Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Beveled Shim Plate

1 page · 15 crops · ×10 · superstructure

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a shim plate component class.

How the sheets named it

Beveled shim platesbeveled shim platesshim plateBENT 1BENT 4

Every dimension read for it22

  • L+2”Overall plate lengthp12 · p12_r07
  • (L+2”)/2Half plate lengthp12 · p12_r07
  • (L+2”)/2Half plate lengthp12 · p12_r07
  • W+2”Overall plate widthp12 · p12_r07
  • (W+2”)/2Half plate widthp12 · p12_r07
  • (W+2”)/2Half plate widthp12 · p12_r07
  • T₁thickness at left endp12 · p12_r16
  • T₂thickness at right endp12 · p12_r16
  • 1”shim plate thicknessp12 · p12_r01 plan of endwall and bearing assembly bent 1
  • 5/8”shim plate thicknessp12 · p12_r02 section through beam showing bearing pad shim plate and dowel
  • 1″shim plate thicknessp12 · p12_r03 skewed plan of bearing pad and endwall alignment
  • L+2"overall lengthp12 · p12_r07 plan view of beveled shim plate footprint with hole and dimensions
  • (L+2")/2half lengthp12 · p12_r07 plan view of beveled shim plate footprint with hole and dimensions
  • (L+2")/2half lengthp12 · p12_r07 plan view of beveled shim plate footprint with hole and dimensions
  • W+2"overall widthp12 · p12_r07 plan view of beveled shim plate footprint with hole and dimensions
  • (W+2")/2half widthp12 · p12_r07 plan view of beveled shim plate footprint with hole and dimensions
  • (W+2")/2half widthp12 · p12_r07 plan view of beveled shim plate footprint with hole and dimensions
  • 1/2"beveled shim plate thicknessp12 · p12_r07 plan view of beveled shim plate footprint with hole and dimensions
  • T₁T₁p12 · p12_r12 beveled shim plate
  • T₂T₂p12 · p12_r12 beveled shim plate
  • T₁left-end thicknessp12 · p12_r16 beveled shim plate
  • T₂right-end thicknessp12 · p12_r16 beveled shim plate

Notes on the sheets that carry it

  • p12BEARING PAD =
  • p12BEVELED SHIM PLATE
  • p12BEARING
  • p12BEAM
  • p12B.F.P.P.R. ENDWALL
  • p121. BEARING PADS HAVE BEEN DESIGNED ACCORDING TO AASHTO LRFD BRIDGE DESIGN SPECIFICATIONS, SECTION 14.7.6 METHOD A AND SHALL BE FURNISHED IN ACCORDANCE WITH AASHTO LRFD BRIDGE CONSTRUCTION SPECIFICATIONS, SECTION 18, BEARING DEVICES.
  • p122. 1 1/2” DIAMETER SMOOTH DOWELS SHALL BE ASTM A709 GRADE 50.
  • p123. BEARING PADS SHALL BE MADE OF 60 DUROMETER HARDNESS NEOPRENE, GRADE 2 OR HIGHER.
  • p124. 3” DIAMETER HOLE IN BEARING PADS MAY BE FORMED OR DRILLED.
  • p125. BEARING PADS SHALL HAVE 1/4” COVER ON THE TOP, BOTTOM, AND SIDES AND AROUND THE HOLE.
  • p126. 3/16” LOAD PLATES AND 12 GAGE INTERNAL PLATE(S) (IF REQUIRED) SHALL BE ASTM A709 GRADE 36 OR ASTM A1011 GRADE 36.
  • p127. NUMBER OF INTERNAL PLATES SHOWN FOR ILLUSTRATION PURPOSES ONLY. THE NUMBER OF INTERNAL PLATE(S) SPECIFIED SHALL BE EQUALLY SPACED BETWEEN LOAD PLATES.
  • p128. USE OF 1 1/2° MOLD DRAFT IS OPTIONAL.
  • p129. BEVELED SHIM PLATES SHALL BE ASTM A709 GRADE 36 AND SHALL BE GALVANIZED IN ACCORDANCE WITH ASTM A123.
  • p12℄ BEARING PAD = ℄ BEVELED SHIM PLATE
  • p12B.F.P.R. → ENDWALL
  • p12PREFORMED FOAM JOINT FILLER SHALL BE IN ACCORDANCE WITH SUB-SECTION 833.2.10 OF THE GEORGIA DOT SPECIFICATIONS.
  • p12ENDWALL NOT SHOWN
  • p12PREFORMED FOAM JOINT FILLER SHALL BE IN ACCORDANCE WITH SUB-SECTION 833.2.10 GEORGIA DOT SPECIFICATIONS.
  • p12BEVELED SHIM PLATE = 3” DIAMETER HOLE
  • p12BENT 1 SHOWN
  • p12BENT 4 SIMILAR
  • p122. 1/2” DIAMETER SMOOTH DOWELS SHALL BE ASTM A709 GRADE 50.
  • p12PRE-FORMED FOAM JOINT FILLER SHALL BE [partial]
  • p12IN ACCORDANCE WITH SUB-SECTION 833.2.[partial]
  • p12GEORGIA DOT SPECIFICATIONS.
  • p121/2" BEVELED SHIM PLATE =
  • p123" DIAMETER HOLE

