OF CLASS A, ONE LANE OF 70R + ONE LANE OF 70R OR SV LOADING WHICHEVER GOVERNS, IS CONSIDERED AS LIVE LOAD.",
    "5. GRADE OF CONCRETE FOR VARIOUS STRUCTURAL COMPONENTS SHALL BE AS FOLLOWS:-",
    "PSC PRECAST GIRDER -----------M50",
    "R.C.C. CAST IN SITU DECK SLAB ----M45",
    "R.C.C. END CROSS GIRDER ----- --M45",
    "R.C.C. INTERMEDIATE CROSS GIRDER --M45",
    "BEARING PEDESTAL --------------M50",
    "CRASH BARRIER ----------------M40",
    "APPROACH SLAB ----------------M30",
    "LEVELLING COURSE -------------M15",
    "DIRT WALL & SLAB -------------M35",
    "ABUTMENT & PIER --------------M45",
    "PILE FOUNDATION --------------M35",
    "6. CLEAR COVER TO ANY REINFORCEMENTS SHALL BE AS FOLLOWS:",
    "FOUNDATION........................................75mm",
    "SUBSTRUCTURE ABUTMENT & ABUTMENT CAP......45mm",
    "PIER & PIER CAP........................45mm",
    "SUPERSTRUCTURE......................................45mm",
    "7. ALL REINFORCING STEEL SHOULD BE HIGH YIELD STRENGTH DEFORMED (TMT) BARS OF GRADE-Fe 550D, CONFORMING TO IS: 1786.",
    "8. STRIP SEAL TYPE OF EXPANSION JOINT SHALL BE PROVIDED AS PER M O R T H SPECIFICATION.",
    "9. BITUMINOUS CONCRETE 50MM THICK LAID IN SINGLE LAYER.",
    "10. FRI, CAMBER / SUPER ELEVATION & LAYOUT SHALL BE FOLLOWED AS PER LATEST PLAN & PROFILE DRAWING.",
    "11. DRAINAGE SPOUT SHALL BE PROVIDED IN DECK SLAB AS PER M O R T H SPECIFICATION.",
    "12. BACK FILLING MATERIAL BEHIND ABUTMENT SHALL BE WELL COMPACTED AS PER APPENDIX 6 OF IRC 78:2014 & M O R T H SPECIFICATION BEFORE RESTING THE SUPERSTRUCTURE.",
    "13. THE STRUCTURE IS LOCATED IN SEISMIC ZONE III AND WIND ZONE IV & ‘SEVERE’ EXPOSURE CONDITION.",
    "14. DIMENSION OF STRUCTURES ARE TENTATIVE AND WILL BE FINALIZED AFTER DETAIL DESIGN.",
    "15. THE SELECTED EARTH FILL USED FOR BACKFILLING BEHIND RE WALL SHALL HAVE THE FOLLOWING PROPERTIES. C=0, ø>32°,γ=2T/m³",
    "16. THE PIERCAP TOP LEVEL HAS BEEN FIXED CONSIDERING 400mm DEPTH OF BRG. & PEDESTAL. IN CASE THE BEARING HEIGHT IS LESS THAN THAT OF 200mm THEN THE HEIGHT OF THE BEARING SHALL BE ADJUSTED IN 200mm PEDESTAL.",
    "17. FOR DIMENSION & REINFORCEMENT DETAILS OF APPROACH SLAB, GAP SLAB, CRASH BARRIER & DRAINAGE SPOUTS REFER MISCELLANEOUS DRG.",
    "18. TENTATIVE WORKING PILE LOAD AND SUBJECTED TO CHANGE AS PER DETAILED DESIGN:-"
  ],
  "labels": [
    "NOTES:",
    "MAX. VERTICAL LOAD",
    "LATERAL LOAD"
  ],
  "description": "This crop is a general structural bridge notes block, including concrete grades, reinforcement cover requirements, material requirements, design criteria, and construction references. It also includes a small table of tentative working pile loads; no plan, elevation, or physical arrangement of the bridge is shown."
}

p02_r03Notes

  • bearingBearing height may be adjusted in pedestal.

M50 Concrete grade, PSC PRECAST GIRDERM45 Concrete grade, R.C.C. CAST IN SITU DECK SLABM45 Concrete grade, R.C.C. END CROSS GIRDERM45 Concrete grade, R.C.C. INTERMEDIATE CROSS GIRDERM50 Concrete grade, BEARING PEDESTALM40 Concrete grade, CRASH BARRIERM30 Concrete grade, APPROACH SLABM15 Concrete grade, LEVELLING COURSE+17 more

