Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Metal Deck Form

1 page · 2 crops · deck

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a metal deck form or stay-in-place form class.

How the sheets named it

Metal deck forms

Notes on the sheets that carry it

  • p2WELDING - ALL WELDING ON GEORGIA DOT PROJECTS SHALL BE PERFORMED BY GDOT CERTIFIED WELDERS THAT HAVE IN THEIR POSSESSION A CURRENT WELDING CERTIFICATION CARD ISSUED BY THE OFFICE OF MATERIALS AND TESTING. USE ONLY E70XX (EXCLUDING E7014 AND E7024) LOW HYDROGEN ELECTRODES FOR MANUAL SHIELDED METAL ARC WELDING.
  • p2SPECIAL PROTECTIVE COATING - CLEAN AND PAINT PILES AND SWAYBRACING WITH SPECIAL PROTECTIVE COATING NO. 2P IN ACCORDANCE WITH SECTIONS 520 AND 535 OF THE GEORGIA DOT SPECIFICATIONS. EXTEND COATING FROM TOP OF PILE TO 2FT BELOW GROUND FOR END BENT PILING. EXTEND COATING FROM BOTTOM OF CAP OR PEDESTAL FOOTING TO 5FT BELOW GROUND FOR INTERMEDIATE BENT PILING, REGARDLESS OF ENCASEMENT.
  • p2SHOP DRAWING SUBMISSION - SUBMIT SHOP DRAWINGS WITH DEPENDENT INFORMATION AS A SET. SHOP DRAWINGS FOR BEAMS, METAL DECK FORMS AND STEEL DIAPHRAGMS WILL NOT BE REVIEWED UNTIL ALL HAVE BEEN RECEIVED.
  • p2INCIDENTAL ITEMS - INCLUDE THE COST INCIDENTAL TO THE WORK THAT IS NOT SPECIFICALLY COVERED BY THE GEORGIA STANDARD SPECIFICATIONS, SUPPLEMENTAL SPECIFICATIONS AND/OR SPECIAL PROVISIONS IN THE OVERALL BID SUBMITTED. THIS INCLUDES THE COST OF WATERPROOFING, JOINT FILLERS AND OTHER INCIDENTAL ITEMS NECESSARY TO COMPLETE THE WORK.

Every crop it was read in — the drawing beside what the model took off it

Page 2

crop

p02_r19 general notes continued

page 2 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p02_r19_general_notes_continued
Original
p02_r19 general notes continued
{
  "view": "Notes",
  "objects": [
    {
      "name": "Piles",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Clean and paint with special protective coating No. 2P; coating limits differ for end bent and intermediate bent piling."
    },
    {
      "name": "Swaybracing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Included in special protective coating note."
    },
    {
      "name": "Cap",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced as the upper limit for intermediate bent piling coating."
    },
    {
      "name": "Pedestal footing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced as the upper limit for intermediate bent piling coating."
    },
    {
      "name": "Beams",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Shop drawings are referenced."
    },
    {
      "name": "Metal deck forms",
      "tag": "",
      "shape": "",
      "material": "metal",
      "count": null,
      "note": "Shop drawings are referenced."
    },
    {
      "name": "Steel diaphragms",
      "tag": "",
      "shape": "",
      "material": "steel",
      "count": null,
      "note": "Shop drawings are referenced."
    },
    {
      "name": "Waterproofing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Listed as an incidental cost item."
    },
    {
      "name": "Joint fillers",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Listed as an incidental cost item."
    }
  ],
  "measurements": [
    {
      "label": "Coating extension below ground for end bent piling",
      "value": "2",
      "unit": "FT",
      "appliesTo": "Piles"
    },
    {
      "label": "Coating extension below ground for intermediate bent piling",
      "value": "5",
      "unit": "FT",
      "appliesTo": "Piles"
    }
  ],
  "notes": [
    "WELDING - ALL WELDING ON GEORGIA DOT PROJECTS SHALL BE PERFORMED BY GDOT CERTIFIED WELDERS THAT HAVE IN THEIR POSSESSION A CURRENT WELDING CERTIFICATION CARD ISSUED BY THE OFFICE OF MATERIALS AND TESTING. USE ONLY E70XX (EXCLUDING E7014 AND E7024) LOW HYDROGEN ELECTRODES FOR MANUAL SHIELDED METAL ARC WELDING.",
    "SPECIAL PROTECTIVE COATING - CLEAN AND PAINT PILES AND SWAYBRACING WITH SPECIAL PROTECTIVE COATING NO. 2P IN ACCORDANCE WITH SECTIONS 520 AND 535 OF THE GEORGIA DOT SPECIFICATIONS. EXTEND COATING FROM TOP OF PILE TO 2FT BELOW GROUND FOR END BENT PILING. EXTEND COATING FROM BOTTOM OF CAP OR PEDESTAL FOOTING TO 5FT BELOW GROUND FOR INTERMEDIATE BENT PILING, REGARDLESS OF ENCASEMENT.",
    "SHOP DRAWING SUBMISSION - SUBMIT SHOP DRAWINGS WITH DEPENDENT INFORMATION AS A SET. SHOP DRAWINGS FOR BEAMS, METAL DECK FORMS AND STEEL DIAPHRAGMS WILL NOT BE REVIEWED UNTIL ALL HAVE BEEN RECEIVED.",
    "INCIDENTAL ITEMS - INCLUDE THE COST INCIDENTAL TO THE WORK THAT IS NOT SPECIFICALLY COVERED BY THE GEORGIA STANDARD SPECIFICATIONS, SUPPLEMENTAL SPECIFICATIONS AND/OR SPECIAL PROVISIONS IN THE OVERALL BID SUBMITTED. THIS INCLUDES THE COST OF WATERPROOFING, JOINT FILLERS AND OTHER INCIDENTAL ITEMS NECESSARY TO COMPLETE THE WORK."
  ],
  "labels": [
    "WELDING",
    "SPECIAL PROTECTIVE COATING",
    "SHOP DRAWING SUBMISSION",
    "INCIDENTAL ITEMS"
  ],
  "description": "This crop is a block of general construction notes for a Georgia DOT project. It documents welding certification and electrode requirements, protective coating limits for piles and swaybracing, shop drawing submission requirements, and incidental bid-item requirements."
}

