Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Wingwall

3 pages · 6 crops · ×12 · substructure

Matched toWing Wallbridge.substructure.abutment_system.wing_wallon “Wingwall”

0 of 5 required measurements have a number

The model provider refused the call: the account is out of credit. Top up the OpenRouter key, or lower OPENAI_MAX_TOKENS.

The class asks forUnitA reading with that nameFrom
LengthLm/mmno reading by that name
Wall ThicknessT_wallm/mmno reading by that name
HeightHm/mmno reading by that name
Instance CountNcountno reading by that name
Concrete Gradefck—no reading by that name

Paired on the measurement’s name only, which cannot know that three span lengths sum to the deck length. Step 3 works these out properly for every item it matches — reading every crop behind the item, deriving what the drawings imply and showing its arithmetic. This item has not had that pass yet; the button runs it for this one.

How the sheets named it

wingwall/wallWingwall/Retaining WallWingwall/wallWingwall / retaining wallWall (retaining/wingwall)WALL 1WALL 2

Every dimension read for it3

  • 1'-9 1/2" ft-inBearing offsetnot attributedp1 · p01_r01 plan
  • STA. 17+29.07Stationnot attributedp1 · p01_r01 plan
  • STA. 17+29.07Stationnot attributedp1 · p01_r01

Notes on the sheets that carry it

  • p1ALL BENTS ARE F... RAILWAY COMPANY... (text cut off, partial)
  • p1END BENT PILES ... (text cut off, partial)
  • p1STATIONS ARE AL... AND B.F.P.R. OR ... ELEVATIONS ARE ... PROFILE GRADE LI... PROFILE GRADE LI... (text cut off, partial)
  • p1MEASURED ALONG... (text cut off, partial)
  • p1LEFT BRIDGE: MINIMUM REQUIRED... EXISTING TRACK V... FUTURE TRACK VE... RIGHT BRIDGE: MINIMUM REQUIRED... EXISTING TRACK V... FUTURE TRACK VE... (text cut off, partial)
  • p1MINIMUM REQUIRED... (text cut off, partial)
  • p1TEMPORARY SHORING AS NECESSARY, TYP.
  • p1TO BE REMOVED
  • p1APPROXIMATE EXISTING GROUNDLINE
  • p1FUTURE GROUNDLINE
  • p1TO US 25/SR 121
  • p1TO GA HIGHWAY 23
  • p1TO PERKINS
  • p1TO MILLEN
  • p1AHEAD
  • p1BEGIN BRIDGE
  • p1END BRIDGE
  • p1RR R/W
  • p1FRONT FACE OF WALL 1
  • p1FRONT FACE OF WALL 2
  • p1PGL WESTBOUND
  • p1PGL EASTBOUND
  • p1RRMP D-0080.54
  • p1CHAIN LINK WIRE FENCE, TYP.
  • p1EXP.
  • p1FIX
  • p132" MIN. CL.
  • p132" CL. 3 SIDES
  • p131'-0" TYP.
  • p13B.F.P.R.
  • p136'-0" MIN.
  • p132'-0" MIN.
  • p172-445 SERIES
  • p172-442
  • p174-1040
  • p17441
  • p17CAP
  • p17COPING
  • p17FRONT FACE OF WALL