Every crop it was read in — the drawing beside what the model took off it

Page 12

crop

p12_r03

page 12 · bearing_endwall_assembly_p12_r03
Original
p12_r03
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent",
      "tag": "BENT 1",
      "shape": "partial plan view",
      "material": "",
      "count": 1,
      "note": "BENT 1 SHOWN; BENT 4 noted as similar."
    },
    {
      "name": "Endwall",
      "tag": "B.F.P.P.R.",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Hatched endwall shown at the beam end."
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Callout identifies bearing."
    },
    {
      "name": "Bearing pad",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Callout identifies bearing pad."
    },
    {
      "name": "Beveled shim plate",
      "tag": "",
      "shape": "beveled",
      "material": "",
      "count": 1,
      "note": "Callout identifies beveled shim plate."
    },
    {
      "name": "Beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Beam is identified by callout."
    }
  ],
  "measurements": [
    {
      "label": "",
      "value": "1″",
      "unit": "",
      "appliesTo": "Bearing pad / beveled shim plate"
    }
  ],
  "notes": [
    "BEARING PAD =",
    "BEVELED SHIM PLATE",
    "BEARING",
    "BEAM",
    "B.F.P.P.R. ENDWALL"
  ],
  "labels": [
    "A",
    "PLAN",
    "BENT 1 SHOWN",
    "BENT 4 SIMILAR"
  ],
  "description": "This crop is a plan view of the bearing endwall area for Bent 1. It shows an endwall, beam, bearing, bearing pad, and beveled shim plate arrangement; Bent 4 is indicated as similar."
}

p12_r03Plan

  • Beveled shim plate×1beveledCallout identifies beveled shim plate.

1″

crop

p12_r04

page 12 · bearing_pad_design_notes_p12_r04
Original
p12_r04
{
  "view": "Notes",
  "objects": [
    {
      "name": "Bearing pads",
      "tag": "",
      "shape": "",
      "material": "60 durometer hardness neoprene, Grade 2 or higher",
      "count": null,
      "note": "Designed per AASHTO LRFD Bridge Design Specifications, Section 14.7.6 Method A."
    },
    {
      "name": "Smooth dowels",
      "tag": "",
      "shape": "circular",
      "material": "ASTM A709 Grade 50",
      "count": null,
      "note": ""
    },
    {
      "name": "Holes in bearing pads",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "May be formed or drilled."
    },
    {
      "name": "Load plates",
      "tag": "",
      "shape": "",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": ""
    },
    {
      "name": "Internal plates",
      "tag": "",
      "shape": "",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": "Number shown is for illustration purposes only; specified plates shall be equally spaced between load plates."
    },
    {
      "name": "Beveled shim plates",
      "tag": "",
      "shape": "beveled",
      "material": "ASTM A709 Grade 36",
      "count": null,
      "note": "Shall be galvanized in accordance with ASTM A123."
    }
  ],
  "measurements": [
    {
      "label": "Smooth dowel diameter",
      "value": "1 1/2”",
      "unit": "",
      "appliesTo": "Smooth dowels"
    },
    {
      "label": "Bearing pad hardness",
      "value": "60",
      "unit": "durometer",
      "appliesTo": "Bearing pads"
    },
    {
      "label": "Hole diameter",
      "value": "3”",
      "unit": "",
      "appliesTo": "Holes in bearing pads"
    },
    {
      "label": "Bearing pad cover",
      "value": "1/4”",
      "unit": "",
      "appliesTo": "Bearing pads"
    },
    {
      "label": "Load plate thickness",
      "value": "3/16”",
      "unit": "",
      "appliesTo": "Load plates"
    },
    {
      "label": "Internal plate gage",
      "value": "12",
      "unit": "GAGE",
      "appliesTo": "Internal plates"
    },
    {
      "label": "Mold draft",
      "value": "1 1/2°",
      "unit": "",
      "appliesTo": "Bearing pads"
    }
  ],
  "notes": [
    "1. BEARING PADS HAVE BEEN DESIGNED ACCORDING TO AASHTO LRFD BRIDGE DESIGN SPECIFICATIONS, SECTION 14.7.6 METHOD A AND SHALL BE FURNISHED IN ACCORDANCE WITH AASHTO LRFD BRIDGE CONSTRUCTION SPECIFICATIONS, SECTION 18, BEARING DEVICES.",
    "2. 1 1/2” DIAMETER SMOOTH DOWELS SHALL BE ASTM A709 GRADE 50.",
    "3. BEARING PADS SHALL BE MADE OF 60 DUROMETER HARDNESS NEOPRENE, GRADE 2 OR HIGHER.",
    "4. 3” DIAMETER HOLE IN BEARING PADS MAY BE FORMED OR DRILLED.",
    "5. BEARING PADS SHALL HAVE 1/4” COVER ON THE TOP, BOTTOM, AND SIDES AND AROUND THE HOLE.",
    "6. 3/16” LOAD PLATES AND 12 GAGE INTERNAL PLATE(S) (IF REQUIRED) SHALL BE ASTM A709 GRADE 36 OR ASTM A1011 GRADE 36.",
    "7. NUMBER OF INTERNAL PLATES SHOWN FOR ILLUSTRATION PURPOSES ONLY. THE NUMBER OF INTERNAL PLATE(S) SPECIFIED SHALL BE EQUALLY SPACED BETWEEN LOAD PLATES.",
    "8. USE OF 1 1/2° MOLD DRAFT IS OPTIONAL.",
    "9. BEVELED SHIM PLATES SHALL BE ASTM A709 GRADE 36 AND SHALL BE GALVANIZED IN ACCORDANCE WITH ASTM A123."
  ],
  "labels": [
    "NOTES"
  ],
  "description": "This crop is a notes block for bridge bearing pads and associated dowels, plates, and shim plates. It documents bearing-pad design criteria, material requirements, dimensions, fabrication provisions, and applicable AASHTO/ASTM specifications."
}

