Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Pile Cap

1 page · 2 crops · ×4 · foundation

Matched toPile Capbridge.foundation_system.deep_foundation.pile_capon “Pile Cap”

1 read off the drawings · 5 not established
The class asks forValueHowFrom
LengthLwants m/mmnot establishedNeither elevation provides a dimension explicitly applying to the pile cap length.not found
WidthWwants m/mmnot establishedNeither elevation provides a dimension explicitly applying to the pile cap width.not found
ThicknessTwants m/mmnot establishedNeither elevation provides a dimension explicitly applying to the pile cap thickness.not found
Instance CountNwants count2 countBoth elevations explicitly identify two pile caps, one below BENT 2 and one below BENT 3.readp1 · p01_r08 elevation of bridge spans bents and wingwallsp1 · p01_r09 elevation of bridge spans bents and pile bents
Concrete Gradefcknot establishedNo concrete grade or concrete class is stated for the pile caps.not found
Top LevelTOLwants mnot establishedEL.151.00 is identified as typical/groundline elevation and is not stated as the top level of a pile cap.not found

Worked out by openai/gpt-5.6-terra-pro from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

Notes on the sheets that carry it

  • p1CHAIN LINK WIRE FENCE, TYP.
  • p1FRONT FACE OF WALL NO.1
  • p1FRONT FACE OF WALL NO.2
  • p1EL.151.00, TYP.
  • p1APPROXIMATE EXISTING GROUNDLINE
  • p1FUTURE GROUNDLINE

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

p01_r08 elevation of bridge spans bents and wingwalls

page 1 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p01_r08_elevation_of_bridge_spans_bents_and_wingwalls
Original
p01_r08 elevation of bridge spans bents and wingwalls
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bridge superstructure",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Shown spanning between B.F.P.R. BENT 1, BENT 2, BENT 3, and B.F.P.R. BENT 4."
    },
    {
      "name": "B.F.P.R. bent",
      "tag": "B.F.P.R. BENT 1",
      "shape": "vertical wall/pier line",
      "material": "",
      "count": 1,
      "note": "Circled reference 1 shown below."
    },
    {
      "name": "bent",
      "tag": "BENT 2",
      "shape": "vertical pier with rectangular cap",
      "material": "",
      "count": 1,
      "note": "Circled reference 2 shown below; pile-supported foundation is shown."
    },
    {
      "name": "bent",
      "tag": "BENT 3",
      "shape": "vertical pier with rectangular cap",
      "material": "",
      "count": 1,
      "note": "Circled reference 3 shown below; pile-supported foundation is shown."
    },
    {
      "name": "B.F.P.R. bent",
      "tag": "B.F.P.R. BENT 4",
      "shape": "vertical wall/pier line",
      "material": "",
      "count": 1,
      "note": "Circled reference 4 shown below."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One shown at each of BENT 2 and BENT 3."
    },
    {
      "name": "piles",
      "tag": "",
      "shape": "vertical",
      "material": "",
      "count": 8,
      "note": "Four piles are visibly shown below each of the two pile caps."
    },
    {
      "name": "wall",
      "tag": "WALL NO. 1",
      "shape": "vertical",
      "material": "",
      "count": 1,
      "note": "Callout identifies front face of wall."
    },
    {
      "name": "wall",
      "tag": "WALL NO. 2",
      "shape": "vertical",
      "material": "",
      "count": 1,
      "note": "Callout identifies front face of wall."
    },
    {
      "name": "chain link wire fence",
      "tag": "",
      "shape": "rectangular fence panels",
      "material": "",
      "count": 3,
      "note": "Marked TYP."
    },
    {
      "name": "bearings",
      "tag": "EXP.",
      "shape": "rectangular",
      "material": "",
      "count": 4,
      "note": "Expansion bearing callouts shown at the end supports and adjacent to BENT 3."
    },
    {
      "name": "bearings",
      "tag": "FIX",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Fixed bearing callouts shown adjacent to BENT 2."
    },
    {
      "name": "existing track centerline",
      "tag": "℄ EXISTING TRACK",
      "shape": "vertical dashed line",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "future track centerline",
      "tag": "℄ FUTURE TRACK",
      "shape": "vertical dashed line",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "future access road centerline",
      "tag": "℄ FUTURE ACCESS ROAD",
      "shape": "vertical dashed line",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "TOTAL LENGTH OF BRIDGE",
      "value": "192'-0\"",
      "unit": "",
      "appliesTo": "bridge superstructure"
    },
    {
      "label": "span length",
      "value": "55'-0\"",
      "unit": "",
      "appliesTo": "B.F.P.R. BENT 1 to BENT 2"
    },
    {
      "label": "span length",
      "value": "82'-0\"",
      "unit": "",
      "appliesTo": "BENT 2 to BENT 3"
    },
    {
      "label": "span length",
      "value": "55'-0\"",
      "unit": "",
      "appliesTo": "BENT 3 to B.F.P.R. BENT 4"
    },
    {
      "label": "elevation",
      "value": "EL.151.00",
      "unit": "",
      "appliesTo": "groundline"
    }
  ],
  "notes": [
    "CHAIN LINK WIRE FENCE, TYP.",
    "FRONT FACE OF WALL NO.1",
    "FRONT FACE OF WALL NO.2",
    "EL.151.00, TYP.",
    "APPROXIMATE EXISTING GROUNDLINE",
    "FUTURE GROUNDLINE"
  ],
  "labels": [
    "PLAN",
    "ELEVATION",
    "PGL.",
    "B.F.P.R. BENT 1 ***",
    "BENT 2 **",
    "BENT 3 **",
    "B.F.P.R. BENT 4 ***",
    "℄ FUTURE ACCESS ROAD",
    "℄ EXISTING TRACK",
    "℄ FUTURE TRACK"
  ],
  "description": "This crop shows an elevation of a four-support bridge with end B.F.P.R. bents and two intermediate pile-supported bents. The elevation documents the 55'-0\", 82'-0\", and 55'-0\" span arrangement, wall front faces, fence locations, bearing designations, track centerlines, and existing/future groundlines."
}

p01_r08 elevation of bridge spans bents and wingwallsElevation

  • pile cap×2rectangularOne shown at each of BENT 2 and BENT 3.