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

p01_r01 plan

page 1 · gdot_plan_649084f395824aaebf1f5ed48132696f_p01_r01_plan
Original
p01_r01 plan
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent",
      "tag": "BENT 1 (B.F.P.R. BENT 1L/1R)",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "end bent, front face of wall 1, expansion/fixed bearings noted"
    },
    {
      "name": "bent",
      "tag": "BENT 2 (BENT 2L/2R)",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "interior bent, fixed bearings"
    },
    {
      "name": "bent",
      "tag": "BENT 3 (BENT 3L/3R)",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "interior bent, expansion bearings"
    },
    {
      "name": "bent",
      "tag": "BENT 4 (B.F.P.R. BENT 4L/4R)",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "end bent, front face of wall 2, expansion bearings"
    },
    {
      "name": "wingwall/wall",
      "tag": "WALL 1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "front face of wall 1, appears at both ends of left/right bridge"
    },
    {
      "name": "wingwall/wall",
      "tag": "WALL 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "front face of wall 2"
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 8,
      "note": "marked EXP. and FIX at bent locations in elevation view"
    },
    {
      "name": "pile bent support",
      "tag": "",
      "shape": "pile group/footing",
      "material": "reinforced concrete",
      "count": 2,
      "note": "shown schematically under bents 2 and 3 in elevation"
    },
    {
      "name": "chain link wire fence",
      "tag": "",
      "shape": "linear",
      "material": "chain link/metal",
      "count": 3,
      "note": "typical, shown at deck level in elevation"
    },
    {
      "name": "deck/superstructure",
      "tag": "LEFT BRIDGE / RIGHT BRIDGE",
      "shape": "rectangular/trapezoidal in plan",
      "material": "reinforced concrete",
      "count": 2,
      "note": "twin parallel bridge structures (left and right) crossing railroad"
    },
    {
      "name": "railroad track",
      "tag": "CENTRAL OF GEORGIA RAILROAD COMPANY EXISTING TRACK",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "future track",
      "tag": "FUTURE TRACK",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "future access road",
      "tag": "FUTURE ACCESS ROAD",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "temporary shoring",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "as necessary, typical, near end bridge"
    }
  ],
  "measurements": [
    {
      "label": "Total length of bridge",
      "value": "192'-0\"",
      "unit": "ft-in",
      "appliesTo": "bridge overall"
    },
    {
      "label": "Span 1 length",
      "value": "55'-0\"",
      "unit": "ft-in",
      "appliesTo": "Bent 1 to Bent 2"
    },
    {
      "label": "Span 2 length",
      "value": "82'-0\"",
      "unit": "ft-in",
      "appliesTo": "Bent 2 to Bent 3"
    },
    {
      "label": "Span 3 length",
      "value": "55'-0\"",
      "unit": "ft-in",
      "appliesTo": "Bent 3 to Bent 4"
    },
    {
      "label": "Out to out width",
      "value": "43'-7\"",
      "unit": "ft-in",
      "appliesTo": "bridge deck"
    },
    {
      "label": "Gutter to gutter width",
      "value": "40'-0\"",
      "unit": "ft-in",
      "appliesTo": "bridge deck"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "deg-min-sec",
      "appliesTo": "typical bent skew"
    },
    {
      "label": "Bearing offset",
      "value": "1'-9 1/2\"",
      "unit": "ft-in",
      "appliesTo": ""
    },
    {
      "label": "Dimension",
      "value": "6'-0\"",
      "unit": "ft-in",
      "appliesTo": "multiple locations near point of min vert clearance"
    },
    {
      "label": "Dimension",
      "value": "34'-0\"",
      "unit": "ft-in",
      "appliesTo": "Bent 3L/3R area"
    },
    {
      "label": "Dimension",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "near end bridge station"
    },
    {
      "label": "Elevation",
      "value": "EL. 151.00",
      "unit": "ft",
      "appliesTo": "typical elevation reference at bents 2 and 3"
    },
    {
      "label": "Station",
      "value": "STA. 17+23.00",
      "unit": "",
      "appliesTo": "Begin Bridge"
    },
    {
      "label": "Station",
      "value": "STA. 17+29.07",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Station",
      "value": "STA. 18+16.85",
      "unit": "",
      "appliesTo": "CL SR 21"
    },
    {
      "label": "Station",