p12_r04Notes

  • Beveled shim platesbeveledASTM A709 Grade 36Shall be galvanized in accordance with ASTM A123.

1 1/2” Smooth dowel diameter60 durometer Bearing pad hardness3” Hole diameter1/4” Bearing pad cover3/16” Load plate thickness12 GAGE Internal plate gage1 1/2° Mold draft

crop

bent_1

page 12 · bent_1
Original
bent_1
{
  "view": "Plan",
  "objects": [
    {
      "name": "bearing pad",
      "tag": "",
      "shape": "rectangular, hatched",
      "material": "",
      "count": 1,
      "note": "Shown at the end of the upper beam."
    },
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Called out at the bearing pad."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Bearing location is called out; individual bearing geometry is not fully shown."
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "Three parallel beam outlines are visible."
    },
    {
      "name": "endwall",
      "tag": "",
      "shape": "diagonal/angled",
      "material": "",
      "count": 1,
      "note": "Called out at the left end of the beams."
    }
  ],
  "measurements": [
    {
      "label": "vertical dimension at upper beam/bearing area",
      "value": "1″",
      "unit": "",
      "appliesTo": "beam / bearing pad area"
    }
  ],
  "notes": [
    "℄ BEARING PAD = ℄ BEVELED SHIM PLATE",
    "℄ BEARING",
    "℄ BEAM",
    "B.F.P.R. → ENDWALL"
  ],
  "labels": [
    "A",
    "A",
    "PLAN",
    "BENT 1 SHOWN",
    "BENT 4 SIMILAR"
  ],
  "description": "This crop is a plan view of the beam-end and bearing arrangement at Bent 1, with Bent 4 noted as similar. It shows three parallel beams adjacent to an angled endwall, with a bearing pad and beveled shim plate called out at the upper beam end."
}

bent_1Plan

  • beveled shim plate×1rectangularCalled out at the bearing pad.

1″ vertical dimension at upper beam/bearing area

crop

p12_r02

page 12 · beveled_shim_plate_and_bearing_pad_at_beam_p12_r02
Original
p12_r02
{
  "view": "Section",
  "objects": [
    {
      "name": "Beam",
      "tag": "℄ BEAM",
      "shape": "tapered",
      "material": "",
      "count": 1,
      "note": "Partial beam end shown at bearing."
    },
    {
      "name": "Beveled shim plate",
      "tag": "",
      "shape": "beveled plate",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Smooth dowel",
      "tag": "",
      "shape": "circular rod",
      "material": "",
      "count": 1,
      "note": "Vertical dowel shown through bearing assembly."
    },
    {
      "name": "Preformed foam joint filler",
      "tag": "",
      "shape": "rectangular hatched symbol",
      "material": "foam",
      "count": 1,
      "note": "Shown as a note symbol."
    }
  ],
  "measurements": [
    {
      "label": "Shim/bearing assembly vertical dimension",
      "value": "5/8\"",
      "unit": "",
      "appliesTo": "Beveled shim plate / bearing pad"
    },
    {
      "label": "Bearing pad vertical dimension",
      "value": "1\"",
      "unit": "",
      "appliesTo": "Bearing pad"
    },
    {
      "label": "Dowel vertical dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "Smooth dowel"
    },
    {
      "label": "Dowel diameter",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "Smooth dowel"
    }
  ],
  "notes": [
    "PREFORMED FOAM JOINT FILLER SHALL BE IN ACCORDANCE WITH SUB-SECTION 833.2.10 OF THE GEORGIA DOT SPECIFICATIONS.",
    "ENDWALL NOT SHOWN"
  ],
  "labels": [
    "SECTION A-A"
  ],
  "description": "This crop shows Section A-A through a beam bearing assembly. A tapered beam end bears on a beveled shim plate and bearing pad, with a 1 1/2-inch diameter smooth dowel extending below; the endwall is explicitly noted as not shown."
}

