Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Silicone Joint Sealant

3 pages · 7 crops · ×6 · deck

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a joint sealant component class.

How the sheets named it

Preformed silicone joint sealSilicone adhesivepreformed silicone joint sealsilicone adhesivesilicone sealantLow modulus silicone sealant (Type A)low modulus sealantsilicone sealant joint sealersilicone sealant / type joint sealer*TYPE A

Every dimension read for it4

  • 1 3/8"Joint opening widthp4 · p04_r05
  • 1 3/8″joint opening widthp4 · p04_r05 expansion joint details
  • 1/4”joint-sealer detail dimensionp9 · p09_r03
  • 1/2”joint-sealer detail dimensionp9 · p09_r03

Notes on the sheets that carry it

  • p4PRE-FORMED SILICONE JOINT SEAL AS PER SPECIAL PROVISION SECTION 449
  • p4FILLER MATERIAL IN ACCORDANCE WITH SUB-SECTION 833.2.01 OF THE GEORGIA DOT SPECIFICATIONS, HOLD IN PLACE WITH 10d GALV. NAILS
  • p4* PREFORMED SILICONE JOINT SEAL AS PER SPECIAL PROVISION SECTION 449
  • p4SILICONE ADHESIVE
  • p53/4" CHAMFER
  • p51" PREFORMED JOINT FILLER
  • p5LOW MODULUS SILICONE SEALANT (TYPE A)
  • p5HOLD IN PLACE WITH 10d GALV. NAILS.
  • p5BARS ARE DETAILED IN BAR DETAILS AS EQUIVALENT FULL LENGTH BARS.
  • p5* SEE SUBSECTION 511.3.05.G.5 OF THE GEORGIA DOT SPECIFICATION FOR PLACEMENT OF 500B BAR.
  • p5LOW MODULUS SIL[partial] SEALANT (TYPE A[partial]
  • p9SEE DETAIL “A”
  • p9REQ'D. CONST. JOINT
  • p9BEARING PADS NOT SHOWN
  • p9SLAB REINFORCEMENT NOT SHOWN
  • p9TOP OF BEAM
  • p9SILICONE SEALANT TYPE JOINT SEALER (TYPE B, C OR D)
  • p9ROUND TO 1/4” R
  • p9REQUIRED CONST. JOINT., TYP.
  • p9BENT 2 SHOWN
  • p9BENT 3 SIMILAR

Every crop it was read in — the drawing beside what the model took off it

Page 4

crop

p04_r05

page 4 · expansion_joint_p04_r05
Original
p04_r05
{
  "view": "Detail",
  "objects": [
    {
      "name": "Preformed silicone joint seal",
      "tag": "*",
      "shape": "bulbous profile",
      "material": "silicone",
      "count": 1,
      "note": "Installed within the expansion-joint opening."
    },
    {
      "name": "Silicone adhesive",
      "tag": "",
      "shape": "beads along joint sides",
      "material": "silicone",
      "count": 2,
      "note": "Shown at both sides of the joint seal."
    },
    {
      "name": "Filler material",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Hatched material below the joint seal."
    }
  ],
  "measurements": [
    {
      "label": "Joint opening width",
      "value": "1 3/8\"",
      "unit": "",
      "appliesTo": "Preformed silicone joint seal"
    },
    {
      "label": "Vertical recess dimension",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "Expansion joint detail"
    },
    {
      "label": "Radius",
      "value": "1/4\" R",
      "unit": "",
      "appliesTo": "Expansion joint edge"
    },
    {
      "label": "Filler material dimension",
      "value": "4\"",
      "unit": "",
      "appliesTo": "Filler material"
    }
  ],
  "notes": [
    "PRE-FORMED SILICONE JOINT SEAL AS PER SPECIAL PROVISION SECTION 449",
    "FILLER MATERIAL IN ACCORDANCE WITH SUB-SECTION 833.2.01 OF THE GEORGIA DOT SPECIFICATIONS, HOLD IN PLACE WITH 10d GALV. NAILS"
  ],
  "labels": [
    "EXPANSION JOINT DETAILS",
    "END BENTS 1 AND 4",
    "NO SCALE"
  ],
  "description": "This crop shows an expansion joint cross-sectional detail for end bents 1 and 4. It depicts a preformed silicone joint seal with silicone adhesive and filler material below the seal."
}

p04_r05Detail

  • Preformed silicone joint seal*×1bulbous profilesiliconeInstalled within the expansion-joint opening.
  • Silicone adhesive×2beads along joint sidessiliconeShown at both sides of the joint seal.

