Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Mechanical Coupler

2 pages · 4 crops · ×5 · material

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a reinforcing bar mechanical coupler class.

Every dimension read for it4

  • 1'-0"mechanical-coupler vertical dimensionsp14 · bent_2_left
  • 2'-0"mechanical-coupler vertical dimensionp14 · bent_2_left
  • 1'-0" / 2'-0" / 1'-0"Mechanical coupler dimensionsp15 · bent_3_left
  • 15°Anglenot attributedp15 · bent_3_left

Notes on the sheets that carry it

  • p14FORM 3" DIA. X 12" DEEP HOLE FOR 1 1/2" DIA. SMOOTH DOWEL BAR, TYP.
  • p14MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 511
  • p14* REQUIRED CONSTRUCTION JOINT. AT CONTRACTOR'S OPTION, CONSTRUCTION JOINT MAY BE RELOCATED TO TOP OF FOOTING.
  • p141. SEE BRIDGE ... COLUMN AN...
  • p142. BARS 422
  • p143. EXTEND BA...
  • p14* CONST. JT., TYP.

Every crop it was read in — the drawing beside what the model took off it

Page 14

crop

bent_2_left

page 14 · bent_2_left
Original
bent_2_left
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bent cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown in elevation below the plan; 44-421 at equal spaces is called out."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 12,
      "note": "Shown in plan at six beam centerlines, two bearing locations per beam."
    },
    {
      "name": "column",
      "tag": "COLUMN 1",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Elevation shown."
    },
    {
      "name": "column",
      "tag": "COLUMN 2",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Elevation shown."
    },
    {
      "name": "footing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One below each column; footing plan/profile at right is marked typical."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 4,
      "note": "Two piles are visibly drawn below each footing; right-hand footing representation is typical."
    },
    {
      "name": "reinforcement bar",
      "tag": "8-1I22",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Bent-cap reinforcement callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "2-520",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Bent-cap reinforcement callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "8-1I23",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Bent-cap reinforcement callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "12-521",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Callout occurs at each end of the bent cap."
    },
    {
      "name": "reinforcement bar",
      "tag": "14-522 DBL",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Callout occurs adjacent to both columns."
    },
    {
      "name": "reinforcement bar",
      "tag": "12-1I21 SERIES",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Column 1 reinforcement callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "12-1I20 SERIES",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Column 2 reinforcement callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "12-420 AT EQ. SPS.",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Footing reinforcement callout."
    },
    {
      "name": "reinforcement bar",
      "tag": "16-920 AT EQ. SPS.",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Footing reinforcement callout."
    },
    {
      "name": "dowel bar",
      "tag": "",
      "shape": "circular",
      "material": "smooth steel",
      "count": 6,
      "note": "Plan callout: 1 1/2 in. diameter smooth dowel bar, typical."
    },
    {
      "name": "mechanical coupler",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Shown on Column 1; callout states typical."
    }
  ],
  "measurements": [
    {
      "label": "cap plan overall length",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap plan end dimension, left",
      "value": "2'-3 3/8\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap plan end dimension, right",
      "value": "2'-3 5/16\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "beam centerline end spacing",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "beam centerline spacing",
      "value": "7'-7 1/2\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "bearing spacing",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "bearing"
    },
    {
      "label": "typical cap plan dimension",
      "value": "8'-20'-05.0\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension at STA. 17+81.35",
      "value": "2'-9 3/8\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension at STA. 17+81.35",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap plan transverse dimension",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap plan transverse dimension",
      "value": "2'-1/2\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap plan transverse dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap plan transverse dimension",
      "value": "11 1/2\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dowel-bar hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "dowel bar"
    },
    {
      "label": "dowel-bar hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "dowel bar"
    },
    {
      "label": "dowel-bar diameter",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "dowel bar"
    },
    {
      "label": "bent-cap length at equal spaces",
      "value": "44-421 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "back elevation",
      "value": "EL. 185.78 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "ahead elevation",
      "value": "EL. 185.23 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "back elevation",
      "value": "EL. 185.96 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "ahead elevation",