p12_r02Section

  • Beveled shim plate×1beveled plate

5/8" Shim/bearing assembly vertical dimension1" Bearing pad vertical dimension1'-0" Dowel vertical dimension1 1/2" Dowel diameter

crop

p12_r07

page 12 · beveled_shim_plate_p12_r07
Original
p12_r07
{
  "view": "Section",
  "objects": [
    {
      "name": "Beveled shim plate",
      "tag": "",
      "shape": "rectangular plate with central circular hole",
      "material": "",
      "count": 1,
      "note": "Shown centered on horizontal and vertical centerlines."
    },
    {
      "name": "Hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Located at the plate center."
    },
    {
      "name": "Preformed foam joint filler",
      "tag": "",
      "shape": "rectangular hatched symbol",
      "material": "preformed foam",
      "count": 1,
      "note": "Shown as a hatched symbol beside the specification note."
    }
  ],
  "measurements": [
    {
      "label": "Overall plate length",
      "value": "L+2”",
      "unit": "",
      "appliesTo": "Beveled shim plate"
    },
    {
      "label": "Half plate length",
      "value": "(L+2”)/2",
      "unit": "",
      "appliesTo": "Beveled shim plate"
    },
    {
      "label": "Half plate length",
      "value": "(L+2”)/2",
      "unit": "",
      "appliesTo": "Beveled shim plate"
    },
    {
      "label": "Overall plate width",
      "value": "W+2”",
      "unit": "",
      "appliesTo": "Beveled shim plate"
    },
    {
      "label": "Half plate width",
      "value": "(W+2”)/2",
      "unit": "",
      "appliesTo": "Beveled shim plate"
    },
    {
      "label": "Half plate width",
      "value": "(W+2”)/2",
      "unit": "",
      "appliesTo": "Beveled shim plate"
    },
    {
      "label": "Hole diameter",
      "value": "3”",
      "unit": "",
      "appliesTo": "Hole"
    }
  ],
  "notes": [
    "PREFORMED FOAM JOINT FILLER SHALL BE IN ACCORDANCE WITH SUB-SECTION 833.2.10 GEORGIA DOT SPECIFICATIONS.",
    "ENDWALL NOT SHOWN",
    "BEVELED SHIM PLATE = 3” DIAMETER HOLE"
  ],
  "labels": [
    "SECTION A-A",
    "B"
  ],
  "description": "This crop shows SECTION A-A of a rectangular beveled shim plate, with a centrally located circular 3-inch-diameter hole. The plate plan dimensions are expressed as L+2 inches by W+2 inches, with centerline half-dimensions shown; the endwall is noted as not shown."
}

p12_r07Section

  • Beveled shim plate×1rectangular plate with central circular holeShown centered on horizontal and vertical centerlines.

L+2” Overall plate length(L+2”)/2 Half plate length(L+2”)/2 Half plate lengthW+2” Overall plate width(W+2”)/2 Half plate width(W+2”)/2 Half plate width3” Hole diameter

crop

p12_r12

page 12 · beveled_shim_plate_p12_r12
Original
p12_r12
{
  "view": "Section",
  "objects": [
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "tapered rectangular plate",
      "material": "",
      "count": 1,
      "note": "Plate is shown with a beveled/sloping top face and two internal vertical division lines."
    }
  ],
  "measurements": [
    {
      "label": "T₁",
      "value": "T₁",
      "unit": "",
      "appliesTo": "beveled shim plate thickness at left end"
    },
    {
      "label": "T₂",
      "value": "T₂",
      "unit": "",
      "appliesTo": "beveled shim plate thickness at right end"
    }
  ],
  "notes": [],
  "labels": [
    "AHEAD",
    "SECTION B-B",
    "BEVELED SHIM PLATE"
  ],
  "description": "This crop shows Section B-B of a beveled shim plate. The plate is drawn in section with a sloping upper face in the AHEAD direction and thicknesses identified as T₁ at the left end and T₂ at the right end."
}

p12_r12Section

  • beveled shim plate×1tapered rectangular platePlate is shown with a beveled/sloping top face and two internal vertical division lines.

T₁ T₁T₂ T₂

crop

p12_r16

page 12 · beveled_shim_plate_p12_r16
Original
p12_r16
{
  "view": "Elevation",
  "objects": [
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "tapered rectangular plate",
      "material": "",
      "count": 1,
      "note": "Shown with two internal division lines; thickness is indicated at each end."
    }
  ],
  "measurements": [
    {
      "label": "thickness at left end",
      "value": "T₁",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "thickness at right end",
      "value": "T₂",
      "unit": "",
      "appliesTo": "beveled shim plate"
    }
  ],
  "notes": [],
  "labels": [
    "BEVELED SHIM PLATE",
    "aruna sastry",
    "5/28/2025",
    "4:47:40 PM"
  ],
  "description": "This crop shows an elevation/detail of a single beveled shim plate. The plate is drawn with a tapered top face and thickness callouts T₁ at the left end and T₂ at the right end."
}

p12_r16Elevation

  • beveled shim plate×1tapered rectangular plateShown with two internal division lines; thickness is indicated at each end.