p02_r19 general notes continuedNotes

  • Metal deck formsmetalShop drawings are referenced.

2 FT Coating extension below ground for end bent piling5 FT Coating extension below ground for intermediate bent piling

crop

p02_r19

page 2 · welding_and_steel_diaphragm_notes_p02_r19
Original
p02_r19
{
  "view": "Notes",
  "objects": [
    {
      "name": "Piles",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "To be cleaned and painted with special protective coating."
    },
    {
      "name": "Swaybracing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "To be cleaned and painted with special protective coating."
    },
    {
      "name": "End bent piling",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Coating extends from top of pile to below ground."
    },
    {
      "name": "Cap or pedestal footing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced as the starting point for coating on intermediate bent piling."
    },
    {
      "name": "Intermediate bent piling",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Coating extension applies regardless of encasement."
    },
    {
      "name": "Beams",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Shop drawings are required."
    },
    {
      "name": "Metal deck forms",
      "tag": "",
      "shape": "",
      "material": "metal",
      "count": null,
      "note": "Shop drawings are required."
    },
    {
      "name": "Steel diaphragms",
      "tag": "",
      "shape": "",
      "material": "steel",
      "count": null,
      "note": "Shop drawings are required."
    },
    {
      "name": "Waterproofing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Included as an incidental cost item."
    },
    {
      "name": "Joint fillers",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Included as an incidental cost item."
    }
  ],
  "measurements": [
    {
      "label": "Coating extension below ground for end bent piling",
      "value": "2FT",
      "unit": "FT",
      "appliesTo": "End bent piling"
    },
    {
      "label": "Coating extension below ground for intermediate bent piling",
      "value": "5FT",
      "unit": "FT",
      "appliesTo": "Intermediate bent piling"
    }
  ],
  "notes": [
    "WELDING - ALL WELDING ON GEORGIA DOT PROJECTS SHALL BE PERFORMED BY GDOT CERTIFIED WELDERS THAT HAVE IN THEIR POSSESSION A CURRENT WELDING CERTIFICATION CARD ISSUED BY THE OFFICE OF MATERIALS AND TESTING. USE ONLY E70XX (EXCLUDING E7014 AND E7024) LOW HYDROGEN ELECTRODES FOR MANUAL SHIELDED METAL ARC WELDING.",
    "SPECIAL PROTECTIVE COATING - CLEAN AND PAINT PILES AND SWAYBRACING WITH SPECIAL PROTECTIVE COATING NO. 2P IN ACCORDANCE WITH SECTIONS 520 AND 535 OF THE GEORGIA DOT SPECIFICATIONS. EXTEND COATING FROM TOP OF PILE TO 2FT BELOW GROUND FOR END BENT PILING. EXTEND COATING FROM BOTTOM OF CAP OR PEDESTAL FOOTING TO 5FT BELOW GROUND FOR INTERMEDIATE BENT PILING, REGARDLESS OF ENCASEMENT.",
    "SHOP DRAWING SUBMISSION - SUBMIT SHOP DRAWINGS WITH DEPENDENT INFORMATION AS A SET. SHOP DRAWINGS FOR BEAMS, METAL DECK FORMS AND STEEL DIAPHRAGMS WILL NOT BE REVIEWED UNTIL ALL HAVE BEEN RECEIVED.",
    "INCIDENTAL ITEMS - INCLUDE THE COST INCIDENTAL TO THE WORK THAT IS NOT SPECIFICALLY COVERED BY THE GEORGIA STANDARD SPECIFICATIONS, SUPPLEMENTAL SPECIFICATIONS AND/OR SPECIAL PROVISIONS IN THE OVERALL BID SUBMITTED. THIS INCLUDES THE COST OF WATERPROOFING, JOINT FILLERS AND OTHER INCIDENTAL ITEMS NECESSARY TO COMPLETE THE WORK."
  ],
  "labels": [
    "WELDING",
    "SPECIAL PROTECTIVE COATING",
    "SHOP DRAWING SUBMISSION",
    "INCIDENTAL ITEMS",
    "GEORGIA DOT SPECIFICATIONS",
    "SECTIONS 520 AND 535"
  ],
  "description": "This crop is a block of general construction notes covering welding, protective coating, shop drawing submission, and incidental bid items. It documents requirements for piles, swaybracing, bent piling, beams, metal deck forms, steel diaphragms, waterproofing, and joint fillers; no structural view or item quantities are shown."
}

p02_r19Notes

  • Metal deck formsmetalShop drawings are required.

2FT FT Coating extension below ground for end bent piling5FT FT Coating extension below ground for intermediate bent piling