1 3/8" Joint opening width1/2" Vertical recess dimension1/4" R Radius4" Filler material dimension

crop

p04_r05 expansion joint details

page 4 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p04_r05_expansion_joint_details
Original
p04_r05 expansion joint details
{
  "view": "Detail",
  "objects": [
    {
      "name": "preformed silicone joint seal",
      "tag": "*",
      "shape": "profiled compression seal",
      "material": "silicone",
      "count": 1,
      "note": "Installed in expansion joint."
    },
    {
      "name": "silicone adhesive",
      "tag": "",
      "shape": "applied at joint side faces",
      "material": "silicone",
      "count": null,
      "note": ""
    },
    {
      "name": "filler material",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Held in place with 10d galvanized nails."
    },
    {
      "name": "concrete end bent/joint faces",
      "tag": "",
      "shape": "rectangular vertical faces with rounded top corners",
      "material": "",
      "count": 2,
      "note": "Detail applies to end bents 1 and 4."
    }
  ],
  "measurements": [
    {
      "label": "joint opening width",
      "value": "1 3/8″",
      "unit": "",
      "appliesTo": "preformed silicone joint seal"
    },
    {
      "label": "vertical dimension",
      "value": "1/2″",
      "unit": "",
      "appliesTo": "concrete end bent/joint faces"
    },
    {
      "label": "radius",
      "value": "1/4″ R",
      "unit": "",
      "appliesTo": "concrete end bent/joint face corner"
    },
    {
      "label": "nail size",
      "value": "10d",
      "unit": "",
      "appliesTo": "filler material"
    }
  ],
  "notes": [
    "* PREFORMED SILICONE JOINT SEAL AS PER SPECIAL PROVISION SECTION 449",
    "SILICONE ADHESIVE",
    "FILLER MATERIAL IN ACCORDANCE WITH SUB-SECTION 833.2.01 OF THE GEORGIA DOT SPECIFICATIONS, HOLD IN PLACE WITH 10d GALV. NAILS"
  ],
  "labels": [
    "EXPANSION JOINT DETAILS",
    "END BENTS 1 AND 4",
    "NO SCALE"
  ],
  "description": "This crop shows a cross-sectional expansion-joint detail for end bents 1 and 4. It depicts a preformed silicone joint seal installed between opposing end-bent faces with silicone adhesive and filler material below the seal."
}

p04_r05 expansion joint detailsDetail

  • preformed silicone joint seal*×1profiled compression sealsiliconeInstalled in expansion joint.
  • silicone adhesiveapplied at joint side facessilicone

1 3/8″ joint opening width1/2″ vertical dimension1/4″ R radius10d nail size

Page 5

crop

p05_r03

page 5 · barrier_expansion_joint_p05_r03
Original
p05_r03
{
  "view": "Detail",
  "objects": [
    {
      "name": "barrier",
      "tag": "",
      "shape": "rectangular in plan and elevation; tapered in side elevation",
      "material": "",
      "count": null,
      "note": "Barrier expansion-joint detail shown in plan, elevation, and side elevation."
    },
    {
      "name": "expansion joint",
      "tag": "",
      "shape": "vertical linear joint",
      "material": "",
      "count": null,
      "note": "Shown between barrier sections."
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "rectangular vertical strip",
      "material": "preformed joint filler",
      "count": null,
      "note": "Shown within the 1-inch expansion joint."
    },
    {
      "name": "silicone sealant",
      "tag": "TYPE A",
      "shape": "narrow linear seal at joint base",
      "material": "low modulus silicone",
      "count": null,
      "note": ""
    },
    {
      "name": "chamfer",
      "tag": "",
      "shape": "beveled edge",
      "material": "",
      "count": null,
      "note": ""
    },
    {
      "name": "galvanized nails",
      "tag": "",
      "shape": "",
      "material": "galvanized",
      "count": null,
      "note": "Specified to hold joint filler in place."
    }
  ],
  "measurements": [
    {
      "label": "CHAMFER",
      "value": "3/4\"",
      "unit": "",
      "appliesTo": "chamfer"
    },
    {
      "label": "joint dimension",
      "value": "3/4\"",
      "unit": "",
      "appliesTo": "expansion joint"
    },
    {
      "label": "PREFORMED JOINT FILLER",
      "value": "1\"",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "GALV. NAILS",
      "value": "10d",
      "unit": "",
      "appliesTo": "galvanized nails"
    },
    {
      "label": "side elevation dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "barrier"
    }
  ],
  "notes": [
    "3/4\" CHAMFER",
    "1\" PREFORMED JOINT FILLER",
    "LOW MODULUS SILICONE SEALANT (TYPE A)",
    "HOLD IN PLACE WITH 10d GALV. NAILS."
  ],
  "labels": [
    "PLAN",
    "ELEVATION",
    "SIDE ELEVATION",
    "DETAILS OF 1\" EXPANSION JOINT IN BARRIER",
    "NO SCALE",
    "GDOT",
    "P.I. NO.",
    "0019181"
  ],
  "description": "This crop is a no-scale detail of a 1-inch expansion joint in a barrier. It includes plan, elevation, and side-elevation representations showing preformed joint filler, low modulus silicone sealant, chamfering, and galvanized nail retention."
}