      "value": "EL. 185.41 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "back elevation",
      "value": "EL. 186.10 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "ahead elevation",
      "value": "EL. 185.55 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "back elevation",
      "value": "EL. 186.24 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "ahead elevation",
      "value": "EL. 185.70 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "back elevation",
      "value": "EL. 186.38 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "ahead elevation",
      "value": "EL. 185.84 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "back elevation",
      "value": "EL. 186.49 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "ahead elevation",
      "value": "EL. 185.93 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "bent-cap minimum depth",
      "value": "4'-0\" MIN.",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap end elevation",
      "value": "EL. 181.25",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap end elevation",
      "value": "EL. 181.11",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap elevation",
      "value": "EL. 181.32",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap elevation",
      "value": "EL. 181.73",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap elevation",
      "value": "EL. 181.80",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap end elevation",
      "value": "EL. 181.93",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap end reinforcement spacing",
      "value": "11 SPS. AT 7\"",
      "unit": "",
      "appliesTo": "12-521"
    },
    {
      "label": "cap central reinforcement spacing",
      "value": "25-521 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap end width",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "central cap width",
      "value": "25'-0\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension",
      "value": "3 1/2\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "column 1 reinforcement spacing",
      "value": "12-1I21 SERIES",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "column 2 reinforcement spacing",
      "value": "12-1I20 SERIES",
      "unit": "",
      "appliesTo": "COLUMN 2"
    },
    {
      "label": "mechanical-coupler vertical dimensions",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "mechanical coupler"
    },
    {
      "label": "mechanical-coupler vertical dimension",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "mechanical coupler"
    },
    {
      "label": "column vertical dimension",
      "value": "9'-6\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "dimension",
      "value": "4\" TYP.",
      "unit": "",
      "appliesTo": "column"
    },
    {
      "label": "concrete cover",
      "value": "3\" CL., TYP.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "footing depth",
      "value": "4'-0\" TYP.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "footing plan width",
      "value": "11'-6\" SQUARE TYP.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "footing pile offset",
      "value": "1'-0\" TYP.",
      "unit": "",
      "appliesTo": "pile"
    },
    {
      "label": "column/footing plan dimensions",
      "value": "4'-0\" TYP.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "column/footing plan dimensions",
      "value": "3'-6\" TYP.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "footing elevation",
      "value": "EL. 151.00, TYP.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "column dimension",
      "value": "4'-8\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "footing dimension",
      "value": "1'-9\"",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "reinforcement spacing",
      "value": "14-620 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "reinforcement spacing",
      "value": "14-621 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "reinforcement spacing",
      "value": "9-620 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "reinforcement spacing",
      "value": "9-621 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "reinforcement spacing",
      "value": "7-620 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "reinforcement spacing",
      "value": "7-621 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "reinforcement spacing",
      "value": "14-620 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "reinforcement spacing",
      "value": "14-621 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP.",
    "MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 511",
    "* REQUIRED CONSTRUCTION JOINT. AT CONTRACTOR'S OPTION, CONSTRUCTION JOINT MAY BE RELOCATED TO TOP OF FOOTING.",
    "1. SEE BRIDGE ... COLUMN AN...",
    "2. BARS 422",
    "3. EXTEND BA..."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "℄ BEARING",
    "℄ BENT",
    "STA. 17+81.35",
    "℄ BEAM 1",
    "℄ BEAM 2",
    "℄ BEAM 3",
    "℄ BEAM 4",
    "℄ BEAM 5",
    "℄ BEAM 6",
    "PLAN",
    "(BENT 2 LEFT)",
    "A",
    "B",
    "C",
    "ELEVATION",
    "(BENT 2 LEFT LOOKING AHEAD)",
    "* CONST. JT., TYP.",
    "PILE",
    "NOTES:",
    "SUBSTRUCTURE QUANTITIES",
    "ITEM"
  ],
  "description": "This crop contains the plan and elevation for Bent 2 Left, looking ahead, with the elevation as the principal lower view. It shows a six-beam bent cap supported by two rectangular columns and two footings, together with visible pile, bearing, dowel, and reinforcement callouts. A partial notes block, partial pile detail, and the top of a substructure quantities table are also visible at the crop edges."
}

bent_2_leftElevation

  • mechanical coupler×2Shown on Column 1; callout states typical.

