Reinforcing Bar

{
  "view": "Notes",
  "objects": [
    {
      "name": "AASHTO Type II PSC beam spans",
      "tag": "",
      "shape": "",
      "material": "prestressed concrete",
      "count": 2,
      "note": "55'-0\" spans; special design."
    },
    {
      "name": "AASHTO Type III PSC beam span",
      "tag": "",
      "shape": "",
      "material": "prestressed concrete",
      "count": 1,
      "note": "82'-0\" span; special design."
    },
    {
      "name": "steel H pile end bents with MSE wall abutments",
      "tag": "",
      "shape": "H-section",
      "material": "steel",
      "count": 2,
      "note": "Special design."
    },
    {
      "name": "concrete intermediate bents",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": 2,
      "note": "Special design."
    },
    {
      "name": "end post and guardrail attachment detail",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Referenced to GA. STD. 3054 (9-30-02)."
    },
    {
      "name": "chain link wire fence",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced to GA. STD. 9031N (8-13-85)."
    },
    {
      "name": "reinforcement bar bending details",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced to GA. STD. 3901 (8-69)."
    }
  ],
  "measurements": [
    {
      "label": "quantity of AASHTO Type II PSC beam spans",
      "value": "2",
      "unit": "",
      "appliesTo": "AASHTO Type II PSC beam spans"
    },
    {
      "label": "span length",
      "value": "55'-0\"",
      "unit": "ft-in",
      "appliesTo": "AASHTO Type II PSC beam spans"
    },
    {
      "label": "quantity of AASHTO Type III PSC beam span",
      "value": "1",
      "unit": "",
      "appliesTo": "AASHTO Type III PSC beam span"
    },
    {
      "label": "span length",
      "value": "82'-0\"",
      "unit": "ft-in",
      "appliesTo": "AASHTO Type III PSC beam span"
    },
    {
      "label": "quantity of steel H pile end bents with MSE wall abutments",
      "value": "2",
      "unit": "",
      "appliesTo": "steel H pile end bents with MSE wall abutments"
    },
    {
      "label": "quantity of concrete intermediate bents",
      "value": "2",
      "unit": "",
      "appliesTo": "concrete intermediate bents"
    },
    {
      "label": "quantity of end post and guardrail attachment details",
      "value": "4",
      "unit": "",
      "appliesTo": "end post and guardrail attachment detail"
    },
    {
      "label": "length",
      "value": "4'-3\"",
      "unit": "ft-in",
      "appliesTo": "end post and guardrail attachment detail"
    },
    {
      "label": "width",
      "value": "1'-1\"",
      "unit": "ft-in",
      "appliesTo": "end post and guardrail attachment detail"
    },
    {
      "label": "height",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "end post and guardrail attachment detail"
    },
    {
      "label": "length",
      "value": "4'-6\"",
      "unit": "ft-in",
      "appliesTo": "end post and guardrail attachment detail"
    },
    {
      "label": "width",
      "value": "1'-1\"",
      "unit": "ft-in",
      "appliesTo": "end post and guardrail attachment detail"
    },
    {
      "label": "height",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "end post and guardrail attachment detail"
    }
  ],
  "notes": [
    "2 - 55'-0\" AASHTO TYPE II PSC BEAM SPANS ---------------- SPECIAL DESIGN",
    "1 - 82'-0\" AASHTO TYPE III PSC BEAM SPAN ---------------- SPECIAL DESIGN",
    "2 - STEEL H PILE END BENTS WITH MSE WALL ABUTMENTS ----------- SPECIAL DESIGN",
    "2 - CONCRETE INTERMEDIATE BENTS ------------------- SPECIAL DESIGN",
    "4 - END POST AND GUARDRAIL ATTACHMENT DETAIL -------- GA. STD. 3054 (9-30-02)",
    "(L = 4'-3\"; W = 1'-1\"; H = 3'-6\")",
    "(L = 4'-6\"; W = 1'-1\"; H = 3'-6\")",
    "BAR BENDING DETAILS ------------------------ GA. STD. 3901 (8-69)",
    "CHAIN LINK WIRE FENCE ------------------- GA. STD. 9031N (8-13-85)",
    "TYPICAL FILL DETAIL AT END OF BRIDGE ----------------GA. STD. 9037 (9-99)"
  ],
  "labels": [
    "EACH BRIDGE CONSISTS OF"
  ],
  "description": "This crop is a bridge-composition note block headed “EACH BRIDGE CONSISTS OF.” It lists the bridge span arrangement, end and intermediate bent types, end-post/guardrail details, and referenced standard details for bar bending, chain link fence, and fill at the end of bridge."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "Steel H-piles",
      "tag": "",
      "shape": "H-section",
      "material": "steel",
      "count": null,
      "note": "Specified to meet ASTM A 709 Gr 50; design data lists Grade 50, fᵧ = 50,000 PSI."
    },
    {
      "name": "Smooth dowel bars",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Placed in formed holes and grouted in place."
    },
    {
      "name": "Abutment soil reinforcing device inserts",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "At abutment; furnishing and installation cost is referenced."
    },
    {
      "name": "Superstructure",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete class and strength are listed in design data."
    },
    {
      "name": "Barrier",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete class and strength are listed in design data."
    },
    {
      "name": "PSC beams",
      "tag": "",
      "shape": "",
      "material": "prestressed concrete",
      "count": null,
      "note": "Concrete strength and allowable tension refer to beam sheets."
    },
    {
      "name": "Substructure",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete class and strength are listed in design data."
    },
    {
      "name": "Reinforcement steel",
      "tag": "",
      "shape": "",
      "material": "steel",
      "count": null,
      "note": "Grade 60 reinforcement steel is specified."
    },
    {
      "name": "Pretensioning strands",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Prestensioning strand stress is specified."
    }
  ],
  "measurements": [
    {
      "label": "Vibration monitoring notice period",
      "value": "TWO WEEKS",
      "unit": "",
      "appliesTo": "Piles"
    },
    {
      "label": "Smooth dowel bar hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "Smooth dowel bars"
    },
    {
      "label": "Smooth dowel bar hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "Smooth dowel bars"
    },
    {
      "label": "Minimum pile freeze period",
      "value": "24 HOURS",
      "unit": "",
      "appliesTo": "Steel H-piles"
    },
    {
      "label": "Seismic performance zone",
      "value": "2",
      "unit": "",
      "appliesTo": "Specifications"
    },
    {
      "label": "AS",
      "value": "0.142",
      "unit": "",
      "appliesTo": "Specifications"
    },
    {
      "label": "SDI",
      "value": "0.155",
      "unit": "",
      "appliesTo": "Specifications"
    },
    {
      "label": "Future paving allowance",
      "value": "30",
      "unit": "LBS PER SQ FT",
      "appliesTo": ""
    },
    {
      "label": "Superstructure concrete compressive strength, f′c",
      "value": "4,000",
      "unit": "PSI",
      "appliesTo": "Superstructure"
    },
    {
      "label": "Barrier concrete compressive strength, f′c",
      "value": "4,000",
      "unit": "PSI",
      "appliesTo": "Barrier"
    },
    {
      "label": "Substructure concrete compressive strength, f′c",
      "value": "3,500",
      "unit": "PSI",
      "appliesTo": "Substructure"
    },
    {
      "label": "Reinforcement steel grade",
      "value": "60",
      "unit": "",
      "appliesTo": "Reinforcement steel"
    },
    {
      "label": "Reinforcement steel yield strength, fᵧ",
      "value": "60,000",
      "unit": "PSI",
      "appliesTo": "Reinforcement steel"
    },
    {
      "label": "Pretensioning strands stress, fₛ′",
      "value": "270,000",
      "unit": "PSI",
      "appliesTo": "Pretensioning strands"
    },
    {
      "label": "Steel H-piles grade",
      "value": "50",
      "unit": "",
      "appliesTo": "Steel H-piles"
    },
    {
      "label": "Steel H-piles yield strength, fᵧ",
      "value": "50,000",
      "unit": "PSI",
      "appliesTo": "Steel H-piles"
    }
  ],
  "notes": [
    "VIBRATION MONITORING - THE PROJECT ENGINEER SHOULD CONTACT THE GEOTECHNICAL BUREAU OF THE GEORGIA DOT OFFICE OF MATERIALS AND TESTING AT GEOTECHNICAL_SUBMITTALS @DOT.GA.GOV TWO WEEKS PRIOR TO DRIVING PILES. SEE SPECIAL PROVISION 154 - CONSTRUCTION VIBRATION MONITORING.",
    "STEEL H-PILES - USE STEEL FOR H-PILES THAT MEETS THE REQUIREMENTS OF ASTM A 709 GR 50.",
    "PILE LENGTHS - ERRATIC PILE LENGTHS CAN BE EXPECTED.",
    "PILE DRIVING - SHOULD PILES FAIL TO OBTAIN DRIVING RESISTANCE AFTER ACHIEVING THE PILE TIP ELEVATIONS SHOWN, ALLOW PILES TO FREEZE A MINIMUM OF 24 HOURS AND RESTRIKE WITH A WARM HAMMER.",
    "SMOOTH DOWEL BARS - PLACE SMOOTH DOWEL BARS IN FORMED 3” DIAMETER X 12” DEEP HOLES AND GROUT IN PLACE SIMILAR TO ANCHOR BOLTS, SEE SUB-SECTION 501.3.05.B.3 OF THE GEORGIA DOT SPECIFICATIONS. STIRRUPS MAY BE SHIFTED SLIGHTLY FOR FORMED HOLES.",
    "ABUTMENT SOIL REINFORCING DEVICE INSERTS - INCLUDE THE COST OF FURNISHING AND INSTALLING INSERTS FOR SOIL REINFORCING DEVICES AT ABUTMENT IN THE OVERALL BID SUBMITTED..."
  ],
  "labels": [
    "GENERAL NOTES CONTINUED",
    "DESIGN DATA",
    "SPECIFICATIONS — AASHTO LRFD 9TH EDITION, 2020",
    "(DESIGNED FOR SEISMIC PERFORMANCE ZONE 2, AS=0.142, SDI=0.155)",
    "DESIGN VEHICLE LIVE LOAD — HL-93",
    "FUTURE PAVING ALLOWANCE",
    "CONCRETE",
    "PSC BEAM ALLOWABLE TENSION — SEE BEAM SHEETS"
  ],
  "description": "This crop contains continued general bridge construction notes and a design-data block. The notes address pile driving, vibration monitoring, smooth dowel bars, and abutment soil reinforcing device inserts; the design data gives material classes, strengths, loading criteria, and seismic design information."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "PSC beam span",
      "tag": "AASHTO TYPE II",
      "shape": "beam",
      "material": "prestressed concrete",
      "count": 2,
      "note": "55'-0\" spans; special design."
    },
    {
      "name": "PSC beam span",
      "tag": "AASHTO TYPE III",
      "shape": "beam",
      "material": "prestressed concrete",
      "count": 1,
      "note": "82'-0\" span; special design."
    },
    {
      "name": "end bent",
      "tag": "",
      "shape": "H-section pile bent",
      "material": "structural steel",
      "count": 2,
      "note": "Steel H pile end bents with MSE wall abutments; special design."
    },
    {
      "name": "MSE wall abutment",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Associated with steel H pile end bents; special design."
    },
    {
      "name": "intermediate bent",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": 2,
      "note": "Special design."
    },
    {
      "name": "end post and guardrail attachment detail",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "GA. STD. 3054 (9-30-02)."
    },
    {
      "name": "reinforcement bar bending details",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "GA. STD. 3901 (8-69)."
    },
    {
      "name": "chain link wire fence",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "GA. STD. 9031N (8-13-85)."
    },
    {
      "name": "fill at end of bridge",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Typical fill detail; GA. STD. 9037 (9-99)."
    }
  ],
  "measurements": [
    {
      "label": "PSC beam span length",
      "value": "55'-0\"",
      "unit": "",
      "appliesTo": "AASHTO TYPE II"
    },
    {
      "label": "PSC beam span length",
      "value": "82'-0\"",
      "unit": "",
      "appliesTo": "AASHTO TYPE III"
    },
    {
      "label": "Length",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "end post and guardrail attachment detail"
    },
    {
      "label": "Width",
      "value": "1'-1\"",
      "unit": "",
      "appliesTo": "end post and guardrail attachment detail"
    },
    {
      "label": "Height",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": "end post and guardrail attachment detail"
    },
    {
      "label": "Length",
      "value": "4'-6\"",
      "unit": "",
      "appliesTo": "end post and guardrail attachment detail"
    },
    {
      "label": "Width",
      "value": "1'-1\"",
      "unit": "",
      "appliesTo": "end post and guardrail attachment detail"
    },
    {
      "label": "Height",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": "end post and guardrail attachment detail"
    }
  ],
  "notes": [
    "2 - 55'-0\" AASHTO TYPE II PSC BEAM SPANS -------------------- SPECIAL DESIGN",
    "1 - 82'-0\" AASHTO TYPE III PSC BEAM SPAN --------------------- SPECIAL DESIGN",
    "2 - STEEL H PILE END BENTS WITH MSE WALL ABUTMENTS ------------ SPECIAL DESIGN",
    "2 - CONCRETE INTERMEDIATE BENTS ------------------------------- SPECIAL DESIGN",
    "4 - END POST AND GUARDRAIL ATTACHMENT DETAIL -------- GA. STD. 3054 (9-30-02)",
    "{L = 4'-3\"; W = 1'-1\"; H = 3'-6\"}",
    "{L = 4'-6\"; W = 1'-1\"; H = 3'-6\"}",
    "BAR BENDING DETAILS ----------------------------- GA. STD. 3901 (8-69)",
    "CHAIN LINK WIRE FENCE ---------------------------- GA. STD. 9031N (8-13-85)",
    "TYPICAL FILL DETAIL AT END OF BRIDGE --------------GA. STD. 9037 (9-99)"
  ],
  "labels": [
    "EACH BRIDGE CONSISTS OF",
    "SPECIAL DESIGN",
    "GA. STD. 3054 (9-30-02)",
    "GA. STD. 3901 (8-69)",
    "GA. STD. 9031N (8-13-85)",
    "GA. STD. 9037 (9-99)"
  ],
  "description": "This crop is a bridge composition note block listing the span arrangement, bents, abutments, and associated standard details for each bridge. It documents two 55'-0\" Type II PSC spans, one 82'-0\" Type III PSC span, two steel H-pile end bents with MSE wall abutments, and two concrete intermediate bents."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "steel H-piles",
      "tag": "",
      "shape": "H-section",
      "material": "structural steel",
      "count": null,
      "note": "Specified to meet ASTM A 709 Grade 50."
    },
    {
      "name": "smooth dowel bars",
      "tag": "",
      "shape": "cylindrical",
      "material": "",
      "count": null,
      "note": "Placed in formed holes and grouted in place."
    },
    {
      "name": "stirrups",
      "tag": "",
      "shape": "",
      "material": "reinforcement steel",
      "count": null,
      "note": "May be shifted slightly to clear formed holes."
    },
    {
      "name": "abutment soil reinforcing device inserts",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Note regarding furnishing and installing inserts is cut off at the bottom of the crop."
    },
    {
      "name": "PSC beams",
      "tag": "",
      "shape": "",
      "material": "prestressed concrete",
      "count": null,
      "note": "Concrete class and allowable tension are referenced to beam sheets."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Class D concrete is specified."
    },
    {
      "name": "reinforcement steel",
      "tag": "",
      "shape": "",
      "material": "steel",
      "count": null,
      "note": "Grade 60 specified."
    },
    {
      "name": "pretensioning strands",
      "tag": "",
      "shape": "",
      "material": "steel",
      "count": null,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Advance notice before driving piles",
      "value": "TWO WEEKS",
      "unit": "",
      "appliesTo": "vibration monitoring"
    },
    {
      "label": "Steel H-pile material grade",
      "value": "50",
      "unit": "",
      "appliesTo": "steel H-piles"
    },
    {
      "label": "Smooth dowel bar hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "smooth dowel bars"
    },
    {
      "label": "Smooth dowel bar hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "smooth dowel bars"
    },
    {
      "label": "Pile freeze duration",
      "value": "24",
      "unit": "HOURS",
      "appliesTo": "piles"
    },
    {
      "label": "Seismic performance zone",
      "value": "2",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "A_S",
      "value": "0.142",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "S_D",
      "value": "0.155",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Future paving allowance",
      "value": "30",
      "unit": "LBS PER SQ FT",
      "appliesTo": ""
    },
    {
      "label": "Superstructure concrete compressive strength, f'c",
      "value": "4,000",
      "unit": "PSI",
      "appliesTo": "superstructure"
    },
    {
      "label": "Barrier concrete compressive strength, f'c",
      "value": "4,000",
      "unit": "PSI",
      "appliesTo": "barrier"
    },
    {
      "label": "Substructure concrete compressive strength, f'c",
      "value": "3,500",
      "unit": "PSI",
      "appliesTo": "substructure"
    },
    {
      "label": "Reinforcement steel yield strength, f_y",
      "value": "60,000",
      "unit": "PSI",
      "appliesTo": "reinforcement steel"
    },
    {
      "label": "Pretensioning strands strength, f's",
      "value": "270,000",
      "unit": "PSI",
      "appliesTo": "pretensioning strands"
    },
    {
      "label": "Steel H-pile yield strength, f_y",
      "value": "50,000",
      "unit": "PSI",
      "appliesTo": "steel H-piles"
    }
  ],
  "notes": [
    "VIBRATION MONITORING - THE PROJECT ENGINEER SHOULD CONTACT THE GEOTECHNICAL BUREAU OF THE GEORGIA DOT OFFICE OF MATERIALS AND TESTING AT LEAST TWO WEEKS PRIOR TO DRIVING PILES. SEE GEOTECHNICAL_SUBMITTALS@DOT.GA.GOV",
    "SPECIAL PROVISION 154 - CONSTRUCTION VIBRATION MONITORING.",
    "STEEL H-PILES - USE STEEL FOR H-PILES THAT MEETS THE REQUIREMENTS OF ASTM A 709 GRADE 50.",
    "PILE LENGTHS - ERRATIC PILE LENGTHS CAN BE EXPECTED.",
    "PILE DRIVING - SHOULD PILES FAIL TO OBTAIN DRIVING RESISTANCE AFTER ACHIEVING THE PILE TIP ELEVATIONS SHOWN, ALLOW PILES TO FREEZE A MINIMUM OF 24 HOURS AND RESTRIKE WITH A WARM HAMMER.",
    "SMOOTH DOWEL BARS - PLACE SMOOTH DOWEL BARS IN FORMED 3\" DIAMETER X 12\" DEEP HOLES AND GROUT IN PLACE SIMILAR TO ANCHOR BOLTS, SEE SUB-SECTION 501.3.05.B.3 OF THE GEORGIA DOT SPECIFICATIONS. STIRRUPS MAY BE SHIFTED SLIGHTLY TO CLEAR FORMED HOLES.",
    "ABUTMENT SOIL REINFORCING DEVICE INSERTS - INCLUDE THE COST OF FURNISHING AND INSTALLING INSERTS FOR SOIL REINFORCING DEVICES AT ABUTMENT IN THE OVERALL [partial; crop cuts off]."
  ],
  "labels": [
    "GENERAL NOTES CONTINUED",
    "DESIGN DATA",
    "SPECIFICATIONS",
    "AASHTO LRFD 9TH EDITION, 2020",
    "(DESIGNED FOR SEISMIC PERFORMANCE ZONE 2, AS=0.142, SD=0.155)",
    "DESIGN VEHICLE LIVE LOAD",
    "HL-93",
    "FUTURE PAVING ALLOWANCE",
    "CONCRETE:",
    "CLASS D",
    "CLASS AAA",
    "SEE BEAM SHEETS",
    "PSC BEAM ALLOWABLE TENSION",
    "CLASS AA",
    "GRADE 60",
    "P.I. NO.",
    "0019181"
  ],
  "description": "This crop is a continuation of general construction notes and a design-data block for a bridge project. It documents pile driving and vibration-monitoring requirements, smooth dowel-bar installation, and material/design criteria for concrete, steel, prestressing strands, and piles; the final abutment insert note is cropped off."
}

{
  "view": "Table",
  "objects": [
    {
      "name": "Foundation backfill material",
      "tag": "207-0203",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Listed for left and right bridge."
    },
    {
      "name": "Bridge excavation, grade separation",
      "tag": "211-0200",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Listed for left and right bridge."
    },
    {
      "name": "Grooved concrete",
      "tag": "500-0100",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Listed for left and right bridge."
    },
    {
      "name": "Superstructure concrete",
      "tag": "500-1011",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "CL D; separately listed as BR NO - I LT (249) and BR NO - I RT (249)."
    },
    {
      "name": "Concrete barrier",
      "tag": "500-2100",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Listed for left and right bridge."
    },
    {
      "name": "Class AA concrete",
      "tag": "500-3002",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Listed for left and right bridge."
    },
    {
      "name": "PSC beams, AASHTO Type II",
      "tag": "507-9002",
      "shape": "",
      "material": "precast concrete",
      "count": null,
      "note": "BR NO - I."
    },
    {
      "name": "PSC beams, AASHTO Type III",
      "tag": "507-9003",
      "shape": "",
      "material": "precast concrete",
      "count": null,
      "note": "BR NO - I."
    },
    {
      "name": "Bar reinforcement steel",
      "tag": "511-1000",
      "shape": "bar",
      "material": "steel",
      "count": null,
      "note": "Listed for left and right bridge."
    },
    {
      "name": "Superstructure reinforcement steel",
      "tag": "511-3000",
      "shape": "bar",
      "material": "steel",
      "count": null,
      "note": "Separately listed as BR NO - I LT (69762) and BR NO - I RT (69762)."
    },
    {
      "name": "Piling in place, steel H",
      "tag": "520-1125",
      "shape": "H-section",
      "material": "steel",
      "count": null,
      "note": "Description is partially obscured after “HP”; a visible callout reads “12 X 53.”"
    },
    {
      "name": "Load test, steel H",
      "tag": "520-4125",
      "shape": "H-section",
      "material": "steel",
      "count": null,
      "note": "HP 12 X 53 (IF REQD)."
    },
    {
      "name": "Dynamic pile test",
      "tag": "523-1100",
      "shape": "",
      "material": "",
      "count": null,
      "note": ""
    },
    {
      "name": "Chain link fence",
      "tag": "643-1152",
      "shape": "",
      "material": "",
      "count": null,
      "note": "ZC COAT, 6 FT, 9 GA."
    }
  ],
  "measurements": [
    {
      "label": "Left bridge quantity, foundation backfill material",
      "value": "35",
      "unit": "CY",
      "appliesTo": "207-0203"
    },
    {
      "label": "Right bridge quantity, foundation backfill material",
      "value": "35",
      "unit": "CY",
      "appliesTo": "207-0203"
    },
    {
      "label": "Left bridge quantity, bridge excavation",
      "value": "295",
      "unit": "CY",
      "appliesTo": "211-0200"
    },
    {
      "label": "Right bridge quantity, bridge excavation",
      "value": "295",
      "unit": "CY",
      "appliesTo": "211-0200"
    },
    {
      "label": "Left bridge quantity, grooved concrete",
      "value": "811",
      "unit": "SY",
      "appliesTo": "500-0100"
    },
    {
      "label": "Right bridge quantity, grooved concrete",
      "value": "811",
      "unit": "SY",
      "appliesTo": "500-0100"
    },
    {
      "label": "Left bridge quantity, superstructure concrete",
      "value": "LUMP",
      "unit": "LS",
      "appliesTo": "500-1011"
    },
    {
      "label": "Right bridge quantity, superstructure concrete",
      "value": "LUMP",
      "unit": "LS",
      "appliesTo": "500-1011"
    },
    {
      "label": "Left bridge quantity, concrete barrier",
      "value": "378",
      "unit": "LF",
      "appliesTo": "500-2100"
    },
    {
      "label": "Right bridge quantity, concrete barrier",
      "value": "378",
      "unit": "LF",
      "appliesTo": "500-2100"
    },
    {
      "label": "Left bridge quantity, Class AA concrete",
      "value": "221",
      "unit": "CY",
      "appliesTo": "500-3002"
    },
    {
      "label": "Right bridge quantity, Class AA concrete",
      "value": "221",
      "unit": "CY",
      "appliesTo": "500-3002"
    },
    {
      "label": "Left bridge quantity, PSC beams AASHTO Type II",
      "value": "644",
      "unit": "LF",
      "appliesTo": "507-9002"
    },
    {
      "label": "Right bridge quantity, PSC beams AASHTO Type II",
      "value": "644",
      "unit": "LF",
      "appliesTo": "507-9002"
    },
    {
      "label": "Left bridge quantity, PSC beams AASHTO Type III",
      "value": "486",
      "unit": "LF",
      "appliesTo": "507-9003"
    },
    {
      "label": "Right bridge quantity, PSC beams AASHTO Type III",
      "value": "486",
      "unit": "LF",
      "appliesTo": "507-9003"
    },
    {
      "label": "Left bridge quantity, bar reinforcement steel",
      "value": "35422",
      "unit": "LB",
      "appliesTo": "511-1000"
    },
    {
      "label": "Right bridge quantity, bar reinforcement steel",
      "value": "35397",
      "unit": "LB",
      "appliesTo": "511-1000"
    },
    {
      "label": "Left bridge quantity, superstructure reinforcement steel",
      "value": "LUMP",
      "unit": "LS",
      "appliesTo": "511-3000"
    },
    {
      "label": "Right bridge quantity, superstructure reinforcement steel",
      "value": "LUMP",
      "unit": "LS",
      "appliesTo": "511-3000"
    },
    {
      "label": "Left bridge quantity, piling in place",
      "value": "2720",
      "unit": "LF",
      "appliesTo": "520-1125"
    },
    {
      "label": "Right bridge quantity, piling in place",
      "value": "2540",
      "unit": "LF",
      "appliesTo": "520-1125"
    },
    {
      "label": "Steel H pile designation",
      "value": "12 X 53",
      "unit": "",
      "appliesTo": "520-1125"
    },
    {
      "label": "Left bridge quantity, load test",
      "value": "1",
      "unit": "EA",
      "appliesTo": "520-4125"
    },
    {
      "label": "Right bridge quantity, load test",
      "value": "1",
      "unit": "EA",
      "appliesTo": "520-4125"
    },
    {
      "label": "Pile designation, load test",
      "value": "12 X 53",
      "unit": "",
      "appliesTo": "520-4125"
    },
    {
      "label": "Left bridge quantity, dynamic pile test",
      "value": "2",
      "unit": "EA",
      "appliesTo": "523-1100"
    },
    {
      "label": "Right bridge quantity, dynamic pile test",
      "value": "2",
      "unit": "EA",
      "appliesTo": "523-1100"
    },
    {
      "label": "Left bridge quantity, chain link fence",
      "value": "378",
      "unit": "LF",
      "appliesTo": "643-1152"
    },
    {
      "label": "Right bridge quantity, chain link fence",
      "value": "378",
      "unit": "LF",
      "appliesTo": "643-1152"
    },
    {
      "label": "Fence height",
      "value": "6",
      "unit": "FT",
      "appliesTo": "643-1152"
    },
    {
      "label": "Fence gauge",
      "value": "9",
      "unit": "GA",
      "appliesTo": "643-1152"
    }
  ],
  "notes": [],
  "labels": [
    "SUMMARY OF QUANTITIES",
    "PAY ITEM NUMBER",
    "LEFT BRIDGE",
    "RIGHT BRIDGE",
    "UNIT",
    "PAY ITEM"
  ],
  "description": "This crop is a Summary of Quantities table for left and right bridge work. It lists pay items, units, and quantities for excavation, concrete, barriers, PSC beams, reinforcing steel, steel H-pile work and testing, and chain link fence."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "reinforcing steel",
      "tag": "",
      "shape": "",
      "material": "steel",
      "count": null,
      "note": "Place and tie; do not weld. Maintain minimum clearance as noted."