p05_r03Detail

  • silicone sealantTYPE Anarrow linear seal at joint baselow modulus silicone

3/4" CHAMFER3/4" joint dimension1" PREFORMED JOINT FILLER10d GALV. NAILS3" side elevation dimension

crop

p05_r03 details of 1 expansion joint in barrier

page 5 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p05_r03_details_of_1_expansion_joint_in_barrier
Original
p05_r03 details of 1 expansion joint in barrier
{
  "view": "Detail",
  "objects": [
    {
      "name": "Barrier",
      "tag": "",
      "shape": "tapered",
      "material": "",
      "count": null,
      "note": "Shown in side elevation only; expansion joint occurs at barrier base/through barrier."
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "vertical joint",
      "material": "",
      "count": null,
      "note": "Detail title identifies a 1” expansion joint in barrier."
    },
    {
      "name": "Preformed joint filler",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": null,
      "note": "Shown hatched in plan and elevation."
    },
    {
      "name": "Low modulus silicone sealant (Type A)",
      "tag": "",
      "shape": "linear joint sealant",
      "material": "silicone",
      "count": null,
      "note": "Shown at the joint."
    },
    {
      "name": "Chamfer",
      "tag": "",
      "shape": "chamfered edge",
      "material": "",
      "count": null,
      "note": "Shown in plan."
    },
    {
      "name": "Galvanized nails",
      "tag": "",
      "shape": "",
      "material": "galvanized steel",
      "count": null,
      "note": "Specified to hold the filler in place; nail size is 10d."
    }
  ],
  "measurements": [
    {
      "label": "Chamfer",
      "value": "3/4”",
      "unit": "",
      "appliesTo": "Chamfer"
    },
    {
      "label": "Dimension",
      "value": "3/4”",
      "unit": "",
      "appliesTo": "Expansion joint detail, plan"
    },
    {
      "label": "Preformed joint filler thickness",
      "value": "1”",
      "unit": "",
      "appliesTo": "Preformed joint filler"
    },
    {
      "label": "Dimension",
      "value": "3/4”",
      "unit": "",
      "appliesTo": "Expansion joint detail, elevation"
    },
    {
      "label": "Barrier/base dimension",
      "value": "3”",
      "unit": "",
      "appliesTo": "Barrier side elevation"
    },
    {
      "label": "Expansion joint size",
      "value": "1”",
      "unit": "",
      "appliesTo": "Expansion joint"
    }
  ],
  "notes": [
    "3/4” CHAMFER",
    "1” PREFORMED JOINT FILLER",
    "LOW MODULUS SILICONE SEALANT (TYPE A)",
    "HOLD IN PLACE WITH 10d GALV. NAILS."
  ],
  "labels": [
    "PLAN",
    "ELEVATION",
    "SIDE ELEVATION",
    "DETAILS OF 1” EXPANSION JOINT IN BARRIER",
    "NO SCALE",
    "P.I. NO.",
    "0019181"
  ],
  "description": "This crop shows details of a 1” expansion joint in a barrier, with plan, elevation, and side-elevation views. The detail identifies preformed joint filler, Type A low modulus silicone sealant, 3/4” chamfers, and galvanized nails for holding the filler in place."
}

p05_r03 details of 1 expansion joint in barrierDetail

  • Low modulus silicone sealant (Type A)linear joint sealantsiliconeShown at the joint.

