Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Fence Rail

1 page · 4 crops · ×3 · railing

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a fence rail component class.

How the sheets named it

railshorizontal railrail

Every dimension read for it3

  • 1⅝″ DIA.pipe diameterp8 · p08_r05 elevation of chain link fence panel with tension bars
  • 45°anglenot attributedp8 · p08_r05 elevation of chain link fence panel with tension bars
  • 1 5/8"DIA.p8 · p08_r05

Notes on the sheets that carry it

  • p81. FENCE SHALL BE 9 GAGE CHAIN LINK ZINC COATED TWO INCH SECURITY FENCE.
  • p82. CAST 4” DIA. GALVANIZED SLEEVE IN THE PARAPET. ALLOW NON-SHRINK, NON-METALLIC GROUT TO CURE FOR THREE DAYS BEFORE FENCE FABRIC IS INSTALLED.
  • p83. APPLY GALVANIZING REPAIR COMPOUND, IN ACCORDANCE WITH GEORGIA DOT SPECIFICATION 645, TO ENDS OF 4” DIA. GALVANIZED SLEEVES.
  • p84. PROVIDE EXPANSION SLEEVE FOR ALL RAILS TO MATCH SUPERSTRUCTURE JOINTS.
  • p85. FASTEN FABRIC TO POSTS AT INTERVALS NOT GREATER THAN 14”.
  • p86. SPACE POSTS AT A MINIMUM OF 7’-0” AND A MAXIMUM OF 10’-0”. PLACE POSTS 1’-0” MINIMUM FROM JOINTS IN BARRIER. SEE DECK PLAN FOR POST SPACING.
  • p87. FOR FURTHER DETAILS, SEE GEORGIA DOT SPECIFICATIONS SECTIONS 643 AND 894.
  • p8TENSION BAR BANDS AT 12″ O.C. MAX.
  • p8TENSION BAR ZINC COATED
  • p8ZINC COATED FENCE
  • p81⅝″ DIA. PIPE ZINC COATED
  • p82⅞″ DIA. PIPE, TYP.
  • p8TRUSS BRACING AT END OR PULL
  • p8POST VERT. ZINC COATED
  • p8½″ OFFSET
  • p84″ DIA. STD. WT. PIPE SLEEVE
  • p81 5/8" DIA. PIPE ZINC COATED
  • p82 7/8" DIA. PIPE, TYP.
  • p81/2" OFFSET
  • p8* NON-SHRINK,
  • p8IN ACCORDAN
  • p8POSITIVE DR