    },
    {
      "name": "exposed concrete edges",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Chamfer all exposed edges unless otherwise noted."
    },
    {
      "name": "railroad side ditches",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Clean before construction and maintain free of silt and debris until final acceptance."
    },
    {
      "name": "protective platforms",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Provide at this site."
    },
    {
      "name": "temporary shoring",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Include cost as necessary for bridge construction in the overall bid."
    },
    {
      "name": "foundation backfill material",
      "tag": "BENTS 2",
      "shape": "",
      "material": "Type II foundation backfill material",
      "count": null,
      "note": "Place under each footing at Bents 2; use may be eliminated by the Engineer if the footing area is dry."
    },
    {
      "name": "footings",
      "tag": "BENTS 2",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Foundation backfill material is specified under each footing."
    },
    {
      "name": "piles",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Driving resistance, dynamic pile testing, and wave equation analysis are specified."
    },
    {
      "name": "bridge bents",
      "tag": "BRIDGE LEFT BENT 1 RIGHT; BRIDGE LEFT BENT 3 LEFT; BRIDGE RIGHT BENT 2 RIGHT; BRIDGE RIGHT BENT 4 RIGHT",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Dynamic pile testing is required at the listed bent locations."
    }
  ],
  "measurements": [
    {
      "label": "Georgia Standard Specifications edition",
      "value": "2021",
      "unit": "EDITION",
      "appliesTo": ""
    },
    {
      "label": "Supplemental specifications year",
      "value": "2024",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Minimum reinforcement clearance",
      "value": "2",
      "unit": "INCH",
      "appliesTo": "reinforcing steel"
    },
    {
      "label": "Chamfer size",
      "value": "3/4\"",
      "unit": "",
      "appliesTo": "exposed concrete edges"
    },
    {
      "label": "Foundation backfill thickness",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "foundation backfill material"
    },
    {
      "label": "Foundation footing plan-dimension addition",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "foundation backfill material"
    },
    {
      "label": "Notification/submittal period before driving piles",
      "value": "TWO",
      "unit": "WEEKS",
      "appliesTo": "piles"
    }
  ],
  "notes": [
    "SPECIFICATIONS - GEORGIA STANDARD SPECIFICATIONS, 2021 EDITION, AND 2024 SUPPLEMENTAL SPECIFICATIONS AS MODIFIED BY CONTRACT DOCUMENTS.",
    "REINFORCING STEEL - PLACE AND TIE ALL REINFORCING STEEL IN ACCORDANCE WITH THE GEORGIA DOT SPECIFICATIONS. DO NOT WELD REINFORCING STEEL. MAINTAIN 2 INCH MINIMUM CLEARANCE ON ALL REINFORCEMENT UNLESS OTHERWISE NOTED.",
    "CHAMFER - CHAMFER ALL EXPOSED CONCRETE EDGES 3/4\" UNLESS OTHERWISE NOTED.",
    "RAILROAD SIDE DITCHES - PRIOR TO THE BEGINNING OF CONSTRUCTION, CLEAN THE RAILROAD SIDE DITCHES IN THE CONSTRUCTION AREA IN SUCH A MANNER AS TO PROVIDE POSITIVE DRAINAGE. MAINTAIN THE RAILROAD SIDE DITCHES FREE OF SILT AND DEBRIS UNTIL FINAL ACCEPTANCE. SEE ROADWAY PLANS FOR EROSION CONTROL AND PAYMENT.",
    "PROTECTIVE PLATFORMS - PROVIDE PROTECTIVE PLATFORMS AT THIS SITE, SEE SECTION 510 OF THE GEORGIA DOT SPECIFICATIONS. MAINTAIN A MINIMUM VERTICAL CLEARANCE AS DEFINED IN THE CONSTRUCTION CLEARANCE DIAGRAM.",
    "TEMPORARY SHORING - INCLUDE THE COST OF TEMPORARY SHORING AS NECESSARY FOR BRIDGE CONSTRUCTION IN THE OVERALL BID SUBMITTED.",
    "WAITING PERIOD - NONE REQUIRED.",
    "FOUNDATION BACKFILL MATERIAL - PLACE 1'-0\" OF TYPE II FOUNDATION BACKFILL MATERIAL UNDER EACH FOOTING AT BENTS 2, AND. THE QUANTITY IS BASED ON THE PLAN FOOTING DIMENSIONS PLUS 2'-0\" . USE OF THIS MATERIAL MAY BE ELIMINATED BY THE ENGINEER IF THE FOOTING AREA IS DRY.",
    "PLAN DRIVING OBJECTIVE - SEE SUBSTRUCTURE DETAILS.",
    "DRIVING RESISTANCE - DETERMINE DRIVING RESISTANCE FOR PILES USING DYNAMIC PILE TESTING IN ACCORDANCE WITH SUB-SECTION 520.3.05.D.2 OF THE GEORGIA DOT SPECIFICATIONS. DYNAMIC PILE TESTING SHALL BE REQUIRED AT BRIDGE LEFT BENT 1 RIGHT, BRIDGE LEFT BENT 3 LEFT, BRIDGE RIGHT BENT 2 RIGHT AND BRIDGE RIGHT BENT 4 RIGHT.",
    "DYNAMIC PILE TESTING - PERFORM PILE TESTING USING THE PILE DRIVING ANALYZER (PDA) IN ACCORDANCE WITH SPECIAL PROVISION SECTION 523. NOTIFY THE GEOTECHNICAL BUREAU OF THE GEORGIA DOT OFFICE OF MATERIALS AND TESTING AT GEOTECHNICAL_SUBMITTALS@DOT.GA.GOV TWO WEEKS PRIOR TO DRIVING PILES. SUBMIT ALL FILES REQUIRED BY SPECIAL PROVISION TO THE EMAIL ABOVE FOR REVIEW AND APPROVAL.",
    "WAVE EQUATION - PERFORM WAVE EQUATION ANALYSIS (WEAP) IN ACCORDANCE WITH SUB-SECTION 520.3.05.D.2 OF THE GEORGIA DOT SPECIFICATION. PROVIDE RESULTS OF THE WEAP TO THE GEOTECHNICAL BUREAU OF THE GEORGIA DOT OFFICE OF MATERIALS AND TESTING AT GEOTECHNICAL_SUBMITTALS@DOT.GA.GOV FOR REVIEW AND APPROVAL TWO WEEKS PRIOR TO DRIVING PILES."
  ],
  "labels": [
    "GENERAL NOTES"
  ],
  "description": "This crop is a General Notes block for bridge construction. It documents specification requirements, reinforcement and concrete edge treatment, drainage and protective-platform requirements, footing backfill, shoring, and pile-driving/testing requirements."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "reinforcing steel",
      "tag": "",
      "shape": "",
      "material": "steel",
      "count": null,
      "note": "Place and tie; welding is prohibited."
    },
    {
      "name": "exposed concrete edges",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Chamfer required unless otherwise noted."
    },
    {
      "name": "railroad side ditches",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Clean before construction and maintain free of silt and debris until final acceptance."
    },
    {
      "name": "protective platforms",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Provide at this site."
    },
    {
      "name": "temporary shoring",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Include cost as necessary for bridge construction in the overall bid."
    },
    {
      "name": "foundation backfill material",
      "tag": "TYPE II",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Place under each footing at Bents 2 and 3."
    },
    {
      "name": "footings",
      "tag": "BENTS 2 AND 3",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Foundation backfill material is specified beneath each footing."
    },
    {
      "name": "piles",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Driving resistance, dynamic pile testing, and wave equation analysis are specified."
    }
  ],
  "measurements": [
    {
      "label": "Georgia Standard Specifications edition",
      "value": "2021",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Supplemental specifications year",
      "value": "2024",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "minimum reinforcement clearance",
      "value": "2",
      "unit": "INCH",
      "appliesTo": "reinforcing steel"
    },
    {
      "label": "concrete edge chamfer",
      "value": "3/4”",
      "unit": "",
      "appliesTo": "exposed concrete edges"
    },
    {
      "label": "foundation backfill thickness",
      "value": "1’-0”",
      "unit": "",
      "appliesTo": "TYPE II foundation backfill material"
    },
    {
      "label": "foundation backfill plan footing dimension addition",
      "value": "2’-0”",
      "unit": "",
      "appliesTo": "TYPE II foundation backfill material"
    },
    {
      "label": "Georgia DOT Specifications section",
      "value": "510",
      "unit": "",
      "appliesTo": "protective platforms"
    },
    {
      "label": "Georgia DOT Specifications sub-section",
      "value": "520.3.05.D.2",
      "unit": "",
      "appliesTo": "piles"
    },
    {
      "label": "Special Provision section",
      "value": "523",
      "unit": "",
      "appliesTo": "dynamic pile testing"
    },
    {
      "label": "notice/submittal period",
      "value": "TWO WEEKS",
      "unit": "",
      "appliesTo": "dynamic pile testing"
    },
    {
      "label": "Georgia DOT Specifications sub-section",
      "value": "520.3.05.D.2",
      "unit": "",
      "appliesTo": "wave equation analysis"
    },
    {
      "label": "review and approval submittal period",
      "value": "TWO WEEKS",
      "unit": "",
      "appliesTo": "wave equation analysis"
    }
  ],
  "notes": [
    "SPECIFICATIONS - GEORGIA STANDARD SPECIFICATIONS, 2021 EDITION, AND 2024 SUPPLEMENTAL SPECIFICATIONS AS MODIFIED BY CONTRACT DOCUMENTS.",
    "REINFORCING STEEL - PLACE AND TIE ALL REINFORCING STEEL IN ACCORDANCE WITH THE GEORGIA DOT SPECIFICATIONS. DO NOT WELD REINFORCING STEEL. MAINTAIN 2 INCH MINIMUM CLEARANCE ON ALL REINFORCEMENT UNLESS OTHERWISE NOTED.",
    "CHAMFER - CHAMFER ALL EXPOSED CONCRETE EDGES 3/4” UNLESS OTHERWISE NOTED.",
    "RAILROAD SIDE DITCHES - PRIOR TO THE BEGINNING OF CONSTRUCTION, CLEAN THE RAILROAD SIDE DITCHES IN THE CONSTRUCTION AREA IN SUCH A MANNER AS TO PROVIDE POSITIVE DRAINAGE. MAINTAIN THE RAILROAD SIDE DITCHES FREE OF SILT AND DEBRIS UNTIL FINAL ACCEPTANCE. SEE ROADWAY PLANS FOR EROSION CONTROL AND PAYMENT.",
    "PROTECTIVE PLATFORMS - PROVIDE PROTECTIVE PLATFORMS AT THIS SITE, SEE SECTION 510 OF THE GEORGIA DOT SPECIFICATIONS. MAINTAIN A MINIMUM VERTICAL CLEARANCE AS DEFINED IN THE CONSTRUCTION CLEARANCE DIAGRAM.",
    "TEMPORARY SHORING - INCLUDE THE COST OF TEMPORARY SHORING AS NECESSARY FOR BRIDGE CONSTRUCTION IN THE OVERALL BID SUBMITTED.",
    "WAITING PERIOD - NONE REQUIRED.",
    "FOUNDATION BACKFILL MATERIAL - PLACE 1’-0” OF TYPE II FOUNDATION BACKFILL MATERIAL UNDER EACH FOOTING AT BENTS 2, AND 3. THE QUANTITY IS BASED ON THE PLAN FOOTING DIMENSIONS PLUS 2’-0”. USE OF THIS MATERIAL MAY BE ELIMINATED BY THE ENGINEER IF THE FOOTING AREA IS DRY.",
    "PLAN DRIVING OBJECTIVE - SEE SUBSTRUCTURE DETAILS.",
    "DRIVING RESISTANCE - DETERMINE DRIVING RESISTANCE FOR PILES USING DYNAMIC PILE TESTING IN ACCORDANCE WITH SUB-SECTION 520.3.05.D.2 OF THE GEORGIA DOT SPECIFICATIONS. DYNAMIC PILE TESTING SHALL BE REQUIRED AT BRIDGE LEFT BENT 1 RIGHT, BRIDGE LEFT BENT 3 LEFT, BRIDGE RIGHT BENT 2 RIGHT AND BRIDGE RIGHT BENT 4 RIGHT.",
    "DYNAMIC PILE TESTING - PERFORM PILE TESTING USING THE PILE DRIVING ANALYZER (PDA) IN ACCORDANCE WITH SPECIAL PROVISION SECTION 523. NOTIFY THE GEOTECHNICAL BUREAU OF THE GEORGIA DOT OFFICE OF MATERIALS AND TESTING AT GEOTECHNICAL_SUBMITTALS@DOT.GA.GOV TWO WEEKS PRIOR TO DRIVING PILES. SUBMIT ALL FILES REQUIRED BY SPECIAL PROVISION TO THE EMAIL ABOVE FOR REVIEW AND APPROVAL.",
    "WAVE EQUATION - PERFORM WAVE EQUATION ANALYSIS (WEAP) IN ACCORDANCE WITH SUB-SECTION 520.3.05.D.2 OF THE GEORGIA DOT SPECIFICATION. PROVIDE RESULTS OF THE WEAP TO THE GEOTECHNICAL BUREAU OF THE GEORGIA DOT OFFICE OF MATERIALS AND TESTING AT GEOTECHNICAL_SUBMITTALS@DOT.GA.GOV FOR REVIEW AND APPROVAL TWO WEEKS PRIOR TO DRIVING PILES."
  ],
  "labels": [
    "GENERAL NOTES"
  ],
  "description": "This crop is a General Notes block for bridge construction. It documents general specifications, reinforcement and concrete requirements, railroad drainage, protective platforms, shoring, footing backfill, and pile-driving/testing requirements."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "diaphragm",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Location referenced to beam sheets."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Barrier and fence post dimensions are measured along inside face of barrier; expansion joints noted in barrier."
    },
    {
      "name": "fence post",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Dimensions measured along inside face of barrier."
    },
    {
      "name": "expansion joint",
      "tag": "*",
      "shape": "",
      "material": "",
      "count": null,
      "note": "1” expansion joint in barrier."
    },
    {
      "name": "expansion joint",
      "tag": "**",
      "shape": "",
      "material": "",
      "count": null,
      "note": "1” expansion joint in barrier and required construction joint in deck."
    },
    {
      "name": "construction joint",
      "tag": "**",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Required in deck."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Top of slab over intermediate bents 2 and 3."
    },
    {
      "name": "reinforcement bar",
      "tag": "600",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Between each pair of 400 bars in top of slab over intermediate bents 2 and 3."
    },
    {
      "name": "reinforcement bar",
      "tag": "400",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced as pairs in top of slab."
    },
    {
      "name": "intermediate bent",
      "tag": "2 and 3",
      "shape": "",
      "material": "",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Expansion joint width",
      "value": "1”",
      "unit": "",
      "appliesTo": "*"
    },
    {
      "label": "Expansion joint width",
      "value": "1”",
      "unit": "",
      "appliesTo": "**"
    },
    {
      "label": "Reinforcement bar quantity",
      "value": "2-600",
      "unit": "",
      "appliesTo": "600"
    },
    {
      "label": "Reinforcement bar length",
      "value": "10’-0” LONG",
      "unit": "",
      "appliesTo": "600"
    }
  ],
  "notes": [
    "1. SEE BEAM SHEETS FOR DIAPHRAGM LOCATION.",
    "2. BARRIER AND FENCE POST DIMENSIONS ARE MEASURED ALONG INSIDE FACE OF BARRIER.",
    "* 3. [symbol] 1” EXPANSION JOINT IN BARRIER.",
    "** 4. [symbol] 1” EXPANSION JOINT IN BARRIER AND REQUIRED CONSTRUCTION JOINT IN DECK.",
    "ⓘ 5. 2-600 (10’-0” LONG) BETWEEN EACH PAIR OF 400 BARS IN TOP OF SLAB OVER INTERMEDIATE BENTS 2 AND 3."
  ],
  "labels": [
    "NOTES:"
  ],
  "description": "This crop is a notes block for bridge work. It provides diaphragm-location reference, barrier and fence-post dimensioning guidance, expansion/construction-joint requirements, and top-slab reinforcing information at intermediate bents 2 and 3."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "Diaphragm",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Location referenced on beam sheets."
    },
    {
      "name": "Barrier",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Includes noted expansion joints; dimensions measured along inside face."
    },
    {
      "name": "Fence post",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Dimensions measured along inside face of barrier."
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "1” expansion joint noted in barrier; one note also requires a construction joint in deck."
    },
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Top of slab over intermediate bents 2 and 3 is referenced."
    },
    {
      "name": "Intermediate bent",
      "tag": "2 and 3",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Referenced in slab reinforcement note."
    },
    {
      "name": "400 bars",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Pairs of bars referenced in top-of-slab note."
    },
    {
      "name": "600 bars",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Shown as 2-600, 10'-0” long, between each pair of 400 bars."
    }
  ],
  "measurements": [
    {
      "label": "Expansion joint width",
      "value": "1”",
      "unit": "",
      "appliesTo": "Barrier"
    },
    {
      "label": "Bar length",
      "value": "10'-0”",
      "unit": "",
      "appliesTo": "600 bars"
    },
    {
      "label": "Bar quantity/designation",
      "value": "2-600",
      "unit": "",
      "appliesTo": "600 bars"
    }
  ],
  "notes": [
    "1. SEE BEAM SHEETS FOR DIAPHRAGM LOCATION.",
    "2. BARRIER AND FENCE POST DIMENSIONS ARE MEASURED ALONG INSIDE FACE OF BARRIER.",
    "* 3. [symbol] 1” EXPANSION JOINT IN BARRIER.",
    "** 4. [symbol] 1” EXPANSION JOINT IN BARRIER AND REQUIRED CONSTRUCTION JOINT IN DECK.",
    "ⓧ 5. 2-600 (10'-0” LONG) BETWEEN EACH PAIR OF 400 BARS IN TOP OF SLAB OVER INTERMEDIATE BENTS 2 AND 3."
  ],
  "labels": [
    "NOTES:"
  ],
  "description": "This crop is a bridge drawing notes block. It gives diaphragm-location, barrier and fence-post dimensioning, barrier expansion-joint, deck construction-joint, and top-of-slab reinforcement notes over intermediate bents 2 and 3."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "trapezoidal in plan",
      "material": "",
      "count": 2,
      "note": "Two adjacent deck-plan footprints are shown."
    },
    {
      "name": "beam",
      "tag": "℄ BEAM 1–℄ BEAM 12",
      "shape": "rectangular in plan",
      "material": "",
      "count": 12,
      "note": "Beams 1 through 6 are shown in the upper deck footprint and Beams 7 through 12 in the lower footprint."
    },
    {
      "name": "endwall",
      "tag": "",
      "shape": "rectangular in plan",
      "material": "",
      "count": 2,
      "note": "Called out as 3'-0\" endwall outside exterior beam, typical."
    },
    {
      "name": "endwall",
      "tag": "",
      "shape": "rectangular in plan",
      "material": "",
      "count": 2,
      "note": "Called out as 1'-6\" endwall."
    },
    {
      "name": "edgebeam",
      "tag": "",
      "shape": "tapered in plan",
      "material": "",
      "count": 4,
      "note": "Called out as 1'-0\" EDGEBEAM, TYP."
    },
    {
      "name": "concrete diaphragm",
      "tag": "",
      "shape": "rectangular in plan",
      "material": "concrete",
      "count": null,
      "note": "Called out as 10\" CONCRETE DIAPHRAGM, TYP."
    },
    {
      "name": "paving rest",
      "tag": "",
      "shape": "rectangular in plan",
      "material": "",
      "count": 2,
      "note": "Called out as 12\" PAVING REST."
    },
    {
      "name": "reinforcement bar",
      "tag": "400A",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "400A is called out once in each deck footprint."
    },
    {
      "name": "fence post",
      "tag": "",
      "shape": "circular symbol in plan",
      "material": "",
      "count": null,
      "note": "Posts are shown along the deck edges with fence post spacing dimensions."
    },
    {
      "name": "end post",
      "tag": "END POST",
      "shape": "circular symbol in plan",
      "material": "",
      "count": 2,
      "note": "One end post is called out at each left-side end."
    }
  ],
  "measurements": [
    {
      "label": "overall deck width",
      "value": "55'-0\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "deck width division",
      "value": "18'-4\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "fence post spacing",
      "value": "9'-6\"",
      "unit": "",
      "appliesTo": "fence post"
    },
    {
      "label": "fence post spacing",
      "value": "6'-6\"",
      "unit": "",
      "appliesTo": "fence post"
    },
    {
      "label": "offset",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "deck edge dimension",
      "value": "1'-9½\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "endwall outside exterior beam",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "fillet",
      "value": "8\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "bearing angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "concrete diaphragm thickness",
      "value": "10\"",
      "unit": "",
      "appliesTo": "concrete diaphragm"
    },
    {
      "label": "paving rest",
      "value": "12\"",
      "unit": "",
      "appliesTo": "paving rest"
    },
    {
      "label": "endwall",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "edgebeam",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "edgebeam"
    },
    {
      "label": "gutter to gutter",
      "value": "40'-0\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "out to out",
      "value": "43'-7\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "dimension at marked locations",
      "value": "5'-0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "end post offset",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "END POST"
    },
    {
      "label": "fence post spacing",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "fence post"
    },
    {
      "label": "fence post spacing",
      "value": "8'-0\"",
      "unit": "",
      "appliesTo": "fence post"
    },
    {
      "label": "fence post spacing",
      "value": "6'-8 13/16\"",
      "unit": "",
      "appliesTo": "fence post"
    },
    {
      "label": "deck dimension",
      "value": "17'-4 5/16\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "deck dimension",
      "value": "17'-5 1/4\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "deck dimension",
      "value": "52'-2 13/16\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "span length",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "deck dimension",
      "value": "51'-8 3/8\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "deck dimension",
      "value": "17'-2 13/16\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "deck dimension",
      "value": "17'-2 3/4\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "end post offset",
      "value": "4'-6\"",
      "unit": "",
      "appliesTo": "END POST"
    },
    {
      "label": "fence post spacing",
      "value": "6'-2 3/8\"",
      "unit": "",
      "appliesTo": "fence post"
    },
    {
      "label": "bearing",
      "value": "N 83°-43'-21.7\" E",
      "unit": "",
      "appliesTo": "CONSTRUCTION ℄ SR 21"
    }
  ],
  "notes": [
    "3'-0\" ENDWALL OUTSIDE EXTERIOR BEAM, TYP.",
    "8\" FILLET, TYP.",
    "12\" PAVING REST",
    "1'-6\" ENDWALL",
    "1'-0\" EDGEBEAM, TYP.",
    "10\" CONCRETE DIAPHRAGM, TYP.",
    "FENCE POST SPACING"
  ],
  "labels": [
    "I2-502A",
    "I2-502B",
    "I2-502C",
    "B.F.P.R. BENT 1",
    "PGL WESTBOUND",
    "PGL EASTBOUND",
    "CONSTRUCTION ℄ SR 21",
    "SPAN I",
    "DECK PLAN"
  ],
  "description": "This crop is the SPAN I DECK PLAN. It shows two adjacent trapezoidal deck footprints crossing CONSTRUCTION ℄ SR 21, with twelve numbered beams, endwalls, edgebeams, paving rests, concrete diaphragms, reinforcement callout 400A, and fence-post layout dimensions. PGL WESTBOUND and PGL EASTBOUND are identified within the respective deck-plan areas."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "bridge deck slab",
      "tag": "SPAN 2",
      "shape": "two skewed rectangular deck panels",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown as the westbound and eastbound deck portions separated by Construction ℄ SR 21."
    },
    {
      "name": "beam centerline",
      "tag": "℄ BEAM 1 through ℄ BEAM 12",
      "shape": "parallel longitudinal lines",
      "material": "",
      "count": 12,
      "note": "Beam centerlines 1-6 are shown in the upper deck portion and 7-12 in the lower deck portion."
    },
    {
      "name": "edge beam",
      "tag": "",
      "shape": "longitudinal edge beam",
      "material": "",
      "count": 4,
      "note": "Called out as 1'-0\" EDGEBEAM, TYP. at the outside edges."
    },
    {
      "name": "concrete diaphragm",
      "tag": "",
      "shape": "transverse rectangular diaphragm",
      "material": "concrete",
      "count": null,
      "note": "Called out as 10\" CONCRETE DIAPHRAGM, TYP."
    },
    {
      "name": "fence post",
      "tag": "",
      "shape": "post locations along deck edge",
      "material": "",
      "count": null,
      "note": "Post locations and spacing are shown along the deck edges."
    },
    {
      "name": "reinforcement bar",
      "tag": "12-502D",
      "shape": "bar",
      "material": "reinforcing steel",
      "count": null,
      "note": "Repeated deck reinforcement callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "12-502E",
      "shape": "bar",
      "material": "reinforcing steel",
      "count": null,
      "note": "Deck reinforcement callout at the right-side portions."
    },
    {
      "name": "reinforcement bar",
      "tag": "400B",
      "shape": "bar",
      "material": "reinforcing steel",
      "count": null,
      "note": "Reinforcement callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "400C",
      "shape": "bar",
      "material": "reinforcing steel",
      "count": null,
      "note": "Reinforcement callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "500B",
      "shape": "bent bar",
      "material": "reinforcing steel",
      "count": null,
      "note": "Shown in the bar bending detail at skew."