3/4” Chamfer3/4” Dimension1” Preformed joint filler thickness3/4” Dimension3” Barrier/base dimension1” Expansion joint size

crop

p05_r04

page 5 · slab_reinforcement_at_skewed_joint_p05_r04
Original
p05_r04
{
  "view": "Detail",
  "objects": [
    {
      "name": "main slab reinforcement bars",
      "tag": "*500B",
      "shape": "bent bars",
      "material": "steel reinforcement",
      "count": 5,
      "note": "Bars shown terminating/bending at skewed joint."
    },
    {
      "name": "construction joint",
      "tag": "B.F.P.R. OR CONST. JOINT",
      "shape": "skewed diagonal joint line",
      "material": "",
      "count": 1,
      "note": "Shown through main slab reinforcement detail."
    },
    {
      "name": "chamfer",
      "tag": "",
      "shape": "chamfered edge",
      "material": "",
      "count": null,
      "note": "Callout is partially cropped."
    },
    {
      "name": "low modulus sealant",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Callout text is partially cropped."
    }
  ],
  "measurements": [
    {
      "label": "clearance",
      "value": "2\"",
      "unit": "",
      "appliesTo": "main slab reinforcement bars"
    },
    {
      "label": "chamfer",
      "value": "3/4\"",
      "unit": "",
      "appliesTo": "chamfer"
    }
  ],
  "notes": [
    "BARS ARE DETAILED IN BAR DETAILS AS EQUIVALENT FULL LENGTH BARS.",
    "* SEE SUBSECTION 511.3.05.G.5 OF THE GEORGIA DOT SPECIFICATION FOR PLACEMENT OF 500B BAR.",
    "LOW MODULUS SIL[partial] SEALANT (TYPE A[partial]"
  ],
  "labels": [
    "MAIN SLAB REINF.",
    "B.F.P.R. OR CONST. JOINT",
    "AT B.F.P.R. OR CONST. JOINT",
    "⊥ ℄ BRIDGE",
    "BAR BENDING DETAILS AT SKEWED JOINTS",
    "NO SCALE"
  ],
  "description": "This crop shows a bar-bending detail for main slab reinforcement at a skewed B.F.P.R. or construction joint. Five bent reinforcement bars are depicted adjacent to the diagonal joint, with a 2 inch clear dimension and notes referring to equivalent full-length bar detailing and placement of the 500B bar."
}

p05_r04Detail

  • low modulus sealantCallout text is partially cropped.

