Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Load Plate

1 page · 6 crops · ×4 · superstructure

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a load plate component class.

How the sheets named it

Load platesload plates

Every dimension read for it5

  • 3/16”Load plate thicknessp12 · p12_r04
  • 3/16"load plate thicknessp12 · p12_r06
  • 3/16”load plate thicknessp12 · p12_r04 notes of bearing pad design notes
  • 3/16"Load plate thicknessp12 · p12_r06 notes of bearing pad design notes
  • 3/16 "load plates thicknessp12 · p12_r11 bearing pad

Notes on the sheets that carry it

  • p121. BEARING PADS HAVE BEEN DESIGNED ACCORDING TO AASHTO LRFD BRIDGE DESIGN SPECIFICATIONS, SECTION 14.7.6 METHOD A AND SHALL BE FURNISHED IN ACCORDANCE WITH AASHTO LRFD BRIDGE CONSTRUCTION SPECIFICATIONS, SECTION 18, BEARING DEVICES.
  • p122. 1 1/2” DIAMETER SMOOTH DOWELS SHALL BE ASTM A709 GRADE 50.
  • p123. BEARING PADS SHALL BE MADE OF 60 DUROMETER HARDNESS NEOPRENE, GRADE 2 OR HIGHER.
  • p124. 3” DIAMETER HOLE IN BEARING PADS MAY BE FORMED OR DRILLED.
  • p125. BEARING PADS SHALL HAVE 1/4” COVER ON THE TOP, BOTTOM, AND SIDES AND AROUND THE HOLE.
  • p126. 3/16” LOAD PLATES AND 12 GAGE INTERNAL PLATE(S) (IF REQUIRED) SHALL BE ASTM A709 GRADE 36 OR ASTM A1011 GRADE 36.
  • p127. NUMBER OF INTERNAL PLATES SHOWN FOR ILLUSTRATION PURPOSES ONLY. THE NUMBER OF INTERNAL PLATE(S) SPECIFIED SHALL BE EQUALLY SPACED BETWEEN LOAD PLATES.
  • p128. USE OF 1 1/2° MOLD DRAFT IS OPTIONAL.
  • p129. BEVELED SHIM PLATES SHALL BE ASTM A709 GRADE 36 AND SHALL BE GALVANIZED IN ACCORDANCE WITH ASTM A123.
  • p123/16" LOAD PLATES, TOP AND BOTTOM
  • p123/16" SEALING RIB, TOP AND BOTTOM
  • p1212 GAGE INTERNAL PLATES
  • p122. 1/2” DIAMETER SMOOTH DOWELS SHALL BE ASTM A709 GRADE 50.