    }
  ],
  "measurements": [
    {
      "label": "overall deck length",
      "value": "82'-0\"",
      "unit": "",
      "appliesTo": "SPAN 2 deck portions"
    },
    {
      "label": "deck longitudinal segment length",
      "value": "16'-4½\"",
      "unit": "",
      "appliesTo": "SPAN 2 deck portions; repeated"
    },
    {
      "label": "deck end segment length",
      "value": "16'-6\"",
      "unit": "",
      "appliesTo": "SPAN 2 deck portions"
    },
    {
      "label": "fence post spacing",
      "value": "9'-6\"",
      "unit": "",
      "appliesTo": "fence posts"
    },
    {
      "label": "fence post spacing",
      "value": "9'-10½\"",
      "unit": "",
      "appliesTo": "fence posts"
    },
    {
      "label": "end offset",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "fence post spacing at deck ends"
    },
    {
      "label": "end offset",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "fence post spacing at construction-joint-side deck ends"
    },
    {
      "label": "edgebeam width",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "edge beam"
    },
    {
      "label": "fillet size",
      "value": "8\"",
      "unit": "",
      "appliesTo": "fillet"
    },
    {
      "label": "concrete diaphragm thickness",
      "value": "10\"",
      "unit": "",
      "appliesTo": "concrete diaphragm"
    },
    {
      "label": "minimum lap",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "reinforcement"
    },
    {
      "label": "dimension at marked locations",
      "value": "5'-0\"",
      "unit": "",
      "appliesTo": "marked locations near right deck edges"
    },
    {
      "label": "gutter width",
      "value": "1'-9½\"",
      "unit": "",
      "appliesTo": "gutter"
    },
    {
      "label": "gutter-to-gutter width",
      "value": "40'-0\"",
      "unit": "",
      "appliesTo": "deck portion"
    },
    {
      "label": "out-to-out width",
      "value": "43'-7\"",
      "unit": "",
      "appliesTo": "deck portion"
    },
    {
      "label": "out-to-out width",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "shown deck dimension"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "deck skew; TYP. where noted"
    },
    {
      "label": "bearing/construction-joint direction",
      "value": "N 83°-43'-21.7\" E.",
      "unit": "",
      "appliesTo": "construction line"
    }
  ],
  "notes": [
    "BARS ARE DETAILED IN BAR DETAILS AS EQUIV. FULL LENGTH BARS.",
    "* SEE SUBSECTION 511.3.05.G.5 OF THE GEORGIA SPECIFICATION FOR PLACEMENT OF 500B BAR."
  ],
  "labels": [
    "SPAN 2",
    "DECK PLAN",
    "CONSTRUCTION ℄ SR 21",
    "PGL WESTBOUND",
    "PGL EASTBOUND",
    "FENCE POST SPACING",
    "GUTTER TO GUTTER",
    "OUT TO OUT",
    "B.F.P.R. OR CONST. JOINT",
    "MAIN SLAB REINF.",
    "AT B.F.P.R. OR CONST. JOINT",
    "BAR BENDING DETAILS AT SKEW",
    "NO SCALE"
  ],
  "description": "This crop is a deck plan for Span 2, showing two skewed deck portions with beam centerlines 1 through 12, edge beams, diaphragms, fence-post layout, and deck reinforcement callouts. A bar bending detail at skew is included at the upper right for the B.F.P.R. or construction joint."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "main slab reinforcement bars",
      "tag": "500B",
      "shape": "bent bars at skewed joint",
      "material": "reinforcing steel",
      "count": 5,
      "note": "Bars are shown bending at the B.F.P.R. or construction joint."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "skewed linear joint",
      "material": "",
      "count": 1,
      "note": "Identified as B.F.P.R. or construction joint."
    }
  ],
  "measurements": [
    {
      "label": "clear",
      "value": "2\"",
      "unit": "",
      "appliesTo": "B.F.P.R. or construction joint"
    },
    {
      "label": "chamfer",
      "value": "3/4\"",
      "unit": "",
      "appliesTo": ""
    }
  ],
  "notes": [
    "BARS ARE DETAILED IN BAR DETAILS AS EQUIVALENT FULL LENGTH BARS.",
    "*SEE SUBSECTION 511.3.05.G.5 OF THE GEORGIA DOT SPECIFICATION FOR PLACEMENT OF 500B BAR."
  ],
  "labels": [
    "B.F.P.R. OR CONST. JOINT",
    "MAIN SLAB REINF.",
    "AT B.F.P.R. OR CONST. JOINT",
    "℄ BRIDGE",
    "3/4\" CHAMFER",
    "LOW MODULUS SEALANT (TYPE partial)",
    "BAR BENDING DETAILS AT SKEWED JOINTS",
    "NO SCALE"
  ],
  "description": "This crop shows a bar bending detail for main slab reinforcement at a skewed B.F.P.R. or construction joint. Five 500B reinforcement bars are diagrammatically shown bending along the skewed joint; accompanying notes direct that the bars are detailed as equivalent full-length bars and reference Georgia DOT placement requirements."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "beam",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced for diaphragm location."
    },
    {
      "name": "diaphragm",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Location referenced on beam sheets."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Barrier dimensions and expansion joints are noted."
    },
    {
      "name": "fence post",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Dimensions are measured along inside face of barrier."
    },
    {
      "name": "expansion joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced in barrier."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Required in deck."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Top of slab referenced."
    },
    {
      "name": "intermediate bent",
      "tag": "2 and 3",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Referenced as intermediate bents."
    },
    {
      "name": "reinforcement bars",
      "tag": "600",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Between each pair of 400 bars in top of slab over intermediate bents 2 and 3."
    },
    {
      "name": "reinforcement bars",
      "tag": "400",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Referenced as pairs."
    }
  ],
  "measurements": [
    {
      "label": "Expansion joint in barrier",
      "value": "1″",
      "unit": "",
      "appliesTo": "barrier"
    },
    {
      "label": "Expansion joint in barrier",
      "value": "1″",
      "unit": "",
      "appliesTo": "barrier"
    },
    {
      "label": "600 bars length",
      "value": "10′-0″",
      "unit": "",
      "appliesTo": "600"
    },
    {
      "label": "600 bars quantity",
      "value": "2-600",
      "unit": "",
      "appliesTo": "600"
    }
  ],
  "notes": [
    "1. SEE BEAM SHEETS FOR DIAPHRAGM LOCATION.",
    "2. BARRIER AND FENCE POST DIMENSIONS ARE MEASURED ALONG INSIDE FACE OF BARRIER.",
    "* 3. ℄ 1″ EXPANSION JOINT IN BARRIER.",
    "** 4. ℄ 1″ EXPANSION JOINT IN BARRIER AND REQUIRED CONSTRUCTION JOINT IN DECK.",
    "ⓐ 5. 2-600 (10′-0″ LONG) BETWEEN EACH PAIR OF 400 BARS IN TOP OF SLAB OVER INTERMEDIATE BENTS 2 AND 3.",
    "ⓑ 6. LAP IN BARS SHALL BE STAGGERED AND ALTERNATED TO MAXIMIZE THE DISTANCE BETWEEN ADJACENT SPLICES."
  ],
  "labels": [
    "NOTES:"
  ],
  "description": "This crop is a notes block from a bridge drawing. It gives diaphragm-reference, barrier and fence-post dimensioning, barrier/deck joint, slab reinforcement, and reinforcement lap requirements."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "beam",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced as “BEAM SHEETS” for diaphragm location."
    },
    {
      "name": "diaphragm",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Location is referenced to beam sheets."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Notes address barrier dimensions and expansion joints."
    },
    {
      "name": "fence post",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Dimensions are measured along the inside face of barrier."
    },
    {
      "name": "expansion joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Specified in barrier in Notes 3 and 4."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Required in deck per Note 4."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Top of slab is referenced over intermediate bents 2 and 3."
    },
    {
      "name": "intermediate bent",
      "tag": "2 AND 3",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Referenced in Note 5 only."
    },
    {
      "name": "reinforcement bars",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Bar designations/quantities are partially unclear in Note 5; lap splices are addressed in Note 6."
    }
  ],
  "measurements": [
    {
      "label": "expansion joint width",
      "value": "½\"",
      "unit": "",
      "appliesTo": "barrier; Note 3"
    },
    {
      "label": "expansion joint width",
      "value": "½\"",
      "unit": "",
      "appliesTo": "barrier; Note 4"
    },
    {
      "label": "bar length",
      "value": "10'-0\"",
      "unit": "",
      "appliesTo": "reinforcement bars; Note 5"
    },
    {
      "label": "reinforcement notation/quantity as printed",
      "value": "2-600",
      "unit": "",
      "appliesTo": "reinforcement bars; Note 5"
    },
    {
      "label": "bar notation/quantity as printed",
      "value": "400",
      "unit": "",
      "appliesTo": "reinforcement bars; Note 5"
    }
  ],
  "notes": [
    "1. SEE BEAM SHEETS FOR DIAPHRAGM LOCATION.",
    "2. BARRIER AND FENCE POST DIMENSIONS ARE MEASURED ALONG INSIDE FACE OF BARRIER.",
    "* 3. ½\" EXPANSION JOINT IN BARRIER.",
    "** 4. ½\" EXPANSION JOINT IN BARRIER AND REQUIRED CONSTRUCTION JOINT IN DECK.",
    "[circled *] 5. 2-600 (10'-0\" LONG) BETWEEN EACH PAIR OF 400 BARS IN TOP OF SLAB OVER INTERMEDIATE BENTS 2 AND 3.",
    "[two circled *] 6. LAP IN BARS SHALL BE STAGGERED AND ALTERNATED TO MAXIMIZE THE DISTANCE BETWEEN ADJACENT SPLICES."
  ],
  "labels": [
    "NOTES"
  ],
  "description": "This crop is a notes block containing six general bridge construction notes. It documents diaphragm-location referencing, barrier and fence-post dimensioning, barrier/deck joint requirements, and reinforcement placement and lap-splice requirements over intermediate bents 2 and 3."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "main slab reinforcement bars",
      "tag": "*500B",
      "shape": "bent bars",
      "material": "steel reinforcement",
      "count": 5,
      "note": "Bars shown terminating/bending at skewed joint."
    },
    {
      "name": "construction joint",
      "tag": "B.F.P.R. OR CONST. JOINT",
      "shape": "skewed diagonal joint line",
      "material": "",
      "count": 1,
      "note": "Shown through main slab reinforcement detail."
    },
    {
      "name": "chamfer",
      "tag": "",
      "shape": "chamfered edge",
      "material": "",
      "count": null,
      "note": "Callout is partially cropped."
    },
    {
      "name": "low modulus sealant",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Callout text is partially cropped."
    }
  ],
  "measurements": [
    {
      "label": "clearance",
      "value": "2\"",
      "unit": "",
      "appliesTo": "main slab reinforcement bars"
    },
    {
      "label": "chamfer",
      "value": "3/4\"",
      "unit": "",
      "appliesTo": "chamfer"
    }
  ],
  "notes": [
    "BARS ARE DETAILED IN BAR DETAILS AS EQUIVALENT FULL LENGTH BARS.",
    "* SEE SUBSECTION 511.3.05.G.5 OF THE GEORGIA DOT SPECIFICATION FOR PLACEMENT OF 500B BAR.",
    "LOW MODULUS SIL[partial] SEALANT (TYPE A[partial]"
  ],
  "labels": [
    "MAIN SLAB REINF.",
    "B.F.P.R. OR CONST. JOINT",
    "AT B.F.P.R. OR CONST. JOINT",
    "⊥ ℄ BRIDGE",
    "BAR BENDING DETAILS AT SKEWED JOINTS",
    "NO SCALE"
  ],
  "description": "This crop shows a bar-bending detail for main slab reinforcement at a skewed B.F.P.R. or construction joint. Five bent reinforcement bars are depicted adjacent to the diagonal joint, with a 2 inch clear dimension and notes referring to equivalent full-length bar detailing and placement of the 500B bar."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Bridge deck slab",
      "tag": "SPAN 2",
      "shape": "skewed rectangular",
      "material": "",
      "count": 2,
      "note": "Two separated deck-plan portions are shown, one at PGL WESTBOUND and one at PGL EASTBOUND."
    },
    {
      "name": "Beam",
      "tag": "℄ BEAM 1–12",
      "shape": "linear",
      "material": "",
      "count": 12,
      "note": "Beams 1 through 6 are shown in the upper deck portion; Beams 7 through 12 are shown in the lower deck portion."
    },
    {
      "name": "Edgebeam",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 4,
      "note": "Called out as 1'-0” EDGEBEAM, TYP. along the outside deck edges."
    },
    {
      "name": "Concrete diaphragm",
      "tag": "",
      "shape": "linear transverse diaphragm",
      "material": "concrete",
      "count": 2,
      "note": "Called out as 10” CONCRETE DIAPHRAGM, TYP."
    },
    {
      "name": "Fence post",
      "tag": "",
      "shape": "point",
      "material": "",
      "count": null,
      "note": "Posts are indicated along the outside deck edges; spacing is dimensioned."
    },
    {
      "name": "Reinforcement bar",
      "tag": "12-502D",
      "shape": "bent bar",
      "material": "",
      "count": null,
      "note": "Repeated bar callouts at deck edges."
    },
    {
      "name": "Reinforcement bar",
      "tag": "12-502E",
      "shape": "bent bar",
      "material": "",
      "count": null,
      "note": "Repeated bar callouts at deck edges."
    },
    {
      "name": "Reinforcement bar",
      "tag": "400B",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Shown in each deck portion."
    },
    {
      "name": "Reinforcement bar",
      "tag": "400C",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Shown in each deck portion."
    },
    {
      "name": "Reinforcement bar",
      "tag": "500B",
      "shape": "bent bar",
      "material": "",
      "count": null,
      "note": "Shown in the bar bending detail at skew."
    }
  ],
  "measurements": [
    {
      "label": "Overall deck width",
      "value": "82'-0”",
      "unit": "",
      "appliesTo": "SPAN 2 deck portions"
    },
    {
      "label": "Deck-width segment",
      "value": "16'-4½”",
      "unit": "",
      "appliesTo": "SPAN 2 deck portions; repeated"
    },
    {
      "label": "Deck-width segment",
      "value": "16'-6”",
      "unit": "",
      "appliesTo": "SPAN 2 deck portions"
    },
    {
      "label": "Fence-post end offset",
      "value": "3'-0”",
      "unit": "",
      "appliesTo": "Fence post spacing at outside deck edges"
    },
    {
      "label": "Fence post spacing",
      "value": "9'-6”",
      "unit": "",
      "appliesTo": "Fence posts; repeated"
    },
    {
      "label": "Fence post spacing",
      "value": "9'-10½”",
      "unit": "",
      "appliesTo": "Fence posts; repeated adjacent to CONSTRUCTION ℄ SR 21"
    },
    {
      "label": "End offset",
      "value": "2'-0”",
      "unit": "",
      "appliesTo": "Fence post spacing adjacent to CONSTRUCTION ℄ SR 21"
    },
    {
      "label": "Edgebeam width",
      "value": "1'-0”",
      "unit": "",
      "appliesTo": "Edgebeam"
    },
    {
      "label": "Fillet size",
      "value": "8”",
      "unit": "",
      "appliesTo": "Fillet"
    },
    {
      "label": "Concrete diaphragm thickness",
      "value": "10”",
      "unit": "",
      "appliesTo": "Concrete diaphragm"
    },
    {
      "label": "Minimum reinforcement lap",
      "value": "2'-0”",
      "unit": "",
      "appliesTo": "400C reinforcement bar"
    },
    {
      "label": "Reinforcement dimension",
      "value": "5'-0”",
      "unit": "",
      "appliesTo": "Deck-edge reinforcement callouts"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0”",
      "unit": "",
      "appliesTo": "Deck plan; marked TYP."
    },
    {
      "label": "Gutter-to-gutter dimension",
      "value": "40'-0”",
      "unit": "",
      "appliesTo": "Each deck portion"
    },
    {
      "label": "Out-to-out dimension",
      "value": "43'-7”",
      "unit": "",
      "appliesTo": "Each deck portion"
    },
    {
      "label": "Gutter-to-out dimension",
      "value": "1'-9½”",
      "unit": "",
      "appliesTo": "Each deck portion"
    },
    {
      "label": "PGL-to-deck-edge dimension",
      "value": "22'-0”",
      "unit": "",
      "appliesTo": "PGL WESTBOUND and PGL EASTBOUND"
    },
    {
      "label": "Bearing/direction",
      "value": "N 83°-43'-21.7” E",
      "unit": "",
      "appliesTo": "Construction alignment"
    },
    {
      "label": "Cover dimension",
      "value": "2”",
      "unit": "",
      "appliesTo": "Bar bending detail; label is partial: 2” CL"
    }
  ],
  "notes": [
    "8” FILLET, TYP.",
    "1'-0” EDGEBEAM, TYP.",
    "10” CONCRETE DIAPHRAGM, TYP.",
    "2'-0” MIN. LAP",
    "81°-20'-05.0”, TYP.",
    "BARS ARE DETAILED IN BAR DETAILS AS EQUIV FULL LENGTH BARS.",
    "* SEE SUBSECTION 511.3.05.G.5 OF THE GEORGIA SPECIFICATION FOR PLACEMENT OF 500B BAR.",
    "AT B.F.P.R. OR CONST. JOINT"
  ],
  "labels": [
    "SPAN 2",
    "DECK PLAN",
    "FENCE POST SPACING",
    "PGL WESTBOUND",
    "PGL EASTBOUND",
    "CONSTRUCTION ℄ SR 21",
    "GUTTER TO GUTTER",
    "OUT TO OUT",
    "GUTTER TO OUT",
    "B.F.P.R. OR CONST. JOINT",
    "MAIN SLAB REINF.",
    "BAR BENDING DETAILS AT SKEW",
    "NO SCALE",
    "2” CL (partial)"
  ],
  "description": "This crop is the SPAN 2 DECK PLAN, showing two skewed deck portions separated at the construction centerline for SR 21. It documents Beams 1 through 12, edgebeams, concrete diaphragms, fence-post layout, deck reinforcement callouts, dimensions, and a bar-bending detail at skew."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab with overhangs",
      "material": "",
      "count": 1,
      "note": "Slab spans across six beams."
    },
    {
      "name": "beam",
      "tag": "BEAM 1 to BEAM 6",
      "shape": "I-girder",
      "material": "",
      "count": 6,
      "note": "Six beam sections are visible and individually identified from BEAM 1 through BEAM 6."
    },
    {
      "name": "edge upstand",
      "tag": "",
      "shape": "tapered vertical upstand",
      "material": "",
      "count": 2,
      "note": "One is shown at each outside deck edge; fence is noted as not shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "400A",
      "shape": "linear",
      "material": "",
      "count": 30,
      "note": "Callout states 30-400A SPACED AS SHOWN; additional 6-400A and 14-400A distribution callouts are shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "500A",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Shown at 6½ in. spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "502",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Shown at every 500A."
    },
    {
      "name": "reinforcement bar",
      "tag": "50I",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Shown under every 500A."
    },
    {
      "name": "triangular drip bead",
      "tag": "",
      "shape": "triangular",
      "material": "",
      "count": null,
      "note": "Called out full length of bridge, typical."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Required joint is shown at the right deck edge, parallel with deck."
    }
  ],
  "measurements": [
    {
      "label": "D, interior beams",
      "value": "8¾”",
      "unit": "",
      "appliesTo": "interior beams"
    },
    {
      "label": "D, exterior beams",
      "value": "9⅜”",
      "unit": "",
      "appliesTo": "exterior beams"
    },
    {
      "label": "overall width",
      "value": "43’-7”",
      "unit": "",
      "appliesTo": "deck slab; OUT TO OUT"
    },
    {
      "label": "gutter-to-gutter width",
      "value": "40’-0”",
      "unit": "",
      "appliesTo": "deck slab; GUTTER TO GUTTER"
    },
    {
      "label": "width",
      "value": "22’-0”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "width",
      "value": "14’-2½”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "width",
      "value": "34’-0”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "width",
      "value": "6’-0”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "edge offset",
      "value": "1’-8”",
      "unit": "",
      "appliesTo": "deck edge; shown each side"
    },
    {
      "label": "edge dimension",
      "value": "1½”",
      "unit": "",
      "appliesTo": "deck edge; shown each side"
    },
    {
      "label": "minimum dimension",
      "value": "3’-0” MIN.",
      "unit": "",
      "appliesTo": "right deck edge; TYP."
    },
    {
      "label": "slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "clear cover",
      "value": "2¼”",
      "unit": "",
      "appliesTo": "deck slab reinforcement; CL."
    },
    {
      "label": "slab thickness",
      "value": "7¾”",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "clear cover",
      "value": "1”",
      "unit": "",
      "appliesTo": "deck slab reinforcement; CL."
    },
    {
      "label": "edge vertical dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "deck edge; shown each side"
    },
    {
      "label": "edge vertical dimension",
      "value": "3”",
      "unit": "",
      "appliesTo": "right deck edge"
    },
    {
      "label": "drip bead size",
      "value": "¾”",
      "unit": "",
      "appliesTo": "triangular drip bead"
    },
    {
      "label": "edge dimension",
      "value": "4⅜”",
      "unit": "",
      "appliesTo": "deck edge; shown each side"
    },
    {
      "label": "dimension",
      "value": "3”",
      "unit": "",
      "appliesTo": "beam end / edge; shown multiple locations"
    },
    {
      "label": "beam spacing",
      "value": "7’-6”",
      "unit": "",
      "appliesTo": "BEAM 1 to BEAM 6; shown between adjacent beams"
    },
    {
      "label": "end beam spacing",
      "value": "3’-0½”",
      "unit": "",
      "appliesTo": "outside edge to BEAM 1 and BEAM 6 to outside edge"
    },
    {
      "label": "reinforcement quantity",
      "value": "30-400A",
      "unit": "",
      "appliesTo": "400A reinforcement"
    },
    {
      "label": "reinforcement spacing",
      "value": "6½”",
      "unit": "",
      "appliesTo": "500A reinforcement"
    },
    {
      "label": "reinforcement quantity",
      "value": "6-400A",
      "unit": "",
      "appliesTo": "400A reinforcement at each outside beam zone"
    },
    {
      "label": "reinforcement quantity",
      "value": "14-400A",
      "unit": "",
      "appliesTo": "400A reinforcement at equal spaces, typical"
    }
  ],
  "notes": [
    "FENCE NOT SHOWN, TYP.",
    "502 AT EVERY 500A, TYP.",
    "30-400A SPACED AS SHOWN",
    "500A AT 6½”",
    "50I UNDER EVERY 500A",
    "REQUIRED CONSTRUCTION JOINT PARALLEL WITH DECK, TYP.",
    "¾” TRIANGULAR DRIP BEAD FULL LENGTH OF BRIDGE, TYP."
  ],
  "labels": [
    "SECTION THRU SLAB",
    "SR 21 WB = PGL",
    "OUT TO OUT",
    "GUTTER TO GUTTER"
  ],
  "description": "This crop is a transverse section through the bridge deck slab, showing the slab over six I-girder beam sections. It documents deck width, beam spacing, slab slope and thickness, reinforcement callouts, edge upstands, a construction joint, and typical drip bead detail."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "rectangular slab with overhangs",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown over two beam lines; top and bottom reinforcement are depicted."
    },
    {
      "name": "girder",
      "tag": "",
      "shape": "I-girder",
      "material": "",
      "count": 2,
      "note": "Two girders are visible beneath the slab."
    },
    {
      "name": "reinforcement bar",
      "tag": "600",
      "shape": "bar",
      "material": "reinforcing steel",
      "count": 58,
      "note": "Callout states 2 between each pair of 400 bars in top of slab over intermediate bents."
    },
    {
      "name": "reinforcement bar",
      "tag": "400",
      "shape": "bar",
      "material": "reinforcing steel",
      "count": null,
      "note": "Referenced in the 600-bar callout as bars in top of slab."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "tapered vertical section",
      "material": "",
      "count": 1,
      "note": "Partial barrier section is visible at the left slab edge."
    }
  ],
  "measurements": [
    {
      "label": "600 bars",
      "value": "58",
      "unit": "",
      "appliesTo": "600"
    },
    {
      "label": "bars between each pair of 400 bars",
      "value": "2",
      "unit": "",
      "appliesTo": "600"
    }
  ],
  "notes": [
    "58-600 (2 BETWEEN EACH PAIR OF 400 BARS IN TOP OF SLAB OVER INTERMEDIATE BENTS)"
  ],
  "labels": [
    "SECTION THRU SLAB AT INTERMEDIATE BENT"
  ],
  "description": "This crop shows a transverse section through the bridge deck slab at an intermediate bent. The reinforced concrete deck is shown supported by two I-girders, with a partial edge barrier at the left and a callout for 600 reinforcement bars in the top of slab."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": 1,
      "note": "Slab spans over six beams with overhangs at both edges."
    },
    {
      "name": "beam",
      "tag": "BEAM 1 through BEAM 6",
      "shape": "I-girder",
      "material": "",
      "count": 6,
      "note": "Six beam centerlines are shown."
    },
    {
      "name": "edge barrier",
      "tag": "",
      "shape": "tapered",
      "material": "",
      "count": 2,
      "note": "One barrier is shown at each deck edge."
    },
    {
      "name": "reinforcement bar",
      "tag": "30-400A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Spaced as shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "500A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Shown at 6½\" spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "502",
      "shape": "",
      "material": "",
      "count": null,
      "note": "At every 500A, typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "50I",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Under every 500A."
    },
    {
      "name": "reinforcement bar",
      "tag": "6-400A",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Shown at equal spaces at both exterior beam regions."
    },
    {
      "name": "reinforcement bar",
      "tag": "14-400A",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "At equal spaces, typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "7-403A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Partial lower detail only."
    },
    {
      "name": "reinforcement bar",
      "tag": "2-507A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Partial lower detail only."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Required joint shown at the right deck edge."
    },
    {
      "name": "triangular drip bead",
      "tag": "",
      "shape": "triangular",
      "material": "",
      "count": 1,
      "note": "Full-length drip bead, typical."
