Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Vertical Support Member

1 page · 2 crops · ×4 · substructure

Matched toPier Shaftbridge.substructure.pier_system.pier_shaftcheckon “vertical support member”

1 read off the drawings · 3 not established
The class asks forValueHowFrom
HeightHwants m/mmnot establishedElevations are shown at the vertical end members and adjacent bent cap, but the readings do not explicitly identify the member top and base elevations that form a single vertical end member height. No unambiguous height dimension is provided.not found
Instance CountNwants count2 countThe elevation object listing states that two vertical end members are shown, one at each end of the bent cap.readp17 · p17_r05 elevation bent 4 right looking aheadp17 · p17_r06 elevation of bent 4 right cap piles and piers
Concrete Gradefcknot establishedNo concrete class, strength, or fck value is stated for the vertical end members in the supplied readings.not found
Cross-sectional AreaAwants m2/mm2not establishedNo cross-sectional dimensions or section detail for the vertical end members is provided, so area cannot be calculated.not found

Worked out by openai/gpt-5.6-terra-pro from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

How the sheets named it

vertical end member

Notes on the sheets that carry it

  • p174-440 OVER EACH PILE
  • p172-445A, TYP.
  • p177-441 AT EQ. SPS. TYP. EA. BAY
  • p174-441 AT EQ. SPACES

Every crop it was read in — the drawing beside what the model took off it

Page 17

crop

p17_r05 elevation bent 4 right looking ahead

page 17 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p17_r05_elevation_bent_4_right_looking_ahead
Original
p17_r05 elevation bent 4 right looking ahead
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bent cap",
      "tag": "",
      "shape": "long rectangular member with sloping top and bottom edges",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown spanning across six visible pile locations."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "rectangular in elevation",
      "material": "",
      "count": 6,
      "note": "Vertical piles are shown below the bent cap."
    },
    {
      "name": "vertical end member",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One member is shown at each end of the bent cap."
    },
    {
      "name": "reinforcement bar",
      "tag": "440",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": null,
      "note": "4-440 OVER EACH PILE."
    },
    {
      "name": "reinforcement bar",
      "tag": "442",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 2,
      "note": "2-442."
    },
    {
      "name": "reinforcement bar",
      "tag": "1040",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 4,
      "note": "4-1040."
    },
    {
      "name": "reinforcement bar",
      "tag": "441",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": null,
      "note": "4-441 AT EQ. SPACES at each end; 7-441 AT EQ. SPS. TYP. EA. BAY."
    },
    {
      "name": "reinforcement bar",
      "tag": "445A",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 2,
      "note": "2-445A, TYP."
    },
    {
      "name": "reinforcement bar",
      "tag": "445B",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 2,
      "note": "2-445B."
    },
    {
      "name": "reinforcement bar",
      "tag": "445C",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 2,
      "note": "2-445C."
    }
  ],
  "measurements": [
    {
      "label": "elevation",
      "value": "EL. 189.42",
      "unit": "",
      "appliesTo": "left vertical end member"
    },
    {
      "label": "elevation",
      "value": "EL. 189.50",
      "unit": "",
      "appliesTo": "left vertical end member"
    },
    {
      "label": "elevation",
      "value": "EL. 186.04",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.93",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.80",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.67",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.53",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.37",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 184.04",
      "unit": "",
      "appliesTo": "left end of bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 183.25",
      "unit": "",
      "appliesTo": "right end of bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 188.67",
      "unit": "",
      "appliesTo": "right vertical end member"
    },
    {
      "label": "elevation",
      "value": "EL. 188.71",
      "unit": "",
      "appliesTo": "right vertical end member"
    },
    {
      "label": "reinforcement quantity",
      "value": "4-440 OVER EACH PILE",
      "unit": "",
      "appliesTo": "440"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-442",
      "unit": "",
      "appliesTo": "442"
    },
    {
      "label": "reinforcement quantity",
      "value": "4-1040",
      "unit": "",
      "appliesTo": "1040"
    },
    {
      "label": "reinforcement quantity",
      "value": "7-441 AT EQ. SPS. TYP. EA. BAY",
      "unit": "",
      "appliesTo": "441"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-445A, TYP.",
      "unit": "",
      "appliesTo": "445A"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-445B",
      "unit": "",
      "appliesTo": "445B"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-445C",
      "unit": "",
      "appliesTo": "445C"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "4-441 AT EQ. SPACES",
      "unit": "",
      "appliesTo": "441"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "4-441 AT EQ. SPACES",
      "unit": "",
      "appliesTo": "441"
    },
    {
      "label": "spacing",
      "value": "10\"",
      "unit": "",
      "appliesTo": "pile/bent cap reinforcement"
    },
    {
      "label": "spacing",
      "value": "10\", TYP.",
      "unit": "",
      "appliesTo": "pile/bent cap reinforcement"
    },
    {
      "label": "spacing",
      "value": "10\", TYP.",
      "unit": "",
      "appliesTo": "pile/bent cap reinforcement"
    },
    {
      "label": "dimension",
      "value": "2'-10 1/8\"",
      "unit": "",
      "appliesTo": "Bent 4 Right dimension chain"
    },
    {
      "label": "dimension",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "Bent 4 Right dimension chain"
    },
    {
      "label": "dimension",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "Bent 4 Right dimension chain"
    },
    {
      "label": "dimension",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "Bent 4 Right dimension chain"
    },
    {
      "label": "dimension",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "Bent 4 Right dimension chain"
    },
    {
      "label": "dimension",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "Bent 4 Right dimension chain"
    },
    {
      "label": "dimension",
      "value": "3'-3 5/8\"",
      "unit": "",
      "appliesTo": "Bent 4 Right dimension chain"
    },
    {
      "label": "overall dimension",
      "value": "44'-11 1/16\"",
      "unit": "",
      "appliesTo": "Bent 4 Right"
    }
  ],
  "notes": [],
  "labels": [
    "(BENT 4 RIGHT)",
    "A",
    "B",
    "ELEVATION",
    "(BENT 4 RIGHT LOOKING AHEAD)"
  ],
  "description": "This crop shows the elevation for Bent 4 Right looking ahead. It documents the sloping bent cap supported on six visible piles, its end members, reinforcement callouts, elevations, and the transverse dimension chain."
}

p17_r05 elevation bent 4 right looking aheadElevation

  • vertical end member×2rectangularOne member is shown at each end of the bent cap.