Every crop it was read in — the drawing beside what the model took off it

Page 12

crop

p12_r04

page 12 · bearing_pad_design_notes_p12_r04
Original
p12_r04
{
  "view": "Notes",
  "objects": [
    {
      "name": "Bearing pads",
      "tag": "",
      "shape": "",
      "material": "60 durometer hardness neoprene, Grade 2 or higher",
      "count": null,
      "note": "Designed per AASHTO LRFD Bridge Design Specifications, Section 14.7.6 Method A."
    },
    {
      "name": "Smooth dowels",
      "tag": "",
      "shape": "circular",
      "material": "ASTM A709 Grade 50",
      "count": null,
      "note": ""
    },
    {
      "name": "Holes in bearing pads",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "May be formed or drilled."
    },
    {
      "name": "Load plates",
      "tag": "",
      "shape": "",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": ""
    },
    {
      "name": "Internal plates",
      "tag": "",
      "shape": "",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": "Number shown is for illustration purposes only; specified plates shall be equally spaced between load plates."
    },
    {
      "name": "Beveled shim plates",
      "tag": "",
      "shape": "beveled",
      "material": "ASTM A709 Grade 36",
      "count": null,
      "note": "Shall be galvanized in accordance with ASTM A123."
    }
  ],
  "measurements": [
    {
      "label": "Smooth dowel diameter",
      "value": "1 1/2”",
      "unit": "",
      "appliesTo": "Smooth dowels"
    },
    {
      "label": "Bearing pad hardness",
      "value": "60",
      "unit": "durometer",
      "appliesTo": "Bearing pads"
    },
    {
      "label": "Hole diameter",
      "value": "3”",
      "unit": "",
      "appliesTo": "Holes in bearing pads"
    },
    {
      "label": "Bearing pad cover",
      "value": "1/4”",
      "unit": "",
      "appliesTo": "Bearing pads"
    },
    {
      "label": "Load plate thickness",
      "value": "3/16”",
      "unit": "",
      "appliesTo": "Load plates"
    },
    {
      "label": "Internal plate gage",
      "value": "12",
      "unit": "GAGE",
      "appliesTo": "Internal plates"
    },
    {
      "label": "Mold draft",
      "value": "1 1/2°",
      "unit": "",
      "appliesTo": "Bearing pads"
    }
  ],
  "notes": [
    "1. BEARING PADS HAVE BEEN DESIGNED ACCORDING TO AASHTO LRFD BRIDGE DESIGN SPECIFICATIONS, SECTION 14.7.6 METHOD A AND SHALL BE FURNISHED IN ACCORDANCE WITH AASHTO LRFD BRIDGE CONSTRUCTION SPECIFICATIONS, SECTION 18, BEARING DEVICES.",
    "2. 1 1/2” DIAMETER SMOOTH DOWELS SHALL BE ASTM A709 GRADE 50.",
    "3. BEARING PADS SHALL BE MADE OF 60 DUROMETER HARDNESS NEOPRENE, GRADE 2 OR HIGHER.",
    "4. 3” DIAMETER HOLE IN BEARING PADS MAY BE FORMED OR DRILLED.",
    "5. BEARING PADS SHALL HAVE 1/4” COVER ON THE TOP, BOTTOM, AND SIDES AND AROUND THE HOLE.",
    "6. 3/16” LOAD PLATES AND 12 GAGE INTERNAL PLATE(S) (IF REQUIRED) SHALL BE ASTM A709 GRADE 36 OR ASTM A1011 GRADE 36.",
    "7. NUMBER OF INTERNAL PLATES SHOWN FOR ILLUSTRATION PURPOSES ONLY. THE NUMBER OF INTERNAL PLATE(S) SPECIFIED SHALL BE EQUALLY SPACED BETWEEN LOAD PLATES.",
    "8. USE OF 1 1/2° MOLD DRAFT IS OPTIONAL.",
    "9. BEVELED SHIM PLATES SHALL BE ASTM A709 GRADE 36 AND SHALL BE GALVANIZED IN ACCORDANCE WITH ASTM A123."
  ],
  "labels": [
    "NOTES"
  ],
  "description": "This crop is a notes block for bridge bearing pads and associated dowels, plates, and shim plates. It documents bearing-pad design criteria, material requirements, dimensions, fabrication provisions, and applicable AASHTO/ASTM specifications."
}

p12_r04Notes

  • Load platesASTM A709 Grade 36 or ASTM A1011 Grade 36

1 1/2” Smooth dowel diameter60 durometer Bearing pad hardness3” Hole diameter1/4” Bearing pad cover3/16” Load plate thickness12 GAGE Internal plate gage1 1/2° Mold draft

crop

p12_r06

page 12 · bearing_pad_design_notes_p12_r06
Original
p12_r06
{
  "view": "Notes",
  "objects": [
    {
      "name": "load plates",
      "tag": "",
      "shape": "",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": "Thickness specified in Note 6."
    },
    {
      "name": "internal plate(s)",
      "tag": "",
      "shape": "",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": "If required; equally spaced between load plates."
    }
  ],
  "measurements": [
    {
      "label": "load plate thickness",
      "value": "3/16\"",
      "unit": "",
      "appliesTo": "load plates"
    },
    {
      "label": "internal plate gage",
      "value": "12",
      "unit": "GAGE",
      "appliesTo": "internal plate(s)"
    }
  ],
  "notes": [
    "6. 3/16\" LOAD PLATES AND 12 GAGE INTERNAL PLATE(S) (IF REQUIRED) SHALL BE ASTM A709 GRADE 36 OR ASTM A1011 GRADE 36.",
    "7. NUMBER OF INTERNAL PLATES SHOWN FOR ILLUSTRATION PURPOSES ONLY. THE NUMBER OF INTERNAL PLATE(S) SPECIFIED SHALL BE EQUALLY SPACED BETWEEN LOAD PLATES."
  ],
  "labels": [],
  "description": "This crop is a notes block containing Notes 6 and 7 for bearing plate components. It specifies load-plate and internal-plate material and states that illustrated internal plate quantities are for illustration only and are to be equally spaced between load plates."
}

p12_r06Notes

  • load platesASTM A709 Grade 36 or ASTM A1011 Grade 36Thickness specified in Note 6.