      "value": "STA. 303+80.83",
      "unit": "",
      "appliesTo": "CL Central of Georgia Railroad Company"
    },
    {
      "label": "Station",
      "value": "STA. 19+08.93",
      "unit": "",
      "appliesTo": "CL SR 21 / PT#3"
    },
    {
      "label": "Station",
      "value": "STA. 19+15.00",
      "unit": "",
      "appliesTo": "End Bridge"
    },
    {
      "label": "Bearing/angle",
      "value": "N 2°-23'-16.7\" E",
      "unit": "deg-min-sec",
      "appliesTo": "future track alignment"
    },
    {
      "label": "Bearing/angle",
      "value": "N 83°-43'-21.7\" E",
      "unit": "deg-min-sec",
      "appliesTo": "SR 21 alignment"
    },
    {
      "label": "Distance",
      "value": "75'-10 5/16\"",
      "unit": "ft-in",
      "appliesTo": "future track clearance dimension"
    },
    {
      "label": "Distance",
      "value": "74'-7 5/16\"",
      "unit": "ft-in",
      "appliesTo": "existing track clearance dimension"
    },
    {
      "label": "Minimum clearance",
      "value": "12'-1\"",
      "unit": "ft-in",
      "appliesTo": "CL Central of Georgia Railroad existing track, min"
    },
    {
      "label": "Minimum clearance",
      "value": "14'-1\"",
      "unit": "ft-in",
      "appliesTo": "right bridge, min"
    },
    {
      "label": "Minimum horizontal clearance",
      "value": "36'-4\"",
      "unit": "ft-in",
      "appliesTo": "calculated to face of column, left bridge"
    },
    {
      "label": "Minimum horizontal clearance",
      "value": "25'-8\"",
      "unit": "ft-in",
      "appliesTo": "calculated to face of column, right bridge"
    },
    {
      "label": "Dimension",
      "value": "15'-0\"",
      "unit": "ft-in",
      "appliesTo": "twice, near min horiz clearance callouts"
    },
    {
      "label": "RRMP designation",
      "value": "D-0080.54",
      "unit": "",
      "appliesTo": "railroad milepost marker"
    }
  ],
  "notes": [
    "ALL BENTS ARE F... RAILWAY COMPANY... (text cut off, partial)",
    "END BENT PILES ... (text cut off, partial)",
    "STATIONS ARE AL... AND B.F.P.R. OR ... ELEVATIONS ARE ... PROFILE GRADE LI... PROFILE GRADE LI... (text cut off, partial)",
    "MEASURED ALONG... (text cut off, partial)",
    "LEFT BRIDGE: MINIMUM REQUIRED... EXISTING TRACK V... FUTURE TRACK VE... RIGHT BRIDGE: MINIMUM REQUIRED... EXISTING TRACK V... FUTURE TRACK VE... (text cut off, partial)",
    "MINIMUM REQUIRED... (text cut off, partial)",
    "TEMPORARY SHORING AS NECESSARY, TYP.",
    "TO BE REMOVED",
    "APPROXIMATE EXISTING GROUNDLINE",
    "FUTURE GROUNDLINE"
  ],
  "labels": [
    "PLAN",
    "ELEVATION",
    "FRONT FACE OF WALL 1",
    "FRONT FACE OF WALL 2",
    "FRONT FACE OF WALL NO. 1",
    "FRONT FACE OF WALL NO. 2",
    "PGL WESTBOUND",
    "PGL EASTBOUND",
    "PGL",
    "CL BENT 2L",
    "CL BENT 3L",
    "CL BENT 2R",
    "CL BENT 3R",
    "B.F.P.R. BENT 1L",
    "B.F.P.R. BENT 4L",
    "B.F.P.R. BENT 1R",
    "B.F.P.R. BENT 4R",
    "B.F.P.R. BENT 1",
    "B.F.P.R. BENT 4",
    "BENT 2",
    "BENT 3",
    "BEGIN BRIDGE",
    "END BRIDGE",
    "CL CENTRAL OF GEORGIA RAILROAD COMPANY EXISTING TRACK",
    "CL FUTURE ACCESS ROAD",
    "CL FUTURE TRACK",
    "CL EXISTING TRACK",
    "CL SR 21",
    "TO US 25/SR 121",
    "TO GA HIGHWAY 23",
    "TO PERKINS",
    "TO MILLEN",
    "RR R/W",
    "PT #3",
    "AHEAD",
    "N.",
    "LOCATION",
    "LEFT BRI...",
    "RIGHT BRI...",
    "NOTES:",
    "CHAIN LINK WIRE FENCE, TYP.",
    "POINT OF MIN. VERT. CLEARANCE",
    "FUTURE POINT OF MIN. VERT. CLEARANCE",
    "GUTTER TO GUTTER",
    "OUT TO OUT",
    "MIN. HORIZ. CL. CALCULATED TO FACE OF COLUMN",
    "EXP.",
    "FIX",
    "EL. 151.00, TYP."
  ],
  "description": "This crop shows a combined Plan and Elevation of a twin (left and right parallel) roadway bridge structure crossing an existing and future railroad track alignment plus a future access road, at the intersection with SR 21. The plan view details bent locations (Bents 1-4, each split into L/R for the two parallel bridges), skew angles, wall/wingwall faces, minimum vertical and horizontal clearances to the tracks, and various stationing/bearing callouts; the elevation view below shows the four bents with bearing types (EXP/FIX), span lengths (55'-82'-55' totaling 192'-0\"), chain link fencing, and existing/future groundline references. A partially visible notes/table block at bottom right lists general notes and a location table for left/right bridge clearances, but this text is cut off in the crop."
}