Every crop it was read in — the drawing beside what the model took off it

Page 8

crop

p08_r03 text notes specifying chain link security fence requirements

page 8 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p08_r03_text_notes_specifying_chain_link_security_fence_requirements
Original
p08_r03 text notes specifying chain link security fence requirements
{
  "view": "Notes",
  "objects": [
    {
      "name": "security fence",
      "tag": "",
      "shape": "",
      "material": "9 gage chain link, zinc coated",
      "count": null,
      "note": "Two inch security fence."
    },
    {
      "name": "galvanized sleeve",
      "tag": "",
      "shape": "circular",
      "material": "galvanized",
      "count": null,
      "note": "Cast in parapet; 4” diameter."
    },
    {
      "name": "parapet",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Sleeves are to be cast in parapet."
    },
    {
      "name": "fence fabric",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Fastened to posts."
    },
    {
      "name": "fence posts",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Post spacing and location relative to barrier joints are specified."
    },
    {
      "name": "rails",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Provide expansion sleeve for rails at superstructure joints."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Posts are to be placed minimum 1'-0” from joints in barrier."
    }
  ],
  "measurements": [
    {
      "label": "fence gage",
      "value": "9",
      "unit": "GAGE",
      "appliesTo": "security fence"
    },
    {
      "label": "security fence size",
      "value": "TWO",
      "unit": "INCH",
      "appliesTo": "security fence"
    },
    {
      "label": "sleeve diameter",
      "value": "4”",
      "unit": "DIA.",
      "appliesTo": "galvanized sleeve"
    },
    {
      "label": "sleeve diameter",
      "value": "4”",
      "unit": "DIA.",
      "appliesTo": "galvanized sleeves"
    },
    {
      "label": "maximum fabric fastening interval",
      "value": "14”",
      "unit": "",
      "appliesTo": "fence fabric"
    },
    {
      "label": "minimum post spacing",
      "value": "7’-0”",
      "unit": "",
      "appliesTo": "fence posts"
    },
    {
      "label": "maximum post spacing",
      "value": "10’-0”",
      "unit": "",
      "appliesTo": "fence posts"
    },
    {
      "label": "minimum post distance from barrier joints",
      "value": "1’-0”",
      "unit": "",
      "appliesTo": "fence posts"
    },
    {
      "label": "grout cure duration",
      "value": "THREE",
      "unit": "DAYS",
      "appliesTo": "non-shrink, non-metallic grout"
    }
  ],
  "notes": [
    "1. FENCE SHALL BE 9 GAGE CHAIN LINK ZINC COATED TWO INCH SECURITY FENCE.",
    "2. CAST 4” DIA. GALVANIZED SLEEVE IN THE PARAPET. ALLOW NON-SHRINK, NON-METALLIC GROUT TO CURE FOR THREE DAYS BEFORE FENCE FABRIC IS INSTALLED.",
    "3. APPLY GALVANIZING REPAIR COMPOUND, IN ACCORDANCE WITH GEORGIA DOT SPECIFICATION 645, TO ENDS OF 4” DIA. GALVANIZED SLEEVES.",
    "4. PROVIDE EXPANSION SLEEVE FOR ALL RAILS TO MATCH SUPERSTRUCTURE JOINTS.",
    "5. FASTEN FABRIC TO POSTS AT INTERVALS NOT GREATER THAN 14”.",
    "6. SPACE POSTS AT A MINIMUM OF 7’-0” AND A MAXIMUM OF 10’-0”. PLACE POSTS 1’-0” MINIMUM FROM JOINTS IN BARRIER. SEE DECK PLAN FOR POST SPACING.",
    "7. FOR FURTHER DETAILS, SEE GEORGIA DOT SPECIFICATIONS SECTIONS 643 AND 894."
  ],
  "labels": [
    "FENCE NOTES:",
    "SECTION THRU ENDWALL",
    "(LOOKING AHEAD, LEFT BRIDGE SHOWN, RIGHT BRIDGE SIMILAR)"
  ],
  "description": "This crop is primarily a fence-notes block for a bridge security fence installation. A heading identifies a section through endwall, looking ahead with the left bridge shown and right bridge similar, but no graphical section detail is visible in this crop."
}

p08_r03 text notes specifying chain link security fence requirementsNotes

  • railsProvide expansion sleeve for rails at superstructure joints.

9 GAGE fence gageTWO INCH security fence size4” DIA. sleeve diameter4” DIA. sleeve diameter14” maximum fabric fastening interval7’-0” minimum post spacing10’-0” maximum post spacing1’-0” minimum post distance from barrier joints+1 more

