Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Dowel Hole

4 pages · 10 crops · ×48 · deck

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a dowel hole component class.

How the sheets named it

formed dowel holessmooth dowel holesmooth dowel bar holessmooth dowel bar holedowel-bar holeformed dowel-bar holeSmooth dowel holeFormed dowel holesformed dowel hole

Every dimension read for it33

  • 3" informed hole diameterp13 · bent_1_right
  • 12" informed hole depthp13 · bent_1_right
  • 1 1/2" insmooth dowel diameterp13 · bent_1_right
  • 22'-0"Distance from SR 21 WB = PGL reference linenot attributedp14 · p14_r01 plan of beam spacing at bent 2 left
  • 3"Dowel-bar hole diameterp14 · p14_r01 plan of beam spacing at bent 2 left
  • 12"Dowel-bar hole depthp14 · p14_r01 plan of beam spacing at bent 2 left
  • 1½"Smooth dowel bar diameterp14 · p14_r01 plan of beam spacing at bent 2 left
  • 2'-9⅜"Local horizontal dimensionnot attributedp14 · p14_r01 plan of beam spacing at bent 2 left
  • 11½"Vertical dimensionnot attributedp14 · p14_r01 plan of beam spacing at bent 2 left
  • 1'-2"Vertical dimensionnot attributedp14 · p14_r01 plan of beam spacing at bent 2 left
  • 2'-1½"Vertical dimensionnot attributedp14 · p14_r01 plan of beam spacing at bent 2 left
  • 3"dowel hole diameterp14 · p14_r02 plan of beam spacing at bent 2 right
  • 12"dowel hole depthp14 · p14_r02 plan of beam spacing at bent 2 right
  • 3”dowel-bar hole diameterp15 · bent_3_right
  • 12”dowel-bar hole depthp15 · bent_3_right
  • 18+63.35stationnot attributedp15 · p15_r01 plan of bent 3 left beam spacing
  • 3"dowel-bar hole diameterp15 · p15_r01 plan of bent 3 left beam spacing
  • 12"dowel-bar hole depthp15 · p15_r01 plan of bent 3 left beam spacing
  • 3"dowel-bar hole diameterp15 · p15_r02 plan of bent 3 right beam spacing
  • 12"dowel-bar hole depthp15 · p15_r02 plan of bent 3 right beam spacing
  • 3”Dowel hole diameterp17 · p17_r01 plan of beam spacing and dowels at bent 4 left
  • 12”Dowel hole depthp17 · p17_r01 plan of beam spacing and dowels at bent 4 left
  • 1 1/2”Smooth dowel diameterp17 · p17_r01 plan of beam spacing and dowels at bent 4 left
  • 22'-0”Ahead distancenot attributedp17 · p17_r01 plan of beam spacing and dowels at bent 4 left
  • 22'-0"Distance to ahead referencenot attributedp17 · p17_r02 plan of beam spacing and dowels at bent 4 right
  • 81°-20'-05.0"Skew angle, typicalnot attributedp17 · p17_r02 plan of beam spacing and dowels at bent 4 right
  • 2 3/4"Typical dimensionnot attributedp17 · p17_r02 plan of beam spacing and dowels at bent 4 right
  • 3"Formed hole diameterp17 · p17_r02 plan of beam spacing and dowels at bent 4 right
  • 12"Formed hole depthp17 · p17_r02 plan of beam spacing and dowels at bent 4 right
  • 3"Dowel hole diameterp17 · p17_r03 plan view of end bent 4 left beam layout
  • 12"Dowel hole depthp17 · p17_r03 plan view of end bent 4 left beam layout
  • 1 1/2"Smooth dowel diameterp17 · p17_r03 plan view of end bent 4 left beam layout
  • 22'-0"Distance aheadnot attributedp17 · p17_r03 plan view of end bent 4 left beam layout

Notes on the sheets that carry it

  • p13SEE DETAIL 1 BRIDGE SHEET 16
  • p13FORM 3" DIA. X 12" DEEP HOLE FOR 1 1/2" DIA. SMOOTH DOWEL, TYP.
  • p13SEE DETAIL 2 BRIDGE SHEET 16
  • p13BEGIN BRIDGE B.F.P.R. BENT 1 STA. 17+23.00
  • p13FORM 3” DIA. X 12” DEEP HOLE FOR 1½” DIA. SMOOTH DOWEL, TYP.
  • p134-#10 OVER EACH PILE
  • p14FORM 3” DIA. X 12” DEEP HOLE FOR 1½” DIA. SMOOTH DOWEL BAR, TYP.
  • p14FORM 3" DIA. X 12" DEEP HOLE FOR 1 1/2" DIA. SMOOTH DOWEL BAR, TYP.
  • p15…E BRIDGE SHEET NO.16 FOR CAP, COLUMN AND FOOTING SECTIONS. [partial at left crop edge]
  • p15…RS 432 NOT SHOWN. [partial at left crop edge]
  • p15…TEND BARS 1131A 3'-9” INTO CAP. [partial at left crop edge]
  • p15PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 222 KIPS.
  • p15ALL PILES SHALL BE STEEL H, HP 12 X 53.
  • p15ALL PILES SHALL BE DRIVEN TO A DRIVING RESISTANCE OF 342 KIPS AFTER A MINIMUM TIP ELEVATION OF 115 AT BENT 3L AND 114 AT BENT 3R IS ACHIEVED.
  • p17SEE DETAIL 3 BRIDGE SHEET 16
  • p17SEE DETAIL 4 BRIDGE SHEET 16
  • p17END BRIDGE B.F.P.R. BENT 4 STA. 19+15.00