42'-6" cap plan overall length2'-3 3/8" cap plan end dimension, left2'-3 5/16" cap plan end dimension, right6'-0" beam centerline end spacing7'-7 1/2" beam centerline spacing7'-7/16" bearing spacing8'-20'-05.0" typical cap plan dimension2'-9 3/8" dimension at STA. 17+81.35+58 more

crop

p14_r03 elevation of bent columns and footing left

page 14 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p14_r03_elevation_of_bent_columns_and_footing_left
Original
p14_r03 elevation of bent columns and footing left
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bent cap",
      "tag": "",
      "shape": "rectangular, stepped top profile",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Cap shown spanning between Column 1 and Column 2."
    },
    {
      "name": "column",
      "tag": "COLUMN 1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Column elevation includes reinforcement and mechanical-coupler callout."
    },
    {
      "name": "column",
      "tag": "COLUMN 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown at right with typical footing detail."
    },
    {
      "name": "footing",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One detailed beneath Column 1 and one typical beneath Column 2."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "rectangular schematic",
      "material": "",
      "count": 4,
      "note": "Two pile locations are visible below each footing; portions are cut off by the crop."
    },
    {
      "name": "reinforcement bar",
      "tag": "421",
      "shape": "linear",
      "material": "",
      "count": 44,
      "note": "Bent-cap reinforcement, at equal spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "1122",
      "shape": "linear",
      "material": "",
      "count": 8,
      "note": "Bent-cap reinforcement."
    },
    {
      "name": "reinforcement bar",
      "tag": "520",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Bent-cap reinforcement."
    },
    {
      "name": "reinforcement bar",
      "tag": "1123",
      "shape": "linear",
      "material": "",
      "count": 8,
      "note": "Bent-cap reinforcement."
    },
    {
      "name": "reinforcement bar",
      "tag": "521",
      "shape": "linear",
      "material": "",
      "count": 49,
      "note": "Column reinforcement callouts include 12-521 each side and 25-521 at equal spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "522",
      "shape": "linear",
      "material": "",
      "count": 28,
      "note": "Callout is 14-522 DBL at two locations."
    },
    {
      "name": "reinforcement bar",
      "tag": "620",
      "shape": "linear",
      "material": "",
      "count": 67,
      "note": "Column transverse reinforcement shown in multiple zones."
    },
    {
      "name": "reinforcement bar",
      "tag": "621",
      "shape": "linear",
      "material": "",
      "count": 67,
      "note": "Column transverse reinforcement shown in multiple zones."
    },
    {
      "name": "reinforcement bar",
      "tag": "420",
      "shape": "linear",
      "material": "",
      "count": 12,
      "note": "Footing reinforcement at equal spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "920",
      "shape": "linear",
      "material": "",
      "count": 32,
      "note": "Footing reinforcement at equal spacing."
    },
    {
      "name": "mechanical coupler",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Shown on Column 1; note states typical."
    }
  ],
  "measurements": [
    {
      "label": "reinforcement quantity and spacing",
      "value": "44-421 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "421"
    },
    {
      "label": "elevation",
      "value": "EL. 185.78 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.23 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.96 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.41 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 186.10 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.55 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 186.24 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.70 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 186.38 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.84 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 186.49 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.93 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "minimum depth",
      "value": "4'-0\" MIN.",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "reinforcement quantity",
      "value": "8-1122",
      "unit": "",
      "appliesTo": "1122"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-520",
      "unit": "",
      "appliesTo": "520"
    },
    {
      "label": "reinforcement quantity",
      "value": "8-1123",
      "unit": "",
      "appliesTo": "1123"
    },
    {
      "label": "elevation",