T₁ thickness at left endT₂ thickness at right end

crop

p12_r01 plan of endwall and bearing assembly bent 1

page 12 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p12_r01_plan_of_endwall_and_bearing_assembly_bent_1
Original
p12_r01 plan of endwall and bearing assembly bent 1
{
  "view": "Plan",
  "objects": [
    {
      "name": "bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": "Called out with beveled shim plate."
    },
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "rectangular, beveled",
      "material": "",
      "count": null,
      "note": "Shown at bearing pad."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": ""
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "Three parallel beam outlines are visible."
    },
    {
      "name": "endwall",
      "tag": "",
      "shape": "sloping linear",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "shim plate thickness",
      "value": "1”",
      "unit": "",
      "appliesTo": "beveled shim plate"
    }
  ],
  "notes": [
    "BENT 1 SHOWN",
    "BENT 4 SIMILAR"
  ],
  "labels": [
    "B.F.P.R.",
    "ENDWALL",
    "PLAN",
    "A",
    "BEARING PAD =",
    "BEVELED SHIM PLATE",
    "BEARING",
    "BEAM"
  ],
  "description": "This crop shows a plan view of Bent 1, with Bent 4 noted as similar. It documents the beam ends at an endwall, including bearing pads, beveled shim plates, bearings, and Section A-A reference arrows."
}

p12_r01 plan of endwall and bearing assembly bent 1Plan

  • beveled shim platerectangular, beveledShown at bearing pad.

1” shim plate thickness

crop

p12_r02 section through beam showing bearing pad shim plate and dowel

page 12 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p12_r02_section_through_beam_showing_bearing_pad_shim_plate_and_dowel
Original
p12_r02 section through beam showing bearing pad shim plate and dowel
{
  "view": "Section",
  "objects": [
    {
      "name": "beam",
      "tag": "C BEAM",
      "shape": "I-girder / beam section",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "beveled plate",
      "material": "",
      "count": 1,
      "note": "Located between beam and bearing pad."
    },
    {
      "name": "bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "smooth dowel",
      "tag": "",
      "shape": "circular rod",
      "material": "",
      "count": 1,
      "note": "Vertical dowel shown at beam centerline."
    },
    {
      "name": "preformed foam joint filler",
      "tag": "",
      "shape": "rectangular",
      "material": "preformed foam",
      "count": null,
      "note": "Shown by a hatched symbol; placement is not shown in this crop."
    }
  ],
  "measurements": [
    {
      "label": "shim plate thickness",
      "value": "5/8”",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "bearing pad thickness",
      "value": "1”",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "dowel length",
      "value": "1'-0”",
      "unit": "",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "dowel diameter",
      "value": "1 1/2”",
      "unit": "",
      "appliesTo": "smooth dowel"
    }
  ],
  "notes": [
    "PREFORMED FOAM JOINT FILLER SHALL BE IN ACCORDANCE WITH SUB-SECTION 833.2.10 OF THE GEORGIA DOT SPECIFICATIONS."
  ],
  "labels": [
    "ENDWALL NOT SHOWN",
    "SECTION A-A"
  ],
  "description": "This crop is Section A-A through the bearing arrangement below a C BEAM. It shows a beveled shim plate and bearing pad over the support, with a vertical smooth dowel; the endwall is specifically noted as not shown."
}

p12_r02 section through beam showing bearing pad shim plate and dowelSection

  • beveled shim plate×1beveled plateLocated between beam and bearing pad.

5/8” shim plate thickness1” bearing pad thickness1'-0” dowel length1 1/2” dowel diameter

crop

p12_r03 skewed plan of bearing pad and endwall alignment

page 12 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p12_r03_skewed_plan_of_bearing_pad_and_endwall_alignment
Original
p12_r03 skewed plan of bearing pad and endwall alignment
{
  "view": "Plan",
  "objects": [
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "Three parallel beam outlines are shown."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Identified by a centerline callout."
    },
    {
      "name": "bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": "Centerline is noted as equal to the beveled shim plate centerline."
    },
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": "Shown by dashed outlines at the beam end."
    },
    {
      "name": "endwall",
      "tag": "",
      "shape": "skewed linear wall",
      "material": "",
      "count": 1,
      "note": "Labeled ENDWALL."
    }
  ],
  "measurements": [
    {
      "label": "shim plate thickness",
      "value": "1″",
      "unit": "",
      "appliesTo": "beveled shim plate"
    }
  ],
  "notes": [
    "℄ BEARING PAD = ℄ BEVELED SHIM PLATE"
  ],
  "labels": [
    "B.F.P.R.",
    "A-A",
    "PLAN",
    "BENT 1 SHOWN",
    "BENT 4 SIMILAR"
  ],
  "description": "This crop is a plan view of the beam-end and endwall arrangement for Bent 1. It shows three parallel beams, bearing/shim-pad centerline information, and a skewed endwall; Bent 4 is stated to be similar."
}

p12_r03 skewed plan of bearing pad and endwall alignmentPlan

  • beveled shim platerectangularShown by dashed outlines at the beam end.