crop

p08_r05 elevation of chain link fence panel with tension bars

page 8 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p08_r05_elevation_of_chain_link_fence_panel_with_tension_bars
Original
p08_r05 elevation of chain link fence panel with tension bars
{
  "view": "Elevation",
  "objects": [
    {
      "name": "chain-link fence fabric",
      "tag": "",
      "shape": "diamond mesh panels",
      "material": "zinc coated",
      "count": 2,
      "note": "Two fence bays are visible in the main elevation."
    },
    {
      "name": "end/pull post",
      "tag": "",
      "shape": "circular pipe",
      "material": "zinc coated",
      "count": 1,
      "note": "Shown at the left end of the fence elevation."
    },
    {
      "name": "line post",
      "tag": "",
      "shape": "circular pipe",
      "material": "zinc coated",
      "count": 1,
      "note": "Vertical post shown between the two fence bays."
    },
    {
      "name": "horizontal rail",
      "tag": "",
      "shape": "circular pipe",
      "material": "zinc coated",
      "count": null,
      "note": "Top, intermediate, and bottom horizontal rails are shown."
    },
    {
      "name": "truss bracing",
      "tag": "",
      "shape": "diagonal circular pipe",
      "material": "zinc coated",
      "count": 1,
      "note": "Diagonal brace shown from the lower end-post area to the intermediate-post area."
    },
    {
      "name": "tension bar",
      "tag": "",
      "shape": "flat bar",
      "material": "zinc coated",
      "count": 1,
      "note": "Shown at the left end post."
    },
    {
      "name": "tension bar bands",
      "tag": "",
      "shape": "bands",
      "material": "",
      "count": null,
      "note": "Attached at the left end post."
    },
    {
      "name": "pipe sleeve",
      "tag": "",
      "shape": "circular pipe sleeve",
      "material": "standard weight pipe",
      "count": 2,
      "note": "Sleeves are shown below the two posts in the main elevation."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "rectangular elevation",
      "material": "",
      "count": null,
      "note": "Supporting barrier is shown below the fence."
    },
    {
      "name": "slab",
      "tag": "",
      "shape": "rectangular elevation",
      "material": "",
      "count": null,
      "note": "Shown below the barrier."
    }
  ],
  "measurements": [
    {
      "label": "tension bar band spacing",
      "value": "12″ O.C. MAX.",
      "unit": "",
      "appliesTo": "tension bar bands"
    },
    {
      "label": "pipe diameter",
      "value": "1⅝″ DIA.",
      "unit": "",
      "appliesTo": "horizontal rail"
    },
    {
      "label": "pipe diameter",
      "value": "2⅞″ DIA.",
      "unit": "",
      "appliesTo": "end/pull post and line post"
    },
    {
      "label": "horizontal distance",
      "value": "1′-0″",
      "unit": "",
      "appliesTo": "end post / construction joint"
    },
    {
      "label": "offset",
      "value": "½″",
      "unit": "",
      "appliesTo": "bottom rail"
    },
    {
      "label": "pipe sleeve depth",
      "value": "1′-0″",
      "unit": "",
      "appliesTo": "pipe sleeve"
    },
    {
      "label": "fence height",
      "value": "5′-1″",
      "unit": "",
      "appliesTo": "fence"
    },
    {
      "label": "fence height",
      "value": "4′-7″",
      "unit": "",
      "appliesTo": "fence"
    },
    {
      "label": "pipe sleeve diameter",
      "value": "4″ DIA.",
      "unit": "",
      "appliesTo": "pipe sleeve"
    },
    {
      "label": "angle",
      "value": "45°",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "scale",
      "value": "¾″ = 1′-0″",
      "unit": "",
      "appliesTo": "FENCE ELEVATION"
    }
  ],
  "notes": [
    "TENSION BAR BANDS AT 12″ O.C. MAX.",
    "TENSION BAR ZINC COATED",
    "ZINC COATED FENCE",
    "1⅝″ DIA. PIPE ZINC COATED",
    "2⅞″ DIA. PIPE, TYP.",
    "TRUSS BRACING AT END OR PULL",
    "POST VERT. ZINC COATED",
    "½″ OFFSET",
    "4″ DIA. STD. WT. PIPE SLEEVE"
  ],
  "labels": [
    "CONST. JOINT",
    "FENCE ELEVATION",
    "SCALE: ¾″ = 1′-0″"
  ],
  "description": "This crop shows a fence elevation mounted on a barrier and slab, with zinc-coated chain-link fabric, pipe posts and rails, tension-bar bands, and diagonal truss bracing at the end or pull post. A partial adjacent fence-related detail is visible at the right edge, showing a post in a pipe sleeve and a 45° indication; its remaining text and dimensions are cropped."
}

p08_r05 elevation of chain link fence panel with tension barsElevation

  • horizontal railcircular pipezinc coatedTop, intermediate, and bottom horizontal rails are shown.

12″ O.C. MAX. tension bar band spacing1⅝″ DIA. pipe diameter2⅞″ DIA. pipe diameter1′-0″ horizontal distance½″ offset1′-0″ pipe sleeve depth5′-1″ fence height4′-7″ fence height+3 more