crop

pier_p1

page 2 · pier_p1
Original
pier_p1
{
  "view": "Section",
  "objects": [
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": null,
      "note": "Marked FRL."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Deck continuity is indicated over the pier."
    },
    {
      "name": "precast PSC girder",
      "tag": "",
      "shape": "girder",
      "material": "precast prestressed concrete",
      "count": 2,
      "note": "Marked (TYP.)."
    },
    {
      "name": "RCC seismic stopper",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Marked (TYP.)."
    },
    {
      "name": "RCC column pier",
      "tag": "P1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "RCC pilecap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "bored cast-in-situ pile",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "Shown below pilecap; callout states 1200 DIA."
    }
  ],
  "measurements": [
    {
      "label": "horizontal dimension from C OF BRG.",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "horizontal dimension from C OF BRG.",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "horizontal dimension from C OF BRG.",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "horizontal dimension from C OF BRG.",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "vertical dimension at crash barrier/deck",
      "value": "230",
      "unit": "",
      "appliesTo": "RCC crash barrier"
    },
    {
      "label": "vertical dimension at crash barrier/deck",
      "value": "230",
      "unit": "",
      "appliesTo": "RCC crash barrier"
    },
    {
      "label": "vertical girder depth dimension",
      "value": "2650",
      "unit": "",
      "appliesTo": "precast PSC girder"
    },
    {
      "label": "vertical girder depth dimension",
      "value": "2650",
      "unit": "",
      "appliesTo": "precast PSC girder"
    },
    {
      "label": "bearing/seismic stopper horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "POT-PTFE bearing"
    },
    {
      "label": "pier head vertical dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "pier head subdivision dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "pier head subdivision dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "pier head width dimension",
      "value": "3640(SQ)",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "pier head width dimension",
      "value": "4203(SK)",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "column width",
      "value": "1500",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "pilecap vertical dimension",
      "value": "1800",
      "unit": "",
      "appliesTo": "RCC pilecap"
    },
    {
      "label": "pilecap end horizontal dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "RCC pilecap"
    },
    {
      "label": "pile spacing dimension",
      "value": "3600",
      "unit": "",
      "appliesTo": "bored cast-in-situ pile"
    },
    {
      "label": "pilecap end horizontal dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "RCC pilecap"
    },
    {
      "label": "pilecap overall width",
      "value": "5100",
      "unit": "",
      "appliesTo": "RCC pilecap"
    },
    {
      "label": "bored pile diameter",
      "value": "1200",
      "unit": "DIA",
      "appliesTo": "bored cast-in-situ pile"
    },
    {
      "label": "section-at-pier rectangle horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "section-at-pier rectangle vertical dimension",
      "value": "1000",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "chamfer dimension",
      "value": "25",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "chamfer dimension",
      "value": "25",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "chamfer size",
      "value": "25X25",
      "unit": "",
      "appliesTo": "RCC column pier"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER FRL",
    "DECK CONTINUITY",
    "PRECAST PSC GIRDER (TYP.)",
    "RCC SEISMIC STOPPER",
    "POT-PTFE BEARING (TYP.)",
    "RCC COLUMN PIER",
    "RCC PILECAP",
    "1200 DIA BORED CAST-IN-SITU PILES",
    "CHAMFER 25X25"
  ],
  "labels": [
    "P1",
    "C OF BRG.",
    "C OF BRG.",
    "SECTION B-B",
    "(SCALE 1:150)",
    "SECTION AT PIER LOCATION",
    "(SCALE 1:25)"
  ],
  "description": "This crop shows Section B-B through pier P1, including the deck support arrangement, RCC column pier, pilecap, and two bored cast-in-situ piles. A separate section titled SECTION AT PIER LOCATION shows a 1500 by 1000 rectangular pier section with 25X25 chamfers."
}

pier_p1Section

  • POT-PTFE bearing×2rectangularMarked (TYP.).

1170(SQ) horizontal dimension from C OF BRG.1350(SK) horizontal dimension from C OF BRG.1170(SQ) horizontal dimension from C OF BRG.1350(SK) horizontal dimension from C OF BRG.230 vertical dimension at crash barrier/deck230 vertical dimension at crash barrier/deck2650 vertical girder depth dimension2650 vertical girder depth dimension+18 more