1″ shim plate thickness

crop

p12_r04 notes of bearing pad design notes

page 12 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p12_r04_notes_of_bearing_pad_design_notes
Original
p12_r04 notes of bearing pad design notes
{
  "view": "Notes",
  "objects": [
    {
      "name": "bearing pads",
      "tag": "",
      "shape": "",
      "material": "60 durometer hardness neoprene, Grade 2 or higher",
      "count": null,
      "note": "Designed and furnished to AASHTO LRFD bridge specifications."
    },
    {
      "name": "smooth dowels",
      "tag": "",
      "shape": "circular",
      "material": "ASTM A709 Grade 50",
      "count": null,
      "note": ""
    },
    {
      "name": "load plates",
      "tag": "",
      "shape": "plate",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": ""
    },
    {
      "name": "internal plates",
      "tag": "",
      "shape": "plate",
      "material": "ASTM A709 Grade 36 or ASTM A1011 Grade 36",
      "count": null,
      "note": "Required internal plates are to be equally spaced between load plates."
    },
    {
      "name": "beveled shim plates",
      "tag": "",
      "shape": "beveled plate",
      "material": "ASTM A709 Grade 36",
      "count": null,
      "note": "To be galvanized in accordance with ASTM A123."
    }
  ],
  "measurements": [
    {
      "label": "smooth dowel diameter",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "smooth dowels"
    },
    {
      "label": "bearing pad hardness",
      "value": "60",
      "unit": "durometer",
      "appliesTo": "bearing pads"
    },
    {
      "label": "hole diameter",
      "value": "3”",
      "unit": "",
      "appliesTo": "bearing pads"
    },
    {
      "label": "cover",
      "value": "1/4”",
      "unit": "",
      "appliesTo": "bearing pads"
    },
    {
      "label": "load plate thickness",
      "value": "3/16”",
      "unit": "",
      "appliesTo": "load plates"
    },
    {
      "label": "internal plate gage",
      "value": "12",
      "unit": "GAGE",
      "appliesTo": "internal plates"
    },
    {
      "label": "mold draft",
      "value": "1 1/2°",
      "unit": "",
      "appliesTo": "bearing pads"
    }
  ],
  "notes": [
    "1. BEARING PADS HAVE BEEN DESIGNED ACCORDING TO AASHTO LRFD BRIDGE DESIGN SPECIFICATIONS, SECTION 14.7.6 METHOD A AND SHALL BE FURNISHED IN ACCORDANCE WITH AASHTO LRFD BRIDGE CONSTRUCTION SPECIFICATIONS, SECTION 18, BEARING DEVICES.",
    "2. 1/2” DIAMETER SMOOTH DOWELS SHALL BE ASTM A709 GRADE 50.",
    "3. BEARING PADS SHALL BE MADE OF 60 DUROMETER HARDNESS NEOPRENE, GRADE 2 OR HIGHER.",
    "4. 3” DIAMETER HOLE IN BEARING PADS MAY BE FORMED OR DRILLED.",
    "5. BEARING PADS SHALL HAVE 1/4” COVER ON THE TOP, BOTTOM, AND SIDES AND AROUND THE HOLE.",
    "6. 3/16” LOAD PLATES AND 12 GAGE INTERNAL PLATE(S) (IF REQUIRED) SHALL BE ASTM A709 GRADE 36 OR ASTM A1011 GRADE 36.",
    "7. NUMBER OF INTERNAL PLATES SHOWN FOR ILLUSTRATION PURPOSES ONLY. THE NUMBER OF INTERNAL PLATE(S) SPECIFIED SHALL BE EQUALLY SPACED BETWEEN LOAD PLATES.",
    "8. USE OF 1 1/2° MOLD DRAFT IS OPTIONAL.",
    "9. BEVELED SHIM PLATES SHALL BE ASTM A709 GRADE 36 AND SHALL BE GALVANIZED IN ACCORDANCE WITH ASTM A123."
  ],
  "labels": [
    "NOTES"
  ],
  "description": "This crop is a notes block for bridge bearing pads and associated bearing components. It specifies materials, dimensions, fabrication provisions, internal and load plates, dowels, and shim plate galvanizing requirements."
}

p12_r04 notes of bearing pad design notesNotes

  • beveled shim platesbeveled plateASTM A709 Grade 36To be galvanized in accordance with ASTM A123.