Every crop it was read in — the drawing beside what the model took off it

Page 13

crop

bent_1_right

page 13 · bent_1_right
Original
bent_1_right
{
  "view": "Detail",
  "objects": [
    {
      "name": "bent cap",
      "tag": "",
      "shape": "long rectangular member with curved end details in plan",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown in plan and elevation for Bent 1 Right; member designation is not printed in this crop."
    },
    {
      "name": "piles",
      "tag": "",
      "shape": "H-section",
      "material": "",
      "count": 6,
      "note": "Six pile locations are visible below the bent cap in elevation."
    },
    {
      "name": "formed dowel holes",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 6,
      "note": "Typical formed holes are shown at the pile/beam-line locations in plan."
    },
    {
      "name": "reinforcement bars",
      "tag": "#10",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Callouts show 4-#10 over each pile and 4-#10."
    },
    {
      "name": "reinforcement bars",
      "tag": "#15A",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Callout: 2-#15A, TYP."
    },
    {
      "name": "reinforcement bars",
      "tag": "#15B",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Callout: 2-#15B."
    },
    {
      "name": "reinforcement bars",
      "tag": "#15C",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Callout: 2-#15C."
    },
    {
      "name": "reinforcement bars",
      "tag": "#11",
      "shape": "linear bar",
      "material": "",
      "count": null,
      "note": "Callouts specify 4-#11 at equal spaces and 7-#11 at equal spaces, typical each bay."
    }
  ],
  "measurements": [
    {
      "label": "formed hole diameter",
      "value": "3\"",
      "unit": "in",
      "appliesTo": "formed dowel holes"
    },
    {
      "label": "formed hole depth",
      "value": "12\"",
      "unit": "in",
      "appliesTo": "formed dowel holes"
    },
    {
      "label": "smooth dowel diameter",
      "value": "1 1/2\"",
      "unit": "in",
      "appliesTo": "formed dowel holes"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "Bent 1 Right"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "Bent 1 Right"
    },
    {
      "label": "dimension",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "SR 21 EB = PGL alignment"
    },
    {
      "label": "station",
      "value": "17+19.65",
      "unit": "",
      "appliesTo": "SR 21 EB = PGL"
    },
    {
      "label": "dimension",
      "value": "3'-0 5/16\"",
      "unit": "ft-in",
      "appliesTo": "left end of bent cap plan"
    },
    {
      "label": "dimension",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": "right end of bent cap plan"
    },
    {
      "label": "dimension",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "bent cap plan"
    },
    {
      "label": "dimension",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "bent cap plan"
    },
    {
      "label": "dimension",
      "value": "2'-9 3/8\"",
      "unit": "ft-in",
      "appliesTo": "bent cap plan"
    },
    {
      "label": "dimension",
      "value": "2 3/4\"",
      "unit": "in",
      "appliesTo": "bent cap plan, TYP."
    },
    {
      "label": "dimension",
      "value": "3'-0 7/8\"",
      "unit": "ft-in",
      "appliesTo": "bent cap plan end detail"
    },
    {
      "label": "dimension",
      "value": "7'-7 1/16\"",
      "unit": "ft-in",
      "appliesTo": "bent cap plan beam spacing"
    },
    {
      "label": "dimension",
      "value": "6'-10 1/2\"",
      "unit": "ft-in",
      "appliesTo": "bent cap plan"
    },
    {
      "label": "dimension",
      "value": "7'-7\"",
      "unit": "ft-in",
      "appliesTo": "bent cap plan"
    },
    {
      "label": "dimension",
      "value": "6'-10 9/16\"",
      "unit": "ft-in",
      "appliesTo": "bent cap plan"
    },
    {
      "label": "overall length",
      "value": "44'-1 1/16\"",
      "unit": "ft-in",
      "appliesTo": "Bent 1 Right bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 188.03",
      "unit": "",
      "appliesTo": "left end vertical element"
    },
    {
      "label": "elevation",
      "value": "EL. 188.10",
      "unit": "",
      "appliesTo": "left end vertical element"
    },
    {
      "label": "elevation",
      "value": "EL. 184.75",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 184.96",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.13",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.30",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.47",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.62",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 189.00",
      "unit": "",
      "appliesTo": "right end vertical element"
    },
    {
      "label": "elevation",
      "value": "EL. 189.11",
      "unit": "",
      "appliesTo": "right end vertical element"
    },
    {
      "label": "elevation",
      "value": "EL. 182.59",
      "unit": "",
      "appliesTo": "left end of bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 183.62",
      "unit": "",
      "appliesTo": "right end of bent cap"
    },
    {
      "label": "reinforcement quantity",
      "value": "4-#10",
      "unit": "",
      "appliesTo": "over each pile"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-#15A",
      "unit": "",
      "appliesTo": "reinforcement, TYP."
    },
    {
      "label": "reinforcement quantity",
      "value": "2-#15B",
      "unit": "",
      "appliesTo": "left end reinforcement"
    },
    {
      "label": "reinforcement quantity",
      "value": "2-#15C",
      "unit": "",
      "appliesTo": "right end reinforcement"
    },
    {
      "label": "reinforcement quantity",
      "value": "4-#11",
      "unit": "",
      "appliesTo": "left end reinforcement at equal spaces"
    },
    {
      "label": "reinforcement quantity",
      "value": "7-#11",
      "unit": "",
      "appliesTo": "reinforcement at equal spaces, TYP. EA. BAY"
    },
    {
      "label": "spacing",
      "value": "10\"",
      "unit": "in",
      "appliesTo": "reinforcement, TYP."
    },
    {
      "label": "dimension",
      "value": "2'-10 1/8\"",
      "unit": "ft-in",
      "appliesTo": "left end of elevation"
    },
    {
      "label": "dimension",
      "value": "7'-7 1/16\"",
      "unit": "ft-in",
      "appliesTo": "elevation beam spacing"
    },
    {
      "label": "dimension",
      "value": "3'-3 5/8\"",
      "unit": "ft-in",
      "appliesTo": "right end of elevation"
    },
    {
      "label": "overall length",
      "value": "44'-1 1/16\"",
      "unit": "ft-in",
      "appliesTo": "Bent 1 Right elevation"
    }
  ],
  "notes": [
    "SEE DETAIL 1 BRIDGE SHEET 16",
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 2 BRIDGE SHEET 16"
  ],
  "labels": [
    "PLAN",
    "(BENT 1 RIGHT)",
    "ELEVATION",
    "(BENT 1 RIGHT LOOKING BACK)",
    "AHEAD",
    "SR 21 EB = PGL",
    "℄ BRG.",
    "℄ BEAM 12",
    "℄ BEAM 11",
    "℄ BEAM 10",
    "℄ BEAM 9",
    "℄ BEAM 8",
    "℄ BEAM 7",
    "A",
    "B",
    "B.F.P.R.",
    "BEGIN B.F.P.R. STA. 17+… (partial)"
  ],
  "description": "This crop contains a plan and elevation detail of the Bent 1 Right substructure, including a continuous bent cap supported by six visible piles. The plan establishes beam centerlines, skew and cap geometry, while the elevation shows the stepped cap elevations, pile locations, reinforcement callouts, and end details."
}

bent_1_rightDetail

  • formed dowel holes×6circularTypical formed holes are shown at the pile/beam-line locations in plan.

3" in formed hole diameter12" in formed hole depth1 1/2" in smooth dowel diameter81°-20'-05.0" skew angle81°-20'-05.0" skew angle22'-0" ft-in dimension17+19.65 station3'-0 5/16" ft-in dimension+34 more