3/16" load plate thickness12 GAGE internal plate gage

crop

p12_r11

page 12 · bearing_pad_p12_r11
Original
p12_r11
{
  "view": "Cross Section",
  "objects": [
    {
      "name": "bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown as a layered pad with a central thickness dimension marked T."
    },
    {
      "name": "load plate",
      "tag": "",
      "shape": "rectangular plate",
      "material": "",
      "count": 2,
      "note": "Top and bottom load plates are called out."
    },
    {
      "name": "sealing rib",
      "tag": "",
      "shape": "linear rib",
      "material": "",
      "count": 2,
      "note": "Top and bottom sealing ribs are called out."
    },
    {
      "name": "internal plate",
      "tag": "",
      "shape": "rectangular plate",
      "material": "",
      "count": 8,
      "note": "Eight internal plate elements are visibly depicted, four at each end of the pad."
    }
  ],
  "measurements": [
    {
      "label": "load plate thickness",
      "value": "3/16\"",
      "unit": "",
      "appliesTo": "load plates, top and bottom"
    },
    {
      "label": "sealing rib thickness",
      "value": "3/16\"",
      "unit": "",
      "appliesTo": "sealing rib, top and bottom"
    },
    {
      "label": "internal plate gauge",
      "value": "12",
      "unit": "GAGE",
      "appliesTo": "internal plates"
    }
  ],
  "notes": [
    "3/16\" LOAD PLATES, TOP AND BOTTOM",
    "3/16\" SEALING RIB, TOP AND BOTTOM",
    "12 GAGE INTERNAL PLATES"
  ],
  "labels": [
    "T",
    "BEARING PAD"
  ],
  "description": "This crop shows a cross-sectional detail of a rectangular bearing pad. The detail identifies top and bottom load plates and sealing ribs, plus 12 gauge internal plates and a variable thickness denoted T."
}

p12_r11Cross Section

  • load plate×2rectangular plateTop and bottom load plates are called out.

3/16" load plate thickness3/16" sealing rib thickness12 GAGE internal plate gauge

crop

p12_r04 notes of bearing pad design notes

page 12 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p12_r04_notes_of_bearing_pad_design_notes
Original
p12_r04 notes of bearing pad design notes
{
  "view": "Notes",
  "objects": [
    {
      "name": "bearing pads",
      "tag": "",
      "shape": "",
      "material": "60 durometer hardness neoprene, Grade 2 or higher",
      "count": null,
      "note": "Designed and furnished to AASHTO LRFD bridge specifications."
    },
    {
      "name": "smooth dowels",
      "tag": "",
      "shape": "circular",
      "material": "ASTM A709 Grade 50",
      "count": null,
      "note": ""
    },
    {
      "name": "load plates",
      "tag": "",
      "shape": "plate",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": ""
    },
    {
      "name": "internal plates",
      "tag": "",
      "shape": "plate",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": "Required internal plates are to be equally spaced between load plates."
    },
    {
      "name": "beveled shim plates",
      "tag": "",
      "shape": "beveled plate",
      "material": "ASTM A709 Grade 36",
      "count": null,
      "note": "To be galvanized in accordance with ASTM A123."
    }
  ],
  "measurements": [
    {
      "label": "smooth dowel diameter",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "smooth dowels"
    },
    {
      "label": "bearing pad hardness",
      "value": "60",
      "unit": "durometer",
      "appliesTo": "bearing pads"
    },
    {
      "label": "hole diameter",
      "value": "3”",
      "unit": "",
      "appliesTo": "bearing pads"
    },
    {
      "label": "cover",
      "value": "1/4”",
      "unit": "",
      "appliesTo": "bearing pads"
    },
    {
      "label": "load plate thickness",
      "value": "3/16”",
      "unit": "",
      "appliesTo": "load plates"
    },
    {
      "label": "internal plate gage",
      "value": "12",
      "unit": "GAGE",
      "appliesTo": "internal plates"
    },
    {
      "label": "mold draft",
      "value": "1 1/2°",
      "unit": "",
      "appliesTo": "bearing pads"
    }
  ],
  "notes": [
    "1. BEARING PADS HAVE BEEN DESIGNED ACCORDING TO AASHTO LRFD BRIDGE DESIGN SPECIFICATIONS, SECTION 14.7.6 METHOD A AND SHALL BE FURNISHED IN ACCORDANCE WITH AASHTO LRFD BRIDGE CONSTRUCTION SPECIFICATIONS, SECTION 18, BEARING DEVICES.",
    "2. 1/2” DIAMETER SMOOTH DOWELS SHALL BE ASTM A709 GRADE 50.",
    "3. BEARING PADS SHALL BE MADE OF 60 DUROMETER HARDNESS NEOPRENE, GRADE 2 OR HIGHER.",
    "4. 3” DIAMETER HOLE IN BEARING PADS MAY BE FORMED OR DRILLED.",
    "5. BEARING PADS SHALL HAVE 1/4” COVER ON THE TOP, BOTTOM, AND SIDES AND AROUND THE HOLE.",
    "6. 3/16” LOAD PLATES AND 12 GAGE INTERNAL PLATE(S) (IF REQUIRED) SHALL BE ASTM A709 GRADE 36 OR ASTM A1011 GRADE 36.",
    "7. NUMBER OF INTERNAL PLATES SHOWN FOR ILLUSTRATION PURPOSES ONLY. THE NUMBER OF INTERNAL PLATE(S) SPECIFIED SHALL BE EQUALLY SPACED BETWEEN LOAD PLATES.",
    "8. USE OF 1 1/2° MOLD DRAFT IS OPTIONAL.",
    "9. BEVELED SHIM PLATES SHALL BE ASTM A709 GRADE 36 AND SHALL BE GALVANIZED IN ACCORDANCE WITH ASTM A123."
  ],
  "labels": [
    "NOTES"
  ],
  "description": "This crop is a notes block for bridge bearing pads and associated bearing components. It specifies materials, dimensions, fabrication provisions, internal and load plates, dowels, and shim plate galvanizing requirements."
}