1/2” smooth dowel diameter60 durometer bearing pad hardness3” hole diameter1/4” cover3/16” load plate thickness12 GAGE internal plate gage1 1/2° mold draft

crop

p12_r07 plan view of beveled shim plate footprint with hole and dimensions

page 12 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p12_r07_plan_view_of_beveled_shim_plate_footprint_with_hole_and_dimensions
Original
p12_r07 plan view of beveled shim plate footprint with hole and dimensions
{
  "view": "Section",
  "objects": [
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown with a centered circular hole."
    },
    {
      "name": "hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Called out as a 3\" diameter hole."
    }
  ],
  "measurements": [
    {
      "label": "overall length",
      "value": "L+2\"",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "half length",
      "value": "(L+2\")/2",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "half length",
      "value": "(L+2\")/2",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "overall width",
      "value": "W+2\"",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "half width",
      "value": "(W+2\")/2",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "half width",
      "value": "(W+2\")/2",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "beveled shim plate thickness",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "hole"
    }
  ],
  "notes": [
    "PRE-FORMED FOAM JOINT FILLER SHALL BE [partial]",
    "IN ACCORDANCE WITH SUB-SECTION 833.2.[partial]",
    "GEORGIA DOT SPECIFICATIONS.",
    "1/2\" BEVELED SHIM PLATE =",
    "3\" DIAMETER HOLE"
  ],
  "labels": [
    "ENDWALL NOT SHOWN",
    "SECTION A-A",
    "B"
  ],
  "description": "This crop shows Section A-A, labeled with endwall not shown. It documents a rectangular beveled shim plate with centered centerlines and a circular 3-inch-diameter hole, dimensioned in terms of L and W."
}

p12_r07 plan view of beveled shim plate footprint with hole and dimensionsSection

  • beveled shim plate×1rectangularShown with a centered circular hole.

L+2" overall length(L+2")/2 half length(L+2")/2 half lengthW+2" overall width(W+2")/2 half width(W+2")/2 half width1/2" beveled shim plate thickness3" hole diameter

crop

p12_r10 schedule of bearing pad dimensions and design loads by bent

page 12 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p12_r10_schedule_of_bearing_pad_dimensions_and_design_loads_by_bent
Original
p12_r10 schedule of bearing pad dimensions and design loads by bent
{
  "view": "Schedule",
  "objects": [
    {
      "name": "bearing pad",
      "tag": "BENT 1",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Schedule row lists pad dimensions, internal plates, shear deflection, and design loads."
    },
    {
      "name": "beveled shim plates",
      "tag": "BENT 1",
      "shape": "beveled",
      "material": "",
      "count": null,
      "note": "T1 and T2 thicknesses are listed."
    },
    {
      "name": "bearing pad",
      "tag": "BENT 2 BACK",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Schedule row lists pad dimensions, internal plates, shear deflection, and design loads."
    },
    {
      "name": "bearing pad",
      "tag": "BENT 2 AHEAD",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Schedule row lists pad dimensions, internal plates, shear deflection, and design loads."
    },
    {
      "name": "bearing pad",
      "tag": "BENT 3 BACK",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Schedule row lists pad dimensions, internal plates, shear deflection, and design loads."
    },
    {
      "name": "bearing pad",
      "tag": "BENT 3 AHEAD",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Schedule row lists pad dimensions, internal plates, shear deflection, and design loads."
    },
    {
      "name": "bearing pad",
      "tag": "BENT 4",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Schedule row lists pad dimensions, internal plates, shear deflection, and design loads."
    },
    {
      "name": "beveled shim plates",
      "tag": "BENT 4",
      "shape": "beveled",
      "material": "",
      "count": null,
      "note": "T1 and T2 thicknesses are listed."
    }
  ],
  "measurements": [
    {
      "label": "W",
      "value": "16”",
      "unit": "",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "L",
      "value": "12”",
      "unit": "",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "T",
      "value": "4”",
      "unit": "",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "3",
      "unit": "",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "3/8”",
      "unit": "",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "55",
      "unit": "KIPS",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "63",
      "unit": "KIPS",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "118",
      "unit": "KIPS",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "T1",
      "value": "1/4”",
      "unit": "",
      "appliesTo": "BENT 1 beveled shim plates"
    },
    {
      "label": "T2",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "BENT 1 beveled shim plates"
    },
    {
      "label": "W",
      "value": "16”",
      "unit": "",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "L",
      "value": "12”",
      "unit": "",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "T",
      "value": "4”",
      "unit": "",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "3",
      "unit": "",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "0",
      "unit": "",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "47",
      "unit": "KIPS",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "61",
      "unit": "KIPS",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "108",
      "unit": "KIPS",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "W",
      "value": "18”",
      "unit": "",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "L",
      "value": "10”",
      "unit": "",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "T",
      "value": "1 3/4”",
      "unit": "",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "1",
      "unit": "",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "0",
      "unit": "",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "79",
      "unit": "KIPS",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "71",
      "unit": "KIPS",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "150",
      "unit": "KIPS",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "W",
      "value": "18”",
      "unit": "",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "L",
      "value": "10”",
      "unit": "",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "T",
      "value": "1 3/4”",
      "unit": "",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "1",
      "unit": "",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "79",
      "unit": "KIPS",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "71",
      "unit": "KIPS",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "150",
      "unit": "KIPS",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "W",
      "value": "16”",
      "unit": "",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "L",
      "value": "12”",
      "unit": "",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "T",
      "value": "4”",
      "unit": "",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "3",
      "unit": "",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "47",
      "unit": "KIPS",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "61",
      "unit": "KIPS",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "108",
      "unit": "KIPS",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "W",
      "value": "16”",
      "unit": "",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "L",
      "value": "12”",
      "unit": "",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "T",
      "value": "4”",
      "unit": "",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "3",
      "unit": "",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "7/8”",
      "unit": "",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "55",
      "unit": "KIPS",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "63",
      "unit": "KIPS",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "118",
      "unit": "KIPS",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "T1",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "BENT 4 beveled shim plates"
    },
    {
      "label": "T2",
      "value": "1/4”",
      "unit": "",
      "appliesTo": "BENT 4 beveled shim plates"
    }
  ],
  "notes": [],
  "labels": [
    "BENT",
    "W",
    "L",
    "T",
    "NUMBER OF INTERNAL PLATE(S)",
    "DESIGN SHEAR DEFLECTION",
    "DESIGN LOADS (KIPS)",
    "DEAD LOAD",
    "LIVE LOAD (NO IMPACT)",
    "DEAD LOAD + LIVE LOAD",
    "T1",
    "T2"
  ],
  "description": "This crop is a bearing-pad schedule for Bents 1 through 4, including separate BACK and AHEAD rows at Bents 2 and 3. It documents bearing-pad dimensions, internal plate quantities, design shear deflections, design loads, and beveled shim plate thicknesses where provided."
}

