Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Chamfer

1 page · 3 crops · other

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a chamfer detail class.

Every dimension read for it3

  • 3/4"CHAMFERp5 · p05_r03
  • 3/4”Chamferp5 · p05_r03 details of 1 expansion joint in barrier
  • 3/4"chamferp5 · p05_r04

Notes on the sheets that carry it

  • p53/4" CHAMFER
  • p51" PREFORMED JOINT FILLER
  • p5LOW MODULUS SILICONE SEALANT (TYPE A)
  • p5HOLD IN PLACE WITH 10d GALV. NAILS.
  • p5BARS ARE DETAILED IN BAR DETAILS AS EQUIVALENT FULL LENGTH BARS.
  • p5* SEE SUBSECTION 511.3.05.G.5 OF THE GEORGIA DOT SPECIFICATION FOR PLACEMENT OF 500B BAR.
  • p5LOW MODULUS SIL[partial] SEALANT (TYPE A[partial]

Every crop it was read in — the drawing beside what the model took off it

Page 5

crop

p05_r03

page 5 · barrier_expansion_joint_p05_r03
Original
p05_r03
{
  "view": "Detail",
  "objects": [
    {
      "name": "barrier",
      "tag": "",
      "shape": "rectangular in plan and elevation; tapered in side elevation",
      "material": "",
      "count": null,
      "note": "Barrier expansion-joint detail shown in plan, elevation, and side elevation."
    },
    {
      "name": "expansion joint",
      "tag": "",
      "shape": "vertical linear joint",
      "material": "",
      "count": null,
      "note": "Shown between barrier sections."
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "rectangular vertical strip",
      "material": "preformed joint filler",
      "count": null,
      "note": "Shown within the 1-inch expansion joint."
    },
    {
      "name": "silicone sealant",
      "tag": "TYPE A",
      "shape": "narrow linear seal at joint base",
      "material": "low modulus silicone",
      "count": null,
      "note": ""
    },
    {
      "name": "chamfer",
      "tag": "",
      "shape": "beveled edge",
      "material": "",
      "count": null,
      "note": ""
    },
    {
      "name": "galvanized nails",
      "tag": "",
      "shape": "",
      "material": "galvanized",
      "count": null,
      "note": "Specified to hold joint filler in place."
    }
  ],
  "measurements": [
    {
      "label": "CHAMFER",
      "value": "3/4\"",
      "unit": "",
      "appliesTo": "chamfer"
    },
    {
      "label": "joint dimension",
      "value": "3/4\"",
      "unit": "",
      "appliesTo": "expansion joint"
    },
    {
      "label": "PREFORMED JOINT FILLER",
      "value": "1\"",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "GALV. NAILS",
      "value": "10d",
      "unit": "",
      "appliesTo": "galvanized nails"
    },
    {
      "label": "side elevation dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "barrier"
    }
  ],
  "notes": [
    "3/4\" CHAMFER",
    "1\" PREFORMED JOINT FILLER",
    "LOW MODULUS SILICONE SEALANT (TYPE A)",
    "HOLD IN PLACE WITH 10d GALV. NAILS."
  ],
  "labels": [
    "PLAN",
    "ELEVATION",
    "SIDE ELEVATION",
    "DETAILS OF 1\" EXPANSION JOINT IN BARRIER",
    "NO SCALE",
    "GDOT",
    "P.I. NO.",
    "0019181"
  ],
  "description": "This crop is a no-scale detail of a 1-inch expansion joint in a barrier. It includes plan, elevation, and side-elevation representations showing preformed joint filler, low modulus silicone sealant, chamfering, and galvanized nail retention."
}

p05_r03Detail

  • chamferbeveled edge

3/4" CHAMFER3/4" joint dimension1" PREFORMED JOINT FILLER10d GALV. NAILS3" side elevation dimension