2" clearance3/4" chamfer

Page 9

crop

p09_r03

page 9 · bridge_deck_edge_beam_and_diaphragm_reinforcement_details_p09_r03
Original
p09_r03
{
  "view": "Section",
  "objects": [
    {
      "name": "edge beam",
      "tag": "",
      "shape": "stepped rectangular section",
      "material": "",
      "count": 1,
      "note": "Shown in SECTION THRU EDGE BEAM."
    },
    {
      "name": "concrete diaphragm",
      "tag": "",
      "shape": "rectangular vertical diaphragm",
      "material": "concrete",
      "count": 1,
      "note": "Shown in SECTION THRU DIAPHRAGM, SPAN 2."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "horizontal rectangular section",
      "material": "",
      "count": 2,
      "note": "Slab reinforcement is noted as not shown."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "vertical joint",
      "material": "",
      "count": null,
      "note": "Required construction joint is shown at the edge beam and in Detail “A”."
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "vertical strip",
      "material": "",
      "count": 1,
      "note": "Called out as 1” preformed joint filler."
    },
    {
      "name": "silicone sealant joint sealer",
      "tag": "",
      "shape": "recessed joint seal",
      "material": "silicone sealant",
      "count": 1,
      "note": "Shown in Detail “A”."
    },
    {
      "name": "reinforcement bar",
      "tag": "506A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Spaced at 18”."
    },
    {
      "name": "reinforcement bar",
      "tag": "800",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Two bars called out in the edge-beam section."
    },
    {
      "name": "reinforcement bar",
      "tag": "508",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "509",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "801",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "802",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "404",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "403B",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "402B",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Called out as 4-402B."
    },
    {
      "name": "reinforcement bar",
      "tag": "507B",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Two 507B bars are called out at the upper location and two at the lower location."
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Called out as 1” DIA. PLAIN BAR."
    }
  ],
  "measurements": [
    {
      "label": "reinforcement spacing",
      "value": "18”",
      "unit": "",
      "appliesTo": "506A"
    },
    {
      "label": "horizontal dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "edge beam"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0 1/2”",
      "unit": "",
      "appliesTo": "edge beam construction joint"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0 1/2”",
      "unit": "",
      "appliesTo": "edge beam construction joint"
    },
    {
      "label": "horizontal dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "edge beam"
    },
    {
      "label": "clear cover",
      "value": "4”",
      "unit": "",
      "appliesTo": "800 reinforcement bar"
    },
    {
      "label": "vertical dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "edge beam"
    },
    {
      "label": "clear cover",
      "value": "1 1/2”",
      "unit": "",
      "appliesTo": "edge beam reinforcement"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0”",
      "unit": "",
      "appliesTo": "edge beam construction joint"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0”",
      "unit": "",
      "appliesTo": "edge beam construction joint"
    },
    {
      "label": "preformed joint filler thickness",
      "value": "1”",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "concrete diaphragm thickness",
      "value": "10”",
      "unit": "",
      "appliesTo": "concrete diaphragm"
    },
    {
      "label": "vertical dimension",
      "value": "2”",
      "unit": "",
      "appliesTo": "diaphragm section"
    },
    {
      "label": "vertical dimension",
      "value": "3'-0”",
      "unit": "",
      "appliesTo": "diaphragm section"
    },
    {
      "label": "clear cover",
      "value": "1 1/2”",
      "unit": "",
      "appliesTo": "diaphragm reinforcement"
    },
    {
      "label": "plain bar diameter",
      "value": "1”",
      "unit": "",
      "appliesTo": "plain bar"
    },
    {
      "label": "joint-sealer detail dimension",
      "value": "1/4”",
      "unit": "",
      "appliesTo": "silicone sealant joint sealer"
    },
    {
      "label": "joint-sealer detail dimension",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "silicone sealant joint sealer"
    },
    {
      "label": "joint width",
      "value": "3/4”",
      "unit": "",
      "appliesTo": "construction joint"
    },
    {
      "label": "radius",
      "value": "1/4” R",
      "unit": "",
      "appliesTo": "Detail “A”"
    },
    {
      "label": "scale",
      "value": "3/4” = 1'-0”",
      "unit": "",
      "appliesTo": "SECTION THRU EDGE BEAM"
    },
    {
      "label": "scale",
      "value": "3/4” = 1'-0”",
      "unit": "",
      "appliesTo": "SECTION THRU DIAPHRAGM"
    }
  ],
  "notes": [
    "SEE DETAIL “A”",
    "REQ'D. CONST. JOINT",
    "* 1” PREFORMED JOINT FILLER",
    "BEARING PADS NOT SHOWN",
    "SLAB REINFORCEMENT NOT SHOWN",
    "TOP OF BEAM",
    "SILICONE SEALANT TYPE JOINT SEALER (TYPE B, C OR D)",
    "ROUND TO 1/4” R",
    "REQUIRED CONST. JOINT., TYP."
  ],
  "labels": [
    "SR 21/MILLEN BYPASS",
    "CONSTRUCTION",
    "SYMMETRY",
    "SECTION THRU EDGE BEAM",
    "BENT 2 SHOWN",
    "BENT 3 SIMILAR",
    "SECTION THRU DIAPHRAGM",
    "SPAN 2",
    "DETAIL “A”",
    "NO SCALE"
  ],
  "description": "This crop shows a section through an edge beam for Bent 2, with Bent 3 noted similar, and a separate section through a 10-inch concrete diaphragm in Span 2. It also includes Detail “A” for the required construction-joint sealant and joint-filler arrangement, together with reinforcement callouts for the edge beam and diaphragm."
}

p09_r03Section

  • silicone sealant joint sealer×1recessed joint sealsilicone sealantShown in Detail “A”.

18” reinforcement spacing8” horizontal dimension1'-0 1/2” horizontal dimension1'-0 1/2” horizontal dimension8” horizontal dimension4” clear cover8” vertical dimension1 1/2” clear cover+14 more