    }
  ],
  "measurements": [
    {
      "label": "Interior-beam dimension “D”",
      "value": "8¾”",
      "unit": "",
      "appliesTo": "deck slab / interior beams"
    },
    {
      "label": "Exterior-beam dimension “D”",
      "value": "9⅞”",
      "unit": "",
      "appliesTo": "deck slab / exterior beams"
    },
    {
      "label": "Slab thickness between beams",
      "value": "7¾”",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "Slab thickness in overhangs",
      "value": "8”",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "Overall out-to-out width",
      "value": "43’-7”",
      "unit": "",
      "appliesTo": "deck slab section"
    },
    {
      "label": "Gutter-to-gutter width",
      "value": "40’-0”",
      "unit": "",
      "appliesTo": "deck slab section"
    },
    {
      "label": "Width dimension",
      "value": "22’-0”",
      "unit": "",
      "appliesTo": "right portion of deck slab section"
    },
    {
      "label": "Width dimension",
      "value": "14’-2½”",
      "unit": "",
      "appliesTo": "right portion of deck slab section"
    },
    {
      "label": "Width dimension",
      "value": "34’-0”",
      "unit": "",
      "appliesTo": "deck slab section"
    },
    {
      "label": "Width dimension",
      "value": "6’-0”",
      "unit": "",
      "appliesTo": "deck slab section"
    },
    {
      "label": "Gutter offset",
      "value": "1’-8”",
      "unit": "",
      "appliesTo": "both deck edges"
    },
    {
      "label": "Edge offset",
      "value": "1½”",
      "unit": "",
      "appliesTo": "both deck edges"
    },
    {
      "label": "Barrier-side minimum width",
      "value": "3’-0” MIN.",
      "unit": "",
      "appliesTo": "right edge barrier"
    },
    {
      "label": "Slab clear cover",
      "value": "2¾” CL.",
      "unit": "",
      "appliesTo": "deck slab reinforcement"
    },
    {
      "label": "Slab clear cover",
      "value": "1” CL.",
      "unit": "",
      "appliesTo": "deck slab reinforcement"
    },
    {
      "label": "Deck cross slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "Reinforcement spacing",
      "value": "6½”",
      "unit": "",
      "appliesTo": "500A"
    },
    {
      "label": "End reinforcement spacing",
      "value": "4⅜”",
      "unit": "",
      "appliesTo": "6-400A"
    },
    {
      "label": "Reinforcement spacing",
      "value": "3”",
      "unit": "",
      "appliesTo": "6-400A"
    },
    {
      "label": "Reinforcement spacing",
      "value": "3”",
      "unit": "",
      "appliesTo": "14-400A"
    },
    {
      "label": "Beam-side spacing",
      "value": "3”",
      "unit": "",
      "appliesTo": "beam regions"
    },
    {
      "label": "Exterior beam spacing",
      "value": "3’-0½”",
      "unit": "",
      "appliesTo": "BEAM 1 / BEAM 6 to deck edge"
    },
    {
      "label": "Beam spacing",
      "value": "7’-6”",
      "unit": "",
      "appliesTo": "BEAM 1 through BEAM 6"
    },
    {
      "label": "Drip-bead offset",
      "value": "3”",
      "unit": "",
      "appliesTo": "triangular drip bead"
    },
    {
      "label": "Drip-bead size",
      "value": "¾”",
      "unit": "",
      "appliesTo": "triangular drip bead"
    },
    {
      "label": "Partial lower-detail dimension",
      "value": "5”",
      "unit": "",
      "appliesTo": "7-403A detail"
    },
    {
      "label": "Partial lower-detail dimension",
      "value": "2”",
      "unit": "",
      "appliesTo": "lower-right partial detail"
    },
    {
      "label": "Partial lower-detail cover",
      "value": "1½” CL. TYP.",
      "unit": "",
      "appliesTo": "403A lower-right partial detail"
    }
  ],
  "notes": [
    "DIMENSION “D” IS MEASURED FROM TOP OF SLAB TO TOP OF BEAMS AT CENTERLINE BEARING. VARY “D” BETWEEN BEARINGS TO COMPENSATE FOR DEAD LOAD DEFLECTION, AND VERTICAL CURVE.",
    "MAINTAIN A CONSTANT SLAB THICKNESS OF 7¾” BETWEEN BEAMS AND 8” IN THE OVERHANGS.",
    "“D” = 8¾” INTERIOR BEAMS",
    "“D” = 9⅞” EXTERIOR BEAMS",
    "FENCE NOT SHOWN, TYP.",
    "502 AT EVERY 500A, TYP.",
    "30-400A SPACED AS SHOWN",
    "500A AT 6½”",
    "50I UNDER EVERY 500A",
    "REQUIRED CONSTRUCTION JOINT PARALLEL WITH DECK, TYP.",
    "℄ ¾” TRIANGULAR DRIP BEAD FULL LENGTH OF BRIDGE, TYP.",
    "AT EQ. SPS.",
    "AT EQUAL SPACES, TYP.",
    "AT EQUAL SPACES"
  ],
  "labels": [
    "SECTION THRU SLAB",
    "SR 21 WB = PGL",
    "℄ SR 21/MIL",
    "= ℄ CONSTR",
    "= ℄ SYMMET",
    "BEAM 1",
    "BEAM 2",
    "BEAM 3",
    "BEAM 4",
    "BEAM 5",
    "BEAM 6",
    "7-403A",
    "403A"
  ],
  "description": "This crop primarily shows a transverse section through the bridge deck slab, supported on six I-girders, with deck overhangs and edge barriers. It documents slab geometry, beam spacing, deck reinforcement callouts, a construction joint, and a full-length triangular drip bead; partial additional details are visible along the bottom and right edges."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping slab",
      "material": "",
      "count": 1,
      "note": "Supported across the visible beam line."
    },
    {
      "name": "bridge beams/girders",
      "tag": "",
      "shape": "I-girder-like profile as drawn",
      "material": "",
      "count": 5,
      "note": "Five beam profiles are visible below the deck slab."
    },
    {
      "name": "diaphragms between beams",
      "tag": "",
      "shape": "rectangular/stepped blocks as drawn",
      "material": "",
      "count": 4,
      "note": "Located in the four spaces between the five visible beams."
    },
    {
      "name": "edge barriers/parapets",
      "tag": "",
      "shape": "tapered vertical profiles",
      "material": "",
      "count": 2,
      "note": "Both are only partially visible at the left and right crop edges."
    },
    {
      "name": "reinforcement bars",
      "tag": "403A",
      "shape": "straight bars",
      "material": "",
      "count": 7,
      "note": "Shown at equal spaces."
    },
    {
      "name": "reinforcement bars",
      "tag": "507A",
      "shape": "straight bars",
      "material": "",
      "count": null,
      "note": "Two separate callouts read 2-507A; total placement count cannot be determined from this crop."
    },
    {
      "name": "reinforcement bars",
      "tag": "402A",
      "shape": "straight bars",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "straight bar",
      "material": "",
      "count": null,
      "note": "Called out as 1-inch diameter plain bar."
    }
  ],
  "measurements": [
    {
      "label": "end spacing at 403A bar group",
      "value": "5\"",
      "unit": "",
      "appliesTo": "403A"
    },
    {
      "label": "reinforcement quantity",
      "value": "7",
      "unit": "",
      "appliesTo": "403A"
    },
    {
      "label": "end spacing at 403A bar group",
      "value": "5\"",
      "unit": "",
      "appliesTo": "403A"
    },
    {
      "label": "deck slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "plain bar diameter",
      "value": "1\"",
      "unit": "",
      "appliesTo": "plain bar"
    },
    {
      "label": "reinforcement quantity",
      "value": "2",
      "unit": "",
      "appliesTo": "507A"
    },
    {
      "label": "reinforcement quantity",
      "value": "4",
      "unit": "",
      "appliesTo": "402A"
    },
    {
      "label": "reinforcement quantity",
      "value": "2",
      "unit": "",
      "appliesTo": "507A"
    }
  ],
  "notes": [],
  "labels": [
    "AT EQUAL SPACES",
    "SR 21 WB = PGL",
    "SECTION THRU DIAPHRAGM",
    "FENC (partial)"
  ],
  "description": "This crop is a cross section titled \"SECTION THRU DIAPHRAGM,\" showing a sloping deck slab supported over five visible beam/girder profiles. It documents the diaphragms between the beams and the associated reinforcement callouts, including 403A, 402A, 507A, and 1-inch diameter plain bar."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": 1,
      "note": "Slab is shown continuous across the girder line with a 2% cross slope."
    },
    {
      "name": "girders",
      "tag": "",
      "shape": "I-girder / bulb-tee-like section",
      "material": "",
      "count": 5,
      "note": "Five longitudinal girder sections are visible beneath the slab."
    },
    {
      "name": "reinforcement bar",
      "tag": "403A",
      "shape": "bar",
      "material": "",
      "count": 7,
      "note": "Shown at equal spaces between 5 in. end offsets."
    },
    {
      "name": "reinforcement bar",
      "tag": "507A",
      "shape": "straight bar",
      "material": "",
      "count": 2,
      "note": "Two separate 2-507A callouts are shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "402A",
      "shape": "straight bar",
      "material": "",
      "count": 4,
      "note": "Callout points to reinforcement within a girder section."
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "circular bar",
      "material": "",
      "count": null,
      "note": "Called out as 1 in. diameter plain bar."
    }
  ],
  "measurements": [
    {
      "label": "cross slope",
      "value": "2%",
      "unit": "%",
      "appliesTo": "deck slab"
    },
    {
      "label": "end offset",
      "value": "5”",
      "unit": "",
      "appliesTo": "403A reinforcement"
    },
    {
      "label": "end offset",
      "value": "5”",
      "unit": "",
      "appliesTo": "403A reinforcement"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "7-403A",
      "unit": "",
      "appliesTo": "403A reinforcement"
    },
    {
      "label": "plain bar diameter",
      "value": "1”",
      "unit": "",
      "appliesTo": "plain bar"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-507A",
      "unit": "",
      "appliesTo": "507A reinforcement"
    },
    {
      "label": "reinforcement quantity",
      "value": "4-402A",
      "unit": "",
      "appliesTo": "402A reinforcement"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-507A",
      "unit": "",
      "appliesTo": "507A reinforcement"
    }
  ],
  "notes": [
    "FENCE NOT SHOWN, TYP."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "AT EQUAL SPACES",
    "SECTION THRU DIAPHRAGM"
  ],
  "description": "This crop shows a section through a bridge diaphragm, with a sloping deck slab supported by five visible girder sections. Reinforcement callouts identify 403A, 507A, 402A, and a 1 in. diameter plain bar; the profile grade line is identified as SR 21 WB = PGL."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "concrete diaphragm",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "Labeled 10\" CONC. DIAPH."
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": "Only a cropped portion is shown; TOP OF BEAM is identified."
    },
    {
      "name": "slab",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Slab reinforcement is noted as not shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "507A",
      "shape": "circular bar ends shown",
      "material": "",
      "count": 4,
      "note": "Shown as two 2-507A callouts."
    },
    {
      "name": "reinforcement bar",
      "tag": "402A",
      "shape": "circular bar ends shown",
      "material": "",
      "count": 4,
      "note": "Callout reads 4-402A."
    },
    {
      "name": "reinforcement bar",
      "tag": "403A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Bar mark shown without a printed quantity."
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Labeled 1\" DIA. PLAIN BAR."
    }
  ],
  "measurements": [
    {
      "label": "concrete diaphragm width",
      "value": "10\"",
      "unit": "",
      "appliesTo": "concrete diaphragm"
    },
    {
      "label": "vertical dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "vertical dimension",
      "value": "2'-4\"",
      "unit": "",
      "appliesTo": "concrete diaphragm"
    },
    {
      "label": "clear dimension, typical",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "diaphragm reinforcement"
    },
    {
      "label": "plain bar diameter",
      "value": "1\"",
      "unit": "",
      "appliesTo": "plain bar"
    },
    {
      "label": "drawing scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION THRU DIAPHRAGM"
    }
  ],
  "notes": [
    "SLAB REINFORCEMENT NOT SHOWN"
  ],
  "labels": [
    "TOP OF BEAM",
    "SECTION THRU DIAPHRAGM",
    "SPANS 1 AND 3",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "This crop shows a section through a 10-inch concrete diaphragm for Spans 1 and 3, at the beam and slab. The diaphragm reinforcement is shown with 507A, 402A, and 403A bar callouts and a 1-inch-diameter plain bar; slab reinforcement is not shown."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "concrete diaphragm",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "Dimensioned across its thickness; shown between beam portions."
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": "Only portions adjacent to the diaphragm are shown; top is identified by a callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "507A",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Shown as 2-507A at the top and 2-507A at the bottom of the diaphragm."
    },
    {
      "name": "reinforcement bar",
      "tag": "402A",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Shown within the diaphragm."
    },
    {
      "name": "reinforcement bar",
      "tag": "403A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Callout points to diagonal reinforcement in the diaphragm; no quantity is printed."
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "circular in section",
      "material": "",
      "count": 1,
      "note": "Called out as 1 in. diameter."
    }
  ],
  "measurements": [
    {
      "label": "concrete diaphragm thickness",
      "value": "10",
      "unit": "",
      "appliesTo": "concrete diaphragm"
    },
    {
      "label": "clear cover",
      "value": "1½\"",
      "unit": "",
      "appliesTo": "reinforcement in diaphragm"
    },
    {
      "label": "plain bar diameter",
      "value": "1\"",
      "unit": "",
      "appliesTo": "plain bar"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-507A",
      "unit": "",
      "appliesTo": "507A"
    },
    {
      "label": "reinforcement quantity",
      "value": "4-402A",
      "unit": "",
      "appliesTo": "402A"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-507A",
      "unit": "",
      "appliesTo": "507A"
    },
    {
      "label": "scale",
      "value": "¾\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION THRU DIAPHRAGM"
    }
  ],
  "notes": [
    "SLAB REINFORCEMENT NOT SHOWN"
  ],
  "labels": [
    "TOP OF BEAM",
    "SECTION THRU DIAPHRAGM",
    "SPANS 1 AND 3",
    "SCALE: ¾\" = 1'-0\""
  ],
  "description": "This crop shows a section through a concrete diaphragm at Spans 1 and 3, with adjacent portions of the beams. The diaphragm reinforcement is detailed with 507A, 402A, and 403A bars, plus a 1 in. diameter plain bar; slab reinforcement is noted as not shown."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "concrete",
      "count": 1,
      "note": "Shown across the girder line with a 2% cross slope."
    },
    {
      "name": "edge beam",
      "tag": "",
      "shape": "rectangular thickened slab edge",
      "material": "concrete",
      "count": 2,
      "note": "Typical callout directs edge beam to be poured flush with outside face of beam."
    },
    {
      "name": "parapet/barrier",
      "tag": "",
      "shape": "tapered",
      "material": "",
      "count": 2,
      "note": "One is shown at each outside edge; fence is noted as not shown."
    },
    {
      "name": "I-girder",
      "tag": "",
      "shape": "I-girder",
      "material": "",
      "count": 6,
      "note": "Bearing pads are noted as not shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "404",
      "shape": "straight",
      "material": "steel",
      "count": 8,
      "note": "At equal spaces."
    },
    {
      "name": "reinforcement bar",
      "tag": "509",
      "shape": "straight",
      "material": "steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "508",
      "shape": "straight",
      "material": "steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "802",
      "shape": "straight",
      "material": "steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "801",
      "shape": "straight",
      "material": "steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "800",
      "shape": "straight",
      "material": "steel",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "slab/overhang thickness",
      "value": "8”",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "dimension at left end of 404 bar group",
      "value": "2”",
      "unit": "",
      "appliesTo": "reinforcement bar 404"
    },
    {
      "label": "reinforcement quantity and mark",
      "value": "8-404",
      "unit": "",
      "appliesTo": "reinforcement bar 404"
    },
    {
      "label": "dimension at right end of 404 bar group",
      "value": "2”",
      "unit": "",
      "appliesTo": "reinforcement bar 404"
    },
    {
      "label": "cross slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "reinforcement quantity and mark",
      "value": "1-509",
      "unit": "",
      "appliesTo": "reinforcement bar 509"
    },
    {
      "label": "reinforcement quantity and mark",
      "value": "1-508",
      "unit": "",
      "appliesTo": "reinforcement bar 508"
    },
    {
      "label": "reinforcement quantity and mark",
      "value": "1-802",
      "unit": "",
      "appliesTo": "reinforcement bar 802"
    },
    {
      "label": "reinforcement quantity and mark",
      "value": "1-801",
      "unit": "",
      "appliesTo": "reinforcement bar 801"
    },
    {
      "label": "reinforcement quantity and mark",
      "value": "2-800",
      "unit": "",
      "appliesTo": "reinforcement bar 800"
    },
    {
      "label": "form removal time",
      "value": "72",
      "unit": "HOURS",
      "appliesTo": "edge beam forms"
    },
    {
      "label": "concrete strength age",
      "value": "28",
      "unit": "DAY",
      "appliesTo": "deck concrete"
    }
  ],
  "notes": [
    "FENCE NOT SHOWN, TYP.",
    "POUR EDGE BEAM FLUSH WITH OUTSIDE FACE OF BEAM, TYP.",
    "NOTE: BEARING PADS NOT SHOWN",
    "DO NOT REMOVE EDGE BEAM FORMS UNTIL 72 HOURS AFTER THE DECK POUR IS COMPLETED OR DECK REACHES 28 DAY CONCRETE STRENGTH."
  ],
  "labels": [
    "SECTION THRU DIAPHRAGM",
    "SR 21 WB = PGL",
    "SECTION THRU EDGE BEAM"
  ],
  "description": "This crop shows a transverse bridge section through the diaphragm and edge-beam region. It depicts a sloping concrete deck over six I-girders, exterior edge beams and tapered exterior barriers, with reinforcement callouts and edge-beam forming instructions."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping planar slab",
      "material": "concrete",
      "count": 1,
      "note": "Shown with a 2% cross slope."
    },
    {
      "name": "edge beam",
      "tag": "",
      "shape": "rectangular thickened slab edge",
      "material": "concrete",
      "count": 2,
      "note": "Shown at both outside deck edges; pour flush with outside face of beam."
    },
    {
      "name": "parapet/barrier",
      "tag": "",
      "shape": "tapered upright",
      "material": "",
      "count": 2,
      "note": "One is shown at each outside edge."
    },
    {
      "name": "I-girder",
      "tag": "",
      "shape": "I-section",
      "material": "",
      "count": 6,
      "note": "Supporting girders shown below the deck slab."
    },
    {
      "name": "bent cap",
      "tag": "",
      "shape": "stepped rectangular",
      "material": "",
      "count": 1,
      "note": "Continuous cap is shown beneath the girders."
    },
    {
      "name": "reinforcement bar",
      "tag": "404",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 8,
      "note": "Called out as 8-404 at equal spaces."
    },
    {
      "name": "reinforcement bar",
      "tag": "509",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 1,
      "note": "Callout shown as 1-509."
    },
    {
      "name": "reinforcement bar",
      "tag": "508",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 1,
      "note": "Callout shown as 1-508."
    },
    {
      "name": "reinforcement bar",
      "tag": "802",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 1,
      "note": "Callout shown as 1-802."
    },
    {
      "name": "reinforcement bar",
      "tag": "801",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 1,
      "note": "Callout shown as 1-801."
    },
    {
      "name": "reinforcement bar",
      "tag": "800",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 2,
      "note": "Callout shown as 2-800."
    }
  ],
  "measurements": [
    {
      "label": "Typical slab/overhang thickness",
      "value": "8”",
      "unit": "",
      "appliesTo": "deck slab / edge beam"
    },
    {
      "label": "End distance",
      "value": "2”",
      "unit": "",
      "appliesTo": "reinforcement bar 404"
    },
    {
      "label": "Reinforcement quantity and mark",
      "value": "8-404",
      "unit": "",
      "appliesTo": "reinforcement bar 404"
    },
    {
      "label": "Cross slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "End distance",
      "value": "2”",
      "unit": "",
      "appliesTo": "reinforcement bar 404"
    },
    {
      "label": "Reinforcement quantity and mark",
      "value": "2-800",
      "unit": "",
      "appliesTo": "reinforcement bar 800"
    },
    {
      "label": "Form removal time",
      "value": "72 HOURS",
      "unit": "",
      "appliesTo": "edge beam forms"
    },
    {
      "label": "Concrete strength age",
      "value": "28 DAY",
      "unit": "",
      "appliesTo": "deck concrete"
    }
  ],
  "notes": [
    "FENCE NOT SHOWN, TYP.",
    "POUR EDGE BEAM FLUSH WITH OUTSIDE FACE OF BEAM, TYP.",
    "NOTE: BEARING PADS NOT SHOWN",
    "DO NOT REMOVE EDGE BEAM FORMS UNTIL 72 HOURS AFTER THE DECK POUR IS COMPLETED OR DECK REACHES 28 DAY CONCRETE STRENGTH."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU EDGE BEAM"
  ],
  "description": "This crop is a cross section titled SECTION THRU EDGE BEAM, showing the sloped deck slab and outside edge beams over six I-section girders on a stepped bent cap. Reinforcement callouts are shown within the deck/edge-beam and girder region, along with notes for edge-beam pouring, bearing pads, fence, and form removal."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": 1,
      "note": "Slab section is shown over beams, with an exterior overhang."
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "partial I-girder/beam section",
      "material": "",
      "count": 2,
      "note": "Only the upper portions of two beams are visible at the bottom of the crop."
    },
    {
      "name": "parapet/barrier",
      "tag": "",
      "shape": "tapered",
      "material": "",
      "count": 1,
      "note": "Located at the exterior slab edge."
    },
    {
      "name": "reinforcement bar",
      "tag": "502",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Callout states 502 AT EVERY 500A, TYP."
    },
    {
      "name": "reinforcement bar",
      "tag": "30-400A",
      "shape": "circular section/linear",
      "material": "",
      "count": null,
      "note": "Spaced as shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "500A",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Callout states 500A AT 6½ in; additional callout states 50I UNDER EVERY 500A."
    }
  ],
  "measurements": [
    {
      "label": "Dimension “D” — interior beams",
      "value": "8¾”",
      "unit": "",
      "appliesTo": "interior beams"
    },
    {
      "label": "Dimension “D” — exterior beams",
      "value": "9⅛”",
      "unit": "",
      "appliesTo": "exterior beams"
    },
    {
      "label": "Constant slab thickness between beams",
      "value": "7¾”",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "Slab thickness in overhangs",
      "value": "8”",
      "unit": "",
      "appliesTo": "deck slab overhangs"
    },
    {
      "label": "Horizontal dimension",
      "value": "1½”",
      "unit": "",
      "appliesTo": "exterior edge detail"
    },
    {
      "label": "Horizontal dimension",
      "value": "1'-8”",
      "unit": "",
      "appliesTo": "exterior overhang"
    },
    {
      "label": "Vertical dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "exterior slab edge"
    },
    {
      "label": "Reinforcement spacing callout",
      "value": "500A",
      "unit": "",
      "appliesTo": "502"
    },
    {
      "label": "Reinforcement location",
      "value": "6½”",
      "unit": "",
      "appliesTo": "500A"
    },
    {
      "label": "Slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    }
  ],
  "notes": [
    "DIMENSION “D” IS MEASURED FROM TOP OF SLAB TO TOP OF BEAMS AT CENTERLINE BEARING. VARY “D” BETWEEN BEARINGS TO COMPENSATE FOR DEAD LOAD DEFLECTION, AND VERTICAL CURVE.",
    "MAINTAIN A CONSTANT SLAB THICKNESS OF 7¾” BETWEEN BEAMS AND 8” IN THE OVERHANGS.",
    "FENCE NOT SHOWN, TYP.",
    "502 AT EVERY 500A, TYP.",
    "30-400A SPACED AS SHOWN",
    "500A AT 6½”",
    "50I UNDER EVERY 500A"
  ],
  "labels": [],
  "description": "This crop shows an exterior bridge deck cross section at a parapet/barrier and over the tops of supporting beams. It documents slab thicknesses, the variable dimension “D,” deck slope, exterior overhang dimensions, and reinforcement callouts."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping planar slab",
      "material": "",
      "count": 1,
      "note": "Shown transversely over six beams; slab depth varies as dimension “D”."
    },
    {
      "name": "beam",
      "tag": "BEAM 1 through BEAM 6",
      "shape": "I-girder",
      "material": "",
      "count": 6,
      "note": "Six beam cross sections are visible beneath the slab."
    },
    {
      "name": "concrete traffic barrier",
      "tag": "",
      "shape": "tapered",
      "material": "",
      "count": 2,
      "note": "One barrier is shown at each outside edge of the slab."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "linear joint",
      "material": "",
      "count": 1,
      "note": "Callout identifies a required construction joint parallel with deck, typical."
    },
    {
      "name": "triangular drip bead",
      "tag": "",
      "shape": "triangular",
      "material": "",
      "count": 1,
      "note": "Callout indicates drip bead full length of bridge, typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "502",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Callout: 502 at every 500A, typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "400A",
      "shape": "linear",
      "material": "",
      "count": 30,
      "note": "30-400A spaced as shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "500A",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Shown at 6½ in. spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "501",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "501 under every 500A."
    },
    {
      "name": "reinforcement bar",
      "tag": "400A",
      "shape": "linear",
      "material": "",
      "count": 6,
      "note": "6-400A at equal spaces is shown at each exterior beam location."
    },
    {
      "name": "reinforcement bar",
      "tag": "400A",
      "shape": "linear",
      "material": "",
      "count": 14,
      "note": "14-400A at equal spaces, typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "403A",
      "shape": "linear",
      "material": "",
      "count": 7,
      "note": "Partially shown in the lower cropped detail; at equal spaces."
    },
    {
      "name": "reinforcement bar",
      "tag": "507A",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Partially shown in the lower cropped detail."