crop

p02_r01 elevation of bridge superstructure

page 2 · structural_drawings_pkg_1_7a22288d85c64bc6bd8c641faee2f453_p02_r01_elevation_of_bridge_superstructure
Original
p02_r01 elevation of bridge superstructure
{
  "view": "Elevation",
  "objects": [
    {
      "name": "wall type abutment",
      "tag": "A1",
      "shape": "rectangular with sloping wingwall/return wall",
      "material": "",
      "count": 1,
      "note": "Left abutment."
    },
    {
      "name": "wall type abutment",
      "tag": "A2",
      "shape": "rectangular with sloping wingwall/return wall",
      "material": "",
      "count": 1,
      "note": "Right abutment."
    },
    {
      "name": "RCC column pier",
      "tag": "P1",
      "shape": "rectangular column",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Marked RCC COLUMN PIER (TYP.)."
    },
    {
      "name": "precast PSC girder",
      "tag": "",
      "shape": "girder",
      "material": "precast prestressed concrete",
      "count": null,
      "note": "Marked PRECAST PSC GIRDER (TYP.)."
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 4,
      "note": "Marked POT-PTFE BEARING (TYP.)."
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear barrier",
      "material": "reinforced concrete",
      "count": 2,
      "note": ""
    },
    {
      "name": "deck continuity",
      "tag": "",
      "shape": "linear deck connection",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "expansion joint",
      "tag": "",
      "shape": "linear joint",
      "material": "",
      "count": 2,
      "note": "Located at the two abutment ends."
    },
    {
      "name": "approach slab",
      "tag": "",
      "shape": "sloping slab",
      "material": "",
      "count": 2,
      "note": "Marked 300 THK. APPROACH SLAB."
    },
    {
      "name": "PCC levelling course",
      "tag": "",
      "shape": "horizontal layer",
      "material": "plain cement concrete",
      "count": 2,
      "note": "Marked 150 THK. PCC LEVELLING COURSE."
    },
    {
      "name": "independent retaining wall",
      "tag": "",
      "shape": "sloping wall",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "stone pitching",
      "tag": "",
      "shape": "sloping surface protection",
      "material": "stone",
      "count": 2,
      "note": "Associated with 600 THK. FILTER MEDIA."
    },
    {
      "name": "filter media",
      "tag": "",
      "shape": "layer",
      "material": "",
      "count": 2,
      "note": "Marked 600 THK. FILTER MEDIA."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "Two abutment pile caps and one pier pile cap are visible."
    },
    {
      "name": "RCC cast in situ pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 10,
      "note": "Marked 1200ø RCC CAST IN SITU PILE (TYP.)."
    }
  ],
  "measurements": [
    {
      "label": "span dimension",
      "value": "40000(SQ) 46188(SK)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "span dimension",
      "value": "46000(SK) 46188(SK)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "bridge dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "bridge dimension",
      "value": "37761(SQ) 43602(SK)",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "EXP.GAP",
      "value": "80(SQ.) 92(SK)",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "EXP.GAP",
      "value": "80(SQ.) 92(SK)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "dimension",
      "value": "1070(SQ) 1236(SK)",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "dimension",
      "value": "1170(SQ) 1350(SK)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "dimension",
      "value": "1170(SQ) 1350(SK)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "dimension",
      "value": "1070(SQ) 1236(SK)",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "approach slab thickness",
      "value": "300",
      "unit": "THK.",
      "appliesTo": "approach slab"
    },
    {
      "label": "PCC levelling course thickness",
      "value": "150",
      "unit": "THK.",
      "appliesTo": "PCC levelling course"
    },
    {
      "label": "filter media thickness",
      "value": "600",
      "unit": "THK.",
      "appliesTo": "filter media"
    },
    {
      "label": "HFL",
      "value": "1200",
      "unit": "mm",
      "appliesTo": ""
    },
    {
      "label": "LWL",
      "value": "506.000",
      "unit": "m",
      "appliesTo": ""
    },
    {
      "label": "pile diameter",
      "value": "1200ø",
      "unit": "",
      "appliesTo": "RCC cast in situ pile"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile cap overall dimension",
      "value": "12300",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pile cap overall dimension",
      "value": "5100",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "pile cap overall dimension",
      "value": "12300",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "pile cap end dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "chainage LHS",
      "value": "64+360.197",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "chainage RHS",
      "value": "64+371.487",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "FRL main carriageway LHS",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "FRL main carriageway RHS",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "ground level main carriageway LHS",
      "value": "509.560",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "ground level main carriageway RHS",
      "value": "509.155",
      "unit": "m",
      "appliesTo": "A1"
    },
    {
      "label": "chainage",
      "value": "64+406.385",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "chainage",
      "value": "64+417.675",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "FRL main carriageway",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "FRL main carriageway",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "ground level main carriageway",
      "value": "503.816",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "ground level main carriageway",
      "value": "503.883",
      "unit": "m",
      "appliesTo": "P1"
    },
    {
      "label": "chainage LHS",
      "value": "64+452.573",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "chainage RHS",
      "value": "64+463.814",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "FRL main carriageway LHS",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "FRL main carriageway RHS",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "ground level main carriageway LHS",
      "value": "511.891",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "ground level main carriageway RHS",
      "value": "512.668",
      "unit": "m",
      "appliesTo": "A2"
    },
    {
      "label": "drawing scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "ELEVATION"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS ARE IN M",
    "OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT TO BE FOLLOWED.",
    "3. THIS DRAWING SHALL BE RE",
    "ALIGNMENT DRAWINGS.",
    "4. THE BRIDGE HAS BEEN DES",
    "CLASS 70R + TWO LANE O",
    "70R OR SV LOADING WHICH",
    "5. GRADE OF CONCRETE FOR",
    "FOLLOWS:-",
    "• PSC PRECAST GIRDER",
    "• R.C.C. CAST IN SITU DE",
    "• R.C.C. END CROSS GIRDER",
    "• R.C.C. INTERMEDIATE C",
    "• REINFORCEMENT"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "FR",
    "ELEVATION",
    "(SCALE 1:300)",
    "CHAINAGE IN (km.)",
    "LHS",
    "RHS",
    "FRL. (m) MAIN CARRIAGEWAY",
    "GROUND LEVEL (m) MAIN CARRIAGEWAY",
    "NOTES:"
  ],
  "description": "This crop shows an elevation of a two-span bridge between abutments A1 and A2, with central RCC column pier P1. It documents the superstructure, bearings, approach slabs, abutment and retaining-wall protection, pile foundations, water levels, and chainage/elevation data."
}

p02_r01 elevation of bridge superstructureElevation

  • POT-PTFE bearing×4rectangularMarked POT-PTFE BEARING (TYP.).