      "value": "EL. 181.25",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.11",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.32",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.73",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.80",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.93",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension",
      "value": "1'-9\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension",
      "value": "4'-8\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "spacing",
      "value": "11 SPS. AT 7\"",
      "unit": "",
      "appliesTo": "521"
    },
    {
      "label": "reinforcement quantity",
      "value": "12-521",
      "unit": "",
      "appliesTo": "521"
    },
    {
      "label": "dimension",
      "value": "3½\"",
      "unit": "",
      "appliesTo": "column"
    },
    {
      "label": "dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "column"
    },
    {
      "label": "spacing",
      "value": "6 SPS AT 5\"",
      "unit": "",
      "appliesTo": "522"
    },
    {
      "label": "reinforcement quantity",
      "value": "14-522 DBL",
      "unit": "",
      "appliesTo": "522"
    },
    {
      "label": "dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "column"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "25-521 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "521"
    },
    {
      "label": "dimension",
      "value": "25'-0\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "reinforcement quantity",
      "value": "12-1121 SERIES",
      "unit": "",
      "appliesTo": "1121"
    },
    {
      "label": "dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "dimension",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "dimension",
      "value": "9'-6\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "dimension",
      "value": "4\" TYP.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "dimension",
      "value": "3\" CL., TYP.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "elevation",
      "value": "EL. 151.00, TYP.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "12-420 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "420"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "16-920 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "920"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "16-920 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "920"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "14-620 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "620"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "14-621 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "621"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "9-620 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "620"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "9-621 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "621"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "9-620 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "620"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "9-621 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "621"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "7-620 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "620"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "7-621 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "621"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "14-620 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "620"
    },
    {
      "label": "reinforcement quantity and spacing",
      "value": "14-621 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "621"
    },
    {
      "label": "dimension",
      "value": "4'-0\" TYP.",
      "unit": "",
      "appliesTo": "COLUMN 2 footing"
    },
    {
      "label": "dimension",
      "value": "3'-6\" TYP.",
      "unit": "",
      "appliesTo": "COLUMN 2"
    },
    {
      "label": "dimension",
      "value": "4'-0\" TYP.",
      "unit": "",
      "appliesTo": "COLUMN 2 footing"
    },
    {
      "label": "dimension",
      "value": "4'-0\" TYP.",
      "unit": "",
      "appliesTo": "COLUMN 2 footing"
    },
    {
      "label": "dimension",
      "value": "1'-0\", TYP.",
      "unit": "",
      "appliesTo": "piles"
    },
    {
      "label": "dimension",
      "value": "11'-6\" SQUARE TYP.",
      "unit": "",
      "appliesTo": "COLUMN 2 footing"
    }
  ],
  "notes": [
    "MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 511",
    "* REQUIRED CONSTRUCTION JOINT. AT CONTRACTOR’S OPTION, CONSTRUCTION JOINT MAY BE RELOCATED TO TOP OF FOOTING.",
    "* CONST. JT., TYP."
  ],
  "labels": [
    "A",
    "B",
    "C",
    "ELEVATION",
    "(BENT 2 LEFT LOOKING AHEAD)",
    "SUBSTRUCTURE QUA",
    "ITEM",
    "BENT"
  ],
  "description": "This crop shows the elevation for Bent 2, left looking ahead. It documents a reinforced-concrete bent cap supported by Columns 1 and 2, including column reinforcement, a detailed footing at Column 1, and a typical footing arrangement at Column 2. A partial substructure quantity table is visible at the lower-right edge."
}