    }
  ],
  "measurements": [
    {
      "label": "out to out",
      "value": "43'-7\"",
      "unit": "ft-in",
      "appliesTo": "deck width"
    },
    {
      "label": "gutter to gutter",
      "value": "40'-0\"",
      "unit": "ft-in",
      "appliesTo": "deck width"
    },
    {
      "label": "deck width dimension",
      "value": "34'-0\"",
      "unit": "ft-in",
      "appliesTo": "deck slab"
    },
    {
      "label": "deck width dimension",
      "value": "6'-0\"",
      "unit": "ft-in",
      "appliesTo": "deck slab"
    },
    {
      "label": "deck width dimension",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "deck slab"
    },
    {
      "label": "deck width dimension",
      "value": "14'-2½\"",
      "unit": "ft-in",
      "appliesTo": "deck slab"
    },
    {
      "label": "edge dimension",
      "value": "1'-8\"",
      "unit": "ft-in",
      "appliesTo": "deck edge"
    },
    {
      "label": "edge dimension",
      "value": "1'-8\"",
      "unit": "ft-in",
      "appliesTo": "deck edge"
    },
    {
      "label": "edge dimension",
      "value": "1/2\"",
      "unit": "in",
      "appliesTo": "deck edge"
    },
    {
      "label": "edge dimension",
      "value": "1/2\"",
      "unit": "in",
      "appliesTo": "deck edge"
    },
    {
      "label": "barrier height",
      "value": "8\"",
      "unit": "in",
      "appliesTo": "concrete traffic barrier"
    },
    {
      "label": "barrier height",
      "value": "8\"",
      "unit": "in",
      "appliesTo": "concrete traffic barrier"
    },
    {
      "label": "minimum dimension",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "deck edge, TYP."
    },
    {
      "label": "deck cross slope",
      "value": "2%",
      "unit": "%",
      "appliesTo": "deck slab"
    },
    {
      "label": "clear cover",
      "value": "2¾\"",
      "unit": "in",
      "appliesTo": "deck slab reinforcement"
    },
    {
      "label": "slab thickness",
      "value": "7¾\"",
      "unit": "in",
      "appliesTo": "deck slab"
    },
    {
      "label": "clear cover",
      "value": "1\"",
      "unit": "in",
      "appliesTo": "deck slab reinforcement"
    },
    {
      "label": "reinforcement spacing",
      "value": "6½\"",
      "unit": "in",
      "appliesTo": "500A"
    },
    {
      "label": "beam-side dimension",
      "value": "3\"",
      "unit": "in",
      "appliesTo": "beam, TYP."
    },
    {
      "label": "beam-side dimension",
      "value": "3\"",
      "unit": "in",
      "appliesTo": "beam, TYP."
    },
    {
      "label": "exterior dimension",
      "value": "4⅜\"",
      "unit": "in",
      "appliesTo": "exterior beam location"
    },
    {
      "label": "exterior dimension",
      "value": "4⅜\"",
      "unit": "in",
      "appliesTo": "exterior beam location"
    },
    {
      "label": "left overhang",
      "value": "3'-0½\"",
      "unit": "ft-in",
      "appliesTo": "deck slab"
    },
    {
      "label": "beam spacing",
      "value": "7'-6\"",
      "unit": "ft-in",
      "appliesTo": "BEAM 1 to BEAM 2"
    },
    {
      "label": "beam spacing",
      "value": "7'-6\"",
      "unit": "ft-in",
      "appliesTo": "BEAM 2 to BEAM 3"
    },
    {
      "label": "beam spacing",
      "value": "7'-6\"",
      "unit": "ft-in",
      "appliesTo": "BEAM 3 to BEAM 4"
    },
    {
      "label": "beam spacing",
      "value": "7'-6\"",
      "unit": "ft-in",
      "appliesTo": "BEAM 4 to BEAM 5"
    },
    {
      "label": "beam spacing",
      "value": "7'-6\"",
      "unit": "ft-in",
      "appliesTo": "BEAM 5 to BEAM 6"
    },
    {
      "label": "right overhang",
      "value": "3'-0½\"",
      "unit": "ft-in",
      "appliesTo": "deck slab"
    },
    {
      "label": "drip bead dimension",
      "value": "3/4\"",
      "unit": "in",
      "appliesTo": "triangular drip bead"
    },
    {
      "label": "reinforcement end dimension",
      "value": "5\"",
      "unit": "in",
      "appliesTo": "403A, partial lower detail"
    },
    {
      "label": "reinforcement end dimension",
      "value": "5\"",
      "unit": "in",
      "appliesTo": "403A, partial lower detail"
    },
    {
      "label": "partial lower detail dimension",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "partial lower-right detail"
    },
    {
      "label": "clear cover",
      "value": "1½\"",
      "unit": "in",
      "appliesTo": "partial lower-right detail, TYP."
    },
    {
      "label": "partial lower detail dimension",
      "value": "4\"",
      "unit": "in",
      "appliesTo": "partial lower-right detail"
    }
  ],
  "notes": [
    "DIMENSION “D” IS MEASURED FROM TOP OF SLAB TO TOP OF BEAMS AT CENTERLINE BEARING. VARY “D” BETWEEN BEARINGS TO COMPENSATE FOR DEAD LOAD DEFLECTION, AND VERTICAL CURVE.",
    "MAINTAIN A CONSTANT SLAB THICKNESS OF 7¾” BETWEEN BEAMS AND 8” IN THE OVERHANGS.",
    "“D” = 8¾” INTERIOR BEAMS",
    "“D” = 9⅛” EXTERIOR BEAMS",
    "FENCE NOT SHOWN, TYP.",
    "REQUIRED CONSTRUCTION JOINT PARALLEL WITH DECK, TYP.",
    "3/4” TRIANGULAR DRIP BEAD FULL LENGTH OF BRIDGE, TYP.",
    "FENCE NOT SHOWN, TYP."
  ],
  "labels": [
    "SECTION THRU SLAB",
    "SR 21 WB = PGL"
  ],
  "description": "This crop shows a transverse section through a bridge deck slab supported on six I-shaped beams, with tapered edge barriers and deck reinforcement callouts. It documents slab geometry, beam spacing, overhangs, reinforcement, construction joint, and drip-bead requirements; partial portions of additional details are visible below and at the right edge."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloped rectangular slab",
      "material": "",
      "count": 1,
      "note": "Sectioned slab spans over six beams; slab thickness is called out."
    },
    {
      "name": "beam",
      "tag": "BEAM 1 through BEAM 6",
      "shape": "I-girder",
      "material": "",
      "count": 6,
      "note": "Beam centerlines are identified as C BEAM 1 through C BEAM 6."
    },
    {
      "name": "edge barrier",
      "tag": "",
      "shape": "tapered parapet/barrier",
      "material": "",
      "count": 2,
      "note": "One is shown at each outside edge of the slab."
    },
    {
      "name": "reinforcement bar",
      "tag": "400A",
      "shape": "linear bar",
      "material": "",
      "count": 6,
      "note": "Called out at equal spaces at each exterior side."
    },
    {
      "name": "reinforcement bar",
      "tag": "400A",
      "shape": "linear bar",
      "material": "",
      "count": 14,
      "note": "Called out at equal spaces, typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "400A",
      "shape": "linear bar",
      "material": "",
      "count": 30,
      "note": "Spaced as shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "500A",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Called out at 6 1/2 inches and under every 500A."
    },
    {
      "name": "reinforcement bar",
      "tag": "501",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Under every 500A."
    },
    {
      "name": "reinforcement bar",
      "tag": "502",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "At every 500A, typical."
    },
    {
      "name": "triangular drip bead",
      "tag": "",
      "shape": "triangular",
      "material": "",
      "count": null,
      "note": "Called out full length of bridge, typical."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "linear joint",
      "material": "",
      "count": null,
      "note": "Required parallel with deck, typical."
    }
  ],
  "measurements": [
    {
      "label": "out to out",
      "value": "43'-7\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "gutter to gutter",
      "value": "40'-0\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "",
      "value": "14'-2½\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "",
      "value": "34'-0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "",
      "value": "1'-8\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "",
      "value": "1'-8\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "",
      "value": "1½\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "",
      "value": "1½\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "clear cover",
      "value": "2¼\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "slab thickness",
      "value": "7¾\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "clear cover",
      "value": "1\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "minimum, typical",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "construction joint"
    },
    {
      "label": "",
      "value": "8\"",
      "unit": "",
      "appliesTo": "edge barrier"
    },
    {
      "label": "",
      "value": "8\"",
      "unit": "",
      "appliesTo": "edge barrier"
    },
    {
      "label": "typical",
      "value": "3\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "typical",
      "value": "3\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "triangular drip bead",
      "value": "¾\"",
      "unit": "",
      "appliesTo": "triangular drip bead"
    },
    {
      "label": "",
      "value": "4⅜\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "",
      "value": "4⅜\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "",
      "value": "3'-0½\"",
      "unit": "",
      "appliesTo": "deck slab overhang"
    },
    {
      "label": "",
      "value": "3'-0½\"",
      "unit": "",
      "appliesTo": "deck slab overhang"
    },
    {
      "label": "",
      "value": "7'-6\"",
      "unit": "",
      "appliesTo": "beam spacing"
    },
    {
      "label": "",
      "value": "7'-6\"",
      "unit": "",
      "appliesTo": "beam spacing"
    },
    {
      "label": "",
      "value": "7'-6\"",
      "unit": "",
      "appliesTo": "beam spacing"
    },
    {
      "label": "",
      "value": "7'-6\"",
      "unit": "",
      "appliesTo": "beam spacing"
    },
    {
      "label": "",
      "value": "7'-6\"",
      "unit": "",
      "appliesTo": "beam spacing"
    },
    {
      "label": "reinforcement spacing",
      "value": "6½\"",
      "unit": "",
      "appliesTo": "500A"
    },
    {
      "label": "interior beams",
      "value": "8¾\"",
      "unit": "",
      "appliesTo": "\"D\""
    },
    {
      "label": "exterior beams",
      "value": "9⅝\"",
      "unit": "",
      "appliesTo": "\"D\""
    }
  ],
  "notes": [
    "FLECTION, AND VERTICAL CURVE.",
    "INTAIN A CONSTANT SLAB THICKNESS OF 7¾\"",
    "TWEEN BEAMS AND 8\" IN OVERHANGS.",
    "\"D\" = 8¾\" INTERIOR BEAMS",
    "\"D\" = 9⅝\" EXTERIOR BEAMS",
    "FENCE NOT SHOWN, TYP.",
    "30-400A SPACED AS SHOWN",
    "502 AT EVERY 500A, TYP.",
    "500A AT 6½\"",
    "501 UNDER EVERY 500A",
    "6-400A AT EQ. SPS.",
    "14-400A AT EQUAL SPACES, TYP.",
    "REQUIRED CONSTRUCTION JOINT PARALLEL WITH DECK, TYP.",
    "¾\" TRIANGULAR DRIP BEAD FULL LENGTH OF BRIDGE, TYP."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU SLAB"
  ],
  "description": "This crop is a transverse section through the bridge deck slab, showing the slab over six I-shaped beams and the exterior edge barriers. It documents deck width, beam spacing, slab reinforcement callouts, slab slope and thickness, construction-joint requirement, and a typical drip bead."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "slightly sloped rectangular slab",
      "material": "",
      "count": 1,
      "note": "Shown over intermediate bents with reinforcing bars in the slab."
    },
    {
      "name": "intermediate bent",
      "tag": "",
      "shape": "tapered pedestal/column with rectangular footing",
      "material": "",
      "count": 2,
      "note": "Only two bents are visible in this section fragment."
    },
    {
      "name": "reinforcement bars",
      "tag": "58-600",
      "shape": "longitudinal bars",
      "material": "",
      "count": 58,
      "note": "Callout identifies bars between each pair of 400 bars in top of slab over intermediate bents."
    },
    {
      "name": "top slab reinforcement bars",
      "tag": "400",
      "shape": "longitudinal bars",
      "material": "",
      "count": null,
      "note": "Referenced by the 58-600 bar callout; individual bars are not otherwise tagged or countable."
    }
  ],
  "measurements": [
    {
      "label": "reinforcement bar quantity and spacing",
      "value": "58-600",
      "unit": "",
      "appliesTo": "deck slab reinforcement"
    },
    {
      "label": "top slab bar designation",
      "value": "400",
      "unit": "",
      "appliesTo": "top slab reinforcement bars"
    },
    {
      "label": "bars between each pair of 400 bars",
      "value": "2",
      "unit": "",
      "appliesTo": "58-600 deck slab reinforcement"
    }
  ],
  "notes": [
    "58-600 (2 BETWEEN EACH PAIR OF 400 BARS IN TOP OF SLAB OVER INTERMEDIATE BENTS)"
  ],
  "labels": [
    "SECTION THRU SLAB AT INTERMEDIATE BENT"
  ],
  "description": "This crop is a section through the bridge deck slab at intermediate bents. It shows the slab spanning over two visible tapered intermediate bent supports and a callout for 58-600 reinforcement located between pairs of 400 bars in the top of slab."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "slab",
      "tag": "",
      "shape": "rectangular, slightly sloping longitudinal profile",
      "material": "",
      "count": 1,
      "note": "Shown spanning over intermediate bents."
    },
    {
      "name": "intermediate bent",
      "tag": "",
      "shape": "pedestal base with tapered/haunched column",
      "material": "",
      "count": 2,
      "note": "Two bent supports are visible beneath the slab."
    },
    {
      "name": "parapet or barrier",
      "tag": "",
      "shape": "tapered vertical profile",
      "material": "",
      "count": 1,
      "note": "Visible at the left end of the slab."
    },
    {
      "name": "reinforcement bars",
      "tag": "58-600",
      "shape": "linear bars shown in slab",
      "material": "",
      "count": null,
      "note": "Callout indicates bars in the top of slab over intermediate bents."
    },
    {
      "name": "reinforcement bars",
      "tag": "400 BARS",
      "shape": "linear bars shown in slab",
      "material": "",
      "count": null,
      "note": "Referenced by the reinforcement callout."
    }
  ],
  "measurements": [
    {
      "label": "reinforcement callout",
      "value": "58-600",
      "unit": "",
      "appliesTo": "58-600 reinforcement bars"
    },
    {
      "label": "quantity between each pair of 400 bars",
      "value": "2",
      "unit": "",
      "appliesTo": "58-600 reinforcement bars"
    },
    {
      "label": "bar reference",
      "value": "400",
      "unit": "BARS",
      "appliesTo": "400 BARS"
    }
  ],
  "notes": [
    "58-600 (2 BETWEEN EACH PAIR OF 400 BARS IN TOP OF SLAB OVER INTERMEDIATE BENTS)"
  ],
  "labels": [
    "SECTION THRU SLAB AT INTERMEDIATE BENT"
  ],
  "description": "This crop is a section through the bridge slab at intermediate bents. It shows the slab supported by two visible bent profiles, with a tapered parapet or barrier profile at the left and a reinforcement callout for the top of slab over intermediate bents."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "concrete diaphragm",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "Located through beam section; labeled 10\" CONC. DIAPH."
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular fragment in section",
      "material": "",
      "count": 1,
      "note": "Only a portion of the beam section is shown."
    },
    {
      "name": "reinforcement bars",
      "tag": "507A",
      "shape": "bars",
      "material": "",
      "count": 4,
      "note": "Called out as 2-507A at the top and 2-507A at the bottom of the diaphragm."
    },
    {
      "name": "reinforcement bars",
      "tag": "402A",
      "shape": "bars",
      "material": "",
      "count": 4,
      "note": "Called out as 4-402A."
    },
    {
      "name": "reinforcement bar",
      "tag": "403A",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Called out as 403A."
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Called out as 1\" DIA. PLAIN BAR."
    }
  ],
  "measurements": [
    {
      "label": "concrete diaphragm thickness",
      "value": "10\"",
      "unit": "",
      "appliesTo": "concrete diaphragm"
    },
    {
      "label": "dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "vertical dimension",
      "value": "2'-4\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "clear cover, typical",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "concrete diaphragm reinforcement"
    },
    {
      "label": "plain bar diameter",
      "value": "1\"",
      "unit": "",
      "appliesTo": "plain bar"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-507A",
      "unit": "",
      "appliesTo": "507A"
    },
    {
      "label": "reinforcement quantity",
      "value": "4-402A",
      "unit": "",
      "appliesTo": "402A"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-507A",
      "unit": "",
      "appliesTo": "507A"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION THRU DIAPHRAGM"
    }
  ],
  "notes": [
    "SLAB REINFORCEMENT NOT SHOWN"
  ],
  "labels": [
    "TOP OF BEAM",
    "SECTION THRU DIAPHRAGM",
    "SPANS 1 AND 3",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "This crop shows a section through a 10-inch concrete diaphragm in Spans 1 and 3. It documents the diaphragm reinforcement arrangement within a partial beam section; slab reinforcement is explicitly not shown."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "diaphragm",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Sectioned rectangular diaphragm between beam outlines."
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": "Only a portion of the beam section is visible."
    },
    {
      "name": "reinforcement bar",
      "tag": "507A",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Shown as two bars at the top and two bars at the bottom of the diaphragm."
    },
    {
      "name": "reinforcement bar",
      "tag": "402A",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Diagonal bars shown within the diaphragm."
    },
    {
      "name": "reinforcement bar",
      "tag": "403A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Callout points to reinforcement within the diaphragm."
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Shown at the diaphragm center."
    }
  ],
  "measurements": [
    {
      "label": "CL. TYP.",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "diaphragm reinforcement"
    },
    {
      "label": "DIA.",
      "value": "1\"",
      "unit": "",
      "appliesTo": "plain bar"
    },
    {
      "label": "SCALE",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION THRU DIAPHRAGM"
    }
  ],
  "notes": [
    "SLAB REINFORCEMENT NOT SHOWN"
  ],
  "labels": [
    "TOP OF BEAM",
    "SECTION THRU DIAPHRAGM",
    "SPANS 1 AND 3",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "This crop shows a section through a rectangular diaphragm at the beam, for spans 1 and 3. It documents the diaphragm reinforcement callouts, including 507A, 402A, 403A, and a 1-inch diameter plain bar; slab reinforcement is not shown."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": 1,
      "note": "Supports the girder units shown below."
    },
    {
      "name": "parapet/barrier",
      "tag": "",
      "shape": "tapered vertical barrier",
      "material": "",
      "count": 2,
      "note": "Visible at the left and right edges of the section."
    },
    {
      "name": "girder units",
      "tag": "",
      "shape": "I-shaped",
      "material": "",
      "count": 5,
      "note": "Five adjacent girder sections are visible beneath the deck."
    },
    {
      "name": "reinforcement bar",
      "tag": "403A",
      "shape": "straight bar",
      "material": "",
      "count": 7,
      "note": "Shown at equal spaces."
    },
    {
      "name": "reinforcement bar",
      "tag": "507A",
      "shape": "straight bar",
      "material": "",
      "count": 2,
      "note": "Upper reinforcement callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "402A",
      "shape": "straight bar",
      "material": "",
      "count": 4,
      "note": "Internal reinforcement callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "507A",
      "shape": "straight bar",
      "material": "",
      "count": 2,
      "note": "Lower reinforcement callout."
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "straight bar",
      "material": "",
      "count": null,
      "note": "Called out as 1 inch diameter plain bar."
    }
  ],
  "measurements": [
    {
      "label": "deck cross slope",
      "value": "2%",
      "unit": "%",
      "appliesTo": "deck slab"
    },
    {
      "label": "edge spacing",
      "value": "5\"",
      "unit": "",
      "appliesTo": "403A reinforcement bar"
    },
    {
      "label": "reinforcement spacing",
      "value": "AT EQUAL SPACES",
      "unit": "",
      "appliesTo": "7-403A reinforcement bar"
    },
    {
      "label": "plain bar diameter",
      "value": "1\"",
      "unit": "",
      "appliesTo": "plain bar"
    }
  ],
  "notes": [
    "1\" DIAMETER PLAIN BAR"
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU DIAPHRAGM"
  ],
  "description": "This crop is a section titled \"SECTION THRU DIAPHRAGM\" through a bridge deck and five adjacent I-shaped girder units. It shows the sloping deck, edge barriers, diaphragm-area reinforcement callouts, and the SR 21 WB profile grade line reference."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": 1,
      "note": "Shown with 2% slope."
    },
    {
      "name": "edge barrier",
      "tag": "",
      "shape": "tapered vertical barrier",
      "material": "",
      "count": 2,
      "note": "One at each outer edge of the section."
    },
    {
      "name": "girder",
      "tag": "",
      "shape": "rectangular/bulb-ended beam sections",
      "material": "",
      "count": 5,
      "note": "Five adjacent beam sections are shown below the deck."
    },
    {
      "name": "diaphragm",
      "tag": "",
      "shape": "solid vertical web/block",
      "material": "",
      "count": null,
      "note": "Section title identifies this as a section through diaphragm; individual diaphragm elements are not clearly tagged."
    },
    {
      "name": "reinforcement bar",
      "tag": "403A",
      "shape": "linear bar",
      "material": "",
      "count": 7,
      "note": "Called out at equal spaces."
    },
    {
      "name": "reinforcement bar",
      "tag": "507A",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Two separate 2-507A callouts are shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "402A",
      "shape": "linear bar",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Called out as 1 inch diameter plain bar."
    }
  ],
  "measurements": [
    {
      "label": "deck slope",
      "value": "2%",
      "unit": "%",
      "appliesTo": "deck slab"
    },
    {
      "label": "edge spacing",
      "value": "5″",
      "unit": "",
      "appliesTo": "403A"
    },
    {
      "label": "edge spacing",
      "value": "5″",
      "unit": "",
      "appliesTo": "403A"
    },
    {
      "label": "reinforcing-bar quantity and spacing",
      "value": "7-403A",
      "unit": "",
      "appliesTo": "403A"
    },
    {
      "label": "bar diameter",
      "value": "1″",
      "unit": "",
      "appliesTo": "plain bar"
    },
    {
      "label": "reinforcing-bar quantity",
      "value": "2-507A",
      "unit": "",
      "appliesTo": "507A"
    },
    {
      "label": "reinforcing-bar quantity",
      "value": "4-402A",
      "unit": "",
      "appliesTo": "402A"
    },
    {
      "label": "reinforcing-bar quantity",
      "value": "2-507A",
      "unit": "",
      "appliesTo": "507A"
    }
  ],
  "notes": [
    "AT EQUAL SPACES",
    "1″ DIAMETER PLAIN BAR"
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU DIAPHRAGM"
  ],
  "description": "This crop is a transverse section titled \"SECTION THRU DIAPHRAGM.\" It shows a sloping bridge deck with two outer edge barriers and five adjacent beam/girder sections below, together with reinforcement callouts and the SR 21 WB profile-grade-line reference."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "continuous sloping slab",
      "material": "concrete",
      "count": 1,
      "note": "Shown spanning across the girders."
    },
    {
      "name": "I-girder",
      "tag": "",
      "shape": "I-section",
      "material": "",
      "count": 6,
      "note": "Six girder cross sections are visible."
    },
    {
      "name": "edge beam",
      "tag": "",
      "shape": "continuous beam at deck edge",
      "material": "concrete",
      "count": 2,
      "note": "Called out to be poured flush with the outside face of beam."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "tapered parapet profile",
      "material": "",
      "count": 2,
      "note": "One is shown at each outer deck edge."
    },
    {
      "name": "fence",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Not shown, typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "8-404",
      "shape": "linear",
      "material": "reinforcing steel",
      "count": 8,
      "note": "AT EQUAL SPACES."
    },
    {
      "name": "reinforcement bar",
      "tag": "1-509",
      "shape": "linear",
      "material": "reinforcing steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "1-508",
      "shape": "linear",
      "material": "reinforcing steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "1-802",
      "shape": "linear",
      "material": "reinforcing steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "1-801",
      "shape": "linear",
      "material": "reinforcing steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "2-800",
      "shape": "linear",
      "material": "reinforcing steel",
      "count": 2,
      "note": ""
    },
    {
      "name": "supporting cap or diaphragm",
      "tag": "",
      "shape": "stepped continuous member",
      "material": "",
      "count": 1,
      "note": "Unlabeled member shown below the girder bearing locations."
    }
  ],
  "measurements": [
    {
      "label": "Typical deck thickness",
      "value": "8",
      "unit": "\"",
      "appliesTo": "deck slab"
    },
    {
      "label": "Bar offset",
      "value": "2",
      "unit": "\"",
      "appliesTo": "8-404"
    },
    {
      "label": "Bar offset",
      "value": "2",
      "unit": "\"",
      "appliesTo": "8-404"
    },
    {
      "label": "Deck slope",
      "value": "2",
      "unit": "%",
      "appliesTo": "deck slab"
    },
    {
      "label": "Form removal duration",
      "value": "72",
      "unit": "HOURS",
      "appliesTo": "edge beam forms"
    },
    {
      "label": "Concrete strength age",
      "value": "28",
      "unit": "DAY",
      "appliesTo": "deck"
    }
  ],
  "notes": [
    "FENCE NOT SHOWN, TYP.",
    "POUR EDGE BEAM FLUSH WITH OUTSIDE FACE OF BEAM, TYP.",
    "NOTE: BEARING PADS NOT SHOWN",
    "DO NOT REMOVE EDGE BEAM FORMS UNTIL 72 HOURS AFTER THE DECK POUR IS COMPLETED OR DECK REACHES 28 DAY CONCRETE STRENGTH."
  ],
  "labels": [
    "SECTION THRU DIAPHRAGM",
    "SECTION THRU EDGE BEAM",
    "SR 21 WB = PGL"
  ],
  "description": "This crop shows transverse bridge section information identified as sections through a diaphragm and through an edge beam. It depicts a sloped concrete deck over six I-girders, outer edge beams/barriers, reinforcement callouts, and notes concerning omitted bearing pads and edge-beam form removal."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloped rectangular slab",
      "material": "concrete",
      "count": 1,
      "note": "Shown with a 2% cross slope."
    },
    {
      "name": "I-girder",
      "tag": "",
      "shape": "I-girder",
      "material": "",
      "count": 6,
      "note": "Six girder sections are visible below the deck."
    },
    {
      "name": "edge beam",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 2,
      "note": "Called out to be poured flush with the outside face of beam, typical."
    },
    {
      "name": "parapet/barrier",
      "tag": "",
      "shape": "tapered",
      "material": "concrete",
      "count": 2,
      "note": "One is shown at each outside edge of the deck."
    },
    {
      "name": "reinforcement bar",
      "tag": "I-509",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Leader points to reinforcement within a girder."
    },
    {
      "name": "reinforcement bar",
      "tag": "I-508",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Leader points to reinforcement within a girder."
    },
    {
      "name": "reinforcement bar",
      "tag": "I-802",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Leader points to reinforcement within a girder."
    },
    {
      "name": "reinforcement bar",
      "tag": "I-801",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Leader points to reinforcement within a girder."
    },
    {
      "name": "reinforcement bar",
      "tag": "2-800",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Leader points to reinforcement in the deck."
    },
    {
      "name": "reinforcement bar",
      "tag": "8-404",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Shown at equal spaces near the deck edge."