crop

p13_r02 plan of end bent 1 cap and pile spacing left side

page 13 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p13_r02_plan_of_end_bent_1_cap_and_pile_spacing_left_side
Original
p13_r02 plan of end bent 1 cap and pile spacing left side
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent cap / bent",
      "tag": "BENT 1",
      "shape": "long rectangular",
      "material": "",
      "count": 1,
      "note": "Plan is identified as BENT 1 LEFT; B.F.P.R. is shown along the long face."
    },
    {
      "name": "beam",
      "tag": "BEAM 1–BEAM 6",
      "shape": "",
      "material": "",
      "count": 6,
      "note": "Shown by six labeled beam centerlines crossing the bent."
    },
    {
      "name": "smooth dowel hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": "Four hole symbols are visible; callout states holes are typical for smooth dowels."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": "Only partial pile/detail graphics are visible below the plan."
    },
    {
      "name": "reinforcement bar",
      "tag": "#10",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Partial lower-detail callout reads 4-#10 OVER EACH PILE."
    },
    {
      "name": "reinforcement bar",
      "tag": "#12",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Partial lower-detail callout reads 2-#12."
    }
  ],
  "measurements": [
    {
      "label": "dimension",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "distance between the two shown alignment reference lines"
    },
    {
      "label": "angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "SR 21 / bridge skew angle"
    },
    {
      "label": "station",
      "value": "17+23.00",
      "unit": "",
      "appliesTo": "BEGIN BRIDGE, B.F.P.R. BENT 1"
    },
    {
      "label": "station",
      "value": "17+26.35",
      "unit": "",
      "appliesTo": "SR 21 WB = PGL, ℄ BRG."
    },
    {
      "label": "angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "bridge angle, TYP."
    },
    {
      "label": "dimension",
      "value": "15'-4¾\"",
      "unit": "",
      "appliesTo": "left end of bent"
    },
    {
      "label": "dimension",
      "value": "2'-9⅜\"",
      "unit": "",
      "appliesTo": "shown offset at left-center portion of bent"
    },
    {
      "label": "dimension",
      "value": "2¾\"",
      "unit": "",
      "appliesTo": "shown spacing, TYP."
    },
    {
      "label": "dimension",
      "value": "3'-0⅞\"",
      "unit": "",
      "appliesTo": "outer offset from bent end to beam centerline; shown at both ends"
    },
    {
      "label": "spacing",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "beam centerline spacing; repeated between shown beams"
    },
    {
      "label": "dimension",
      "value": "6'-10½\"",
      "unit": "",
      "appliesTo": "left end-to-beam-centerline layout dimension"
    },
    {
      "label": "dimension",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "beam layout dimension; repeated"
    },
    {
      "label": "dimension",
      "value": "6'-10 9/16\"",
      "unit": "",
      "appliesTo": "right beam-centerline-to-end layout dimension"
    },
    {
      "label": "dimension",
      "value": "44'-1 1/16\"",
      "unit": "",
      "appliesTo": "overall bent length"
    },
    {
      "label": "dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "B.F.P.R. offset; shown twice"
    },
    {
      "label": "dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "shown width between the two 1'-6\" offsets"
    },
    {
      "label": "dimension",
      "value": "5'-0 7/16\"",
      "unit": "",
      "appliesTo": "right end width"
    },
    {
      "label": "diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "formed hole"
    },
    {
      "label": "depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "formed hole"
    },
    {
      "label": "diameter",
      "value": "1½\"",
      "unit": "",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "elevation",
      "value": "EL. 189.16",
      "unit": "",
      "appliesTo": "partial lower detail"
    },
    {
      "label": "elevation",
      "value": "EL. 189.23",
      "unit": "",
      "appliesTo": "partial lower detail"
    },
    {
      "label": "elevation",
      "value": "EL. 185.75",
      "unit": "",
      "appliesTo": "partial lower detail"
    },
    {
      "label": "elevation",
      "value": "EL. 185.65",
      "unit": "",
      "appliesTo": "partial lower detail"
    },
    {
      "label": "quantity",
      "value": "4-#10",
      "unit": "",
      "appliesTo": "reinforcement over each pile"
    },
    {
      "label": "elevation",
      "value": "EL. 185.52",
      "unit": "",
      "appliesTo": "partial lower detail"
    },
    {
      "label": "quantity",
      "value": "2-#12",
      "unit": "",
      "appliesTo": "partial lower detail"
    },
    {
      "label": "elevation",
      "value": "EL. 185.39",
      "unit": "",
      "appliesTo": "partial lower detail"
    },
    {
      "label": "elevation",
      "value": "EL. 185.26",
      "unit": "",
      "appliesTo": "partial lower detail"
    },
    {
      "label": "elevation",
      "value": "EL. 185.10",
      "unit": "",
      "appliesTo": "partial lower detail"
    },
    {
      "label": "elevation",
      "value": "EL. 188.39",
      "unit": "",
      "appliesTo": "partial lower detail"
    },
    {
      "label": "elevation",
      "value": "EL. 188.45",
      "unit": "",
      "appliesTo": "partial lower detail"
    }
  ],
  "notes": [
    "BEGIN BRIDGE B.F.P.R. BENT 1 STA. 17+23.00",
    "FORM 3” DIA. X 12” DEEP HOLE FOR 1½” DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 2 BRIDGE SHEET 16",
    "SEE DETAIL 1 BRIDGE SHEET 16",
    "4-#10 OVER EACH PILE"
  ],
  "labels": [
    "℄ SR 21",
    "SR 21 WB = PGL",
    "STA. 17+26.35",
    "℄ BRG.",
    "B.F.P.R.",
    "PLAN",
    "(BENT 1 LEFT)",
    "A",
    "B",
    "GDOT",
    "P.I. NO.",
    "0019181"
  ],
  "description": "This crop primarily shows the plan of the left side of Bent 1, with the bent laid out across six beam centerlines and referenced to SR 21 and the bridge centerline. It also includes dowel-hole information, beam spacing and overall bent dimensions, plus the upper portions of partial lower pile/reinforcement details."
}

p13_r02 plan of end bent 1 cap and pile spacing left sidePlan

  • smooth dowel hole×4circularFour hole symbols are visible; callout states holes are typical for smooth dowels.

22'-0" dimension81°-20'-05.0" angle17+23.00 station17+26.35 station81°-20'-05.0" angle15'-4¾" dimension2'-9⅜" dimension2¾" dimension+24 more

Page 14

crop

p14_r01 plan of beam spacing at bent 2 left

page 14 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p14_r01_plan_of_beam_spacing_at_bent_2_left
Original
p14_r01 plan of beam spacing at bent 2 left
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown in plan at Bent 2 Left."
    },
    {
      "name": "bearing locations",
      "tag": "",
      "shape": "circular symbols",
      "material": "",
      "count": 12,
      "note": "Two rows of bearing-location symbols are shown."
    },
    {
      "name": "beam centerlines",
      "tag": "℄ BEAM 1 through ℄ BEAM 6",
      "shape": "line",
      "material": "",
      "count": 6,
      "note": "Six beam centerlines are identified below the bent cap."
    },
    {
      "name": "bent centerline",
      "tag": "℄ BENT",
      "shape": "line",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "bearing centerlines",
      "tag": "℄ BEARING",
      "shape": "line",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "smooth dowel bar holes",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Typical holes for smooth dowel bars are called out."
    }
  ],
  "measurements": [
    {
      "label": "Skew angle, typical",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Distance from SR 21 WB = PGL reference line",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Station",
      "value": "17+81.35",
      "unit": "",
      "appliesTo": "℄ BENT"
    },
    {
      "label": "Dowel-bar hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "smooth dowel bar holes"
    },
    {
      "label": "Dowel-bar hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "smooth dowel bar holes"
    },
    {
      "label": "Smooth dowel bar diameter",
      "value": "1½\"",
      "unit": "",
      "appliesTo": "smooth dowel bar holes"
    },
    {
      "label": "Left end offset",
      "value": "2'-3⅜\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Beam centerline spacing",
      "value": "7'-7¹⁄₁₆\"",
      "unit": "",
      "appliesTo": "℄ BEAM 1 through ℄ BEAM 6"
    },
    {
      "label": "Right end offset",
      "value": "2'-3⁵⁄₁₆\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "End dimension",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7½\"",
      "unit": "",
      "appliesTo": "℄ BEAM 1 through ℄ BEAM 6"
    },
    {
      "label": "Overall length",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Local horizontal dimension",
      "value": "2'-9⅜\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Vertical dimension",
      "value": "11½\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Vertical dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Vertical dimension",
      "value": "2'-1½\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Overall vertical dimension",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "bent cap"
    }
  ],
  "notes": [
    "FORM 3” DIA. X 12” DEEP HOLE FOR 1½” DIA. SMOOTH DOWEL BAR, TYP."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "STA. 17+81.35",
    "PLAN",
    "(BENT 2 LEFT)"
  ],
  "description": "This crop is a plan view for Bent 2 Left, showing a rectangular bent cap with six identified beam centerlines and two rows of bearing-location symbols. It documents the bent-cap layout, beam spacing, skew, station reference, bearing centerlines, and typical smooth-dowel-bar hole requirement."
}