40000(SQ) 46188(SK) span dimension46000(SK) 46188(SK) span dimension37761(SQ) 43602(SK) bridge dimension37761(SQ) 43602(SK) bridge dimension80(SQ.) 92(SK) EXP.GAP80(SQ.) 92(SK) EXP.GAP1070(SQ) 1236(SK) dimension1170(SQ) 1350(SK) dimension+43 more

crop

p02_r04 section b b

page 2 · structural_drawings_pkg_1_7a22288d85c64bc6bd8c641faee2f453_p02_r04_section_b_b
Original
p02_r04 section b b
{
  "view": "Section",
  "objects": [
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown at both deck edges."
    },
    {
      "name": "deck slab / deck continuity",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Callout identifies DECK CONTINUITY at the pier."
    },
    {
      "name": "precast PSC girder",
      "tag": "",
      "shape": "I-girder",
      "material": "precast prestressed concrete",
      "count": 2,
      "note": "Shown on either side of the pier; marked (TYP.)."
    },
    {
      "name": "RCC seismic stopper",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "PTFE",
      "count": 2,
      "note": "Marked (TYP.)."
    },
    {
      "name": "pier cap",
      "tag": "P1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "column pier",
      "tag": "P1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "pilecap",
      "tag": "P1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "bored cast-in-situ pile",
      "tag": "P1",
      "shape": "circular",
      "material": "cast-in-situ concrete",
      "count": 2,
      "note": "Pile shafts are shown below the pilecap."
    }
  ],
  "measurements": [
    {
      "label": "Offset from C OF BRG.",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Offset from C OF BRG.",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Offset from C OF BRG.",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Offset from C OF BRG.",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Crash barrier/deck vertical dimension",
      "value": "230",
      "unit": "",
      "appliesTo": "RCC crash barrier"
    },
    {
      "label": "Crash barrier/deck vertical dimension",
      "value": "230",
      "unit": "",
      "appliesTo": "RCC crash barrier"
    },
    {
      "label": "Girder depth vertical dimension",
      "value": "2650",
      "unit": "",
      "appliesTo": "Precast PSC girder"
    },
    {
      "label": "Girder depth vertical dimension",
      "value": "2650",
      "unit": "",
      "appliesTo": "Precast PSC girder"
    },
    {
      "label": "Seismic stopper width",
      "value": "1500",
      "unit": "",
      "appliesTo": "RCC seismic stopper"
    },
    {
      "label": "Pier-cap vertical dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Pier-cap vertical dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Pier-cap vertical dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Pier-cap width",
      "value": "3640(SQ)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Pier-cap width",
      "value": "4203(SK)",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Column pier width",
      "value": "1500",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Pilecap depth",
      "value": "1800",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Pile spacing/end offset",
      "value": "750",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Pile spacing/end offset",
      "value": "750",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Pilecap width",
      "value": "5100",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Bored pile diameter",
      "value": "1200",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Drawing scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "SECTION B-B"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "FRL",
    "DECK CONTINUITY",
    "PRECAST PSC GIRDER (TYP.)",
    "RCC SEISMIC STOPPER",
    "POT-PTFE BEARING (TYP.)",
    "RCC COLUMN PIER",
    "RCC PILECAP",
    "1200 DIA BORED CAST-IN-SITU PILES"
  ],
  "labels": [
    "P1",
    "C OF BRG.",
    "SECTION B-B",
    "(SCALE 1:150)"
  ],
  "description": "This crop is SECTION B-B through pier P1, showing the bridge deck, crash barriers, precast PSC girders, bearings, seismic stopper, pier cap, column pier, pilecap, and bored piles. The section documents the support arrangement and the printed transverse and vertical dimensions for the pier assembly."
}

p02_r04 section b bSection

  • POT-PTFE bearing×2rectangularPTFEMarked (TYP.).