    }
  ],
  "measurements": [
    {
      "label": "typical deck-edge thickness",
      "value": "8\"",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "end cover/offset",
      "value": "2\"",
      "unit": "",
      "appliesTo": "8-404 reinforcement bar"
    },
    {
      "label": "reinforcement quantity and mark at equal spaces",
      "value": "8-404",
      "unit": "",
      "appliesTo": "reinforcement bar 8-404"
    },
    {
      "label": "deck cross slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "reinforcement quantity and mark",
      "value": "2-800",
      "unit": "",
      "appliesTo": "reinforcement bar 2-800"
    }
  ],
  "notes": [
    "FENCE NOT SHOWN, TYP.",
    "NOTE: BEARING PADS NOT SHOWN",
    "POUR EDGE BEAM FLUSH WITH OUTSIDE FACE OF BEAM, TYP.",
    "DO NOT REMOVE EDGE BEAM FORMS UNTIL 72 HOURS AFTER THE DECK POUR IS COMPLETED OR DECK REACHES 28 DAY CONCRETE STRENGTH."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU EDGE BEAM"
  ],
  "description": "This crop is a transverse section titled \"SECTION THRU EDGE BEAM\" through a bridge deck supported by six I-girders. It shows the sloped deck, outside edge beams and parapet/barrier profiles, along with reinforcement callouts and edge-beam forming instructions."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab section",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown spanning over two beam sections."
    },
    {
      "name": "girder/beam",
      "tag": "",
      "shape": "I-girder section",
      "material": "",
      "count": 2,
      "note": "Two beam sections are visible below the slab."
    },
    {
      "name": "barrier/parapet",
      "tag": "",
      "shape": "tapered vertical section",
      "material": "",
      "count": 1,
      "note": "Visible at the left slab edge only."
    },
    {
      "name": "reinforcement bar",
      "tag": "58-600",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Leader identifies bars in the top of slab over intermediate bents."
    },
    {
      "name": "reinforcement bar",
      "tag": "400",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Referenced as paired bars in the top of slab."
    }
  ],
  "measurements": [
    {
      "label": "quantity of 58-600 bars between each pair of 400 bars",
      "value": "2",
      "unit": "",
      "appliesTo": "58-600"
    }
  ],
  "notes": [
    "58-600 (2 BETWEEN EACH PAIR OF 400 BARS IN TOP OF SLAB OVER INTERMEDIATE BENTS)"
  ],
  "labels": [
    "SECTION THRU SLAB AT INTERMEDIATE BENT"
  ],
  "description": "This crop is a transverse section through the bridge deck slab at an intermediate bent location. It shows the slab reinforcement arrangement over two I-girder sections and a left-edge barrier/parapet section."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloped rectangular slab",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown spanning across the tops of the beams, with an overhang at the left."
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "I-girder",
      "material": "",
      "count": 3,
      "note": "Three beam portions are visible; outer beams are cropped."
    },
    {
      "name": "parapet or barrier",
      "tag": "",
      "shape": "tapered",
      "material": "",
      "count": 1,
      "note": "Located at the left slab edge; no tag is shown."
    },
    {
      "name": "fence",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Not shown; noted as typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "30-400A",
      "shape": "circular bar section",
      "material": "",
      "count": null,
      "note": "Spaced as shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "500A",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Called out at 6½ inches."
    },
    {
      "name": "reinforcement bar",
      "tag": "501",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Located under every 500A."
    },
    {
      "name": "reinforcement bar",
      "tag": "502",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "At every 500A, typical."
    }
  ],
  "measurements": [
    {
      "label": "Dimension “D” — interior beams",
      "value": "8¾″",
      "unit": "",
      "appliesTo": "interior beams"
    },
    {
      "label": "Dimension “D” — exterior beams",
      "value": "9⅛″",
      "unit": "",
      "appliesTo": "exterior beams"
    },
    {
      "label": "Constant slab thickness between beams",
      "value": "7¾″",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "Slab thickness in overhangs",
      "value": "8″",
      "unit": "",
      "appliesTo": "deck slab overhang"
    },
    {
      "label": "Horizontal dimension at left edge",
      "value": "1/2″",
      "unit": "",
      "appliesTo": "left slab-edge detail"
    },
    {
      "label": "Horizontal dimension",
      "value": "1′-8″",
      "unit": "",
      "appliesTo": "left slab-edge detail"
    },
    {
      "label": "Reinforcement spacing",
      "value": "6½″",
      "unit": "",
      "appliesTo": "500A"
    },
    {
      "label": "Slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    }
  ],
  "notes": [
    "DIMENSION “D” IS MEASURED FROM TOP OF SLAB TO TOP OF BEAMS AT CENTERLINE BEARING. VARY “D” BETWEEN BEARINGS TO COMPENSATE FOR DEAD LOAD DEFLECTION, AND VERTICAL CURVE.",
    "MAINTAIN A CONSTANT SLAB THICKNESS OF 7¾” BETWEEN BEAMS AND 8” IN THE OVERHANGS.",
    "“D” = 8¾” INTERIOR BEAMS",
    "“D” = 9⅛” EXTERIOR BEAMS",
    "FENCE NOT SHOWN, TYP.",
    "502 AT EVERY 500A, TYP.",
    "30-400A SPACED AS SHOWN",
    "500A AT 6½”",
    "501 UNDER EVERY 500A"
  ],
  "labels": [],
  "description": "This crop shows a cross section through a bridge deck slab supported on I-girders, including the left overhang and a tapered edge barrier or parapet. It documents slab thickness, variable dimension “D” at beam centerline bearings, deck slope, and reinforcement callouts."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "barrier parapet",
      "tag": "",
      "shape": "tapered concrete section with vertical outside face",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Barrier cross-section shown on a supporting slab edge."
    },
    {
      "name": "supporting deck slab edge",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Only the slab edge beneath the barrier is shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "502",
      "shape": "circular bars shown in section",
      "material": "reinforcing steel",
      "count": 12,
      "note": "Called out as 12-502 in barrier."
    },
    {
      "name": "reinforcement bar",
      "tag": "503A",
      "shape": "sloping bar",
      "material": "reinforcing steel",
      "count": null,
      "note": "Called out at 14\" spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "503B",
      "shape": "bar",
      "material": "reinforcing steel",
      "count": null,
      "note": "Called out at each 503A."
    },
    {
      "name": "drip bead",
      "tag": "",
      "shape": "triangular",
      "material": "",
      "count": 2,
      "note": "Specified both sides for the full length of bridge."
    }
  ],
  "measurements": [
    {
      "label": "minimum lap",
      "value": "2'-2\"",
      "unit": "",
      "appliesTo": "503A and 503B"
    },
    {
      "label": "taper at end post",
      "value": "0\"",
      "unit": "",
      "appliesTo": "barrier parapet"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-9 1/2\"",
      "unit": "",
      "appliesTo": "barrier parapet"
    },
    {
      "label": "horizontal dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "barrier parapet"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "barrier parapet"
    },
    {
      "label": "clearance",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "barrier parapet"
    },
    {
      "label": "clearance",
      "value": "3\"",
      "unit": "",
      "appliesTo": "barrier parapet"
    },
    {
      "label": "barrier height",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": "barrier parapet"
    },
    {
      "label": "clearance, two sides",
      "value": "2\"",
      "unit": "",
      "appliesTo": "barrier parapet"
    },
    {
      "label": "503A spacing",
      "value": "14\"",
      "unit": "",
      "appliesTo": "503A"
    },
    {
      "label": "reinforcement quantity",
      "value": "12-502",
      "unit": "",
      "appliesTo": "502"
    },
    {
      "label": "drip bead size",
      "value": "3/4\"",
      "unit": "",
      "appliesTo": "drip bead"
    },
    {
      "label": "horizontal dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "supporting deck slab edge"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "Barrier Detail"
    }
  ],
  "notes": [
    "NOTE: LAP 503A AND 503B BARS A MINIMUM OF 2'-2\"",
    "* TAPERS TO 0\" AT END POST",
    "FENCE NOT SHOWN, TYP.",
    "503B AT EACH 503A",
    "2\" CL., TWO SIDES",
    "12-502 IN BARRIER, SEE DECK PLAN FOR LETTER DESIGNATION",
    "503A AT 14\"",
    "3/4\" TRIANGULAR DRIP BEAD, FULL LENGTH OF BRIDGE BOTH SIDES"
  ],
  "labels": [
    "BARRIER DETAIL",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "This crop shows a transverse barrier detail at the bridge deck edge, including the tapered barrier profile and its supporting slab edge. It documents barrier reinforcement, cover/clearance dimensions, drip bead requirements, and a note for a fence that is not shown."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "endwall",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Two endwall callouts are shown: 3'-0\" ENDWALL and 1'-6\" ENDWALL."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": 1,
      "note": "Deck is shown with a 2% slope."
    },
    {
      "name": "girder",
      "tag": "",
      "shape": "I-girder",
      "material": "",
      "count": null,
      "note": "Multiple longitudinal I-girder profiles are shown; the drawing note states certain bar series are not shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "4-900A",
      "shape": "linear",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "4-900B",
      "shape": "linear",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": null,
      "note": "Shown at the endwall and noted as typical."
    },
    {
      "name": "preformed foam joint filler",
      "tag": "",
      "shape": "rectangular pad",
      "material": "",
      "count": null,
      "note": "Around pad, typical."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "linear joint",
      "material": "",
      "count": 1,
      "note": "Required parallel with deck, typical."
    }
  ],
  "measurements": [
    {
      "label": "horizontal dimension",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "horizontal dimension",
      "value": "1'-8\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "horizontal dimension",
      "value": "34'-0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "horizontal dimension",
      "value": "6'-8\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "horizontal dimension",
      "value": "1'-1\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "vertical dimension",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "deck slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "gap, minimum",
      "value": "1\"",
      "unit": "",
      "appliesTo": "construction joint"
    },
    {
      "label": "preformed joint filler thickness",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "endwall dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "endwall dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "preformed foam joint filler thickness",
      "value": "1\"",
      "unit": "",
      "appliesTo": "preformed foam joint filler"
    }
  ],
  "notes": [
    "REQUIRED CONSTRUCTION JOINT PARALLEL WITH DECK, TYP.",
    "1\" GAP, MIN.",
    "1/2\" PREFORMED JOINT FILLER",
    "1/2\" PREFORMED JOINT FILLER, TYP.",
    "1\" PREFORMED FOAM JOINT FILLER AROUND PAD, TYP.",
    "NOTE: BARS 401, 504 SERIES, 505, AND 506 SERIES NOT SHOWN"
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU ENDWALL"
  ],
  "description": "This crop shows a longitudinal section titled SECTION THRU ENDWALL, including the sloped deck, longitudinal I-girder profiles, endwalls, and jointing at the deck end. It documents endwall dimensions, deck slope, reinforcement callouts, and required construction and filler-joint provisions."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "endwall",
      "tag": "",
      "shape": "stepped rectangular section with tapered outer face",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Section at endwall; End Bent 1 shown and End Bent 4 similar."
    },
    {
      "name": "slab",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Slab reinforcement not shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "506B",
      "shape": "bent bar",
      "material": "reinforcing steel",
      "count": 5,
      "note": "Placed at 18\" ±, alternating to give 9\" spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "506A",
      "shape": "bent bar",
      "material": "reinforcing steel",
      "count": null,
      "note": "Placed at 18\"."
    },
    {
      "name": "reinforcement bar",
      "tag": "900",
      "shape": "bar",
      "material": "reinforcing steel",
      "count": 4,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "504B",
      "shape": "bent bar",
      "material": "reinforcing steel",
      "count": 8,
      "note": "Between beams."
    },
    {
      "name": "reinforcement bar",
      "tag": "504A",
      "shape": "bar",
      "material": "reinforcing steel",
      "count": 2,
      "note": "At end of beam."
    },
    {
      "name": "reinforcement bar",
      "tag": "401",
      "shape": "bent bar",
      "material": "reinforcing steel",
      "count": 4,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "505",
      "shape": "bent bar",
      "material": "reinforcing steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "horizontal strip",
      "material": "",
      "count": 1,
      "note": "Located at the slab/endwall interface."
    },
    {
      "name": "waterproofing",
      "tag": "",
      "shape": "layer",
      "material": "",
      "count": 1,
      "note": "See Section 530 of the Georgia DOT Specifications."
    }
  ],
  "measurements": [
    {
      "label": "horizontal dimension",
      "value": "12\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "radius",
      "value": "1/4\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "bar spacing",
      "value": "18\" ±",
      "unit": "",
      "appliesTo": "506B"
    },
    {
      "label": "alternating spacing",
      "value": "9\"",
      "unit": "",
      "appliesTo": "506B"
    },
    {
      "label": "minimum clear cover",
      "value": "3 1/2\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "bar spacing",
      "value": "18\"",
      "unit": "",
      "appliesTo": "506A"
    },
    {
      "label": "vertical dimension",
      "value": "10\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "vertical dimension",
      "value": "9\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "vertical dimension",
      "value": "12\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "clear cover",
      "value": "2\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "vertical dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "vertical dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "slab"
    },
    {
      "label": "vertical dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "bar spacing",
      "value": "12\" ±",
      "unit": "",
      "appliesTo": "504B"
    },
    {
      "label": "joint filler thickness",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION AT ENDWALL"
    }
  ],
  "notes": [
    "5 506B AT 18\" ±, ALT. TO GIVE 9\" SP.",
    "3 1/2\" MIN. CL.",
    "506A AT 18\"",
    "2\" CL. 3 SIDES",
    "8-504B AT 12\" ± BETWEEN BEAMS",
    "2-504A AT END OF BEAM",
    "1/2\" PREFORMED JOINT FILLER",
    "BEARING PAD NOT SHOWN",
    "WATERPROOFING, SEE SECTION 530 OF THE GEORGIA DOT SPECIFICATIONS",
    "SLAB REINFORCEMENT NOT SHOWN"
  ],
  "labels": [
    "SECTION AT ENDWALL",
    "END BENT 1 SHOWN",
    "END BENT 4 SIMILAR",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "This crop is a sectional reinforcement and interface detail titled SECTION AT ENDWALL. It shows the endwall profile, adjacent slab interface, reinforcement callouts, joint filler, waterproofing callout, and a bearing-pad note; End Bent 1 is shown and End Bent 4 is noted as similar."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "endwall",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": "Two endwall dimensions are called out: 3'-0\" and 1'-6\"."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": 1,
      "note": "Shown with 2% slope."
    },
    {
      "name": "reinforcement bar",
      "tag": "4-900A",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Bar callout shown within section."
    },
    {
      "name": "reinforcement bar",
      "tag": "4-900B",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Bar callout shown at both ends of the section."
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "strip",
      "material": "preformed joint filler",
      "count": null,
      "note": "Called out as typical."
    },
    {
      "name": "preformed foam joint filler",
      "tag": "",
      "shape": "pad",
      "material": "foam",
      "count": null,
      "note": "Around pad, typical."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Required construction joint parallel with deck, typical."
    }
  ],
  "measurements": [
    {
      "label": "dimension",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "dimension",
      "value": "1'-8\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "dimension",
      "value": "34'-0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "dimension",
      "value": "6'-8\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "dimension",
      "value": "1'-1\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "vertical dimension",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "deck slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "gap, minimum",
      "value": "1\"",
      "unit": "",
      "appliesTo": "construction joint"
    },
    {
      "label": "preformed joint filler thickness",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "endwall dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "preformed joint filler thickness",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "endwall dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "preformed foam joint filler thickness",
      "value": "1\"",
      "unit": "",
      "appliesTo": "preformed foam joint filler"
    }
  ],
  "notes": [
    "REQUIRED CONSTRUCTION JOINT PARALLEL WITH DECK, TYP.",
    "1\" GAP, MIN.",
    "1/2\" PREFORMED JOINT FILLER",
    "1/2\" PREFORMED JOINT FILLER, TYP.",
    "1\" PREFORMED FOAM JOINT FILLER AROUND PAD, TYP.",
    "NOTE: BARS 401, 504 SERIES, 505, AND 506 SERIES NOT SHOWN"
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU ENDWALL (partial)"
  ],
  "description": "This crop shows a section through an endwall, including a sloped deck slab, endwall profiles, joint filler, and reinforcing-bar callouts. The section is referenced to SR 21 WB = PGL and includes construction-joint and foam-filler requirements."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "concrete barrier",
      "tag": "",
      "shape": "tapered vertical barrier with rectangular base",
      "material": "",
      "count": 1,
      "note": "Barrier cross-section detail; tapers to 0\" at end post."
    },
    {
      "name": "reinforcement bar",
      "tag": "503A",
      "shape": "sloping straight bar",
      "material": "",
      "count": null,
      "note": "Shown in barrier; callout states 503A at 14\"."
    },
    {
      "name": "reinforcement bar",
      "tag": "503B",
      "shape": "straight bar",
      "material": "",
      "count": null,
      "note": "Callout states 503B at each 503A."
    },
    {
      "name": "reinforcement bar",
      "tag": "502",
      "shape": "straight bar",
      "material": "",
      "count": 12,
      "note": "Called out as 12-502 in barrier; see deck plan for letter designation."
    },
    {
      "name": "triangular drip bead",
      "tag": "",
      "shape": "triangular",
      "material": "",
      "count": null,
      "note": "Full length of bridge, both sides."
    }
  ],
  "measurements": [
    {
      "label": "minimum lap of 503A and 503B bars",
      "value": "2'-2\"",
      "unit": "",
      "appliesTo": "503A and 503B"
    },
    {
      "label": "overall top horizontal dimension",
      "value": "1'-9½\"",
      "unit": "",
      "appliesTo": "concrete barrier"
    },
    {
      "label": "dimension marked with asterisk",
      "value": "8\"*",
      "unit": "",
      "appliesTo": "concrete barrier"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "concrete barrier"
    },
    {
      "label": "clearance",
      "value": "1½\"",
      "unit": "",
      "appliesTo": "fence not shown"
    },
    {
      "label": "clearance",
      "value": "3\"",
      "unit": "",
      "appliesTo": "concrete barrier"
    },
    {
      "label": "barrier height",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": "concrete barrier"
    },
    {
      "label": "clearance, two sides",
      "value": "2\"",
      "unit": "",
      "appliesTo": "concrete barrier"
    },
    {
      "label": "spacing",
      "value": "14\"",
      "unit": "",
      "appliesTo": "503A"
    },
    {
      "label": "triangular drip bead size",
      "value": "3/4\"",
      "unit": "",
      "appliesTo": "triangular drip bead"
    },
    {
      "label": "horizontal dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "concrete barrier"
    },
    {
      "label": "drawing scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "Barrier Detail"
    }
  ],
  "notes": [
    "NOTE: LAP 503A AND 503B BARS A MINIMUM OF 2'-2\"",
    "* TAPERS TO 0\" AT END POST",
    "FENCE NOT SHOWN, TYP.",
    "503B AT EACH 503A",
    "2\" CL., TWO SIDES",
    "12-502 IN BARRIER, SEE DECK PLAN FOR LETTER DESIGNATION",
    "3/4\" TRIANGULAR DRIP BEAD, FULL LENGTH OF BRIDGE BOTH SIDES"
  ],
  "labels": [
    "BARRIER DETAIL",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "This crop shows a barrier cross-section reinforcement detail, including a tapered barrier profile and its base. It documents 503A and 503B reinforcement, 12-502 bars in the barrier, fence clearance, and a triangular drip bead along both sides of the bridge."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "endwall",
      "tag": "",
      "shape": "stepped rectangular section with sloped face",
      "material": "",
      "count": 1,
      "note": "Section at endwall."
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular section, partially shown",
      "material": "",
      "count": 1,
      "note": "End-of-beam reinforcement callouts are shown."
    },
    {
      "name": "slab",
      "tag": "",
      "shape": "rectangular section",
      "material": "",
      "count": 1,
      "note": "Slab reinforcement not shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "506B",
      "shape": "bent bar",
      "material": "",
      "count": null,
      "note": "Placed alternately."
    },
    {
      "name": "reinforcement bar",
      "tag": "506A",
      "shape": "bent bar",
      "material": "",
      "count": null,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "504B",
      "shape": "straight bar",
      "material": "",
      "count": 8,
      "note": "Between beams."
    },
    {
      "name": "reinforcement bar",
      "tag": "504A",
      "shape": "straight bar",
      "material": "",
      "count": 2,
      "note": "At end of beam."
    },
    {
      "name": "reinforcement bar",
      "tag": "900",
      "shape": "straight bar",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "505",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "401",
      "shape": "bent bar",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "thin rectangular layer",
      "material": "preformed joint filler",
      "count": 1,
      "note": "Located between the endwall and slab."
    },
    {
      "name": "waterproofing",
      "tag": "",
      "shape": "layer",
      "material": "",
      "count": null,
      "note": "See Section 530 of the Georgia DOT Specifications."
    }
  ],
  "measurements": [
    {
      "label": "horizontal dimension",
      "value": "12”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "horizontal dimension",
      "value": "1’-6”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "horizontal dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "radius",
      "value": "1/4”",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "506B spacing",
      "value": "18” ±",
      "unit": "",
      "appliesTo": "506B"
    },
    {
      "label": "alternate spacing",
      "value": "9”",
      "unit": "",
      "appliesTo": "506B"
    },
    {
      "label": "minimum clearance",
      "value": "3 1/2”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "vertical dimension",
      "value": "10”",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "vertical dimension",
      "value": "9”",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "vertical dimension",
      "value": "12”",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "clear cover",
      "value": "2”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "506A spacing",
      "value": "18”",
      "unit": "",
      "appliesTo": "506A"
    },
    {
      "label": "vertical dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "504B spacing",
      "value": "12” ±",
      "unit": "",
      "appliesTo": "504B"
    },
    {
      "label": "vertical dimension",
      "value": "1’-0”",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "vertical dimension",
      "value": "1’-0”",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "joint filler thickness",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "scale",
      "value": "3/4” = 1’-0”",
      "unit": "",
      "appliesTo": "SECTION AT ENDWALL"
    }
  ],
  "notes": [
    "506B AT 18” ±, ALT. TO GIVE 9” SP.",
    "3 1/2” MIN. CL.",
    "2” CL. 3 SIDES",
    "8-504B AT 12” ± BETWEEN BEAMS",
    "2-504A AT END OF BEAM",
    "WATERPROOFING, SEE SECTION 530 OF THE GEORGIA DOT SPECIFICATIONS",
    "1/2” PREFORMED JOINT FILLER",
    "BEARING PAD NOT SHOWN",
    "SLAB REINFORCEMENT NOT SHOWN",
    "END BENT 1 SHOWN END BENT 4 SIMILAR"
  ],
  "labels": [
    "1-505",
    "4-401",
    "4-900",
    "SECTION AT ENDWALL",
    "SCALE: 3/4” = 1’-0”"
  ],
  "description": "This crop is a sectional reinforcement and joint detail titled SECTION AT ENDWALL. It shows the endwall adjacent to the end of a beam and slab, including reinforcing-bar callouts, waterproofing, and a preformed joint filler. The detail states that End Bent 1 is shown and End Bent 4 is similar."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "reinforcement bars",
      "tag": "NO. 4 BARS",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Minimum lap length specified."
    },
    {
      "name": "reinforcement bars",
      "tag": "NO. 5 BARS",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Minimum lap length specified."
    },
    {
      "name": "reinforcement bars",
      "tag": "NO. 9 BARS",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Minimum lap length specified."
    }
  ],
  "measurements": [
    {
      "label": "Minimum lap length",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "NO. 4 BARS"
    },
    {
      "label": "Minimum lap length",
      "value": "2'-2\"",
      "unit": "",
      "appliesTo": "NO. 5 BARS"
    },
    {
      "label": "Minimum lap length",
      "value": "4'-0\"",
      "unit": "",
      "appliesTo": "NO. 9 BARS"
    }
  ],
  "notes": [
    "NOTE:",
    "MINIMUM LAP LENGTH AS FOLLOWS:",
    "NO. 4 BARS = 2'-0\"",
    "NO. 5 BARS = 2'-2\"",
    "NO. 9 BARS = 4'-0\""
  ],
  "labels": [],
  "description": "This crop is a reinforcement note giving minimum lap lengths for No. 4, No. 5, and No. 9 reinforcing bars. No structural member or substructure element is shown in this crop."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "edge beam",
      "tag": "",
      "shape": "stepped rectangular section",
      "material": "",
      "count": 1,
      "note": "Shown in SECTION THRU EDGE BEAM."
    },
    {
      "name": "concrete diaphragm",
      "tag": "",
      "shape": "rectangular vertical diaphragm",
      "material": "concrete",
      "count": 1,
      "note": "Shown in SECTION THRU DIAPHRAGM, SPAN 2."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "horizontal rectangular section",
      "material": "",
      "count": 2,
      "note": "Slab reinforcement is noted as not shown."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "vertical joint",
      "material": "",
      "count": null,
      "note": "Required construction joint is shown at the edge beam and in Detail “A”."
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "vertical strip",
      "material": "",
      "count": 1,
      "note": "Called out as 1” preformed joint filler."
    },
    {
      "name": "silicone sealant joint sealer",
      "tag": "",
      "shape": "recessed joint seal",
      "material": "silicone sealant",
      "count": 1,
      "note": "Shown in Detail “A”."
    },
    {
      "name": "reinforcement bar",
      "tag": "506A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Spaced at 18”."
    },
    {
      "name": "reinforcement bar",
      "tag": "800",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Two bars called out in the edge-beam section."
    },
    {
      "name": "reinforcement bar",
      "tag": "508",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "509",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "801",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "802",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "404",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "403B",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "402B",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Called out as 4-402B."
    },
    {
      "name": "reinforcement bar",
      "tag": "507B",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Two 507B bars are called out at the upper location and two at the lower location."
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Called out as 1” DIA. PLAIN BAR."