p14_r01 plan of beam spacing at bent 2 leftPlan

  • smooth dowel bar holescircularTypical holes for smooth dowel bars are called out.

81°-20'-05.0" Skew angle, typical22'-0" Distance from SR 21 WB = PGL reference line17+81.35 Station3" Dowel-bar hole diameter12" Dowel-bar hole depth1½" Smooth dowel bar diameter2'-3⅜" Left end offset7'-7¹⁄₁₆" Beam centerline spacing+9 more

crop

p14_r02 plan of beam spacing at bent 2 right

page 14 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p14_r02_plan_of_beam_spacing_at_bent_2_right
Original
p14_r02 plan of beam spacing at bent 2 right
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent cap",
      "tag": "BENT 2 RIGHT",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Plan footprint shown with bearing locations."
    },
    {
      "name": "beam centerline",
      "tag": "C BEAM 7 through C BEAM 12",
      "shape": "line",
      "material": "",
      "count": 6,
      "note": "Centerlines only; the beams themselves are not drawn in this crop."
    },
    {
      "name": "bearing location",
      "tag": "C BEARING",
      "shape": "circular point symbol",
      "material": "",
      "count": 12,
      "note": "Two bearing locations are shown at each beam centerline."
    },
    {
      "name": "smooth dowel bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 12,
      "note": "Called out as formed holes, typical, at the bearing locations."
    }
  ],
  "measurements": [
    {
      "label": "horizontal dimension",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "C SR 21 / SR 21 EB = PGL"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "C SR 21 and C BENT"
    },
    {
      "label": "station",
      "value": "17+74.65",
      "unit": "",
      "appliesTo": "C BENT"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "dowel hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "smooth dowel bar hole"
    },
    {
      "label": "dowel hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "smooth dowel bar hole"
    },
    {
      "label": "smooth dowel bar diameter",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "smooth dowel bar"
    },
    {
      "label": "offset dimension",
      "value": "2'-9 3/8\"",
      "unit": "",
      "appliesTo": "C BENT / bearing layout"
    },
    {
      "label": "end offset",
      "value": "2'-3 5/16\"",
      "unit": "",
      "appliesTo": "left end of bent cap"
    },
    {
      "label": "bearing spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "bearing layout"
    },
    {
      "label": "bearing spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "bearing layout"
    },
    {
      "label": "bearing spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "bearing layout"
    },
    {
      "label": "bearing spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "bearing layout"
    },
    {
      "label": "bearing spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "bearing layout"
    },
    {
      "label": "end offset",
      "value": "2'-3 3/8\"",
      "unit": "",
      "appliesTo": "right end of bent cap"
    },
    {
      "label": "beam spacing",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "C BEAM 7 to C BEAM 8"
    },
    {
      "label": "beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "",
      "appliesTo": "beam centerlines"
    },
    {
      "label": "beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "",
      "appliesTo": "beam centerlines"
    },
    {
      "label": "beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "",
      "appliesTo": "beam centerlines"
    },
    {
      "label": "beam spacing",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "C BEAM 11 to C BEAM 12"
    },
    {
      "label": "overall bent cap length",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "vertical dimension",
      "value": "11 1/2\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "vertical dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "vertical dimension",
      "value": "2'-1 1/2\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "overall bent cap width",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "vertical dimension",
      "value": "2'-1 1/2\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "vertical dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "vertical dimension",
      "value": "11 1/2\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP."
  ],
  "labels": [
    "C SR 21",
    "SR 21 EB = PGL",
    "STA.17+74.65",
    "C BENT",
    "C BEARING",
    "PLAN",
    "(BENT 2 RIGHT)",
    "GDT",
    "P.I. NO.",
    "0019181"
  ],
  "description": "This crop is a plan view of Bent 2 Right, showing the rectangular bent-cap footprint and its relationship to the SR 21 eastbound profile grade line. It documents the centerlines for Beams 7 through 12, bearing locations, dowel-bar hole callout, skew, station, and bent-cap layout dimensions."
}

p14_r02 plan of beam spacing at bent 2 rightPlan

  • smooth dowel bar hole×12circularCalled out as formed holes, typical, at the bearing locations.

22'-0" horizontal dimension81°-20'-05.0" skew angle17+74.65 station81°-20'-05.0" skew angle3" dowel hole diameter12" dowel hole depth1 1/2" smooth dowel bar diameter2'-9 3/8" offset dimension+20 more