p14_r03 elevation of bent columns and footing leftElevation

  • mechanical coupler×2rectangularShown on Column 1; note states typical.

44-421 AT EQ. SPS. reinforcement quantity and spacingEL. 185.78 (BK) elevationEL. 185.23 (AH) elevationEL. 185.96 (BK) elevationEL. 185.41 (AH) elevationEL. 186.10 (BK) elevationEL. 185.55 (AH) elevationEL. 186.24 (BK) elevation+54 more

Page 15

crop

bent_3_left

page 15 · bent_3_left
Original
bent_3_left
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bent cap",
      "tag": "℄ BENT",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown in plan above the elevation."
    },
    {
      "name": "bearing",
      "tag": "℄ BEARING",
      "shape": "circular symbols",
      "material": "",
      "count": 12,
      "note": "Bearing center symbols are shown at six beam lines, two per beam line."
    },
    {
      "name": "beam",
      "tag": "℄ BEAM 1 through ℄ BEAM 6",
      "shape": "not shown; centerlines only",
      "material": "",
      "count": 6,
      "note": "Beam centerlines are shown in plan."
    },
    {
      "name": "smooth dowel bar",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Callout specifies 1 1/2 in. diameter smooth dowel bars in formed holes."
    },
    {
      "name": "column",
      "tag": "℄ COLUMN 1 and ℄ COLUMN 2",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Column 1 is detailed; Column 2 is shown schematically in the elevation."
    },
    {
      "name": "footing",
      "tag": "",
      "shape": "rectangular, 13'-0\" square typical",
      "material": "",
      "count": 2,
      "note": "One footing is detailed below Column 1 and a typical footing is shown below Column 2."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "rectangular schematic",
      "material": "",
      "count": 4,
      "note": "Two pile projections are visible below each footing representation."
    },
    {
      "name": "reinforcement bar",
      "tag": "44-431",
      "shape": "",
      "material": "",
      "count": 44,
      "note": "At equal spacings."
    },
    {
      "name": "reinforcement bar",
      "tag": "8-1132",
      "shape": "",
      "material": "",
      "count": 8,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "2-530",
      "shape": "",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "8-1133",
      "shape": "",
      "material": "",
      "count": 8,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "12-531",
      "shape": "",
      "material": "",
      "count": 12,
      "note": "Shown at 7 in. spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "14-532 DBL",
      "shape": "",
      "material": "",
      "count": 14,
      "note": "Double bars; shown at 5 in. spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "12-1131 SERIES",
      "shape": "",
      "material": "",
      "count": 12,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "12-1130 SERIES",
      "shape": "",
      "material": "",
      "count": 12,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "14-630",
      "shape": "",
      "material": "",
      "count": 14,
      "note": "Shown at 6 in. maximum spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "9-630",
      "shape": "",
      "material": "",
      "count": 9,
      "note": "Shown at 12 in. maximum and 6 in. maximum spacings."
    },
    {
      "name": "reinforcement bar",
      "tag": "9-631",
      "shape": "",
      "material": "",
      "count": 9,
      "note": "Shown at 12 in. maximum and 6 in. maximum spacings."
    },
    {
      "name": "reinforcement bar",
      "tag": "18-930",
      "shape": "",
      "material": "",
      "count": 18,
      "note": "At equal spacings."
    },
    {
      "name": "construction joint",
      "tag": "* CONST. JT.",
      "shape": "horizontal",
      "material": "",
      "count": null,
      "note": "Typical construction joint is shown at the footing/column interface."
    },
    {
      "name": "mechanical coupler",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Typical at Column 1."
    }
  ],
  "measurements": [
    {
      "label": "Angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Offset from SR 21 WB = PGL",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Station",
      "value": "STA. 18+63.35",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Dowel hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "smooth dowel bar"
    },
    {
      "label": "Dowel hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "smooth dowel bar"
    },
    {
      "label": "Smooth dowel bar diameter",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "smooth dowel bar"
    },
    {
      "label": "Bent plan width segment",
      "value": "11 1/2\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Bent plan width segment",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Bent plan width segment",
      "value": "2'-1 1/2\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Bent plan overall width",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Bent plan width segment",
      "value": "2'-1 1/2\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Bent plan width segment",
      "value": "11 1/2\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "End offset",
      "value": "2'-3 3/8\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Beam centerline spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "℄ BEAM 1 through ℄ BEAM 6"
    },
    {
      "label": "End offset",