1170(SQ) Offset from C OF BRG.1350(SK) Offset from C OF BRG.1170(SQ) Offset from C OF BRG.1350(SK) Offset from C OF BRG.230 Crash barrier/deck vertical dimension230 Crash barrier/deck vertical dimension2650 Girder depth vertical dimension2650 Girder depth vertical dimension+14 more

crop

p02_r05 section a a

page 2 · structural_drawings_pkg_1_7a22288d85c64bc6bd8c641faee2f453_p02_r05_section_a_a
Original
p02_r05 section a a
{
  "view": "Section",
  "objects": [
    {
      "name": "bridge deck slab",
      "tag": "",
      "shape": "rectangular horizontal slab",
      "material": "",
      "count": 1,
      "note": "Partial deck section is shown."
    },
    {
      "name": "expansion joint",
      "tag": "",
      "shape": "narrow vertical joint",
      "material": "",
      "count": 1,
      "note": "Located at C OF EXP. JOINT."
    },
    {
      "name": "abutment",
      "tag": "",
      "shape": "reinforced concrete wall with seat",
      "material": "",
      "count": 1,
      "note": "Supported on a pile cap."
    },
    {
      "name": "wingwall",
      "tag": "",
      "shape": "sloping retaining wall",
      "material": "",
      "count": 1,
      "note": "Extends from the abutment toward the left."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown below the abutment."
    },
    {
      "name": "bored cast-in-situ piles",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": "Pile locations are shown beneath the pile cap."
    },
    {
      "name": "POT-PTFE bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Marked TYP."
    },
    {
      "name": "RCC seismic stopper",
      "tag": "",
      "shape": "rectangular block",
      "material": "RCC",
      "count": 1,
      "note": ""
    },
    {
      "name": "independent retaining wall",
      "tag": "",
      "shape": "vertical wall",
      "material": "",
      "count": 1,
      "note": "Partially shown at the right side of the section."
    },
    {
      "name": "stone pitching",
      "tag": "",
      "shape": "sloping layer",
      "material": "stone",
      "count": 1,
      "note": ""
    },
    {
      "name": "filter media",
      "tag": "",
      "shape": "tapered layer",
      "material": "",
      "count": 1,
      "note": "Shown adjacent to the independent retaining wall."
    },
    {
      "name": "reinforcement bar",
      "tag": "1",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": "Bar mark is shown within the sloping wall."
    },
    {
      "name": "reinforcement bar",
      "tag": "2",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": "Bar mark is shown within the sloping wall."
    }
  ],
  "measurements": [
    {
      "label": "dimension (SQ.)",
      "value": "1070",
      "unit": "",
      "appliesTo": "C OF BRG."
    },
    {
      "label": "dimension (SK.)",
      "value": "1236",
      "unit": "",
      "appliesTo": "C OF BRG."
    },
    {
      "label": "EXP.GAP (SQ.)",
      "value": "80",
      "unit": "",
      "appliesTo": "expansion joint"
    },
    {
      "label": "EXP.GAP (SK)",
      "value": "92",
      "unit": "",
      "appliesTo": "expansion joint"
    },
    {
      "label": "dimension (SQ)",
      "value": "3500",
      "unit": "",
      "appliesTo": "deck/abutment section"
    },
    {
      "label": "vertical dimension",
      "value": "230",
      "unit": "",
      "appliesTo": "deck end"
    },
    {
      "label": "vertical dimension",
      "value": "2650",
      "unit": "",
      "appliesTo": "deck end"
    },
    {
      "label": "horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "left deck underside"
    },
    {
      "label": "horizontal dimension",
      "value": "2850",
      "unit": "",
      "appliesTo": "left deck underside"
    },
    {
      "label": "horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "abutment/pile cap"
    },
    {
      "label": "end spacing",
      "value": "750",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "end spacing",
      "value": "750",
      "unit": "",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "overall pile cap length",
      "value": "12300",
      "unit": "",
      "appliesTo": "pile cap"
    },
    {
      "label": "filter media thickness",
      "value": "600",
      "unit": "THK.",
      "appliesTo": "filter media"
    },
    {
      "label": "bored cast-in-situ pile diameter",
      "value": "1200",
      "unit": "DIA",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "SECTION A-A"
    }
  ],
  "notes": [
    "POT-PTFE BEARING (TYP.)",
    "RCC SEISMIC STOPPER",
    "STONE PITCHING",
    "INDEPENDENT RETAINING WALL",
    "600 THK. FILTER MEDIA",
    "1200 DIA BORED CAST-IN-SITU PILES"
  ],
  "labels": [
    "A2",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "SECTION A-A",
    "(SCALE 1:150)"
  ],
  "description": "This crop shows SECTION A-A through a bridge end support, including the deck expansion-joint area, abutment seat, bearing, seismic stopper, and piled foundation. A sloping wingwall/retaining element, stone pitching, filter media, and a partial independent retaining wall are also shown."
}

p02_r05 section a aSection

  • POT-PTFE bearing×1rectangularMarked TYP.