Page 15

crop

bent_3_right

page 15 · bent_3_right
Original
bent_3_right
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bent cap",
      "tag": "",
      "shape": "long rectangular cap",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown in both the Bent 3 Right plan and elevation."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "bearing locations shown as circular symbols on centerline",
      "material": "",
      "count": 6,
      "note": "Located at C BEAM 7 through C BEAM 12 in the plan."
    },
    {
      "name": "smooth dowel bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 6,
      "note": "Callout specifies holes for 1 1/2 inch diameter smooth dowel bars."
    },
    {
      "name": "column",
      "tag": "COLUMN 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Column is shown extending between cap and footing, with a break in its height."
    },
    {
      "name": "column",
      "tag": "COLUMN 4",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Column is shown extending between cap and footing, with a break in its height."
    },
    {
      "name": "footing",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One footing is shown below each column."
    },
    {
      "name": "H-pile",
      "tag": "HP 12 X 53",
      "shape": "H-section",
      "material": "steel",
      "count": 4,
      "note": "Four pile ends are visibly shown below the two footings in the elevation; the pile connection detail is also shown."
    },
    {
      "name": "reinforcement bar",
      "tag": "1132, 530, 1133, 531, 532, 1131, 1130",
      "shape": "bar reinforcement",
      "material": "",
      "count": null,
      "note": "Reinforcement callouts are shown at the bent cap and Column 3."
    },
    {
      "name": "pile connection reinforcement bar",
      "tag": "#8 BAR",
      "shape": "U-shaped",
      "material": "",
      "count": null,
      "note": "Shown in the PILE CONNECTION DETAIL."
    }
  ],
  "measurements": [
    {
      "label": "skew/alignment angle",
      "value": "81°-20'-05.0”",
      "unit": "",
      "appliesTo": "C SR 21 / SR 21 EB = PGL"
    },
    {
      "label": "dimension",
      "value": "22'-0”",
      "unit": "",
      "appliesTo": "C SR 21 to SR 21 EB = PGL"
    },
    {
      "label": "station",
      "value": "STA. 18+56.65",
      "unit": "",
      "appliesTo": "Bent 3 Right"
    },
    {
      "label": "overall bent-cap plan length",
      "value": "42'-6”",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "end spacing",
      "value": "2'-3 5/16”",
      "unit": "",
      "appliesTo": "bent-cap plan"
    },
    {
      "label": "beam spacing",
      "value": "7'-7 1/16”",
      "unit": "",
      "appliesTo": "bent-cap plan; repeated between beam centerlines"
    },
    {
      "label": "end spacing",
      "value": "6'-0”",
      "unit": "",
      "appliesTo": "bent-cap plan"
    },
    {
      "label": "beam spacing",
      "value": "7'-7 1/2”",
      "unit": "",
      "appliesTo": "bent-cap plan; repeated between beam centerlines"
    },
    {
      "label": "dimension",
      "value": "2'-9 3/8”",
      "unit": "",
      "appliesTo": "bent-cap plan"
    },
    {
      "label": "cap plan width segment",
      "value": "1'-2”",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap plan width segment",
      "value": "11 1/2”",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap plan width segment",
      "value": "2'-1 1/2”",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "overall cap plan width",
      "value": "4'-3”",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dowel-bar hole diameter",
      "value": "3”",
      "unit": "",
      "appliesTo": "smooth dowel bar hole"
    },
    {
      "label": "dowel-bar hole depth",
      "value": "12”",
      "unit": "",
      "appliesTo": "smooth dowel bar hole"
    },
    {
      "label": "smooth dowel bar diameter",
      "value": "1 1/2”",
      "unit": "",
      "appliesTo": "smooth dowel bar"
    },
    {
      "label": "bearing/cap minimum depth",
      "value": "4'-0”",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 186.60",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 186.04",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 186.49",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 185.94",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 186.35",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 185.79",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 186.20",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 185.65",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 186.06",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 185.51",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 185.88",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "bearing elevation",
      "value": "EL. 185.32",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "elevation",
      "value": "EL. 182.04",
      "unit": "",
      "appliesTo": "left end of bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.90",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.83",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.41",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.34",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.20",
      "unit": "",
      "appliesTo": "right end of bent cap"
    },
    {
      "label": "typical footing elevation",
      "value": "EL. 151.00",
      "unit": "",
      "appliesTo": "footings"
    },
    {
      "label": "reinforcement callout",
      "value": "8-1132",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "reinforcement callout",
      "value": "2-530",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "reinforcement callout",
      "value": "8-1133",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "reinforcement callout",
      "value": "12-531",
      "unit": "",
      "appliesTo": "Column 3"
    },
    {
      "label": "reinforcement callout",
      "value": "14-532 DBL",
      "unit": "",
      "appliesTo": "Column 3"
    },
    {
      "label": "reinforcement callout",
      "value": "12-1131 SERIES",
      "unit": "",
      "appliesTo": "Column 3"
    },
    {
      "label": "reinforcement callout",
      "value": "12-1130 SERIES",
      "unit": "",
      "appliesTo": "Column 3"
    },
    {
      "label": "reinforcement spacing",
      "value": "44-431 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "reinforcement spacing",
      "value": "25-531 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "spacing",
      "value": "11 SPS. AT 7”",
      "unit": "",
      "appliesTo": "end cap reinforcement"
    },
    {
      "label": "spacing",
      "value": "6 SPS AT 5”",
      "unit": "",
      "appliesTo": "Column 3 reinforcement"
    },
    {
      "label": "dimension",
      "value": "3 1/2”",
      "unit": "",
      "appliesTo": "bent-cap reinforcement"
    },
    {
      "label": "dimension",
      "value": "2”",
      "unit": "",
      "appliesTo": "Column 3 reinforcement"
    },
    {
      "label": "dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "Column 3 reinforcement"
    },
    {
      "label": "column/cap dimension",
      "value": "8'-9”",
      "unit": "",
      "appliesTo": "each outer cap segment"
    },
    {
      "label": "column spacing",
      "value": "25'-0”",
      "unit": "",
      "appliesTo": "C COLUMN 3 to C COLUMN 4"
    },
    {
      "label": "pile connection angle",
      "value": "5°",
      "unit": "",
      "appliesTo": "PILE CONNECTION DETAIL"
    },
    {
      "label": "pile connection angle",
      "value": "15°",
      "unit": "",
      "appliesTo": "PILE CONNECTION DETAIL"
    },
    {
      "label": "pile connection angle",
      "value": "30°",
      "unit": "",
      "appliesTo": "PILE CONNECTION DETAIL"
    },
    {
      "label": "pile connection minimum dimension",
      "value": "24”",
      "unit": "",
      "appliesTo": "PILE CONNECTION DETAIL"
    },
    {
      "label": "pile connection minimum dimension",
      "value": "5”",
      "unit": "",
      "appliesTo": "PILE CONNECTION DETAIL"
    },
    {
      "label": "pile connection hole diameter",
      "value": "2”",
      "unit": "",
      "appliesTo": "PILE CONNECTION DETAIL"
    },
    {
      "label": "pile connection dimension",
      "value": "4”",
      "unit": "",
      "appliesTo": "PILE CONNECTION DETAIL"
    },
    {
      "label": "bar extension",
      "value": "3'-9”",
      "unit": "",
      "appliesTo": "BARS 1131A into cap"
    },
    {
      "label": "maximum factored axial load",
      "value": "222",
      "unit": "KIPS",
      "appliesTo": "piles"
    },
    {
      "label": "pile designation",
      "value": "HP 12 X 53",
      "unit": "",
      "appliesTo": "all piles"
    },
    {
      "label": "driving resistance",
      "value": "342",
      "unit": "KIPS",
      "appliesTo": "all piles"
    },
    {
      "label": "minimum tip elevation",
      "value": "115",
      "unit": "",
      "appliesTo": "BENT 3L"
    },
    {
      "label": "minimum tip elevation",
      "value": "114",
      "unit": "",
      "appliesTo": "BENT 3R"
    },
    {
      "label": "drawing scale",
      "value": "1/4” = 1'-0”",
      "unit": "",
      "appliesTo": "sheet"
    }
  ],
  "notes": [
    "…E BRIDGE SHEET NO.16 FOR CAP, COLUMN AND FOOTING SECTIONS. [partial at left crop edge]",
    "…RS 432 NOT SHOWN. [partial at left crop edge]",
    "…TEND BARS 1131A 3'-9” INTO CAP. [partial at left crop edge]",
    "FORM 3” DIA. X 12” DEEP HOLE FOR 1 1/2” DIA. SMOOTH DOWEL BAR, TYP.",
    "PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 222 KIPS.",
    "ALL PILES SHALL BE STEEL H, HP 12 X 53.",
    "ALL PILES SHALL BE DRIVEN TO A DRIVING RESISTANCE OF 342 KIPS AFTER A MINIMUM TIP ELEVATION OF 115 AT BENT 3L AND 114 AT BENT 3R IS ACHIEVED."
  ],
  "labels": [
    "PLAN",
    "(BENT 3 RIGHT)",
    "ELEVATION",
    "(BENT 3 RIGHT LOOKING AHEAD)",
    "C SR 21",
    "SR 21 EB = PGL",
    "C BENT",
    "C BEARING",
    "C BEAM 7",
    "C BEAM 8",
    "C BEAM 9",
    "C BEAM 10",
    "C BEAM 11",
    "C BEAM 12",
    "A",
    "B",
    "PILE CONNECTION DETAIL",
    "NO SCALE",
    "PLAN DRIVING OBJECTIVE",
    "BRIDGE NO.1 LT. AND RT.",
    "INTERMEDIATE BENT 3",
    "SR 21 @ NS #620272Y",
    "JENKINS COUNTY",
    "DRAWING NO. 35-0015",
    "BRIDGE SHEET 15 OF 21",
    "SCALE: 1/4” = 1'-0” (UNLESS OTHERWISE NOTED)",
    "MAY 2025"
  ],
  "description": "This crop documents Intermediate Bent 3 Right, with a plan of the bent cap and an elevation looking ahead. The elevation shows the cap supported by Columns 3 and 4 on separate footings with steel H-piles, and the crop also includes a pile connection detail and pile driving notes."
}