      "value": "2'-3 5/16\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Beam-line end segment",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Beam centerline spacing",
      "value": "7'-7 1/2\"",
      "unit": "",
      "appliesTo": "℄ BEAM 1 through ℄ BEAM 6"
    },
    {
      "label": "Bent plan overall length",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Dimension at bearing/dowel location",
      "value": "2'-9 3/8\"",
      "unit": "",
      "appliesTo": "℄ BEARING"
    },
    {
      "label": "Top elevation",
      "value": "EL. 185.79 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Bottom elevation",
      "value": "EL. 185.24 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Top elevation",
      "value": "EL. 185.98 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Bottom elevation",
      "value": "EL. 185.44 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Top elevation",
      "value": "EL. 186.14 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Bottom elevation",
      "value": "EL. 185.60 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Top elevation",
      "value": "EL. 186.30 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Bottom elevation",
      "value": "EL. 185.75 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Top elevation",
      "value": "EL. 186.46 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Bottom elevation",
      "value": "EL. 185.91 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Top elevation",
      "value": "EL. 186.58 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Bottom elevation",
      "value": "EL. 186.03 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Bent cap minimum depth",
      "value": "4'-0\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.26",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.11",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.34",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.80",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.88",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 182.03",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Vertical dimension",
      "value": "1'-9\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Vertical dimension",
      "value": "4'-8\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Column/footing vertical dimension",
      "value": "9'-6\"",
      "unit": "",
      "appliesTo": "℄ COLUMN 1"
    },
    {
      "label": "Column width",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "℄ COLUMN 1"
    },
    {
      "label": "Column spacing dimension",
      "value": "25'-0\"",
      "unit": "",
      "appliesTo": "columns"
    },
    {
      "label": "Dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "columns"
    },
    {
      "label": "Cover",
      "value": "4\"",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "Clear cover",
      "value": "3\" CL.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "Footing bottom elevation",
      "value": "EL. 151.00, TYP.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "Footing width",
      "value": "13'-0\" SQUARE",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "Footing depth",
      "value": "4'-0\"",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "Column width, typical",
      "value": "4'-9\"",
      "unit": "",
      "appliesTo": "columns"
    },
    {
      "label": "Column spacing, typical",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": "columns"
    },
    {
      "label": "Pile projection/embedding dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "pile"
    },
    {
      "label": "Mechanical coupler dimensions",
      "value": "1'-0\" / 2'-0\" / 1'-0\"",
      "unit": "",
      "appliesTo": "mechanical coupler"
    },
    {
      "label": "Reinforcement spacing",
      "value": "6\" MAX.",
      "unit": "",
      "appliesTo": "14-630"
    },
    {
      "label": "Reinforcement spacing",
      "value": "12\" MAX.",
      "unit": "",
      "appliesTo": "9-630"
    },
    {
      "label": "Reinforcement spacing",
      "value": "12\" MAX.",
      "unit": "",
      "appliesTo": "9-631"
    },
    {
      "label": "Reinforcement spacing",
      "value": "6\" MAX.",
      "unit": "",
      "appliesTo": "9-630"
    },
    {
      "label": "Reinforcement spacing",
      "value": "6\" MAX.",
      "unit": "",
      "appliesTo": "9-631"
    },
    {
      "label": "Reinforcement spacing",
      "value": "7\"",
      "unit": "",
      "appliesTo": "12-531"
    },
    {
      "label": "Reinforcement spacing",
      "value": "5\"",
      "unit": "",
      "appliesTo": "14-532 DBL"
    },
    {
      "label": "Angle",
      "value": "15°",
      "unit": "",
      "appliesTo": ""
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP.",
    "MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 511",
    "* REQUIRED CONSTRUCTION JOINT. AT CONTRACTOR'S OPTION, CONSTRUCTION JOINT MAY BE RELOCATED TO TOP OF FOOTING."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "STA. 18+63.35",
    "PLAN",
    "(BENT 3 LEFT)",
    "A",
    "B",
    "C",
    "ELEVATION",
    "(BENT 3 LEFT LOOKING AHEAD)",
    "NOTES"
  ],
  "description": "This crop contains a plan of Bent 3 Left and an elevation looking ahead. It documents the bent-cap layout at six beam centerlines, bearing locations and dowel-bar provisions, together with two columns, typical footings/pile projections, elevations, reinforcement callouts, and a construction-joint note."
}