p01_r01 planPlan

  • wingwall/wallWALL 1×2rectangularreinforced concretefront face of wall 1, appears at both ends of left/right bridge
  • wingwall/wallWALL 2×2rectangularreinforced concretefront face of wall 2

192'-0" ft-in Total length of bridge55'-0" ft-in Span 1 length82'-0" ft-in Span 2 length55'-0" ft-in Span 3 length43'-7" ft-in Out to out width40'-0" ft-in Gutter to gutter width81°-20'-05.0" deg-min-sec Skew angle1'-9 1/2" ft-in Bearing offset+20 more

crop

p01_r01

page 1 · other_p01_r01
Original
p01_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent",
      "tag": "1 (B.F.P.R. BENT 1)",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Also shown as BENT 1L/1R centerline reference in plan; expansion bearing per elevation"
    },
    {
      "name": "Bent",
      "tag": "2 (BENT 2L/2R)",
      "shape": "tapered/skewed",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Fixed bearing per elevation; pile bent shown in elevation with visible pile group"
    },
    {
      "name": "Bent",
      "tag": "3 (BENT 3L/3R)",
      "shape": "tapered/skewed",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Fixed/expansion bearings shown in elevation"
    },
    {
      "name": "Bent",
      "tag": "4 (B.F.P.R. BENT 4)",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Expansion bearing per elevation"
    },
    {
      "name": "Wingwall/Retaining Wall",
      "tag": "WALL 1",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Front face of Wall 1 shown at both bridges (left and right)"
    },
    {
      "name": "Wingwall/Retaining Wall",
      "tag": "WALL 2",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Front face of Wall 2 shown at both bridges"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Shown schematically under Bent 2 and Bent 3 in elevation view"
    },
    {
      "name": "Bearing",
      "tag": "EXP",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Expansion bearings at Bent 1, Bent 3, Bent 4 (multiple locations) per elevation"
    },
    {
      "name": "Bearing",
      "tag": "FIX",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Fixed bearings at Bent 2 per elevation"
    },
    {
      "name": "Chain link wire fence",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Typical, shown atop deck in elevation at two locations"
    },
    {
      "name": "Temporary shoring",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Called out as necessary, typical, near end bridge station"
    },
    {
      "name": "Deck/Superstructure",
      "tag": "",
      "shape": "rectangular in plan",
      "material": "",
      "count": 1,
      "note": "Shown in plan with gutter-to-gutter and out-to-out dimensions; PGL Eastbound/Westbound labeled"
    }
  ],
  "measurements": [
    {
      "label": "MIN clearance to existing track",
      "value": "12'-1\"",
      "unit": "",
      "appliesTo": "Central of Georgia Railroad existing track"
    },
    {
      "label": "Distance",
      "value": "74'-7 5/16\"",
      "unit": "",
      "appliesTo": "Point of Min. Vert. Clearance"
    },
    {
      "label": "Distance",
      "value": "75'-10 5/16\"",
      "unit": "",
      "appliesTo": "Future Point of Min. Vert. Clearance"
    },
    {
      "label": "Bearing angle",
      "value": "N 2°-23'-16.7\" E",
      "unit": "",
      "appliesTo": "Future Access Road alignment"
    },
    {
      "label": "Offset",
      "value": "1'-9 1/2\"",
      "unit": "",
      "appliesTo": "Point of Min. Vert. Clearance offsets (multiple)"
    },
    {
      "label": "Offset",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "Point/Future Point of Min. Vert. Clearance offsets (multiple)"
    },
    {
      "label": "Gutter to gutter width",
      "value": "40'-0\"",
      "unit": "",
      "appliesTo": "Bridge deck (Bent 2L/2R area)"
    },
    {
      "label": "Out to out width",
      "value": "43'-7\"",
      "unit": "",
      "appliesTo": "Bridge deck"
    },
    {
      "label": "Distance",