bent_3_rightElevation

  • smooth dowel bar hole×6circularCallout specifies holes for 1 1/2 inch diameter smooth dowel bars.

81°-20'-05.0” skew/alignment angle22'-0” dimensionSTA. 18+56.65 station42'-6” overall bent-cap plan length2'-3 5/16” end spacing7'-7 1/16” beam spacing6'-0” end spacing7'-7 1/2” beam spacing+58 more

crop

p15_r01 plan of bent 3 left beam spacing

page 15 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p15_r01_plan_of_bent_3_left_beam_spacing
Original
p15_r01 plan of bent 3 left beam spacing
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Plan identified as BENT 3 LEFT; centerline of bent is shown."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "circular symbol",
      "material": "",
      "count": 12,
      "note": "Bearing centerline callout shown; two bearing rows at six beam centerlines."
    },
    {
      "name": "beam",
      "tag": "BEAM 1 through BEAM 6",
      "shape": "",
      "material": "",
      "count": 6,
      "note": "Shown by skewed beam centerlines only."
    },
    {
      "name": "dowel-bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Typical formed hole called out for smooth dowel bar."
    },
    {
      "name": "smooth dowel bar",
      "tag": "",
      "shape": "cylindrical",
      "material": "",
      "count": null,
      "note": "Specified in the typical formed-hole callout."
    }
  ],
  "measurements": [
    {
      "label": "roadway/profile alignment to bent reference",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "SR 21 WB = PGL"
    },
    {
      "label": "station",
      "value": "18+63.35",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "skew angle, typical",
      "value": "8°-20'-05.0\"",
      "unit": "",
      "appliesTo": "bearing/beam layout"
    },
    {
      "label": "dowel-bar hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "dowel-bar hole"
    },
    {
      "label": "dowel-bar hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "dowel-bar hole"
    },
    {
      "label": "smooth dowel bar diameter",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "smooth dowel bar"
    },
    {
      "label": "top edge to upper bearing row",
      "value": "11 1/2\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "upper bearing row to bent centerline",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "upper bearing row to lower bearing row",
      "value": "2'-1 1/2\"",
      "unit": "",
      "appliesTo": "bearings"
    },
    {
      "label": "bent cap width",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "lower bearing row to bent centerline",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "lower bearing row to bottom edge",
      "value": "11 1/2\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "bearing/beam offset at left end",
      "value": "2'-3 3/8\"",
      "unit": "",
      "appliesTo": "left end"
    },
    {
      "label": "beam centerline spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "BEAM 1 through BEAM 6; 5 places shown"
    },
    {
      "label": "bearing/beam offset at right end",
      "value": "2'-3 5/16\"",
      "unit": "",
      "appliesTo": "right end"
    },
    {
      "label": "end spacing",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "bent cap; both ends shown"
    },
    {
      "label": "beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "",
      "appliesTo": "BEAM 1 through BEAM 6; 4 places shown"
    },
    {
      "label": "overall bent cap length",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "local horizontal dimension",
      "value": "2'-9 3/8\"",
      "unit": "",
      "appliesTo": "near BEAM 5"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "STA. 18+63.35",
    "℄ BEARING",
    "℄ BENT",
    "℄ BEAM 1",
    "℄ BEAM 2",
    "℄ BEAM 3",
    "℄ BEAM 4",
    "℄ BEAM 5",
    "℄ BEAM 6",
    "PLAN",
    "(BENT 3 LEFT)"
  ],
  "description": "This crop is a plan view of the left bent at Bent 3. It shows a rectangular bent cap with two rows of bearing locations aligned to six skewed beam centerlines, together with cap dimensions, beam spacing, stationing, and a typical dowel-bar hole callout."
}

p15_r01 plan of bent 3 left beam spacingPlan

  • dowel-bar holecircularTypical formed hole called out for smooth dowel bar.

22'-0" roadway/profile alignment to bent reference18+63.35 station8°-20'-05.0" skew angle, typical3" dowel-bar hole diameter12" dowel-bar hole depth1 1/2" smooth dowel bar diameter11 1/2" top edge to upper bearing row1'-2" upper bearing row to bent centerline+11 more