p12_r04 notes of bearing pad design notesNotes

  • load platesplateASTM A709 Grade 36 or ASTM A1011 Grade 36

1/2” smooth dowel diameter60 durometer bearing pad hardness3” hole diameter1/4” cover3/16” load plate thickness12 GAGE internal plate gage1 1/2° mold draft

crop

p12_r06 notes of bearing pad design notes

page 12 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p12_r06_notes_of_bearing_pad_design_notes
Original
p12_r06 notes of bearing pad design notes
{
  "view": "Notes",
  "objects": [
    {
      "name": "load plates",
      "tag": "",
      "shape": "",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": ""
    },
    {
      "name": "internal plates",
      "tag": "",
      "shape": "",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": "If required."
    }
  ],
  "measurements": [
    {
      "label": "Load plate thickness",
      "value": "3/16\"",
      "unit": "",
      "appliesTo": "load plates"
    },
    {
      "label": "Internal plate gage",
      "value": "12",
      "unit": "GAGE",
      "appliesTo": "internal plates"
    }
  ],
  "notes": [
    "6. 3/16\" LOAD PLATES AND 12 GAGE INTERNAL PLATE(S) (IF REQUIRED) SHALL BE ASTM A709 GRADE 36 OR ASTM A1011 GRADE 36."
  ],
  "labels": [],
  "description": "This crop contains a material and thickness note for load plates and internal plates. It specifies 3/16-inch load plates and 12 gage internal plates, if required."
}

p12_r06 notes of bearing pad design notesNotes

  • load platesASTM A709 Grade 36 or ASTM A1011 Grade 36

3/16" Load plate thickness12 GAGE Internal plate gage

crop

p12_r11 bearing pad

page 12 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p12_r11_bearing_pad
Original
p12_r11 bearing pad
{
  "view": "Detail",
  "objects": [
    {
      "name": "bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Sectional detail showing load plates, sealing ribs, and internal plates."
    },
    {
      "name": "load plates",
      "tag": "",
      "shape": "rectangular plates",
      "material": "",
      "count": 2,
      "note": "Top and bottom load plates."
    },
    {
      "name": "sealing rib",
      "tag": "",
      "shape": "horizontal rib",
      "material": "",
      "count": null,
      "note": "Shown at top and bottom; individual ribs are not fully distinguishable as separate tagged items."
    },
    {
      "name": "internal plates",
      "tag": "",
      "shape": "horizontal plates",
      "material": "",
      "count": 12,
      "note": "Called out as 12 gage internal plates."
    }
  ],
  "measurements": [
    {
      "label": "load plates thickness",
      "value": "3/16",
      "unit": "\"",
      "appliesTo": "load plates"
    },
    {
      "label": "sealing rib thickness",
      "value": "3/16",
      "unit": "\"",
      "appliesTo": "sealing rib"
    },
    {
      "label": "internal plate gage",
      "value": "12",
      "unit": "GAGE",
      "appliesTo": "internal plates"
    }
  ],
  "notes": [
    "3/16\" LOAD PLATES, TOP AND BOTTOM",
    "3/16\" SEALING RIB, TOP AND BOTTOM",
    "12 GAGE INTERNAL PLATES"
  ],
  "labels": [
    "BEARING PAD"
  ],
  "description": "This crop shows a sectional detail of a rectangular bearing pad. The detail identifies 3/16-inch top and bottom load plates, 3/16-inch top and bottom sealing ribs, and 12 gage internal plates."
}

p12_r11 bearing padDetail

  • load plates×2rectangular platesTop and bottom load plates.

3/16 " load plates thickness3/16 " sealing rib thickness12 GAGE internal plate gage