bent_3_leftElevation

  • mechanical couplerTypical at Column 1.

81°-20'-05.0" Angle81°-20'-05.0" Angle22'-0" Offset from SR 21 WB = PGLSTA. 18+63.35 Station3" Dowel hole diameter12" Dowel hole depth1 1/2" Smooth dowel bar diameter11 1/2" Bent plan width segment+54 more

crop

p15_r04 elevation of bent 3 left columns and footing

page 15 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p15_r04_elevation_of_bent_3_left_columns_and_footing
Original
p15_r04 elevation of bent 3 left columns and footing
{
  "view": "Elevation",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "",
      "shape": "rectangular, stepped/sloping top",
      "material": "",
      "count": 1,
      "note": "Top transverse member shown across two columns."
    },
    {
      "name": "Column",
      "tag": "COLUMN 1",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Left column shown with reinforcing and mechanical coupler callout."
    },
    {
      "name": "Column",
      "tag": "COLUMN 2",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Right column shown schematically."
    },
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Left footing is detailed; right footing is shown typical."
    },
    {
      "name": "Reinforcement bar",
      "tag": "431",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Callout: 44-431 AT EQ. SPS."
    },
    {
      "name": "Reinforcement bar",
      "tag": "1132",
      "shape": "bar",
      "material": "",
      "count": 8,
      "note": "Bent-cap reinforcement callout."
    },
    {
      "name": "Reinforcement bar",
      "tag": "530",
      "shape": "bar",
      "material": "",
      "count": 2,
      "note": "Bent-cap reinforcement callout."
    },
    {
      "name": "Reinforcement bar",
      "tag": "1133",
      "shape": "bar",
      "material": "",
      "count": 8,
      "note": "Bent-cap reinforcement callout."
    },
    {
      "name": "Reinforcement bar",
      "tag": "531",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Callouts include 12-531 and 25-531 AT EQ. SPS."
    },
    {
      "name": "Reinforcement bar",
      "tag": "532",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Callout: 14-532 DBL."
    },
    {
      "name": "Reinforcement bar",
      "tag": "630",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Column reinforcement callouts at 6 inch and 12 inch maximum spacing."
    },
    {
      "name": "Reinforcement bar",
      "tag": "631",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Column reinforcement callouts at 6 inch and 12 inch maximum spacing."
    },
    {
      "name": "Reinforcement bar",
      "tag": "1131",
      "shape": "bar",
      "material": "",
      "count": 12,
      "note": "Column 1 reinforcement series."
    },
    {
      "name": "Reinforcement bar",
      "tag": "1130",
      "shape": "bar",
      "material": "",
      "count": 12,
      "note": "Column 1 reinforcement series."
    },
    {
      "name": "Reinforcement bar",
      "tag": "430",
      "shape": "bar",
      "material": "",
      "count": 14,
      "note": "Footing reinforcement callout at equal spacing."
    },
    {
      "name": "Reinforcement bar",
      "tag": "930",
      "shape": "bar",
      "material": "",
      "count": 18,
      "note": "Footing reinforcement callout at equal spacing."
    },
    {
      "name": "Construction joint",
      "tag": "",
      "shape": "horizontal joint",
      "material": "",
      "count": null,
      "note": "Required construction joint shown at top of footing."
    },
    {
      "name": "Mechanical coupler",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Typical mechanical coupler indicated in Column 1."
    }
  ],
  "measurements": [
    {
      "label": "Reinforcement spacing",
      "value": "44-431 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "431"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.79 (AH)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.24 (BK)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.98 (AH)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.44 (BK)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.14 (AH)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.60 (BK)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.30 (AH)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.75 (BK)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.46 (AH)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.91 (BK)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.58 (AH)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.03 (BK)",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Reinforcement callout",
      "value": "8-1132",
      "unit": "",
      "appliesTo": "1132"
    },
    {
      "label": "Reinforcement callout",
      "value": "2-530",
      "unit": "",
      "appliesTo": "530"
    },
    {
      "label": "Reinforcement callout",
      "value": "8-1133",
      "unit": "",
      "appliesTo": "1133"
    },
    {
      "label": "Vertical dimension",
      "value": "4'-0\" MIN.",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Reinforcement spacing",
      "value": "14-630 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "630"
    },
    {
      "label": "Reinforcement spacing",
      "value": "14-631 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "631"
    },
    {
      "label": "Vertical dimension",
      "value": "1'-9\"",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Vertical dimension",
      "value": "4'-8\"",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.26",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.11",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Spacing",
      "value": "3 1/2\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "Reinforcement spacing",
      "value": "11 SPS. AT 7\"",
      "unit": "",
      "appliesTo": "531"
    },
    {
      "label": "Reinforcement callout",
      "value": "12-531",
      "unit": "",
      "appliesTo": "531"
    },
    {
      "label": "Spacing",