crop

p15_r02 plan of bent 3 right beam spacing

page 15 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p15_r02_plan_of_bent_3_right_beam_spacing
Original
p15_r02 plan of bent 3 right beam spacing
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Plan view labeled ℄ BENT."
    },
    {
      "name": "beam",
      "tag": "BEAM 7–BEAM 12",
      "shape": "",
      "material": "",
      "count": 6,
      "note": "Shown by six skewed beam centerlines."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "circular location",
      "material": "",
      "count": 12,
      "note": "Bearing centerline locations are shown in two rows."
    },
    {
      "name": "formed dowel-bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 12,
      "note": "Typical 3 in. diameter, 12 in. deep holes are indicated at bearing locations."
    },
    {
      "name": "smooth dowel bar",
      "tag": "",
      "shape": "circular bar",
      "material": "",
      "count": null,
      "note": "Called out as 1 1/2 in. diameter, typical."
    }
  ],
  "measurements": [
    {
      "label": "dimension",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "distance between skewed reference lines"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "SR 21 / bent geometry"
    },
    {
      "label": "station",
      "value": "18+56.65",
      "unit": "",
      "appliesTo": "SR 21 EB = PGL"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "typical bent geometry"
    },
    {
      "label": "dowel-bar hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "formed dowel-bar hole"
    },
    {
      "label": "dowel-bar hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "formed dowel-bar hole"
    },
    {
      "label": "smooth dowel bar diameter",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "smooth dowel bar"
    },
    {
      "label": "dimension",
      "value": "2'-9 3/8\"",
      "unit": "",
      "appliesTo": "bent / bearing layout"
    },
    {
      "label": "spacing",
      "value": "2'-3 5/16\"",
      "unit": "",
      "appliesTo": "left end of bent cap to beam layout"
    },
    {
      "label": "spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "beam layout"
    },
    {
      "label": "spacing",
      "value": "2'-3 3/8\"",
      "unit": "",
      "appliesTo": "right end of bent cap to beam layout"
    },
    {
      "label": "spacing",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "beam layout"
    },
    {
      "label": "spacing",
      "value": "7'-7 1/2\"",
      "unit": "",
      "appliesTo": "beam layout"
    },
    {
      "label": "spacing",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "beam layout"
    },
    {
      "label": "overall dimension",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "bent cap / bearing layout"
    },
    {
      "label": "dimension",
      "value": "11 1/2\"",
      "unit": "",
      "appliesTo": "bent cap / bearing layout"
    },
    {
      "label": "dimension",
      "value": "2'-1 1/2\"",
      "unit": "",
      "appliesTo": "bent cap / bearing layout"
    },
    {
      "label": "overall dimension",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "bent cap / bearing layout"
    },
    {
      "label": "dimension",
      "value": "2'-1 1/2\"",
      "unit": "",
      "appliesTo": "bent cap / bearing layout"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP."
  ],
  "labels": [
    "℄ SR 21",
    "SR 21 EB = PGL",
    "STA. 18+56.65",
    "PLAN",
    "(BENT 3 RIGHT)",
    "A1",
    "B1",
    "44-431 AT EQ. SPS. (partial/unclear)"
  ],
  "description": "This crop is a plan view titled PLAN (BENT 3 RIGHT), showing a rectangular bent cap laid out skew to SR 21 EB = PGL at STA. 18+56.65. It documents the bent, bearing and beam centerline arrangement for BEAM 7 through BEAM 12, including typical formed holes for smooth dowel bars."
}

p15_r02 plan of bent 3 right beam spacingPlan

  • formed dowel-bar hole×12circularTypical 3 in. diameter, 12 in. deep holes are indicated at bearing locations.

22'-0" dimension81°-20'-05.0" skew angle18+56.65 station81°-20'-05.0" skew angle3" dowel-bar hole diameter12" dowel-bar hole depth1 1/2" smooth dowel bar diameter2'-9 3/8" dimension+13 more

Page 17

crop

p17_r01 plan of beam spacing and dowels at bent 4 left

page 17 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p17_r01_plan_of_beam_spacing_and_dowels_at_bent_4_left
Original
p17_r01 plan of beam spacing and dowels at bent 4 left
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent",
      "tag": "BENT 4 LEFT",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Plan layout of the bent is shown."
    },
    {
      "name": "Beams",
      "tag": "BEAM 1 through BEAM 6",
      "shape": "",
      "material": "",
      "count": 6,
      "note": "Shown by beam centerline locations only."
    },
    {
      "name": "Smooth dowel hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": "Hole locations are shown with center marks; note calls for smooth dowels."
    }
  ],
  "measurements": [
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0”",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Skew angle, typical",
      "value": "81°-20'-05.0”",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Dowel hole diameter",
      "value": "3”",
      "unit": "",
      "appliesTo": "Smooth dowel hole"
    },
    {
      "label": "Dowel hole depth",
      "value": "12”",
      "unit": "",
      "appliesTo": "Smooth dowel hole"
    },
    {
      "label": "Smooth dowel diameter",
      "value": "1 1/2”",
      "unit": "",
      "appliesTo": "Smooth dowel hole"
    },
    {
      "label": "Bent end dimension",
      "value": "3'-0 1/16”",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Bent end dimension",
      "value": "5'-4 3/4”",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "End spacing",
      "value": "3'-0 7/8”",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Typical beam spacing",
      "value": "7'-7 1/16”",
      "unit": "",
      "appliesTo": "BEAM 1 through BEAM 6"
    },
    {
      "label": "Beam spacing",
      "value": "6'-10 1/2”",
      "unit": "",
      "appliesTo": "BEAM 1"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7”",
      "unit": "",
      "appliesTo": "BEAM 2"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7”",
      "unit": "",
      "appliesTo": "BEAM 3"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7”",
      "unit": "",
      "appliesTo": "BEAM 4"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7”",
      "unit": "",
      "appliesTo": "BEAM 5"
    },
    {
      "label": "Beam spacing",
      "value": "6'-10 9/16”",
      "unit": "",
      "appliesTo": "BEAM 6"
    },
    {
      "label": "Overall bent length",
      "value": "44'-1 1/16”",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Offset",
      "value": "1'-6”",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Offset",
      "value": "1'-6”",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Bent width",
      "value": "3'-0”",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Typical dimension",
      "value": "2 3/4”",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Dimension",
      "value": "2'-9 3/8”",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Ahead distance",
      "value": "22'-0”",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Station",
      "value": "19+18.35",
      "unit": "",
      "appliesTo": "℄ BRG."
    }
  ],
  "notes": [
    "SEE DETAIL 3 BRIDGE SHEET 16",
    "FORM 3” DIA. X 12” DEEP HOLE FOR 1 1/2” DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 4 BRIDGE SHEET 16"
  ],
  "labels": [
    "B.F.P.R.",
    "SR 21 WB = PGL",
    "STA. 19+18.35",
    "℄ BRG.",
    "AHEAD",
    "PLAN",
    "(BENT 4 LEFT)"
  ],
  "description": "This crop shows the plan layout for Bent 4 Left, including its skewed rectangular bent footprint and beam centerline locations for Beams 1 through 6. The drawing provides the bent length, beam spacing chain, bearing centerline station, alignment information, and typical smooth-dowel hole requirements."
}

p17_r01 plan of beam spacing and dowels at bent 4 leftPlan

  • Smooth dowel hole×4circularHole locations are shown with center marks; note calls for smooth dowels.