1070 dimension (SQ.)1236 dimension (SK.)80 EXP.GAP (SQ.)92 EXP.GAP (SK)3500 dimension (SQ)230 vertical dimension2650 vertical dimension1500 horizontal dimension+11 more

Page 3

crop

p03_r02

page 3 · pier_p03_r02
Original
p03_r02
{
  "view": "Cross Section",
  "objects": [
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "profiled barrier",
      "material": "RCC",
      "count": 2,
      "note": "One at each outer edge of the two shown carriageways."
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "Shown adjacent to the outer crash barriers."
    },
    {
      "name": "Wearing course",
      "tag": "",
      "shape": "thin layered strip",
      "material": "WC",
      "count": 2,
      "note": "Called out as 50mm THK. (WC)."
    },
    {
      "name": "Cast-in-situ deck",
      "tag": "",
      "shape": "sloping slab",
      "material": "RCC cast in situ",
      "count": 2,
      "note": "One deck slab is shown for each carriageway."
    },
    {
      "name": "Girder",
      "tag": "",
      "shape": "I-girder / flanged beam profile",
      "material": "",
      "count": 10,
      "note": "Five supporting members are visible below each deck slab."
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 10,
      "note": "Small bearing-like rectangular elements are shown between the girders and pier caps."
    },
    {
      "name": "Pier cap",
      "tag": "",
      "shape": "stepped rectangular cap with sloping top",
      "material": "",
      "count": 2,
      "note": "One cap supports each carriageway."
    },
    {
      "name": "Pier column",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 6,
      "note": "Three vertical columns are shown below each pier cap."
    },
    {
      "name": "Pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Dashed outline below the pier columns."
    },
    {
      "name": "Pile",
      "tag": "P1",
      "shape": "dashed vertical pile symbol",
      "material": "",
      "count": null,
      "note": "Pile symbols are shown below both pile caps; individual pile count is unclear in this crop."
    }
  ],
  "measurements": [
    {
      "label": "overall carriageway width",
      "value": "16550",
      "unit": "",
      "appliesTo": "each shown carriageway"
    },
    {
      "label": "proposed-road centreline spacing",
      "value": "2900",
      "unit": "",
      "appliesTo": "C OF PROPOSED ROAD"
    },
    {
      "label": "carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "each CARRIAGEWAY"
    },
    {
      "label": "edge width",
      "value": "450",
      "unit": "",
      "appliesTo": "deck edge / outer strip"
    },
    {
      "label": "footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "FOOTPATH"
    },
    {
      "label": "edge dimension",
      "value": "100",
      "unit": "",
      "appliesTo": "deck edge / footpath area"
    },
    {
      "label": "wearing-course thickness",
      "value": "50",
      "unit": "mm",
      "appliesTo": "WC"
    },
    {
      "label": "deck slope",
      "value": "2.5%",
      "unit": "",
      "appliesTo": "RCC CAST IN SITU DECK"
    },
    {
      "label": "girder spacing",
      "value": "750",
      "unit": "",
      "appliesTo": "girder layout"
    },
    {
      "label": "end bay dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "pier cap; marked (SQ)"
    },
    {
      "label": "intermediate bay dimension",
      "value": "3500",
      "unit": "",
      "appliesTo": "pier cap; marked (SQ)"
    },
    {
      "label": "pier-cap overall width",
      "value": "16550",
      "unit": "",
      "appliesTo": "each pier cap"
    },
    {
      "label": "pier-column spacing",
      "value": "4500",
      "unit": "",
      "appliesTo": "pier columns"
    },
    {
      "label": "pier-column width / spacing dimension",
      "value": "1000",
      "unit": "",
      "appliesTo": "pier columns"
    },
    {
      "label": "pile spacing",
      "value": "3000",
      "unit": "",
      "appliesTo": "pile layout"
    },
    {
      "label": "pile-cap end offset",
      "value": "775",
      "unit": "",
      "appliesTo": "pile-cap / pile layout"
    },
    {
      "label": "PCTL elevation",
      "value": "515.384",
      "unit": "",
      "appliesTo": "PCTL P1 L/S"
    },
    {
      "label": "PCTL elevation",
      "value": "515.567",
      "unit": "",
      "appliesTo": "PCTL A2 R/S"
    },
    {
      "label": "PCTL elevation",
      "value": "503.316",
      "unit": "",
      "appliesTo": "PCTL P1 L/S"
    },
    {
      "label": "PCTL elevation",
      "value": "503.316",
      "unit": "",
      "appliesTo": "PCTL P1 R/S"
    },
    {
      "label": "PCBL elevation",
      "value": "501.516",
      "unit": "",
      "appliesTo": "PCBL P1 L/S"
    },
    {
      "label": "PCBL elevation",
      "value": "501.516",
      "unit": "",
      "appliesTo": "PCBL P1 R/S"
    },
    {
      "label": "pile tip level",
      "value": "476.566",
      "unit": "",
      "appliesTo": "PILE TIP LVL. P1 L/S"
    },
    {
      "label": "pile tip level",
      "value": "476.566",
      "unit": "",
      "appliesTo": "PILE TIP LVL. P1 R/S"
    },
    {
      "label": "scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "SECTION AT PIER LOCATION"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "50mm THK. (WC)",
    "RCC CAST IN SITU DECK",
    "SLOPE 2.5%"
  ],
  "labels": [
    "C OF PROPOSED ROAD",
    "C OF LHS (CARRIAGEWAY)",
    "C OF RHS (CARRIAGEWAY)",
    "FRL",
    "PCTL P1 L/S 515.384",
    "PCTL A2 R/S 515.567",
    "PCTL P1 L/S 503.316",
    "PCTL P1 R/S 503.316",
    "PCBL P1 L/S 501.516",
    "PCBL P1 R/S 501.516",
    "PILE TIP LVL. P1 L/S 476.566",
    "PILE TIP LVL. P1 R/S 476.566",
    "SECTION AT PIER LOCATION",
    "(SCALE 1:150)",
    "B"
  ],
  "description": "This crop shows a cross section at a pier location for separated left-hand-side and right-hand-side carriageways, divided by the centreline of the proposed road. It documents the deck and edge works above pier caps, three-column pier supports, pile caps, and the indicated pile layout and levels."
}