crop

p05_r03 details of 1 expansion joint in barrier

page 5 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p05_r03_details_of_1_expansion_joint_in_barrier
Original
p05_r03 details of 1 expansion joint in barrier
{
  "view": "Detail",
  "objects": [
    {
      "name": "Barrier",
      "tag": "",
      "shape": "tapered",
      "material": "",
      "count": null,
      "note": "Shown in side elevation only; expansion joint occurs at barrier base/through barrier."
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "vertical joint",
      "material": "",
      "count": null,
      "note": "Detail title identifies a 1” expansion joint in barrier."
    },
    {
      "name": "Preformed joint filler",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": null,
      "note": "Shown hatched in plan and elevation."
    },
    {
      "name": "Low modulus silicone sealant (Type A)",
      "tag": "",
      "shape": "linear joint sealant",
      "material": "silicone",
      "count": null,
      "note": "Shown at the joint."
    },
    {
      "name": "Chamfer",
      "tag": "",
      "shape": "chamfered edge",
      "material": "",
      "count": null,
      "note": "Shown in plan."
    },
    {
      "name": "Galvanized nails",
      "tag": "",
      "shape": "",
      "material": "galvanized steel",
      "count": null,
      "note": "Specified to hold the filler in place; nail size is 10d."
    }
  ],
  "measurements": [
    {
      "label": "Chamfer",
      "value": "3/4”",
      "unit": "",
      "appliesTo": "Chamfer"
    },
    {
      "label": "Dimension",
      "value": "3/4”",
      "unit": "",
      "appliesTo": "Expansion joint detail, plan"
    },
    {
      "label": "Preformed joint filler thickness",
      "value": "1”",
      "unit": "",
      "appliesTo": "Preformed joint filler"
    },
    {
      "label": "Dimension",
      "value": "3/4”",
      "unit": "",
      "appliesTo": "Expansion joint detail, elevation"
    },
    {
      "label": "Barrier/base dimension",
      "value": "3”",
      "unit": "",
      "appliesTo": "Barrier side elevation"
    },
    {
      "label": "Expansion joint size",
      "value": "1”",
      "unit": "",
      "appliesTo": "Expansion joint"
    }
  ],
  "notes": [
    "3/4” CHAMFER",
    "1” PREFORMED JOINT FILLER",
    "LOW MODULUS SILICONE SEALANT (TYPE A)",
    "HOLD IN PLACE WITH 10d GALV. NAILS."
  ],
  "labels": [
    "PLAN",
    "ELEVATION",
    "SIDE ELEVATION",
    "DETAILS OF 1” EXPANSION JOINT IN BARRIER",
    "NO SCALE",
    "P.I. NO.",
    "0019181"
  ],
  "description": "This crop shows details of a 1” expansion joint in a barrier, with plan, elevation, and side-elevation views. The detail identifies preformed joint filler, Type A low modulus silicone sealant, 3/4” chamfers, and galvanized nails for holding the filler in place."
}

p05_r03 details of 1 expansion joint in barrierDetail

  • Chamferchamfered edgeShown in plan.

3/4” Chamfer3/4” Dimension1” Preformed joint filler thickness3/4” Dimension3” Barrier/base dimension1” Expansion joint size

crop

p05_r04

page 5 · slab_reinforcement_at_skewed_joint_p05_r04
Original
p05_r04
{
  "view": "Detail",
  "objects": [
    {
      "name": "main slab reinforcement bars",
      "tag": "*500B",
      "shape": "bent bars",
      "material": "steel reinforcement",
      "count": 5,
      "note": "Bars shown terminating/bending at skewed joint."
    },
    {
      "name": "construction joint",
      "tag": "B.F.P.R. OR CONST. JOINT",
      "shape": "skewed diagonal joint line",
      "material": "",
      "count": 1,
      "note": "Shown through main slab reinforcement detail."
    },
    {
      "name": "chamfer",
      "tag": "",
      "shape": "chamfered edge",
      "material": "",
      "count": null,
      "note": "Callout is partially cropped."
    },
    {
      "name": "low modulus sealant",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Callout text is partially cropped."
    }
  ],
  "measurements": [
    {
      "label": "clearance",
      "value": "2\"",
      "unit": "",
      "appliesTo": "main slab reinforcement bars"
    },
    {
      "label": "chamfer",
      "value": "3/4\"",
      "unit": "",
      "appliesTo": "chamfer"
    }
  ],
  "notes": [
    "BARS ARE DETAILED IN BAR DETAILS AS EQUIVALENT FULL LENGTH BARS.",
    "* SEE SUBSECTION 511.3.05.G.5 OF THE GEORGIA DOT SPECIFICATION FOR PLACEMENT OF 500B BAR.",
    "LOW MODULUS SIL[partial] SEALANT (TYPE A[partial]"
  ],
  "labels": [
    "MAIN SLAB REINF.",
    "B.F.P.R. OR CONST. JOINT",
    "AT B.F.P.R. OR CONST. JOINT",
    "⊥ ℄ BRIDGE",
    "BAR BENDING DETAILS AT SKEWED JOINTS",
    "NO SCALE"
  ],
  "description": "This crop shows a bar-bending detail for main slab reinforcement at a skewed B.F.P.R. or construction joint. Five bent reinforcement bars are depicted adjacent to the diagonal joint, with a 2 inch clear dimension and notes referring to equivalent full-length bar detailing and placement of the 500B bar."
}

p05_r04Detail

  • chamferchamfered edgeCallout is partially cropped.

2" clearance3/4" chamfer