      "value": "34'-0\"",
      "unit": "",
      "appliesTo": "Bent 3L/3R region"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "Bent skew, typical, multiple bents"
    },
    {
      "label": "Station",
      "value": "STA. 18+16.85",
      "unit": "",
      "appliesTo": "Ç SR 21"
    },
    {
      "label": "Station",
      "value": "STA. 303+80.83",
      "unit": "",
      "appliesTo": "Ç Central of Georgia Railroad Company"
    },
    {
      "label": "Station",
      "value": "STA. 17+23.00",
      "unit": "",
      "appliesTo": "Begin Bridge"
    },
    {
      "label": "Station",
      "value": "STA. 17+29.07",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Station",
      "value": "STA. 19+08.93",
      "unit": "",
      "appliesTo": "PT#3"
    },
    {
      "label": "Station",
      "value": "STA. 19+15.00",
      "unit": "",
      "appliesTo": "End Bridge"
    },
    {
      "label": "Bearing angle",
      "value": "N 83°-43'-21.7\" E",
      "unit": "",
      "appliesTo": "Ç SR 21"
    },
    {
      "label": "Distance",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "unlabeled dimension near Bent 3 area"
    },
    {
      "label": "Distance",
      "value": "15'-0\"",
      "unit": "",
      "appliesTo": "unlabeled dimension (two instances) near Min Horiz Cl callout"
    },
    {
      "label": "Min. Horiz. Cl.",
      "value": "25'-8\"",
      "unit": "",
      "appliesTo": "calculated to face of column"
    },
    {
      "label": "Min. Horiz. Cl.",
      "value": "36'-4\"",
      "unit": "",
      "appliesTo": "calculated to face of column"
    },
    {
      "label": "MIN clearance",
      "value": "14'-1\"",
      "unit": "",
      "appliesTo": "unlabeled feature near Wall 2"
    },
    {
      "label": "Total length of bridge",
      "value": "192'-0\"",
      "unit": "",
      "appliesTo": "Bridge overall"
    },
    {
      "label": "Span length",
      "value": "55'-0\"",
      "unit": "",
      "appliesTo": "End spans (Bent1-2 and Bent3-4)"
    },
    {
      "label": "Span length",
      "value": "82'-0\"",
      "unit": "",
      "appliesTo": "Middle span (Bent2-3)"
    },
    {
      "label": "Elevation",
      "value": "151.00",
      "unit": "",
      "appliesTo": "Typical elevation callout near bent piles"
    }
  ],
  "notes": [
    "TO US 25/SR 121",
    "TO GA HIGHWAY 23",
    "TO PERKINS",
    "TO MILLEN",
    "AHEAD",
    "BEGIN BRIDGE",
    "END BRIDGE",
    "TEMPORARY SHORING AS NECESSARY, TYP.",
    "TO BE REMOVED",
    "RR R/W",
    "FRONT FACE OF WALL 1",
    "FRONT FACE OF WALL 2",
    "PGL WESTBOUND",
    "PGL EASTBOUND",
    "RRMP D-0080.54",
    "CHAIN LINK WIRE FENCE, TYP.",
    "FUTURE GROUNDLINE",
    "APPROXIMATE EXISTING GROUNDLINE",
    "EXP.",
    "FIX"
  ],
  "labels": [
    "PLAN",
    "ELEVATION",
    "Ç FUTURE ACCESS ROAD",
    "Ç FUTURE TRACK",
    "Ç CENTRAL OF GEORGIA RAILROAD COMPANY EXISTING TRACK",
    "Ç EXISTING TRACK",
    "Ç SR 21",
    "Ç BENT 2L",
    "Ç BENT 3L",
    "Ç BENT 2R",
    "Ç BENT 3R",
    "B.F.P.R. BENT 1L",
    "B.F.P.R. BENT 1R",
    "B.F.P.R. BENT 4L",
    "B.F.P.R. BENT 4R",
    "BENT 2",
    "BENT 3",
    "B.F.P.R. BENT 1",
    "B.F.P.R. BENT 4",
    "N."
  ],
  "description": "This crop presents a combined Plan and partial Elevation of a twin bridge structure (Left Bridge and Right Bridge) crossing a railroad and future access road at a skewed angle, with Bents 1 through 4 identified. The plan shows deck geometry, clearance envelopes (point of minimum vertical clearance, existing and future), stationing along SR 21 and the railroad centerline, and horizontal/vertical clearance callouts; the elevation below shows bent locations, bearing types (EXP/FIX), pile schematics at Bents 2 and 3, fencing, and groundline references. A partial schedule table and general notes referenced elsewhere on the sheet govern clearance minimums and station/elevation measurement conventions but are not reproduced here."
}