p03_r02Cross Section

  • Bearing×10rectangularSmall bearing-like rectangular elements are shown between the girders and pier caps.

16550 overall carriageway width2900 proposed-road centreline spacing13500 carriageway width450 edge width1500 footpath width100 edge dimension50 mm wearing-course thickness2.5% deck slope+17 more

crop

p03_r02 cross section of deck and pile group at pier p1

page 3 · structural_drawings_pkg_1_7a22288d85c64bc6bd8c641faee2f453_p03_r02_cross_section_of_deck_and_pile_group_at_pier_p1
Original
p03_r02 cross section of deck and pile group at pier p1
{
  "view": "Cross Section",
  "objects": [
    {
      "name": "cast-in-situ deck slab",
      "tag": "",
      "shape": "sloping slab",
      "material": "RCC cast in situ",
      "count": 2,
      "note": "One deck slab is shown for each carriageway."
    },
    {
      "name": "wearing course",
      "tag": "",
      "shape": "sloping layer",
      "material": "WC",
      "count": 2,
      "note": "Shown over the deck slabs."
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "upstand barrier",
      "material": "RCC",
      "count": 2,
      "note": "Shown at the outer edges of the two carriageways."
    },
    {
      "name": "footpath",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "One footpath is shown at each outer edge."
    },
    {
      "name": "longitudinal girder",
      "tag": "",
      "shape": "rectangular web",
      "material": "",
      "count": 12,
      "note": "Six girder webs are visible beneath each deck slab."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 12,
      "note": "Small bearing blocks are shown between the girders and pier caps."
    },
    {
      "name": "pier cap",
      "tag": "P1",
      "shape": "stepped, variable-depth rectangular cap",
      "material": "",
      "count": 2,
      "note": "Separate caps are shown below the left-side and right-side carriageways."
    },
    {
      "name": "pier column",
      "tag": "P1",
      "shape": "rectangular",
      "material": "",
      "count": 6,
      "note": "Three columns are visible below each pier cap."
    },
    {
      "name": "pile cap",
      "tag": "P1",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Dashed pile caps are shown below ground level."
    },
    {
      "name": "pile",
      "tag": "P1",
      "shape": "circular",
      "material": "",
      "count": 24,
      "note": "Dashed pile outlines are shown in paired groups below each pile cap."
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "16550",
      "unit": "",
      "appliesTo": "left-side carriageway / pier cap / pile cap layout"
    },
    {
      "label": "centre separation",
      "value": "2900",
      "unit": "",
      "appliesTo": "between carriageways at C OF PROPOSED ROAD"
    },
    {
      "label": "overall width",
      "value": "16550",
      "unit": "",
      "appliesTo": "right-side carriageway / pier cap / pile cap layout"
    },
    {
      "label": "edge width",
      "value": "450",
      "unit": "",
      "appliesTo": "left outer deck edge"
    },
    {
      "label": "footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "left footpath"
    },
    {
      "label": "offset",
      "value": "100",
      "unit": "",
      "appliesTo": "left footpath/edge detail"
    },
    {
      "label": "carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "LHS carriageway"
    },
    {
      "label": "edge width",
      "value": "450",
      "unit": "",
      "appliesTo": "left inner deck edge"
    },
    {
      "label": "offset",
      "value": "100",
      "unit": "",
      "appliesTo": "left inner deck edge"
    },
    {
      "label": "edge width",
      "value": "450",
      "unit": "",
      "appliesTo": "right inner deck edge"
    },
    {
      "label": "offset",
      "value": "100",
      "unit": "",
      "appliesTo": "right inner deck edge"
    },
    {
      "label": "carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "RHS carriageway"
    },
    {
      "label": "edge width",
      "value": "450",
      "unit": "",
      "appliesTo": "right outer deck edge"
    },
    {
      "label": "footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "right footpath"
    },
    {
      "label": "offset",
      "value": "100",
      "unit": "",
      "appliesTo": "right footpath/edge detail"
    },
    {
      "label": "wearing course thickness",
      "value": "50",
      "unit": "mm",
      "appliesTo": "WC on left deck"
    },
    {
      "label": "deck slope",
      "value": "2.5%",
      "unit": "",
      "appliesTo": "left RCC cast in situ deck"
    },
    {