EL. 189.42 elevationEL. 189.50 elevationEL. 186.04 elevationEL. 185.93 elevationEL. 185.80 elevationEL. 185.67 elevationEL. 185.53 elevationEL. 185.37 elevation+24 more

crop

p17_r06 elevation of bent 4 right cap piles and piers

page 17 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p17_r06_elevation_of_bent_4_right_cap_piles_and_piers
Original
p17_r06 elevation of bent 4 right cap piles and piers
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bent cap",
      "tag": "",
      "shape": "long horizontal rectangular member with stepped/sloping top profile",
      "material": "",
      "count": 1,
      "note": "Shown spanning between the two end upstanding members."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "narrow rectangular profile with dashed continuation below cap",
      "material": "",
      "count": 6,
      "note": "Six pile locations are visibly shown beneath the bent cap; callout states 4-440 OVER EACH PILE."
    },
    {
      "name": "vertical end member",
      "tag": "",
      "shape": "tall rectangular",
      "material": "",
      "count": 2,
      "note": "Unlabeled upstanding members at the left and right ends of the elevation."
    },
    {
      "name": "reinforcement bar group",
      "tag": "4-440",
      "shape": "not fully shown",
      "material": "reinforcing steel",
      "count": 4,
      "note": "OVER EACH PILE."
    },
    {
      "name": "reinforcement bar group",
      "tag": "2-442",
      "shape": "not fully shown",
      "material": "reinforcing steel",
      "count": 2,
      "note": ""
    },
    {
      "name": "reinforcement bar group",
      "tag": "4-1040",
      "shape": "not fully shown",
      "material": "reinforcing steel",
      "count": 4,
      "note": ""
    },
    {
      "name": "reinforcement bar group",
      "tag": "2-445A",
      "shape": "not fully shown",
      "material": "reinforcing steel",
      "count": 2,
      "note": "TYP."
    },
    {
      "name": "reinforcement bar group",
      "tag": "2-445B",
      "shape": "not fully shown",
      "material": "reinforcing steel",
      "count": 2,
      "note": ""
    },
    {
      "name": "reinforcement bar group",
      "tag": "2-445C",
      "shape": "not fully shown",
      "material": "reinforcing steel",
      "count": 2,
      "note": ""
    },
    {
      "name": "reinforcement bar group",
      "tag": "7-441",
      "shape": "not fully shown",
      "material": "reinforcing steel",
      "count": 7,
      "note": "AT EQ. SPS. TYP. EA. BAY."
    },
    {
      "name": "reinforcement bar group",
      "tag": "4-441",
      "shape": "not fully shown",
      "material": "reinforcing steel",
      "count": 4,
      "note": "AT EQ. SPACES."
    }
  ],
  "measurements": [
    {
      "label": "Elevation",
      "value": "EL. 189.42",
      "unit": "",
      "appliesTo": "left end vertical member"
    },
    {
      "label": "Elevation",
      "value": "EL. 189.50",
      "unit": "",
      "appliesTo": "left end vertical member"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.04",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.93",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.80",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.67",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.53",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.37",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 184.04",
      "unit": "",
      "appliesTo": "left end of bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 183.25",
      "unit": "",
      "appliesTo": "right end of bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 188.67",
      "unit": "",
      "appliesTo": "right end vertical member"
    },
    {
      "label": "Elevation",
      "value": "EL. 188.71",
      "unit": "",
      "appliesTo": "right end vertical member"
    },
    {
      "label": "left end spacing",
      "value": "2'-10 1/8\"",
      "unit": "",
      "appliesTo": "between left end reference line and first pile line"
    },
    {
      "label": "typical pile spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "pile locations"
    },
    {
      "label": "right end spacing",
      "value": "3'-3 5/8\"",
      "unit": "",
      "appliesTo": "between last pile line and right end reference line"
    },
    {
      "label": "overall length",
      "value": "44'-1 1/16\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "typical dimension",
      "value": "10\"",
      "unit": "",
      "appliesTo": "pile/end spacing locations"
    }
  ],
  "notes": [
    "4-440 OVER EACH PILE",
    "2-445A, TYP.",
    "7-441 AT EQ. SPS. TYP. EA. BAY",
    "4-441 AT EQ. SPACES"
  ],
  "labels": [
    "A",
    "B",
    "ELEVATION",
    "(BENT 4 RIGHT LOOKING AHEAD)"
  ],
  "description": "This crop is an elevation titled ELEVATION (BENT 4 RIGHT LOOKING AHEAD). It shows a single bent cap supported at six visible pile locations, with two unlabeled upstanding end members and reinforcing-bar callouts. Section indicators A and B are shown along the elevation."
}

p17_r06 elevation of bent 4 right cap piles and piersElevation

  • vertical end member×2tall rectangularUnlabeled upstanding members at the left and right ends of the elevation.

EL. 189.42 ElevationEL. 189.50 ElevationEL. 186.04 ElevationEL. 185.93 ElevationEL. 185.80 ElevationEL. 185.67 ElevationEL. 185.53 ElevationEL. 185.37 Elevation+9 more