p01_r01Plan

  • Wingwall/Retaining WallWALL 1×2rectangularFront face of Wall 1 shown at both bridges (left and right)
  • Wingwall/Retaining WallWALL 2×2rectangularFront face of Wall 2 shown at both bridges

12'-1" MIN clearance to existing track74'-7 5/16" Distance75'-10 5/16" DistanceN 2°-23'-16.7" E Bearing angle1'-9 1/2" Offset6'-0" Offset40'-0" Gutter to gutter width43'-7" Out to out width+18 more

Page 13

crop

p13_r05 section b b

page 13 · gdot_plan_649084f395824aaebf1f5ed48132696f_p13_r05_section_b_b
Original
p13_r05 section b b
{
  "view": "Section",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown in Section B-B (with rebar detail) and in Section at End Bent and Wall (labeled CAP)"
    },
    {
      "name": "Reinforcement bar",
      "tag": "411",
      "shape": "bar",
      "material": "reinforced steel",
      "count": 1,
      "note": "Corner/top bar in cap cross-section"
    },
    {
      "name": "Reinforcement bar",
      "tag": "2-412",
      "shape": "bar",
      "material": "reinforced steel",
      "count": 2,
      "note": "Top bars shown with hooks into corners"
    },
    {
      "name": "Reinforcement bar",
      "tag": "4-1010",
      "shape": "bar",
      "material": "reinforced steel",
      "count": 4,
      "note": "Longitudinal bars in cap"
    },
    {
      "name": "Reinforcement bar",
      "tag": "2-415 SERIES",
      "shape": "bar",
      "material": "reinforced steel",
      "count": 2,
      "note": "Vertical stirrup/tie bars extending down from cap, series designation"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "Two piles shown below cap in both sections, broken line indicates continuation"
    },
    {
      "name": "Wingwall/wall",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Vertical wall element connected to cap via zigzag reinforcement pattern"
    },
    {
      "name": "Coping",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Cap element atop the wall"
    }
  ],
  "measurements": [
    {
      "label": "Cap width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "Section B-B cap"
    },
    {
      "label": "Clear cover",
      "value": "2\" MIN.",
      "unit": "in",
      "appliesTo": "top reinforcement clearance"
    },
    {
      "label": "Vertical dimension",
      "value": "2'-0\"",
      "unit": "ft",
      "appliesTo": "cap depth, MIN."
    },
    {
      "label": "Typical spacing",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "TYP. dimension within cap"
    },
    {
      "label": "Side clearance",
      "value": "2\" CL. 3 SIDES",
      "unit": "in",
      "appliesTo": "reinforcement clearance"
    },
    {
      "label": "Half width",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "left half of cap width, from centerline"
    },
    {
      "label": "Half width",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "right half of cap width, from centerline"
    },
    {
      "label": "Scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "Section B-B"
    },
    {
      "label": "Minimum distance",
      "value": "6'-0\" MIN.",
      "unit": "ft",
      "appliesTo": "overall dimension from B.F.P.R. to wall in end bent section"
    },
    {
      "label": "Cap width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "CAP in end bent section"
    },
    {
      "label": "Minimum depth",
      "value": "2'-0\" MIN.",
      "unit": "ft",
      "appliesTo": "CAP depth in end bent section"
    },
    {
      "label": "Scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "Section at End Bent and Wall"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B",
    "SCALE: 3/4\" = 1'-0\"",
    "SECTION AT END BENT AND WALL",
    "SCALE: 3/4\" = 1'-0\"",
    "CAP",
    "COPING",
    "FRONT FACE OF WALL",
    "B.F.P.R."
  ],
  "description": "This crop shows two related structural sections: Section B-B, a detailed cross-section of a reinforced concrete cap/beam with rebar callouts (411, 2-412, 4-1010, 2-415 series) and clearance dimensions, and Section at End Bent and Wall, showing the same cap element in relation to an adjoining wall with coping, illustrating the connection geometry between an end bent cap and a wingwall/retaining wall. Both sections include piles shown schematically below the cap and are drawn at 3/4\" = 1'-0\" scale."
}

p13_r05 section b bSection

  • Wingwall/wall×1rectangularreinforced concreteVertical wall element connected to cap via zigzag reinforcement pattern

3'-0" ft-in Cap width2" MIN. in Clear cover2'-0" ft Vertical dimension1'-0" ft Typical spacing2" CL. 3 SIDES in Side clearance1'-6" ft-in Half width1'-6" ft-in Half width3/4" = 1'-0" Scale+4 more