    }
  ],
  "measurements": [
    {
      "label": "reinforcement spacing",
      "value": "18”",
      "unit": "",
      "appliesTo": "506A"
    },
    {
      "label": "horizontal dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "edge beam"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0 1/2”",
      "unit": "",
      "appliesTo": "edge beam construction joint"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0 1/2”",
      "unit": "",
      "appliesTo": "edge beam construction joint"
    },
    {
      "label": "horizontal dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "edge beam"
    },
    {
      "label": "clear cover",
      "value": "4”",
      "unit": "",
      "appliesTo": "800 reinforcement bar"
    },
    {
      "label": "vertical dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "edge beam"
    },
    {
      "label": "clear cover",
      "value": "1 1/2”",
      "unit": "",
      "appliesTo": "edge beam reinforcement"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0”",
      "unit": "",
      "appliesTo": "edge beam construction joint"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0”",
      "unit": "",
      "appliesTo": "edge beam construction joint"
    },
    {
      "label": "preformed joint filler thickness",
      "value": "1”",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "concrete diaphragm thickness",
      "value": "10”",
      "unit": "",
      "appliesTo": "concrete diaphragm"
    },
    {
      "label": "vertical dimension",
      "value": "2”",
      "unit": "",
      "appliesTo": "diaphragm section"
    },
    {
      "label": "vertical dimension",
      "value": "3'-0”",
      "unit": "",
      "appliesTo": "diaphragm section"
    },
    {
      "label": "clear cover",
      "value": "1 1/2”",
      "unit": "",
      "appliesTo": "diaphragm reinforcement"
    },
    {
      "label": "plain bar diameter",
      "value": "1”",
      "unit": "",
      "appliesTo": "plain bar"
    },
    {
      "label": "joint-sealer detail dimension",
      "value": "1/4”",
      "unit": "",
      "appliesTo": "silicone sealant joint sealer"
    },
    {
      "label": "joint-sealer detail dimension",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "silicone sealant joint sealer"
    },
    {
      "label": "joint width",
      "value": "3/4”",
      "unit": "",
      "appliesTo": "construction joint"
    },
    {
      "label": "radius",
      "value": "1/4” R",
      "unit": "",
      "appliesTo": "Detail “A”"
    },
    {
      "label": "scale",
      "value": "3/4” = 1'-0”",
      "unit": "",
      "appliesTo": "SECTION THRU EDGE BEAM"
    },
    {
      "label": "scale",
      "value": "3/4” = 1'-0”",
      "unit": "",
      "appliesTo": "SECTION THRU DIAPHRAGM"
    }
  ],
  "notes": [
    "SEE DETAIL “A”",
    "REQ'D. CONST. JOINT",
    "* 1” PREFORMED JOINT FILLER",
    "BEARING PADS NOT SHOWN",
    "SLAB REINFORCEMENT NOT SHOWN",
    "TOP OF BEAM",
    "SILICONE SEALANT TYPE JOINT SEALER (TYPE B, C OR D)",
    "ROUND TO 1/4” R",
    "REQUIRED CONST. JOINT., TYP."
  ],
  "labels": [
    "SR 21/MILLEN BYPASS",
    "CONSTRUCTION",
    "SYMMETRY",
    "SECTION THRU EDGE BEAM",
    "BENT 2 SHOWN",
    "BENT 3 SIMILAR",
    "SECTION THRU DIAPHRAGM",
    "SPAN 2",
    "DETAIL “A”",
    "NO SCALE"
  ],
  "description": "This crop shows a section through an edge beam for Bent 2, with Bent 3 noted similar, and a separate section through a 10-inch concrete diaphragm in Span 2. It also includes Detail “A” for the required construction-joint sealant and joint-filler arrangement, together with reinforcement callouts for the edge beam and diaphragm."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": 1,
      "note": "Deck surface is shown with a 2% slope."
    },
    {
      "name": "edge beam",
      "tag": "",
      "shape": "thickened slab edge",
      "material": "",
      "count": 2,
      "note": "Shown at both outside girder lines; callout directs edge beam pour flush with outside face of beam."
    },
    {
      "name": "I-girder",
      "tag": "",
      "shape": "I-girder",
      "material": "",
      "count": 6,
      "note": "Six girder sections are visible below the deck."
    },
    {
      "name": "parapet/barrier",
      "tag": "",
      "shape": "tapered",
      "material": "",
      "count": 2,
      "note": "Tall tapered elements are shown at the two deck edges; fence is noted as not shown."
    },
    {
      "name": "supporting cap/seat",
      "tag": "",
      "shape": "stepped rectangular",
      "material": "",
      "count": 1,
      "note": "Continuous supporting member shown beneath the girders; bearing pads are noted as not shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "8-404",
      "shape": "straight",
      "material": "",
      "count": 8,
      "note": "At equal spaces near the deck edge."
    },
    {
      "name": "reinforcement bar",
      "tag": "1-508",
      "shape": "straight",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "1-509",
      "shape": "straight",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "1-802",
      "shape": "straight",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "1-801",
      "shape": "straight",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "2-800",
      "shape": "straight",
      "material": "",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "edge distance",
      "value": "2″",
      "unit": "",
      "appliesTo": "8-404"
    },
    {
      "label": "spacing",
      "value": "AT EQUAL SPACES",
      "unit": "",
      "appliesTo": "8-404"
    },
    {
      "label": "edge distance",
      "value": "2″",
      "unit": "",
      "appliesTo": "8-404"
    },
    {
      "label": "deck slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "edge beam form removal time",
      "value": "72",
      "unit": "HOURS",
      "appliesTo": "edge beam"
    },
    {
      "label": "concrete strength reference age",
      "value": "28",
      "unit": "DAY",
      "appliesTo": "deck pour"
    }
  ],
  "notes": [
    "FENCE NOT SHOWN, TYP.",
    "POUR EDGE BEAM FLUSH WITH OUTSIDE FACE OF BEAM, TYP.",
    "NOTE: BEARING PADS NOT SHOWN",
    "DO NOT REMOVE EDGE BEAM FORMS UNTIL 72 HOURS AFTER THE DECK POUR IS COMPLETED OR DECK REACHES 28 DAY CONCRETE STRENGTH.",
    "NOTE:",
    "SECTIONS SHOWN ARE FOR LEFT BRID... (partial)"
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU EDGE BEAM"
  ],
  "description": "This crop is a transverse section titled SECTION THRU EDGE BEAM. It shows a sloped bridge deck supported on six I-girders, with thickened edge beams at the exterior girder lines and tapered edge barriers/parapets. Reinforcement callouts and deck-edge construction/form-removal notes are included."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab with overhangs",
      "material": "",
      "count": 1,
      "note": "Slab is shown spanning six beams."
    },
    {
      "name": "beam",
      "tag": "CL BEAM 1 through CL BEAM 6",
      "shape": "I-girder",
      "material": "",
      "count": 6,
      "note": "Beam centerlines are individually identified as BEAM 1 through BEAM 6."
    },
    {
      "name": "fence",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Not shown; noted as typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "502",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Called out at every 500A, typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "500A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Shown in slab reinforcement callouts."
    },
    {
      "name": "reinforcement bar",
      "tag": "400B AND C",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Called out at equal spaces and as spaced as shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "506A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Visible only in the partial detail at the right edge of the crop."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "vertical joint",
      "material": "",
      "count": 1,
      "note": "Required construction joint parallel with deck, typical."
    },
    {
      "name": "triangular drip bead",
      "tag": "",
      "shape": "triangular",
      "material": "",
      "count": 1,
      "note": "Called out full length of bridge, typical."
    }
  ],
  "measurements": [
    {
      "label": "Dimension “D” at interior beams",
      "value": "8¾”",
      "unit": "",
      "appliesTo": "interior beams"
    },
    {
      "label": "Dimension “D” at exterior beams",
      "value": "9¼”",
      "unit": "",
      "appliesTo": "exterior beams"
    },
    {
      "label": "Slab thickness between beams",
      "value": "7¾”",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "Slab thickness in overhangs",
      "value": "8”",
      "unit": "",
      "appliesTo": "deck slab overhangs"
    },
    {
      "label": "Out to out",
      "value": "43’-7”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Gutter to gutter",
      "value": "40’-0”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Left edge offset",
      "value": "1/2”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Left offset",
      "value": "1’-8”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Right offset",
      "value": "1’-8”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Right edge offset",
      "value": "1/2”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Dimension to SR 21 WB = PGL",
      "value": "34’-0”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Dimension from SR 21 WB = PGL",
      "value": "6’-0”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Dimension to centerline",
      "value": "22’-0”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Slab slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "Clear cover",
      "value": "2¼”",
      "unit": "",
      "appliesTo": "deck slab reinforcement"
    },
    {
      "label": "Clear cover",
      "value": "1”",
      "unit": "",
      "appliesTo": "deck slab reinforcement"
    },
    {
      "label": "Minimum dimension, typical",
      "value": "3’-0” MIN.",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Typical slab edge dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "Construction joint offset",
      "value": "3”",
      "unit": "",
      "appliesTo": "construction joint"
    },
    {
      "label": "Triangular drip bead",
      "value": "3/4”",
      "unit": "",
      "appliesTo": "triangular drip bead"
    },
    {
      "label": "500A spacing",
      "value": "6¾”",
      "unit": "",
      "appliesTo": "500A"
    },
    {
      "label": "End reinforcement spacing",
      "value": "4⅜”",
      "unit": "",
      "appliesTo": "400B AND C"
    },
    {
      "label": "Typical reinforcement spacing",
      "value": "3”",
      "unit": "",
      "appliesTo": "400B AND C"
    },
    {
      "label": "Outside beam centerline to edge",
      "value": "3’-0½”",
      "unit": "",
      "appliesTo": "CL BEAM 1 and CL BEAM 6"
    },
    {
      "label": "Beam centerline spacing",
      "value": "7’-6”",
      "unit": "",
      "appliesTo": "CL BEAM 1 through CL BEAM 6"
    },
    {
      "label": "Partial right-side detail horizontal dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Partial right-side detail vertical dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "506A spacing",
      "value": "18”",
      "unit": "",
      "appliesTo": "506A"
    }
  ],
  "notes": [
    "DIMENSION “D” IS MEASURED FROM TOP OF SLAB TO TOP OF BEAMS AT CENTERLINE BEARING. VARY “D” BETWEEN BEARINGS TO COMPENSATE FOR DEAD LOAD DEFLECTION, AND VERTICAL CURVE. MAINTAIN A CONSTANT SLAB THICKNESS OF 7¾” BETWEEN BEAMS AND 8” IN THE OVERHANGS.",
    "FENCE NOT SHOWN, TYP.",
    "REQUIRED CONSTRUCTION JOINT PARALLEL WITH DECK, TYP.",
    "3/4” TRIANGULAR DRIP BEAD FULL LENGTH OF BRIDGE, TYP."
  ],
  "labels": [
    "SECTION THRU SLAB",
    "SR 21 WB = PGL",
    "OUT TO OUT",
    "GUTTER TO GUTTER",
    "SEE DETAIL “A”",
    "I-801",
    "I-802"
  ],
  "description": "This crop shows a transverse section through a bridge deck slab supported by six I-girders, identified from CL BEAM 1 through CL BEAM 6. It documents slab thickness and slope, beam spacing, slab reinforcement callouts, edge construction-joint and drip-bead details; a separate detail is only partially visible at the right edge."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "edge beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown in section at left."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Slab reinforcement is noted as not shown."
    },
    {
      "name": "concrete diaphragm",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "Shown in section at right."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "vertical joint",
      "material": "",
      "count": 2,
      "note": "Required construction joint is indicated in the edge-beam section and Detail \"A\"."
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 1,
      "note": "Called out as 1\" preformed joint filler."
    },
    {
      "name": "silicone sealant / type joint sealer",
      "tag": "",
      "shape": "joint sealant bead",
      "material": "silicone",
      "count": 1,
      "note": "Shown in Detail \"A\"; type B, C or D."
    },
    {
      "name": "bearing pads",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Not shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "506A",
      "shape": "bent bar",
      "material": "",
      "count": null,
      "note": "Called out at 18\"."
    },
    {
      "name": "reinforcement bar",
      "tag": "2-800",
      "shape": "bent bar",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "508",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "509",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "I-801",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "I-802",
      "shape": "bent bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "404",
      "shape": "straight bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "2-507B",
      "shape": "bar group",
      "material": "",
      "count": 4,
      "note": "Two groups are called out in the diaphragm section."
    },
    {
      "name": "reinforcement bar",
      "tag": "403B",
      "shape": "bar",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "4-402B",
      "shape": "bar group",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "straight bar",
      "material": "",
      "count": 1,
      "note": "Called out as 1\" diameter plain bar."
    }
  ],
  "measurements": [
    {
      "label": "reinforcement spacing",
      "value": "18\"",
      "unit": "",
      "appliesTo": "506A"
    },
    {
      "label": "horizontal dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0½\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0½\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "horizontal dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "clear cover",
      "value": "4\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "vertical dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "clear cover, 3 sides",
      "value": "1½\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "edge beam section"
    },
    {
      "label": "preformed joint filler thickness",
      "value": "1\"",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "concrete diaphragm thickness",
      "value": "10\"",
      "unit": "",
      "appliesTo": "concrete diaphragm"
    },
    {
      "label": "vertical dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "diaphragm section"
    },
    {
      "label": "vertical dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "diaphragm section"
    },
    {
      "label": "clear cover, typical",
      "value": "1½\"",
      "unit": "",
      "appliesTo": "diaphragm section"
    },
    {
      "label": "plain bar diameter",
      "value": "1\"",
      "unit": "",
      "appliesTo": "plain bar"
    },
    {
      "label": "sealant/joint dimension",
      "value": "¼\"",
      "unit": "",
      "appliesTo": "Detail \"A\""
    },
    {
      "label": "sealant/joint dimension",
      "value": "½\"",
      "unit": "",
      "appliesTo": "Detail \"A\""
    },
    {
      "label": "joint dimension",
      "value": "¾\"",
      "unit": "",
      "appliesTo": "Detail \"A\""
    },
    {
      "label": "radius",
      "value": "¼\"",
      "unit": "",
      "appliesTo": "Detail \"A\""
    },
    {
      "label": "scale",
      "value": "¾\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION THRU EDGE BEAM"
    },
    {
      "label": "scale",
      "value": "¾\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION THRU DIAPHRAGM"
    }
  ],
  "notes": [
    "SLAB REINFORCEMENT NOT SHOWN",
    "* 1\" PREFORMED JOINT FILLER",
    "BEARING PADS NOT SHOWN",
    "BENT 2 SHOWN",
    "BENT 3 SIMILAR",
    "SILICONE SEALANT TYPE JOINT SEALER (TYPE B, C OR D)",
    "ROUND TO 1/4\" R",
    "REQUIRED CONST. JOINT., TYP."
  ],
  "labels": [
    "℄ SR 21/MILLEN BYPASS",
    "= ℄ CONSTRUCTION",
    "= ℄ SYMMETRY",
    "℄ REQ'D. CONST. JOINT",
    "SEE DETAIL \"A\"",
    "TOP OF BEAM",
    "SECTION THRU EDGE BEAM",
    "SECTION THRU DIAPHRAGM",
    "SPAN 2",
    "DETAIL \"A\"",
    "NO SCALE"
  ],
  "description": "This crop contains a section through an edge beam for Bent 2, with Bent 3 noted similar, and a section through a concrete diaphragm at Span 2. It also includes Detail \"A\" showing the required construction-joint sealant and joint-filler arrangement, together with reinforcement callouts for the edge beam and diaphragm."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": 1,
      "note": "Carries the SR 21 WB = PGL line and a 2% cross slope."
    },
    {
      "name": "barrier/parapet",
      "tag": "",
      "shape": "tapered upright",
      "material": "",
      "count": 2,
      "note": "One is shown at each outer deck edge."
    },
    {
      "name": "girder",
      "tag": "",
      "shape": "I-section",
      "material": "",
      "count": 6,
      "note": "Girder cross-sections are shown supporting the deck."
    },
    {
      "name": "diaphragm",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 5,
      "note": "Diaphragms are shown between adjacent girders."
    },
    {
      "name": "reinforcing bars",
      "tag": "7-403B",
      "shape": "linear",
      "material": "",
      "count": 7,
      "note": "At equal spaces; 5 in. is shown at each end of the indicated bar group."
    },
    {
      "name": "reinforcing bars",
      "tag": "2-507B",
      "shape": "linear",
      "material": "",
      "count": 4,
      "note": "Two separate callouts are shown, each marked 2-507B."
    },
    {
      "name": "reinforcing bars",
      "tag": "4-402B",
      "shape": "linear",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "plain bar",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Called out as 1 in. diameter plain bar."
    }
  ],
  "measurements": [
    {
      "label": "deck cross slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "end spacing",
      "value": "5″",
      "unit": "",
      "appliesTo": "7-403B"
    },
    {
      "label": "end spacing",
      "value": "5″",
      "unit": "",
      "appliesTo": "7-403B"
    },
    {
      "label": "plain bar diameter",
      "value": "1″",
      "unit": "",
      "appliesTo": "plain bar"
    }
  ],
  "notes": [
    "1″ DIAMETER PLAIN BAR",
    "FENCE NOT SHOWN, TYP.",
    "FENCE NOT SHOWN, TYP."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU DIAPHRAGM"
  ],
  "description": "This crop shows a transverse section through bridge diaphragms, with six I-section girders and five diaphragm spans beneath a sloping deck slab. Reinforcement callouts are shown within the diaphragm arrangement, with edge barriers/parapets at both outer deck edges."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloped rectangular slab",
      "material": "concrete",
      "count": 1,
      "note": "Slab is shown with a 2% cross slope."
    },
    {
      "name": "edge beam",
      "tag": "",
      "shape": "rectangular longitudinal beam",
      "material": "concrete",
      "count": 2,
      "note": "Exterior edge beams are visible at both sides of the deck."
    },
    {
      "name": "concrete barrier/parapet",
      "tag": "",
      "shape": "tapered solid barrier",
      "material": "concrete",
      "count": 2,
      "note": "One is visible at each exterior deck edge; shown only partially at the top of the crop."
    },
    {
      "name": "I-girder",
      "tag": "",
      "shape": "I-section",
      "material": "",
      "count": 6,
      "note": "Six girder cross-sections are visible beneath the deck."
    },
    {
      "name": "pier cap",
      "tag": "",
      "shape": "stepped rectangular cap",
      "material": "",
      "count": 1,
      "note": "Continuous support cap is shown below the girder ends; bearing pads are noted as not shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "1-508",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 1,
      "note": "Callout points to upper reinforcement at the left side of the section."
    },
    {
      "name": "reinforcement bar",
      "tag": "1-509",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 1,
      "note": "Callout points to upper reinforcement near the right side of the section."
    },
    {
      "name": "reinforcement bar",
      "tag": "2-800",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 2,
      "note": "Callout points to top reinforcement at the right exterior edge."
    },
    {
      "name": "reinforcement bar",
      "tag": "1-802",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 1,
      "note": "Callout points to lower reinforcement at the left side of the section."
    },
    {
      "name": "reinforcement bar",
      "tag": "1-801",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 1,
      "note": "Callout points to lower reinforcement near the right side of the section."
    }
  ],
  "measurements": [
    {
      "label": "reinforcement callout at equal spaces",
      "value": "8-404",
      "unit": "",
      "appliesTo": "deck slab reinforcement"
    },
    {
      "label": "end dimension, left",
      "value": "2\"",
      "unit": "",
      "appliesTo": "deck slab/edge beam"
    },
    {
      "label": "end dimension, right",
      "value": "2\"",
      "unit": "",
      "appliesTo": "deck slab/edge beam"
    },
    {
      "label": "deck cross slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    }
  ],
  "notes": [
    "NOTE: BEARING PADS NOT SHOWN",
    "POUR EDGE BEAM FLUSH WITH OUTSIDE FACE OF BEAM, TYP.",
    "DO NOT REMOVE EDGE BEAM FORMS UNTIL 72 HOURS AFTER THE DECK POUR IS COMPLETED OR DECK REACHES 28 DAY CONCRETE STRENGTH."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU EDGE BEAM",
    "AT EQUAL SPACES"
  ],
  "description": "This crop shows a cross section through the bridge exterior edge beam and deck, supported by six visible I-girders on a stepped support cap. It documents deck reinforcement callouts, deck cross slope, exterior barriers, edge-beam placement, and form-removal requirements."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "diaphragm bar",
      "tag": "",
      "shape": "cylindrical threaded bar",
      "material": "plain bar",
      "count": 1,
      "note": "Threaded 5\" on each end; excess bar is cut off 1\" from beam face."
    },
    {
      "name": "washer",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Shown at diaphragm bar end; specified as 1/4\" x 3 1/2\" diameter."
    },
    {
      "name": "hex nut",
      "tag": "",
      "shape": "hexagonal",
      "material": "",
      "count": 1,
      "note": "Shown at diaphragm bar end."
    },
    {
      "name": "diaphragm bar recess",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "5\" DIA. recess shown at beam face."
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Only a local portion at the diaphragm bar end is shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "4-#5I",
      "shape": "linear",
      "material": "",
      "count": 4,
      "note": "Callout reads \"4-#5I AT 4\" EACH WAY\"; final character of bar designation is unclear."
    }
  ],
  "measurements": [
    {
      "label": "Centerline dimension",
      "value": "1\"",
      "unit": "",
      "appliesTo": "diaphragm bar / beam detail"
    },
    {
      "label": "Dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "diaphragm bar recess detail"
    },
    {
      "label": "Hole diameter",
      "value": "2\"",
      "unit": "",
      "appliesTo": "hole"
    },
    {
      "label": "Recess diameter",
      "value": "5\"",
      "unit": "",
      "appliesTo": "diaphragm bar recess"
    },
    {
      "label": "Reinforcement spacing",
      "value": "4\"",
      "unit": "",
      "appliesTo": "4-#5I reinforcement bar"
    },
    {
      "label": "Diaphragm bar diameter",
      "value": "1\"",
      "unit": "",
      "appliesTo": "diaphragm bar"
    },
    {
      "label": "Threaded length on each end",
      "value": "5\"",
      "unit": "",
      "appliesTo": "diaphragm bar"
    },
    {
      "label": "Washer thickness",
      "value": "1/4\"",
      "unit": "",
      "appliesTo": "washer"
    },
    {
      "label": "Washer diameter",
      "value": "3 1/2\"",
      "unit": "",
      "appliesTo": "washer"
    },
    {
      "label": "Cutoff distance from beam face",
      "value": "1\"",
      "unit": "",
      "appliesTo": "diaphragm bar"
    }
  ],
  "notes": [
    "DIAPHRAGM BAR SHALL BE A 1” DIAMETER PLAIN BAR, THREADED 5” ON EACH END, WITH 1/4” X 3 1/2” DIAMETER WASHERS AND HEX NUTS (ASTM A 709 GRADE 36).",
    "TIGHTEN DIAPHRAGM BAR AS PER SUB-SECTION 507.3.05.C OF THE GEORGIA DOT SPECIFICATIONS.",
    "AFTER EXCESS DIAPHRAGM BAR HAS BEEN CUT OFF, PAINT DIAPHRAGM BAR, WASHER, AND NUT EXPOSED IN RECESS WITH SPECIAL PROTECTIVE COATING NO. 2 P AS PER SECTION 535 OF THE GEORGIA DOT SPECIFICATIONS. AFTER PAINTING, FILL THE RECESS WITH AN APPROVED EPOXY GROUT.",
    "GALVANIZING OF THE DIAPHRAGM BAR AS PER SUB-SECTION 865.2.01.B.12 OF THE GEORGIA DOT SPECIFICATIONS IS NOT REQUIRED."
  ],
  "labels": [
    "RECESS DETAIL FOR DIAPHRAGM BAR ENDS",
    "2” DIAMETER HOLE",
    "4-#5I AT 4” EACH WAY",
    "CUT OFF EXCESS DIAPHRAGM BAR 1” FROM BEAM FACE."
  ],
  "description": "This crop is a recess detail for diaphragm bar ends at a beam face. It shows the local diaphragm bar, threaded end, washer and hex nut arrangement within a circular recess, together with installation, coating, and grout notes."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "girder",
      "tag": "65I",
      "shape": "I-girder profile with tapered transitions between flanges and web",
      "material": "",
      "count": 1,
      "note": "End section shown; embedded circular reinforcement/strand ends are depicted."
    },
    {
      "name": "reinforcement/strand ends",
      "tag": "8-45I",
      "shape": "circular ends in section",
      "material": "",
      "count": null,
      "note": "Callout leader points to upper circular ends."
    },
    {
      "name": "reinforcement/strand ends",
      "tag": "2-450",
      "shape": "circular ends in section",
      "material": "",
      "count": null,
      "note": "Callout leader points to upper circular ends."
    },
    {
      "name": "reinforcement/strand ends",
      "tag": "350",
      "shape": "circular ends in section",
      "material": "",
      "count": null,
      "note": "Callout leader points to circular ends at the tapered lower portion."
    },
    {
      "name": "reinforcement/strand ends",
      "tag": "2-452",
      "shape": "circular ends in section",
      "material": "",
      "count": null,
      "note": "Callout leader points to lower circular ends."
    }
  ],
  "measurements": [
    {
      "label": "",
      "value": "2″",
      "unit": "",
      "appliesTo": "Horizontal dimension between indicated vertical lines at upper portion of girder"
    },
    {
      "label": "",
      "value": "1 1/8″ CL.",
      "unit": "",
      "appliesTo": "Indicated centerline/clearance at girder web"
    },
    {
      "label": "",
      "value": "1′-3″",
      "unit": "",
      "appliesTo": "Vertical dimension between indicated horizontal reference lines at lower girder portion"
    },
    {
      "label": "",
      "value": "2″ CL.",
      "unit": "",
      "appliesTo": "Indicated centerline/clearance at bottom of girder"
    }
  ],
  "notes": [
    "CE UNLESS OTHERWISE SHOWN. (partial)",
    "TRESSED STRANDS. (partial)"
  ],
  "labels": [
    "GDOT",
    "P.I. NO.",
    "0019181",
    "SECTION AT END"
  ],
  "description": "This crop shows an end section of a girder with an I-shaped profile, tapered flange transitions, and circular embedded reinforcement or strand ends. It includes strand/reinforcement callouts, cover or centerline dimensions, and a partial note referring to prestressed strands."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "beam",
      "tag": "",
      "shape": "I-girder",
      "material": "",
      "count": null,
      "note": "Two sectional representations are shown: section at midpoint and section at end."
    },
    {
      "name": "prestressed strands",
      "tag": "",
      "shape": "circular",
      "material": "prestressed steel",
      "count": null,
      "note": "Solid-dot symbol is defined as 1/2 in. diameter prestressed strands."
    },
    {
      "name": "reinforcement bar",
      "tag": "550",
      "shape": "bent",
      "material": "",
      "count": null,
      "note": "Shown at top of midpoint section."
    },
    {
      "name": "reinforcement bar",
      "tag": "651",
      "shape": "bent",
      "material": "",
      "count": null,
      "note": "Shown at top of end section."
    },
    {
      "name": "reinforcement bar",
      "tag": "451",
      "shape": "",
      "material": "",
      "count": 8,
      "note": "Callout at end section."