      "label": "wearing course thickness",
      "value": "50",
      "unit": "mm",
      "appliesTo": "WC on right deck"
    },
    {
      "label": "deck slope",
      "value": "2.5%",
      "unit": "",
      "appliesTo": "right RCC cast in situ deck"
    },
    {
      "label": "girder spacing",
      "value": "750",
      "unit": "",
      "appliesTo": "left deck girders"
    },
    {
      "label": "girder spacing",
      "value": "750",
      "unit": "",
      "appliesTo": "right deck girders"
    },
    {
      "label": "pier cap end bay",
      "value": "1275",
      "unit": "",
      "appliesTo": "left pier cap"
    },
    {
      "label": "pier cap bays",
      "value": "3500",
      "unit": "",
      "appliesTo": "left pier cap"
    },
    {
      "label": "pier cap overall width",
      "value": "16550",
      "unit": "",
      "appliesTo": "left pier cap"
    },
    {
      "label": "pier column spacing",
      "value": "4500",
      "unit": "",
      "appliesTo": "left pier columns"
    },
    {
      "label": "pier column dimension",
      "value": "1000",
      "unit": "",
      "appliesTo": "left pier columns"
    },
    {
      "label": "pier cap end bay",
      "value": "1275",
      "unit": "",
      "appliesTo": "right pier cap"
    },
    {
      "label": "pier cap bays",
      "value": "3500",
      "unit": "",
      "appliesTo": "right pier cap"
    },
    {
      "label": "pier cap overall width",
      "value": "16550",
      "unit": "",
      "appliesTo": "right pier cap"
    },
    {
      "label": "pier column spacing",
      "value": "4500",
      "unit": "",
      "appliesTo": "right pier columns"
    },
    {
      "label": "pier column dimension",
      "value": "1000",
      "unit": "",
      "appliesTo": "right pier columns"
    },
    {
      "label": "PCTL P1 L/S",
      "value": "515.384",
      "unit": "",
      "appliesTo": "left-side level"
    },
    {
      "label": "PCTL A2 R/S",
      "value": "515.567",
      "unit": "",
      "appliesTo": "right-side level"
    },
    {
      "label": "PCTL P1 L/S",
      "value": "503.316",
      "unit": "",
      "appliesTo": "left-side level"
    },
    {
      "label": "PCTL P1 R/S",
      "value": "503.316",
      "unit": "",
      "appliesTo": "right-side level"
    },
    {
      "label": "PCBL P1 L/S",
      "value": "501.516",
      "unit": "",
      "appliesTo": "left pile cap level"
    },
    {
      "label": "PCBL P1 R/S",
      "value": "501.516",
      "unit": "",
      "appliesTo": "right pile cap level"
    },
    {
      "label": "PILE TIP LVL. P1 L/S",
      "value": "476.566",
      "unit": "",
      "appliesTo": "left piles"
    },
    {
      "label": "PILE TIP LVL. P1 R/S",
      "value": "476.566",
      "unit": "",
      "appliesTo": "right piles"
    },
    {
      "label": "pile spacing",
      "value": "3000",
      "unit": "",
      "appliesTo": "left pile layout"
    },
    {
      "label": "pile cap end offset",
      "value": "775",
      "unit": "",
      "appliesTo": "left pile cap layout"
    },
    {
      "label": "pile cap overall width",
      "value": "16550",
      "unit": "",
      "appliesTo": "left pile cap"
    },
    {
      "label": "pile spacing",
      "value": "3000",
      "unit": "",
      "appliesTo": "right pile layout"
    },
    {
      "label": "pile cap end offset",
      "value": "775",
      "unit": "",
      "appliesTo": "right pile cap layout"
    },
    {
      "label": "pile cap overall width",
      "value": "16550",
      "unit": "",
      "appliesTo": "right pile cap"
    },
    {
      "label": "scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "SECTION AT PIER LOCATION"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "FOOTPATH",
    "50mm THK. (WC)",
    "RCC CAST IN SITU DECK",
    "SLOPE 2.5%"
  ],
  "labels": [
    "C OF PROPOSED ROAD",
    "C OF LHS (CARRIAGEWAY)",
    "C OF RHS (CARRIAGEWAY)",
    "FRL",
    "SECTION AT PIER LOCATION",
    "(SCALE 1:150)",
    "B"
  ],
  "description": "This crop is a transverse section at a pier location, showing separate left-side and right-side carriageway decks about the centreline of the proposed road. It documents the deck crossfall, footpaths and crash barriers, girder and bearing arrangement, pier caps and columns, and the piled foundations below the indicated levels."
}

p03_r02 cross section of deck and pile group at pier p1Cross Section

  • bearing×12rectangularSmall bearing blocks are shown between the girders and pier caps.

16550 overall width2900 centre separation16550 overall width450 edge width1500 footpath width100 offset13500 carriageway width450 edge width+38 more