81°-20'-05.0” Skew angle81°-20'-05.0” Skew angle, typical3” Dowel hole diameter12” Dowel hole depth1 1/2” Smooth dowel diameter3'-0 1/16” Bent end dimension5'-4 3/4” Bent end dimension3'-0 7/8” End spacing+15 more

crop

p17_r02 plan of beam spacing and dowels at bent 4 right

page 17 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p17_r02_plan_of_beam_spacing_and_dowels_at_bent_4_right
Original
p17_r02 plan of beam spacing and dowels at bent 4 right
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent",
      "tag": "BENT 4 RIGHT",
      "shape": "rectangular plan element with widened end areas",
      "material": "",
      "count": 1,
      "note": "Only the bent plan arrangement is shown."
    },
    {
      "name": "Beams",
      "tag": "℄ BEAM 7–℄ BEAM 12",
      "shape": "centerlines shown",
      "material": "",
      "count": 6,
      "note": "Beam centerlines are labeled for Beams 7 through 12."
    },
    {
      "name": "Formed dowel holes",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Callout specifies holes for smooth dowels, typical."
    },
    {
      "name": "Smooth dowels",
      "tag": "",
      "shape": "cylindrical",
      "material": "",
      "count": null,
      "note": "Specified in the formed-hole callout."
    }
  ],
  "measurements": [
    {
      "label": "Distance to ahead reference",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Station",
      "value": "19+15.00",
      "unit": "",
      "appliesTo": "BENT 4"
    },
    {
      "label": "Station",
      "value": "19+11.65",
      "unit": "",
      "appliesTo": "℄ BRG."
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 4"
    },
    {
      "label": "Skew angle, typical",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Bent end dimension",
      "value": "5'-4 3/4\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "End offset, left",
      "value": "3'-0 7/8\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Beam centerline spacing (5 occurrences)",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 7–BEAM 12"
    },
    {
      "label": "End offset, right",
      "value": "3'-0 7/8\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Distance, left",
      "value": "6'-10 1/2\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Beam spacing (4 occurrences)",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "BEAM 8–BEAM 11"
    },
    {
      "label": "Distance, right",
      "value": "6'-10 9/16\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Overall bent dimension",
      "value": "44'-1 1/16\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Typical dimension",
      "value": "2 3/4\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Horizontal dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "B.F.P.R."
    },
    {
      "label": "Vertical dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "B.F.P.R."
    },
    {
      "label": "Vertical dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "B.F.P.R."
    },
    {
      "label": "Right end vertical dimension",
      "value": "3'-0 7/16\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Formed hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "Formed dowel holes"
    },
    {
      "label": "Formed hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "Formed dowel holes"
    },
    {
      "label": "Smooth dowel diameter",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "Smooth dowels"
    }
  ],
  "notes": [
    "END BRIDGE B.F.P.R. BENT 4 STA. 19+15.00",
    "FORM 3” DIA. X 12” DEEP HOLE FOR 1 1/2” DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 4 BRIDGE SHEET 16",
    "SEE DETAIL 3 BRIDGE SHEET 16"
  ],
  "labels": [
    "SR 21",
    "AHEAD",
    "SR 21 EB = PGL",
    "STA. 19+11.65 ℄ BRG.",
    "B.F.P.R.",
    "℄ BEAM 7",
    "℄ BEAM 8",
    "℄ BEAM 9",
    "℄ BEAM 10",
    "℄ BEAM 11",
    "℄ BEAM 12",
    "PLAN",
    "(BENT 4 RIGHT)",
    "GDOT",
    "P.I. NO.",
    "0019181"
  ],
  "description": "This crop is a plan view titled \"PLAN (BENT 4 RIGHT).\" It shows the Bent 4 right arrangement relative to SR 21 EB/PGL, with centerlines identified for Beams 7 through 12 and a typical formed-hole/smooth-dowel callout."
}

p17_r02 plan of beam spacing and dowels at bent 4 rightPlan

  • Formed dowel holescircularCallout specifies holes for smooth dowels, typical.

22'-0" Distance to ahead reference19+15.00 Station19+11.65 Station81°-20'-05.0" Skew angle81°-20'-05.0" Skew angle, typical5'-4 3/4" Bent end dimension3'-0 7/8" End offset, left7'-7/16" Beam centerline spacing (5 occurrences)+13 more

crop

p17_r03 plan view of end bent 4 left beam layout

page 17 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p17_r03_plan_view_of_end_bent_4_left_beam_layout
Original
p17_r03 plan view of end bent 4 left beam layout
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent cap",
      "tag": "BENT 4 LEFT",
      "shape": "long rectangular",
      "material": "",
      "count": 1,
      "note": "Plan shows the cap at six beam centerline locations."
    },
    {
      "name": "formed dowel hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": "Callout indicates smooth dowels; typical."
    },
    {
      "name": "bridge beam",
      "tag": "BEAM 1–BEAM 6",
      "shape": "",
      "material": "",
      "count": 6,
      "note": "Shown by centerline references only."
    }
  ],
  "measurements": [
    {
      "label": "Dowel hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "formed dowel hole"
    },
    {
      "label": "Dowel hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "formed dowel hole"
    },
    {
      "label": "Smooth dowel diameter",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "formed dowel hole"
    },
    {
      "label": "Angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Distance ahead",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Cap half-width",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Cap half-width",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Cap width",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Typical dimension",
      "value": "2 3/4\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Dimension",
      "value": "2'-9 3/8\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Left end dimension",
      "value": "3'-0 7/8\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Beam centerline spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "BEAM 1–BEAM 6"
    },
    {
      "label": "Beam centerline spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "BEAM 1–BEAM 6"
    },
    {
      "label": "Beam centerline spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "BEAM 1–BEAM 6"
    },
    {
      "label": "Beam centerline spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "BEAM 1–BEAM 6"
    },
    {
      "label": "Beam centerline spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "BEAM 1–BEAM 6"
    },
    {
      "label": "Right end dimension",
      "value": "3'-0 7/8\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Left overall segment",
      "value": "6'-10 1/2\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "BEAM 1–BEAM 6"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "BEAM 1–BEAM 6"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "BEAM 1–BEAM 6"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "BEAM 1–BEAM 6"
    },
    {
      "label": "Right overall segment",
      "value": "6'-10 9/16\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Overall length",
      "value": "44'-1 1/16\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Left end width dimension",
      "value": "3'-0 7/16\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Right end width dimension",
      "value": "5'-4 3/4\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 3 BRIDGE SHEET 16",
    "SEE DETAIL 4 BRIDGE SHEET 16"
  ],
  "labels": [
    "B.F.P.R.",
    "SR 21 WB = PGL",
    "STA. 19+18.35",
    "℄ BRG.",
    "℄ BEAM 1",
    "℄ BEAM 2",
    "℄ BEAM 3",
    "℄ BEAM 4",
    "℄ BEAM 5",
    "℄ BEAM 6",
    "AHEAD",
    "PLAN"
  ],
  "description": "This crop is a plan view titled PLAN (BENT 4 LEFT), showing a long rectangular bent cap aligned at an angle to SR 21 WB = PGL. Six beam centerlines are referenced along the cap, with four typical formed holes for smooth dowels and detail references at both ends."
}

p17_r03 plan view of end bent 4 left beam layoutPlan

  • formed dowel hole×4circularCallout indicates smooth dowels; typical.

3" Dowel hole diameter12" Dowel hole depth1 1/2" Smooth dowel diameter81°-20'-05.0" Angle81°-20'-05.0" Angle22'-0" Distance ahead1'-6" Cap half-width1'-6" Cap half-width+19 more