crop

p08_r03

page 8 · security_fence_p08_r03
Original
p08_r03
{
  "view": "Notes",
  "objects": [
    {
      "name": "security fence",
      "tag": "",
      "shape": "chain link",
      "material": "zinc coated",
      "count": null,
      "note": "Specified as 9 gage, two inch security fence."
    },
    {
      "name": "galvanized sleeve",
      "tag": "",
      "shape": "circular",
      "material": "galvanized",
      "count": null,
      "note": "Cast in parapet; specified as 4\" diameter."
    },
    {
      "name": "parapet",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Receives cast galvanized sleeves."
    },
    {
      "name": "fence fabric",
      "tag": "",
      "shape": "chain link",
      "material": "",
      "count": null,
      "note": "Fastened to posts."
    },
    {
      "name": "fence post",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Spacing and location relative to barrier joints are specified."
    },
    {
      "name": "rail",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Expansion sleeve required at superstructure joints."
    },
    {
      "name": "expansion sleeve",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Provided for all rails at superstructure joints."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Posts are to be placed a minimum distance from joints in barrier."
    },
    {
      "name": "superstructure joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Rail expansion sleeves are to match these joints."
    }
  ],
  "measurements": [
    {
      "label": "fence wire gage",
      "value": "9",
      "unit": "GAGE",
      "appliesTo": "security fence"
    },
    {
      "label": "security fence size",
      "value": "TWO",
      "unit": "INCH",
      "appliesTo": "security fence"
    },
    {
      "label": "galvanized sleeve diameter",
      "value": "4\"",
      "unit": "DIA.",
      "appliesTo": "galvanized sleeve"
    },
    {
      "label": "grout curing period",
      "value": "THREE",
      "unit": "DAYS",
      "appliesTo": "galvanized sleeve"
    },
    {
      "label": "maximum fence fabric fastening interval",
      "value": "14\"",
      "unit": "",
      "appliesTo": "fence fabric"
    },
    {
      "label": "minimum post spacing",
      "value": "7'-0\"",
      "unit": "",
      "appliesTo": "fence post"
    },
    {
      "label": "maximum post spacing",
      "value": "10'-0\"",
      "unit": "",
      "appliesTo": "fence post"
    },
    {
      "label": "minimum post distance from joints in barrier",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "fence post"
    }
  ],
  "notes": [
    "1. FENCE SHALL BE 9 GAGE CHAIN LINK ZINC COATED TWO INCH SECURITY FENCE.",
    "2. CAST 4\" DIA. GALVANIZED SLEEVE IN THE PARAPET. ALLOW NON-SHRINK, NON-METALLIC GROUT TO CURE FOR THREE DAYS BEFORE FENCE FABRIC IS INSTALLED.",
    "3. APPLY GALVANIZING REPAIR COMPOUND, IN ACCORDANCE WITH GEORGIA DOT SPECIFICATION 645, TO ENDS OF 4\" DIA. GALVANIZED SLEEVES.",
    "4. PROVIDE EXPANSION SLEEVE FOR ALL RAILS TO MATCH SUPERSTRUCTURE JOINTS.",
    "5. FASTEN FABRIC TO POSTS AT INTERVALS NOT GREATER THAN 14\".",
    "6. SPACE POSTS AT A MINIMUM OF 7'-0\" AND A MAXIMUM OF 10'-0\". PLACE POSTS 1'-0\" MINIMUM FROM JOINTS IN BARRIER. SEE DECK PLAN FOR POST SPACING.",
    "7. FOR FURTHER DETAILS, SEE GEORGIA DOT SPECIFICATIONS SECTIONS 643 AND 894."
  ],
  "labels": [
    "FENCE NOTES:",
    "SECTION THRU ENDWALL",
    "(LOOKING AHEAD, LEFT BRIDGE SHOWN, RIGHT BRIDGE SIMILAR)"
  ],
  "description": "This crop primarily contains fence installation notes for a chain-link security fence, including sleeves cast into the parapet, rail expansion sleeves, fabric fastening, and post spacing. A heading for a section through the endwall is also visible, but no section geometry is shown in this crop."
}

p08_r03Notes

  • railExpansion sleeve required at superstructure joints.

9 GAGE fence wire gageTWO INCH security fence size4" DIA. galvanized sleeve diameterTHREE DAYS grout curing period14" maximum fence fabric fastening interval7'-0" minimum post spacing10'-0" maximum post spacing1'-0" minimum post distance from joints in barrier