    },
    {
      "name": "reinforcement bar",
      "tag": "450",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Callout at end section."
    },
    {
      "name": "reinforcement bar",
      "tag": "452",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Callout at end section."
    },
    {
      "name": "reinforcement bar",
      "tag": "350",
      "shape": "bent trapezoidal",
      "material": "",
      "count": null,
      "note": "Reinforcement bending diagram shown."
    }
  ],
  "measurements": [
    {
      "label": "top width",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "horizontal dimension",
      "value": "5\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "horizontal dimension",
      "value": "2 1/2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "web width",
      "value": "6\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "horizontal dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "horizontal dimension",
      "value": "6\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "vertical segment",
      "value": "6\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "vertical segment",
      "value": "3\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "vertical segment",
      "value": "1'-3\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "vertical segment",
      "value": "6\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "vertical segment",
      "value": "6\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "overall depth",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "bottom vertical dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "spacing",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "spacing",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "spacing",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "spacing arrangement",
      "value": "7 SPACES AT 2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "bottom width",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "horizontal dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "clearance",
      "value": "1 1/8\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "clearance",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "end-section depth",
      "value": "1'-3\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "clearance",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "bar 350 diagonal leg",
      "value": "1'-1\"",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "bar 350 angle",
      "value": "45°",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "bar 350 width",
      "value": "1'-3\"",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "bar 350 dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "minimum clearance",
      "value": "1\"",
      "unit": "",
      "appliesTo": "prestressed strands"
    },
    {
      "label": "strand diameter",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "prestressed strands"
    },
    {
      "label": "bar 550 and 651 bend angle",
      "value": "90°",
      "unit": "",
      "appliesTo": "550, 651"
    },
    {
      "label": "bar 350 lap minimum",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "partial reinforcement dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "partial reinforcement dimension",
      "value": "5'-0\"",
      "unit": "",
      "appliesTo": ""
    }
  ],
  "notes": [
    "MAINTAIN 1\" MINIMUM CLEARANCE UNLESS OTHERWISE SHOWN.",
    "• INDICATES 1/2\" DIAMETER PRESTRESSED STRANDS.",
    "ALL BAR DIMENSIONS ARE OUT TO OUT.",
    "AT THE TOP OF THE BEAM, BARS 550 AND 651 SHALL BE FIELD BENT OR SHOP BENT 90°, SUCH THAT THE HORIZONTAL LEG EXTENDS BETWEEN TOP AND BOTTOM MATS OF SLAB REINFORCEMENT.",
    "SLIGHTLY SHIFT OR SLOPE BARS 451 TO AVOID CONFLICT WITH STRANDS.",
    "BARS 350 MAY BE FABRICATED IN TWO PARTS BY LAPPING HORIZONTAL SECTION BY 1'-0\" MINIMUM.",
    "PLACE BARS 452 WITH OPEN ENDS AWAY FROM BEAM ENDS."
  ],
  "labels": [
    "SECTION AT MIDPOINT",
    "SECTION AT END",
    "REINFORCEMENT",
    "P.I. NO.",
    "0019181",
    "ALL DIMENSIONS ARE ALONG ℄ BEAM",
    "2-651 AT EACH LOCATION",
    "2 SPACES AT 2\"",
    "7 SPACES AT 2\""
  ],
  "description": "This crop shows cross sections of a beam at its midpoint and end, including the beam profile, prestressed-strand locations, and reinforcing-bar callouts. A reinforcement panel below includes the bar 350 bending shape and fabrication and placement notes; lower reinforcement details are only partially visible."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "reinforcement bar",
      "tag": "350",
      "shape": "trapezoidal bent bar with sloped sides",
      "material": "",
      "count": null,
      "note": "45° bends typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "351",
      "shape": "straight",
      "material": "",
      "count": null,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "450",
      "shape": "straight",
      "material": "",
      "count": null,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "451",
      "shape": "straight",
      "material": "",
      "count": null,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "452",
      "shape": "open rectangular bent bar",
      "material": "",
      "count": null,
      "note": "Open ends are to be placed away from beam ends."
    },
    {
      "name": "reinforcement bar",
      "tag": "550",
      "shape": "L-shaped bent bar",
      "material": "",
      "count": null,
      "note": "To be field bent or shop bent 90° at top of beam."
    },
    {
      "name": "reinforcement bar",
      "tag": "651",
      "shape": "L-shaped bent bar",
      "material": "",
      "count": null,
      "note": "To be field bent or shop bent 90° at top of beam."
    }
  ],
  "measurements": [
    {
      "label": "bar sloping leg length, typical",
      "value": "1'-1\"",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "bend angle, typical",
      "value": "45°",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "bar width",
      "value": "1'-3\"",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "bar leg dimension, typical",
      "value": "3\"",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "bar length",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "351"
    },
    {
      "label": "bar length",
      "value": "9\"",
      "unit": "",
      "appliesTo": "450"
    },
    {
      "label": "bar length",
      "value": "5'-0\"",
      "unit": "",
      "appliesTo": "451"
    },
    {
      "label": "bar leg dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "452"
    },
    {
      "label": "bar width",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "452"
    },
    {
      "label": "bar leg length",
      "value": "4'-1\"",
      "unit": "",
      "appliesTo": "550"
    },
    {
      "label": "bar width",
      "value": "9\"",
      "unit": "",
      "appliesTo": "550"
    },
    {
      "label": "bar leg length",
      "value": "4'-1\"",
      "unit": "",
      "appliesTo": "651"
    },
    {
      "label": "bar width",
      "value": "6\"",
      "unit": "",
      "appliesTo": "651"
    },
    {
      "label": "shop bend angle",
      "value": "90°",
      "unit": "",
      "appliesTo": "550, 651"
    },
    {
      "label": "minimum lap length",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "350"
    }
  ],
  "notes": [
    "ALL BAR DIMENSIONS ARE OUT TO OUT.",
    "AT THE TOP OF THE BEAM, BARS 550 AND 651 SHALL BE FIELD BENT OR SHOP BENT 90° SUCH THAT THE HORIZONTAL LEG EXTENDS BETWEEN TOP AND BOTTOM MATS OF SLAB REINFORCEMENT.",
    "SLIGHTLY SHIFT OR SLOPE BARS 451 TO AVOID CONFLICT WITH STRANDS.",
    "BARS 350 MAY BE FABRICATED IN TWO PARTS BY LAPPING HORIZONTAL SECTION BY 1'-0\" MINIMUM.",
    "PLACE BARS 452 WITH OPEN ENDS AWAY FROM BEAM ENDS."
  ],
  "labels": [
    "REINFORCEMENT",
    "SECTION AT MID POINT",
    "SECTION AT END",
    "BRIDGE NO. LT. AND RT."
  ],
  "description": "This crop is a reinforcement bar detail block showing bar shapes 350, 351, 450, 451, 452, 550, and 651. It documents dimensions and fabrication/placement notes for beam and slab reinforcement, including special bending requirements for bars 550 and 651."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "diaphragm bar",
      "tag": "",
      "shape": "cylindrical plain bar, threaded at end",
      "material": "",
      "count": 1,
      "note": "Bar end shown in recess detail."
    },
    {
      "name": "washer",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Washer shown at the diaphragm bar end."
    },
    {
      "name": "hex nut",
      "tag": "",
      "shape": "hexagonal",
      "material": "",
      "count": 1,
      "note": "Nut shown at the diaphragm bar end."
    },
    {
      "name": "recess",
      "tag": "",
      "shape": "rectangular section with circular opening",
      "material": "",
      "count": 1,
      "note": "Recess at beam face for diaphragm bar end."
    },
    {
      "name": "hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Called out as 2” DIAMETER HOLE."
    },
    {
      "name": "reinforcement bars",
      "tag": "",
      "shape": "circular in section",
      "material": "",
      "count": null,
      "note": "Callout reads partial/uncertain: “4-#5I AT 4” EACH WAY.”"
    },
    {
      "name": "beam face",
      "tag": "",
      "shape": "rectangular section",
      "material": "",
      "count": 1,
      "note": "Excess diaphragm bar is to be cut off from this face."
    }
  ],
  "measurements": [
    {
      "label": "CL.",
      "value": "1”",
      "unit": "",
      "appliesTo": "recess detail"
    },
    {
      "label": "",
      "value": "3”",
      "unit": "",
      "appliesTo": "recess detail"
    },
    {
      "label": "DIAMETER HOLE",
      "value": "2”",
      "unit": "",
      "appliesTo": "hole"
    },
    {
      "label": "AT",
      "value": "4”",
      "unit": "",
      "appliesTo": "reinforcement bars"
    },
    {
      "label": "DIA.",
      "value": "5”",
      "unit": "",
      "appliesTo": "recess"
    },
    {
      "label": "CUT OFF EXCESS DIAPHRAGM BAR FROM BEAM FACE",
      "value": "1”",
      "unit": "",
      "appliesTo": "diaphragm bar"
    },
    {
      "label": "DIAPHRAGM BAR DIAMETER",
      "value": "1”",
      "unit": "",
      "appliesTo": "diaphragm bar"
    },
    {
      "label": "THREADED ON EACH END",
      "value": "5”",
      "unit": "",
      "appliesTo": "diaphragm bar"
    },
    {
      "label": "WASHER THICKNESS",
      "value": "1/4”",
      "unit": "",
      "appliesTo": "washer"
    },
    {
      "label": "WASHER DIAMETER",
      "value": "3 1/2”",
      "unit": "",
      "appliesTo": "washer"
    }
  ],
  "notes": [
    "DIAPHRAGM BAR SHALL BE A 1” DIAMETER PLAIN BAR, THREADED 5” ON EACH END, WITH 1/4” X 3 1/2” DIAMETER WASHERS AND HEX NUTS (ASTM A 709 GRADE 36).",
    "TIGHTEN DIAPHRAGM BAR AS PER SUB-SECTION 507.3.05.C OF THE GEORGIA DOT SPECIFICATIONS.",
    "AFTER EXCESS DIAPHRAGM BAR HAS BEEN CUT OFF, PAINT DIAPHRAGM BAR, WASHER, AND NUT EXPOSED IN RECESS WITH SPECIAL PROTECTIVE COATING NO. 2 P AS PER SECTION 535 OF THE GEORGIA DOT SPECIFICATIONS. AFTER PAINTING, FILL THE RECESS WITH AN APPROVED EPOXY GROUT.",
    "GALVANIZING OF THE DIAPHRAGM BAR AS PER SUB-SECTION 865.2.01.B.12 OF THE GEORGIA DOT SPECIFICATIONS IS NOT REQUIRED."
  ],
  "labels": [
    "RECESS DETAIL FOR DIAPHRAGM BAR ENDS"
  ],
  "description": "This crop is a recess detail for an end of a diaphragm bar at a beam face. It shows the threaded bar, washer, hex nut, hole and recess geometry, with installation, coating, grout, and galvanizing requirements."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "prestressed concrete beam",
      "tag": "",
      "shape": "I-shaped",
      "material": "prestressed concrete",
      "count": 1,
      "note": "End cross section shown."
    },
    {
      "name": "reinforcement bars",
      "tag": "8-#5",
      "shape": "circular bar sections",
      "material": "steel",
      "count": 8,
      "note": "Callout points to upper-flange reinforcement."
    },
    {
      "name": "reinforcement bars",
      "tag": "2-#5",
      "shape": "circular bar sections",
      "material": "steel",
      "count": 2,
      "note": "Upper-flange callout at right."
    },
    {
      "name": "reinforcement bar",
      "tag": "#5",
      "shape": "circular bar section",
      "material": "steel",
      "count": null,
      "note": "Leader points to reinforcement in the lower sloping portion of the section."
    },
    {
      "name": "reinforcement bars",
      "tag": "2-#5",
      "shape": "circular bar sections",
      "material": "steel",
      "count": 2,
      "note": "Callout at bottom of section."
    },
    {
      "name": "prestressing strands",
      "tag": "",
      "shape": "circular strand sections",
      "material": "steel",
      "count": null,
      "note": "Filled circular sections are shown; associated cropped note reads \"STRESSED STRANDS.\""
    }
  ],
  "measurements": [
    {
      "label": "top cover/offset dimension",
      "value": "2″",
      "unit": "",
      "appliesTo": "upper-flange reinforcement"
    },
    {
      "label": "centerline offset",
      "value": "1 1/8″ CL.",
      "unit": "",
      "appliesTo": "prestressed concrete beam"
    },
    {
      "label": "vertical depth dimension",
      "value": "1′-3″",
      "unit": "",
      "appliesTo": "prestressed concrete beam"
    },
    {
      "label": "bottom cover dimension",
      "value": "2″ CL.",
      "unit": "",
      "appliesTo": "bottom reinforcement"
    },
    {
      "label": "reinforcement quantity",
      "value": "8",
      "unit": "",
      "appliesTo": "8-#5 reinforcement bars"
    },
    {
      "label": "reinforcement quantity",
      "value": "2",
      "unit": "",
      "appliesTo": "2-#5 reinforcement bars"
    },
    {
      "label": "reinforcement quantity",
      "value": "2",
      "unit": "",
      "appliesTo": "2-#5 reinforcement bars at bottom"
    }
  ],
  "notes": [
    "NCE UNLESS OTHERWISE SHOWN.",
    "STRESSED STRANDS."
  ],
  "labels": [
    "GDOT",
    "P.I. NO.",
    "0019181",
    "SECTION AT END"
  ],
  "description": "This crop shows an end cross section of a prestressed concrete I-shaped beam, including reinforcing-bar and prestressing-strand locations. The lower portion contains partial general notes and the underlined title \"SECTION AT END.\""
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "prestressed concrete beam",
      "tag": "",
      "shape": "I-shaped with flared top and bottom bulbs",
      "material": "prestressed concrete",
      "count": null,
      "note": "Two sectional conditions are shown: midpoint and end."
    },
    {
      "name": "prestressed strands",
      "tag": "",
      "shape": "circular",
      "material": "prestressed steel",
      "count": null,
      "note": "Shown as solid dots; drawing note identifies them as 1/2\" diameter prestressed strands."
    },
    {
      "name": "reinforcing bar",
      "tag": "550",
      "shape": "bent bar",
      "material": "",
      "count": null,
      "note": "Top-of-beam bar."
    },
    {
      "name": "reinforcing bar",
      "tag": "651",
      "shape": "bent bar",
      "material": "",
      "count": null,
      "note": "Top-of-beam bar."
    },
    {
      "name": "reinforcing bar",
      "tag": "451",
      "shape": "bent bar",
      "material": "",
      "count": 8,
      "note": "Shown at beam end."
    },
    {
      "name": "reinforcing bar",
      "tag": "450",
      "shape": "bent bar",
      "material": "",
      "count": 2,
      "note": "Shown at beam end."
    },
    {
      "name": "reinforcing bar",
      "tag": "452",
      "shape": "U-shaped bent bar",
      "material": "",
      "count": 2,
      "note": "Shown at beam end and in partial adjacent drawing."
    },
    {
      "name": "reinforcing bar",
      "tag": "350",
      "shape": "trapezoidal bent bar",
      "material": "",
      "count": null,
      "note": "Reinforcement detail is shown."
    }
  ],
  "measurements": [
    {
      "label": "top width",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "horizontal dimension",
      "value": "5\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "vertical dimension",
      "value": "2 1/2\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "web width",
      "value": "6\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "horizontal dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "vertical dimension",
      "value": "6\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "vertical dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "vertical dimension",
      "value": "1'-3\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "overall depth",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "vertical dimension",
      "value": "6\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "vertical dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "spacing",
      "value": "2 SPACES AT 2\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "spacing",
      "value": "7 SPACES AT 2\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "side dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "overall bottom width",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "beam section at midpoint"
    },
    {
      "label": "horizontal dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam section at end"
    },
    {
      "label": "clearance",
      "value": "1 1/8\" CL.",
      "unit": "",
      "appliesTo": "beam section at end"
    },
    {
      "label": "depth",
      "value": "1'-3\"",
      "unit": "",
      "appliesTo": "beam section at end"
    },
    {
      "label": "clearance",
      "value": "2\" CL.",
      "unit": "",
      "appliesTo": "beam section at end"
    },
    {
      "label": "quantity",
      "value": "8",
      "unit": "",
      "appliesTo": "bar 451"
    },
    {
      "label": "quantity",
      "value": "2",
      "unit": "",
      "appliesTo": "bar 450"
    },
    {
      "label": "quantity",
      "value": "2",
      "unit": "",
      "appliesTo": "bar 452"
    },
    {
      "label": "dimension",
      "value": "1'-1\" TYP.",
      "unit": "",
      "appliesTo": "bar 350"
    },
    {
      "label": "angle",
      "value": "45° TYP.",
      "unit": "",
      "appliesTo": "bar 350"
    },
    {
      "label": "vertical dimension",
      "value": "3\" TYP.",
      "unit": "",
      "appliesTo": "bar 350"
    },
    {
      "label": "width",
      "value": "1'-3\"",
      "unit": "",
      "appliesTo": "bar 350"
    },
    {
      "label": "minimum clearance",
      "value": "1\"",
      "unit": "",
      "appliesTo": "prestressed strands"
    },
    {
      "label": "strand diameter",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "prestressed strands"
    },
    {
      "label": "minimum lap",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "bar 350"
    },
    {
      "label": "dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "partial reinforcement detail at bottom of crop"
    },
    {
      "label": "dimension",
      "value": "5'-0\"",
      "unit": "",
      "appliesTo": "partial reinforcement detail at bottom of crop"
    },
    {
      "label": "dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "partial adjacent drawing at left"
    },
    {
      "label": "dimension",
      "value": "2 1/2\"",
      "unit": "",
      "appliesTo": "partial adjacent drawing at left"
    },
    {
      "label": "dimension",
      "value": "6 3/16\"",
      "unit": "",
      "appliesTo": "partial adjacent drawing at left"
    },
    {
      "label": "dimension",
      "value": "3/16\"",
      "unit": "",
      "appliesTo": "partial adjacent drawing at left"
    },
    {
      "label": "quantity",
      "value": "2",
      "unit": "",
      "appliesTo": "bar 651"
    },
    {
      "label": "quantity",
      "value": "2",
      "unit": "",
      "appliesTo": "bar 452"
    }
  ],
  "notes": [
    "ALL DIMENSIONS ARE ALONG ℄ BEAM",
    "MAINTAIN 1\" MINIMUM CLEARANCE UNLESS OTHERWISE SHOWN.",
    "• INDICATES 1/2\" DIAMETER PRESTRESSED STRANDS.",
    "ALL BAR DIMENSIONS ARE OUT TO OUT.",
    "AT THE TOP OF THE BEAM, BARS 550 AND 651 SHALL BE FIELD BENT OR SHOP BENT 90°, SUCH THAT THE HORIZONTAL LEG EXTENDS BETWEEN THE TOP AND BOTTOM MATS OF SLAB REINFORCEMENT.",
    "SLIGHTLY SHIFT OR SLOPE BARS 451 TO AVOID CONFLICT WITH STRANDS.",
    "BARS 350 MAY BE FABRICATED IN TWO PARTS BY LAPPING HORIZONTAL SECTION BY 1'-0\" MINIMUM.",
    "PLACE BARS 452 WITH OPEN ENDS AWAY FROM BEAM ENDS."
  ],
  "labels": [
    "℄ BENT",
    "SECTION AT MIDPOINT",
    "SECTION AT END",
    "REINFORCEMENT",
    "P.I. NO.",
    "0019181",
    "GDT"
  ],
  "description": "This crop shows cross sections of a prestressed concrete beam at the midpoint and at the end, including the beam profile, prestressed strand locations, and reinforcement callouts. A reinforcement block provides the bar 350 shape and notes governing bars 350, 451, 452, 550, and 651. Partial dimensions and callouts from an adjacent drawing are visible along the left edge and at the bottom of the crop."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "beam",
      "tag": "",
      "shape": "I-girder with widened top and bottom flanges and tapered web transitions",
      "material": "",
      "count": 1,
      "note": "One complete section at midpoint is shown; an adjacent section is only partially visible at right."
    },
    {
      "name": "prestressed strand",
      "tag": "",
      "shape": "circular dot markers in beam section",
      "material": "",
      "count": 20,
      "note": "Count is from the complete midpoint section only; note identifies each dot as a 1/2” diameter prestressed strand."
    },
    {
      "name": "reinforcement bar",
      "tag": "5-#5",
      "shape": "",
      "material": "",
      "count": 5,
      "note": "Callout points to reinforcement near the upper portion of the complete section."
    },
    {
      "name": "reinforcement bar",
      "tag": "3-#5",
      "shape": "",
      "material": "",
      "count": 3,
      "note": "Callout is shown on the partial section at right."
    },
    {
      "name": "reinforcement bar",
      "tag": "8-#5",
      "shape": "",
      "material": "",
      "count": 8,
      "note": "Callout is shown on the partial section at right."
    }
  ],
  "measurements": [
    {
      "label": "top width",
      "value": "1’-0”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "horizontal offset",
      "value": "5”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "upper vertical depth",
      "value": "2½”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "web width/offset",
      "value": "6”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "horizontal offset",
      "value": "3”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "horizontal offset",
      "value": "6”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "vertical segment",
      "value": "6”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "vertical segment",
      "value": "3”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "vertical segment",
      "value": "1’-3”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "vertical segment",
      "value": "6”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "vertical segment",
      "value": "6”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "overall depth",
      "value": "3’-0”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "bottom vertical depth",
      "value": "3”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "bottom side offset",
      "value": "2”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "strand spacing",
      "value": "2 SPACES AT 2”",
      "unit": "",
      "appliesTo": "prestressed strand"
    },
    {
      "label": "strand spacing",
      "value": "7 SPACES AT 2”",
      "unit": "",
      "appliesTo": "prestressed strand"
    },
    {
      "label": "bottom side offset",
      "value": "2”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "bottom width",
      "value": "1’-6”",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "horizontal centerline dimension",
      "value": "1/8” CL.",
      "unit": "",
      "appliesTo": "partial section at right"
    },
    {
      "label": "vertical centerline dimension",
      "value": "2” CL.",
      "unit": "",
      "appliesTo": "partial section at right"
    },
    {
      "label": "horizontal offset",
      "value": "2”",
      "unit": "",
      "appliesTo": "partial section at right"
    },
    {
      "label": "prestressed strand diameter",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "prestressed strand"
    },
    {
      "label": "minimum clearance",
      "value": "1”",
      "unit": "",
      "appliesTo": "prestressed strand"
    }
  ],
  "notes": [
    "MAINTAIN 1” MINIMUM CLEARANCE UNLESS OTHE... [partial]",
    "● INDICATES 1/2” DIAMETER PRESTRESSED STRAND"
  ],
  "labels": [
    "DIMENSIONS ALONG ℄ BEAM",
    "SECTION AT MIDPOINT",
    "SECTION A... [partial]",
    "ATION [partial]"
  ],
  "description": "The crop shows a complete cross section titled SECTION AT MIDPOINT for an I-shaped beam, including its outline, dimensions, prestressed-strand dot pattern, and reinforcement callout. A second beam section is partially visible at the right, with additional reinforcement callouts and centerline dimensions."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "Reinforcement bar",
      "tag": "350",
      "shape": "bent angular bar",
      "material": "reinforcing steel",
      "count": 1,
      "note": "Bar-bending detail; 45° bends shown typical."
    },
    {
      "name": "Reinforcement bar",
      "tag": "351",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "Reinforcement bar",
      "tag": "450",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "Reinforcement bar",
      "tag": "451",
      "shape": "straight",
      "material": "reinforcing steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "Reinforcement bar",
      "tag": "452",
      "shape": "U-shaped",
      "material": "reinforcing steel",
      "count": 1,
      "note": "Open-ended bar shape shown."
    },
    {
      "name": "Reinforcement bar",
      "tag": "550",
      "shape": "L-shaped",
      "material": "reinforcing steel",
      "count": 1,
      "note": "90° bent bar shape shown."
    },
    {
      "name": "Reinforcement bar",
      "tag": "651",
      "shape": "L-shaped",
      "material": "reinforcing steel",
      "count": 1,
      "note": "90° bent bar shape shown."
    }
  ],
  "measurements": [
    {
      "label": "Diagonal leg length, TYP.",
      "value": "1'-11\"",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "Width",
      "value": "1'-3\"",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "Bend angle, TYP.",
      "value": "45°",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "Offset, TYP.",
      "value": "3\"",
      "unit": "",
      "appliesTo": "350"
    },
    {
      "label": "Length",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "351"
    },
    {
      "label": "Length",
      "value": "9\"",
      "unit": "",
      "appliesTo": "450"
    },
    {
      "label": "Length",
      "value": "5'-0\"",
      "unit": "",
      "appliesTo": "451"
    },
    {
      "label": "Leg dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "452"
    },
    {
      "label": "Width",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "452"
    },
    {
      "label": "Vertical leg length",
      "value": "4'-11\"",
      "unit": "",
      "appliesTo": "550"
    },
    {
      "label": "Horizontal leg length",
      "value": "9\"",
      "unit": "",
      "appliesTo": "550"
    },
    {
      "label": "Vertical leg length",
      "value": "4'-11\"",
      "unit": "",
      "appliesTo": "651"
    },
    {
      "label": "Horizontal leg length",
      "value": "6\"",
      "unit": "",
      "appliesTo": "651"
    },
    {
      "label": "Minimum lap length",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "350"
    }
  ],
  "notes": [
    "ALL BAR DIMENSIONS ARE OUT TO OUT.",
    "AT THE TOP OF THE BEAM, BARS 550 AND 651 SHALL BE FIELD BENT OR SHOP BENT 90°, SUCH THAT THE HORIZONTAL LEG EXTENDS BETWEEN TOP AND BOTTOM MATS OF SLAB REINFORCEMENT.",
    "SLIGHTLY SHIFT OR SLOPE BARS 451 TO AVOID CONFLICT WITH STRANDS.",
    "BARS 350 MAY BE FABRICATED IN TWO PARTS BY LAPPING HORIZONTAL SECTION BY 1'-0\" MINIMUM.",
    "PLACE BARS 452 WITH OPEN ENDS AWAY FROM BEAM ENDS."
  ],
  "labels": [
    "SECTION AT MIDPOINT",
    "SECTION AT END",
    "REINFORCEMENT",
    "BRIDGE NO. 1 LT. AND RT."
  ],
  "description": "This crop shows a reinforcement bar-bending detail panel with bar marks 350, 351, 450, 451, 452, 550, and 651. It documents the illustrated bar shapes and dimensions, together with placement, bending, and lap-splice notes for beam and slab reinforcement."
}