192'-0" TOTAL LENGTH OF BRIDGE55'-0" span length82'-0" span length55'-0" span lengthEL.151.00 elevation

crop

p01_r09 elevation of bridge spans bents and pile bents

page 1 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p01_r09_elevation_of_bridge_spans_bents_and_pile_bents
Original
p01_r09 elevation of bridge spans bents and pile bents
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bridge superstructure",
      "tag": "",
      "shape": "continuous horizontal deck/girder profile",
      "material": "",
      "count": 1,
      "note": "Shown spanning between B.F.P.R. BENT 1 and B.F.P.R. BENT 4, with intermediate BENT 2 and BENT 3."
    },
    {
      "name": "bridge bent",
      "tag": "BENT 2",
      "shape": "rectangular cap with single rectangular column",
      "material": "",
      "count": 1,
      "note": "Shown with a pile cap and three visible piles."
    },
    {
      "name": "bridge bent",
      "tag": "BENT 3",
      "shape": "rectangular cap with single rectangular column",
      "material": "",
      "count": 1,
      "note": "Shown with a pile cap and three visible piles."
    },
    {
      "name": "bent/bridge support",
      "tag": "B.F.P.R. BENT 1",
      "shape": "vertical support at bridge end",
      "material": "",
      "count": 1,
      "note": "Support is adjacent to the front face of Wall No. 1."
    },
    {
      "name": "bent/bridge support",
      "tag": "B.F.P.R. BENT 4",
      "shape": "vertical support at bridge end",
      "material": "",
      "count": 1,
      "note": "Support is adjacent to the front face of Wall No. 2."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One shown below each of BENT 2 and BENT 3."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "vertical",
      "material": "",
      "count": 6,
      "note": "Three visible below each pile cap."
    },
    {
      "name": "wall",
      "tag": "WALL NO. 1",
      "shape": "vertical",
      "material": "",
      "count": 1,
      "note": "Only the front face is identified."
    },
    {
      "name": "wall",
      "tag": "WALL NO. 2",
      "shape": "vertical",
      "material": "",
      "count": 1,
      "note": "Only the front face is identified."
    },
    {
      "name": "chain link wire fence",
      "tag": "",
      "shape": "rectangular mesh panels",
      "material": "chain link wire",
      "count": 3,
      "note": "Marked TYP."
    },
    {
      "name": "bearing",
      "tag": "EXP.",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Expansion bearing condition shown at B.F.P.R. BENT 1, both sides of BENT 3, and B.F.P.R. BENT 4."
    },
    {
      "name": "bearing",
      "tag": "FIX",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Fixed bearing condition shown at BENT 2."
    }
  ],
  "measurements": [
    {
      "label": "TOTAL LENGTH OF BRIDGE",
      "value": "192'-0\" ***",
      "unit": "",
      "appliesTo": "bridge superstructure"
    },
    {
      "label": "",
      "value": "55'-0\" ***",
      "unit": "",
      "appliesTo": "span between B.F.P.R. BENT 1 and BENT 2"
    },
    {
      "label": "",
      "value": "82'-0\" ***",
      "unit": "",
      "appliesTo": "span between BENT 2 and BENT 3"
    },
    {
      "label": "",
      "value": "55'-0\" ***",
      "unit": "",
      "appliesTo": "span between BENT 3 and B.F.P.R. BENT 4"
    },
    {
      "label": "EL.",
      "value": "151.00",
      "unit": "",
      "appliesTo": "TYP."
    }
  ],
  "notes": [
    "CHAIN LINK WIRE FENCE, TYP.",
    "FRONT FACE OF WALL NO. 1",
    "FRONT FACE OF WALL NO. 2",
    "APPROXIMATE EXISTING GROUNDLINE",
    "FUTURE GROUNDLINE"
  ],
  "labels": [
    "PLAN",
    "TOTAL LENGTH OF BRIDGE",
    "PGL",
    "℄ FUTURE ACCESS ROAD",
    "℄ EXISTING TRACK",
    "℄ FUTURE TRACK",
    "ELEVATION",
    "1",
    "2",
    "3",
    "4"
  ],
  "description": "This crop shows an elevation of a three-span bridge with end supports identified as B.F.P.R. BENT 1 and B.F.P.R. BENT 4 and intermediate BENT 2 and BENT 3. It documents the overall and span lengths, bearing conditions, pile-supported intermediate bents, wall-front-face references, groundlines, track/access-road centerlines, and typical chain link wire fence."
}

p01_r09 elevation of bridge spans bents and pile bentsElevation

  • pile cap×2rectangularOne shown below each of BENT 2 and BENT 3.

192'-0" *** TOTAL LENGTH OF BRIDGE55'-0" ***82'-0" ***55'-0" ***151.00 EL.