crop

p13_r05

page 13 · other_p13_r05
Original
p13_r05
{
  "view": "Section",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown in cross section (Section B-B) and in relation view (Section at End Bent and Wall), labeled 'CAP'"
    },
    {
      "name": "Reinforcement bar",
      "tag": "411",
      "shape": "",
      "material": "steel reinforcement",
      "count": 1,
      "note": "Corner/outer bars in cap section, shown at four corners"
    },
    {
      "name": "Reinforcement bar",
      "tag": "2-412",
      "shape": "",
      "material": "steel reinforcement",
      "count": 2,
      "note": "Top bars in cap section"
    },
    {
      "name": "Reinforcement bar",
      "tag": "4-1010",
      "shape": "",
      "material": "steel reinforcement",
      "count": 4,
      "note": "Bars shown in middle of cap section"
    },
    {
      "name": "Reinforcement bar",
      "tag": "2-415 SERIES",
      "shape": "",
      "material": "steel reinforcement",
      "count": 2,
      "note": "Vertical bars extending down from cap, likely pile/column dowels"
    },
    {
      "name": "Pile or column",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Two circular bars/piles shown below cap in Section B-B and as vertical supports in end bent section"
    },
    {
      "name": "Wingwall / retaining wall",
      "tag": "",
      "shape": "rectangular, vertical",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Wall shown at right side of end bent section, with coping cap on top"
    },
    {
      "name": "Coping",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Cap element atop wall, labeled COPING"
    }
  ],
  "measurements": [
    {
      "label": "Cap width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "Cap, Section B-B"
    },
    {
      "label": "Clear cover top",
      "value": "2\" MIN. CL.",
      "unit": "in",
      "appliesTo": "Cap, Section B-B"
    },
    {
      "label": "Cap height (min)",
      "value": "2'-0\" MIN.",
      "unit": "ft-in",
      "appliesTo": "Cap, Section B-B"
    },
    {
      "label": "Bar spacing typical",
      "value": "1'-0\" TYP.",
      "unit": "ft-in",
      "appliesTo": "Cap reinforcement, Section B-B"
    },
    {
      "label": "Clear cover 3 sides",
      "value": "2\" CL. 3 SIDES",
      "unit": "in",
      "appliesTo": "Cap reinforcement, Section B-B"
    },
    {
      "label": "Half-width dimension",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "Section B-B, left half"
    },
    {
      "label": "Half-width dimension",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "Section B-B, right half"
    },
    {
      "label": "Overall min width",
      "value": "6'-0\" MIN.",
      "unit": "ft-in",
      "appliesTo": "Section at End Bent and Wall"
    },
    {
      "label": "Cap width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "Cap, Section at End Bent and Wall"
    },
    {
      "label": "Cap height min",
      "value": "2'-0\" MIN.",
      "unit": "ft-in",
      "appliesTo": "Cap, Section at End Bent and Wall"
    }
  ],
  "notes": [
    "2\" MIN. CL.",
    "2\" CL. 3 SIDES",
    "1'-0\" TYP.",
    "B.F.P.R.",
    "6'-0\" MIN.",
    "2'-0\" MIN."
  ],
  "labels": [
    "SECTION B-B",
    "SCALE: 3/4\" = 1'-0\"",
    "SECTION AT END BENT AND WALL",
    "SCALE: 3/4\" = 1'-0\"",
    "CAP",
    "COPING",
    "FRONT FACE OF WALL",
    "B.F.P.R."
  ],
  "description": "This crop shows two structural cross-section details: 'Section B-B' depicting the reinforcing steel arrangement inside a bent cap (rectangular concrete section with corner bars, top bars, and dowel bars extending downward to circular pile/column elements), and 'Section at End Bent and Wall' showing the relationship between the cap, its downward dowels, and an adjacent wingwall with a coping cap, including minimum clearance and width dimensions. These details document reinforcement layout and geometric clearances for a bridge end bent cap and its connection to a wingwall."
}

p13_r05Section

  • Wingwall / retaining wall×1rectangular, verticalreinforced concreteWall shown at right side of end bent section, with coping cap on top

3'-0" ft-in Cap width2" MIN. CL. in Clear cover top2'-0" MIN. ft-in Cap height (min)1'-0" TYP. ft-in Bar spacing typical2" CL. 3 SIDES in Clear cover 3 sides1'-6" ft-in Half-width dimension1'-6" ft-in Half-width dimension6'-0" MIN. ft-in Overall min width+2 more