crop

p08_r05

page 8 · security_fence_panel_p08_r05
Original
p08_r05
{
  "view": "Elevation",
  "objects": [
    {
      "name": "chain-link fence fabric",
      "tag": "",
      "shape": "diamond mesh panels",
      "material": "zinc coated",
      "count": 2,
      "note": "Two fence fabric spans are visible; the right-hand span is cropped."
    },
    {
      "name": "pull/end post",
      "tag": "",
      "shape": "circular pipe",
      "material": "",
      "count": 1,
      "note": "Called out as 2 7/8\" PULL POST and END POST."
    },
    {
      "name": "vertical fence post",
      "tag": "",
      "shape": "circular pipe",
      "material": "zinc coated",
      "count": 1,
      "note": "Central post visible between fence spans."
    },
    {
      "name": "tension bar",
      "tag": "",
      "shape": "flat vertical bar",
      "material": "zinc coated",
      "count": 1,
      "note": "Located at the pull/end post."
    },
    {
      "name": "tension bands",
      "tag": "",
      "shape": "bands around post",
      "material": "",
      "count": 5,
      "note": "Visible on the pull/end post."
    },
    {
      "name": "fence rail",
      "tag": "",
      "shape": "circular pipe",
      "material": "zinc coated",
      "count": 3,
      "note": "Top, intermediate, and bottom horizontal rails are visible."
    },
    {
      "name": "truss bracing",
      "tag": "",
      "shape": "diagonal circular pipe",
      "material": "",
      "count": 1,
      "note": "Diagonal brace from the pull/end post to the intermediate rail at the vertical post."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "rectangular in elevation; partial formed profile at right",
      "material": "",
      "count": null,
      "note": "Fence posts are mounted at the barrier; a partial adjacent barrier detail is shown at right."
    },
    {
      "name": "slab",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown below the barrier."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "vertical joint line",
      "material": "",
      "count": 1,
      "note": "Located at the end-post barrier location."
    },
    {
      "name": "pipe sleeve",
      "tag": "",
      "shape": "circular pipe sleeve",
      "material": "standard weight pipe",
      "count": 1,
      "note": "Shown in the partial fence/barrier detail at right."
    }
  ],
  "measurements": [
    {
      "label": "TENSION BAR BANDS AT",
      "value": "12\"",
      "unit": "",
      "appliesTo": "tension bands"
    },
    {
      "label": "O.C. MAX.",
      "value": "",
      "unit": "",
      "appliesTo": "tension bands"
    },
    {
      "label": "DIA.",
      "value": "1 5/8\"",
      "unit": "",
      "appliesTo": "fence rail"
    },
    {
      "label": "DIA. PIPE, TYP.",
      "value": "2 7/8\"",
      "unit": "",
      "appliesTo": "vertical fence post"
    },
    {
      "label": "PULL POST",
      "value": "2 7/8\"",
      "unit": "",
      "appliesTo": "pull/end post"
    },
    {
      "label": "",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "end-post offset from construction joint"
    },
    {
      "label": "OFFSET",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "bottom fence rail"
    },
    {
      "label": "",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "vertical fence post embedment/sleeve depth"
    },
    {
      "label": "",
      "value": "5'-1\"",
      "unit": "",
      "appliesTo": "partial fence/barrier detail at right"
    },
    {
      "label": "",
      "value": "4'-7\"",
      "unit": "",
      "appliesTo": "partial fence/barrier detail at right"
    },
    {
      "label": "DIA. STD. WT. PIPE SLEEVE",
      "value": "4\"",
      "unit": "",
      "appliesTo": "pipe sleeve"
    },
    {
      "label": "",
      "value": "45°",
      "unit": "",
      "appliesTo": "partial fence/barrier detail at right"
    },
    {
      "label": "",
      "value": "2 7/8\"",
      "unit": "",
      "appliesTo": "partial fence/barrier detail at right"
    },
    {
      "label": "",
      "value": "7'-0",
      "unit": "",
      "appliesTo": "partial fence/barrier detail at right"
    },
    {
      "label": "SCALE",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "FENCE ELEVATION"
    }
  ],
  "notes": [
    "ZINC COATED FENCE",
    "TENSION BAR BANDS AT 12\" O.C. MAX.",
    "TENSION BAR ZINC COATED",
    "1 5/8\" DIA. PIPE ZINC COATED",
    "2 7/8\" DIA. PIPE, TYP.",
    "POST VERT. ZINC COATED",
    "TRUSS BRACING AT END OR PULL",
    "1/2\" OFFSET",
    "4\" DIA. STD. WT. PIPE SLEEVE",
    "* NON-SHRINK,",
    "IN ACCORDAN",
    "POSITIVE DR"
  ],
  "labels": [
    "FENCE ELEVATION",
    "SCALE: 3/4\" = 1'-0\"",
    "FENCE"
  ],
  "description": "The crop principally shows a fence elevation of zinc-coated chain-link fence mounted on a barrier over a slab. It includes a pull/end post, a vertical post, horizontal rails, tension-bar components, and diagonal truss bracing; a partial adjacent fence/barrier detail is visible at the right edge."
}

p08_r05Elevation

  • fence rail×3circular pipezinc coatedTop, intermediate, and bottom horizontal rails are visible.

12" TENSION BAR BANDS AT O.C. MAX.1 5/8" DIA.2 7/8" DIA. PIPE, TYP.2 7/8" PULL POST1'-0"1/2" OFFSET1'-0"+7 more