crop

p09_r03 detail a

page 9 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p09_r03_detail_a
Original
p09_r03 detail a
{
  "view": "Section",
  "objects": [
    {
      "name": "edge beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown in section at left."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Slab reinforcement is noted as not shown."
    },
    {
      "name": "concrete diaphragm",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "Shown in section at right."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "vertical joint",
      "material": "",
      "count": 2,
      "note": "Required construction joint is indicated in the edge-beam section and Detail \"A\"."
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 1,
      "note": "Called out as 1\" preformed joint filler."
    },
    {
      "name": "silicone sealant / type joint sealer",
      "tag": "",
      "shape": "joint sealant bead",
      "material": "silicone",
      "count": 1,
      "note": "Shown in Detail \"A\"; type B, C or D."
    },
    {
      "name": "bearing pads",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Not shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "506A",
      "shape": "bent bar",
      "material": "",
      "count": null,
      "note": "Called out at 18\"."
    },
    {
      "name": "reinforcement bar",
      "tag": "2-800",
      "shape": "bent bar",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "508",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "509",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "I-801",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "I-802",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "404",
      "shape": "straight bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "2-507B",
      "shape": "bar group",
      "material": "",
      "count": 4,
      "note": "Two groups are called out in the diaphragm section."
    },
    {
      "name": "reinforcement bar",
      "tag": "403B",
      "shape": "bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "4-402B",
      "shape": "bar group",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "straight bar",
      "material": "",
      "count": 1,
      "note": "Called out as 1\" diameter plain bar."
    }
  ],
  "measurements": [
    {
      "label": "reinforcement spacing",
      "value": "18\"",
      "unit": "",
      "appliesTo": "506A"
    },
    {
      "label": "horizontal dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0½\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0½\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "horizontal dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "clear cover",
      "value": "4\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "vertical dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "clear cover, 3 sides",
      "value": "1½\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "preformed joint filler thickness",
      "value": "1\"",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "concrete diaphragm thickness",
      "value": "10\"",
      "unit": "",
      "appliesTo": "concrete diaphragm"
    },
    {
      "label": "vertical dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "diaphragm section"
    },
    {
      "label": "vertical dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "diaphragm section"
    },
    {
      "label": "clear cover, typical",
      "value": "1½\"",
      "unit": "",
      "appliesTo": "diaphragm section"
    },
    {
      "label": "plain bar diameter",
      "value": "1\"",
      "unit": "",
      "appliesTo": "plain bar"
    },
    {
      "label": "sealant/joint dimension",
      "value": "¼\"",
      "unit": "",
      "appliesTo": "Detail \"A\""
    },
    {
      "label": "sealant/joint dimension",
      "value": "½\"",
      "unit": "",
      "appliesTo": "Detail \"A\""
    },
    {
      "label": "joint dimension",
      "value": "¾\"",
      "unit": "",
      "appliesTo": "Detail \"A\""
    },
    {
      "label": "radius",
      "value": "¼\"",
      "unit": "",
      "appliesTo": "Detail \"A\""
    },
    {
      "label": "scale",
      "value": "¾\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION THRU EDGE BEAM"
    },
    {
      "label": "scale",
      "value": "¾\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION THRU DIAPHRAGM"
    }
  ],
  "notes": [
    "SLAB REINFORCEMENT NOT SHOWN",
    "* 1\" PREFORMED JOINT FILLER",
    "BEARING PADS NOT SHOWN",
    "BENT 2 SHOWN",
    "BENT 3 SIMILAR",
    "SILICONE SEALANT TYPE JOINT SEALER (TYPE B, C OR D)",
    "ROUND TO 1/4\" R",
    "REQUIRED CONST. JOINT., TYP."
  ],
  "labels": [
    "℄ SR 21/MILLEN BYPASS",
    "= ℄ CONSTRUCTION",
    "= ℄ SYMMETRY",
    "℄ REQ'D. CONST. JOINT",
    "SEE DETAIL \"A\"",
    "TOP OF BEAM",
    "SECTION THRU EDGE BEAM",
    "SECTION THRU DIAPHRAGM",
    "SPAN 2",
    "DETAIL \"A\"",
    "NO SCALE"
  ],
  "description": "This crop contains a section through an edge beam for Bent 2, with Bent 3 noted similar, and a section through a concrete diaphragm at Span 2. It also includes Detail \"A\" showing the required construction-joint sealant and joint-filler arrangement, together with reinforcement callouts for the edge beam and diaphragm."
}

p09_r03 detail aSection

  • silicone sealant / type joint sealer×1joint sealant beadsiliconeShown in Detail "A"; type B, C or D.

18" reinforcement spacing8" horizontal dimension1'-0½" horizontal dimension1'-0½" horizontal dimension8" horizontal dimension4" clear cover8" vertical dimension1½" clear cover, 3 sides+14 more