      "value": "3 1/2\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "Spacing",
      "value": "2\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "Reinforcement spacing",
      "value": "6 SPS AT 5\"",
      "unit": "",
      "appliesTo": "532"
    },
    {
      "label": "Reinforcement callout",
      "value": "14-532 DBL",
      "unit": "",
      "appliesTo": "532"
    },
    {
      "label": "Reinforcement spacing",
      "value": "25-531 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "531"
    },
    {
      "label": "Horizontal dimension",
      "value": "25'-0\"",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Reinforcement spacing",
      "value": "6 SPS AT 5\"",
      "unit": "",
      "appliesTo": "532"
    },
    {
      "label": "Reinforcement callout",
      "value": "14-532 DBL",
      "unit": "",
      "appliesTo": "532"
    },
    {
      "label": "Spacing",
      "value": "2\"",
      "unit": "",
      "appliesTo": "Column 2"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.34",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.80",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.88",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 182.03",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Spacing",
      "value": "3 1/2\"",
      "unit": "",
      "appliesTo": "Column 2"
    },
    {
      "label": "Reinforcement spacing",
      "value": "11 SPS. AT 7\"",
      "unit": "",
      "appliesTo": "531"
    },
    {
      "label": "Reinforcement callout",
      "value": "12-531",
      "unit": "",
      "appliesTo": "531"
    },
    {
      "label": "Spacing",
      "value": "3 1/2\"",
      "unit": "",
      "appliesTo": "Column 2"
    },
    {
      "label": "Horizontal dimension",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Horizontal dimension",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "Bent cap"
    },
    {
      "label": "Reinforcement spacing",
      "value": "9-630 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "630"
    },
    {
      "label": "Reinforcement spacing",
      "value": "9-631 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "631"
    },
    {
      "label": "Reinforcement spacing",
      "value": "9-630 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "630"
    },
    {
      "label": "Reinforcement spacing",
      "value": "9-631 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "631"
    },
    {
      "label": "Reinforcement spacing",
      "value": "7-630 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "630"
    },
    {
      "label": "Reinforcement spacing",
      "value": "7-631 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "631"
    },
    {
      "label": "Reinforcement spacing",
      "value": "14-630 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "630"
    },
    {
      "label": "Reinforcement spacing",
      "value": "14-631 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "631"
    },
    {
      "label": "Reinforcement callout",
      "value": "12-1131 SERIES",
      "unit": "",
      "appliesTo": "1131"
    },
    {
      "label": "Vertical dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "Vertical dimension",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "Vertical dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "Vertical dimension",
      "value": "9'-6\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "Reinforcement callout",
      "value": "12-1130 SERIES",
      "unit": "",
      "appliesTo": "1130"
    },
    {
      "label": "Reinforcement spacing",
      "value": "14-430 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "430"
    },
    {
      "label": "Vertical dimension",
      "value": "4'-8\"",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Vertical dimension",
      "value": "1'-9\"",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Cover dimension",
      "value": "4\", TYP.",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Cover dimension",
      "value": "3\" CL., TYP.",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Reinforcement spacing",
      "value": "18-930 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "930"
    },
    {
      "label": "Horizontal dimension",
      "value": "4'-9\" TYP.",
      "unit": "",
      "appliesTo": "Column 2 footing"
    },
    {
      "label": "Horizontal dimension",
      "value": "3'-6\" TYP.",
      "unit": "",
      "appliesTo": "Column 2 footing"
    },
    {
      "label": "Vertical dimension",
      "value": "4'-0\" TYP.",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Vertical dimension",
      "value": "1'-0\" TYP.",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Horizontal dimension",
      "value": "13'-0\" SQUARE TYP.",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Elevation",
      "value": "EL. 151.00, TYP.",
      "unit": "",
      "appliesTo": "Footing"
    }
  ],
  "notes": [
    "MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 511",
    "* REQUIRED CONSTRUCTION JOINT. AT CONTRACTOR'S OPTION, CONSTRUCTION JOINT MAY BE RELOCATED TO TOP OF FOOTING.",
    "* CONST. JT., TYP."
  ],
  "labels": [
    "A",
    "B",
    "C",
    "ELEVATION",
    "(BENT 3 LEFT LOOKING AHEAD)"
  ],
  "description": "This crop is an elevation of Bent 3, left looking ahead. It shows a stepped/sloping bent cap supported by Column 1 and Column 2, with reinforced concrete footings below; the left column and footing are reinforced in detail while the right footing is shown typical. Reinforcing-bar marks, elevation callouts, dimensions, construction-joint information, and a mechanical-coupler note are included."
}

p15_r04 elevation of bent 3 left columns and footingElevation

  • Mechanical coupler×1Typical mechanical coupler indicated in Column 1.

44-431 AT EQ. SPS. Reinforcement spacingEL. 185.79 (AH) ElevationEL. 185.24 (BK) ElevationEL. 185.98 (AH) ElevationEL. 185.44 (BK) ElevationEL. 186.14 (AH) ElevationEL. 185.60 (BK) ElevationEL. 186.30 (AH) Elevation+63 more