p12_r10 schedule of bearing pad dimensions and design loads by bentSchedule

  • bearing padBENT 1Schedule row lists pad dimensions, internal plates, shear deflection, and design loads.
  • beveled shim platesBENT 1beveledT1 and T2 thicknesses are listed.
  • bearing padBENT 4Schedule row lists pad dimensions, internal plates, shear deflection, and design loads.
  • beveled shim platesBENT 4beveledT1 and T2 thicknesses are listed.

16” W12” L4” T3 NUMBER OF INTERNAL PLATE(S)3/8” DESIGN SHEAR DEFLECTION55 KIPS DEAD LOAD63 KIPS LIVE LOAD (NO IMPACT)118 KIPS DEAD LOAD + LIVE LOAD+44 more

crop

p12_r12 beveled shim plate

page 12 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p12_r12_beveled_shim_plate
Original
p12_r12 beveled shim plate
{
  "view": "Section",
  "objects": [
    {
      "name": "shim plate",
      "tag": "",
      "shape": "beveled rectangular plate",
      "material": "",
      "count": 1,
      "note": "Shown with varying thickness from T₁ to T₂ in the AHEAD direction."
    }
  ],
  "measurements": [
    {
      "label": "T₁",
      "value": "T₁",
      "unit": "",
      "appliesTo": "shim plate"
    },
    {
      "label": "T₂",
      "value": "T₂",
      "unit": "",
      "appliesTo": "shim plate"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B",
    "AHEAD"
  ],
  "description": "This crop shows Section B-B of a beveled shim plate. The plate is drawn in longitudinal section with a sloping top surface in the direction marked AHEAD and end thicknesses identified as T₁ and T₂."
}

p12_r12 beveled shim plateSection

  • shim plate×1beveled rectangular plateShown with varying thickness from T₁ to T₂ in the AHEAD direction.

T₁ T₁T₂ T₂

crop

p12_r16 beveled shim plate

page 12 · gdot_plan_ab5a9057847f41e3bb9d0ead3c6f2c22_p12_r16_beveled_shim_plate
Original
p12_r16 beveled shim plate
{
  "view": "Detail",
  "objects": [
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "rectangular tapered plate",
      "material": "",
      "count": 1,
      "note": "Shown with a beveled top face and two internal transverse lines."
    }
  ],
  "measurements": [
    {
      "label": "left-end thickness",
      "value": "T₁",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "right-end thickness",
      "value": "T₂",
      "unit": "",
      "appliesTo": "beveled shim plate"
    }
  ],
  "notes": [],
  "labels": [
    "BEVELED SHIM PLATE",
    "aruna sastry",
    "5/28/2025",
    "4:47:40 PM"
  ],
  "description": "This crop shows a small detail of one beveled shim plate, with thickness dimensions identified as T₁ at the left end and T₂ at the right end. A partial sheet border/title-block strip is visible along the bottom."
}

p12_r16 beveled shim plateDetail

  • beveled shim plate×1rectangular tapered plateShown with a beveled top face and two internal transverse lines.

T₁ left-end thicknessT₂ right-end thickness