Page 17

crop

p17_r05 section b b

page 17 · gdot_plan_649084f395824aaebf1f5ed48132696f_p17_r05_section_b_b
Original
p17_r05 section b b
{
  "view": "Section",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown in both Section B-B (cross section of cap reinforcement) and Section at End Bent and Wall (cap in elevation/side view)"
    },
    {
      "name": "Longitudinal reinforcement bar",
      "tag": "441",
      "shape": "straight bar",
      "material": "reinforcing steel",
      "count": null,
      "note": "Corner bars in cap section, quantity not stated for this mark alone"
    },
    {
      "name": "Reinforcement bar (top)",
      "tag": "2-442",
      "shape": "straight bar",
      "material": "reinforcing steel",
      "count": 2,
      "note": "Top bars in cap"
    },
    {
      "name": "Reinforcement bar (stirrup/tie)",
      "tag": "4-1040",
      "shape": "bent/stirrup",
      "material": "reinforcing steel",
      "count": 4,
      "note": "Interior ties shown with hooks"
    },
    {
      "name": "Vertical reinforcement bar",
      "tag": "2-445 SERIES",
      "shape": "straight bar (dowel/column bar)",
      "material": "reinforcing steel",
      "count": 2,
      "note": "Extends down from cap, break line shown indicating continuation"
    },
    {
      "name": "Wingwall / retaining wall",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown in elevation with coping and front face labeled"
    },
    {
      "name": "Coping",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "Cap element atop wall"
    },
    {
      "name": "Column/pile (support under cap)",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown with break line below cap, two per section"
    }
  ],
  "measurements": [
    {
      "label": "Cap width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "Section B-B cap"
    },
    {
      "label": "Minimum clear cover to top bars",
      "value": "2\" MIN. CL.",
      "unit": "in",
      "appliesTo": "cap section, top reinforcement"
    },
    {
      "label": "Minimum cap depth",
      "value": "2'-0\" MIN.",
      "unit": "ft-in",
      "appliesTo": "cap section"
    },
    {
      "label": "Typical spacing",
      "value": "1'-0\"",
      "unit": "ft-in",
      "appliesTo": "cap section, TYP. dimension"
    },
    {
      "label": "Clear cover 3 sides",
      "value": "2\" CL. 3 SIDES",
      "unit": "in",
      "appliesTo": "cap section bars"
    },
    {
      "label": "Half-width dimension left",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "cap section, left of centerline"
    },
    {
      "label": "Half-width dimension right",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "cap section, right of centerline"
    },
    {
      "label": "Scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "Section B-B"
    },
    {
      "label": "Overall minimum distance",
      "value": "6'-0\" MIN.",
      "unit": "ft-in",
      "appliesTo": "Section at End Bent and Wall, from B.F.P.R. to wall"
    },
    {
      "label": "Cap width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "CAP in end bent/wall section"
    },
    {
      "label": "Minimum cap depth",
      "value": "2'-0\" MIN.",
      "unit": "ft-in",
      "appliesTo": "CAP in end bent/wall section"
    },
    {
      "label": "Scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "Section at End Bent and Wall"
    }
  ],
  "notes": [
    "2\" MIN. CL.",
    "2\" CL. 3 SIDES",
    "1'-0\" TYP.",
    "2'-0\" MIN.",
    "B.F.P.R.",
    "6'-0\" MIN."
  ],
  "labels": [
    "SECTION B-B",
    "SCALE: 3/4\" = 1'-0\"",
    "SECTION AT END BENT AND WALL",
    "SCALE: 3/4\" = 1'-0\"",
    "CAP",
    "COPING",
    "FRONT FACE OF WALL",
    "441",
    "2-442",
    "4-1040",
    "2-445 SERIES"
  ],
  "description": "This crop shows two related concrete detail sections: 'Section B-B', a cross-sectional cut through a bent cap showing reinforcement bar arrangement (corner bars, top bars, ties, and vertical dowels) with clear cover dimensions; and 'Section at End Bent and Wall', an elevation-type section showing the cap in relation to a wingwall/retaining wall structure with coping and front face of wall labeled, along with minimum clearance and offset dimensions. Together they document reinforcement detailing and geometric relationships between an end bent cap and an adjacent wall for a bridge substructure."
}

p17_r05 section b bSection

  • Wingwall / retaining wall×1rectangularreinforced concreteShown in elevation with coping and front face labeled

3'-0" ft-in Cap width2" MIN. CL. in Minimum clear cover to top bars2'-0" MIN. ft-in Minimum cap depth1'-0" ft-in Typical spacing2" CL. 3 SIDES in Clear cover 3 sides1'-6" ft-in Half-width dimension left1'-6" ft-in Half-width dimension right3/4" = 1'-0" Scale+4 more

crop

p17_r05

page 17 · other_p17_r05
Original
p17_r05
{
  "view": "Section",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown in cross section (Section B-B) and in the plan/section view labeled 'CAP' at the End Bent and Wall detail"
    },
    {
      "name": "Reinforcement bar (stirrup/tie)",
      "tag": "441",
      "shape": "rectangular closed hoop",
      "material": "reinforced steel",
      "count": 1,
      "note": "Outer perimeter stirrup in Section B-B"
    },
    {
      "name": "Reinforcement bar (corner bar)",
      "tag": "442",
      "shape": "",
      "material": "reinforced steel",
      "count": 2,
      "note": "Labeled '2-442' at top corners of cap section"
    },
    {
      "name": "Reinforcement bar (longitudinal)",
      "tag": "1040",
      "shape": "straight bar",
      "material": "reinforced steel",
      "count": 4,
      "note": "Labeled '4-1040' running through cap"
    },
    {
      "name": "Reinforcement bar (series)",
      "tag": "445 SERIES",
      "shape": "",
      "material": "reinforced steel",
      "count": 2,
      "note": "Labeled '2-445 SERIES', vertical bars extending down from cap, likely pile/column dowels"
    },
    {
      "name": "Pile or column support",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Two circular bar positions shown with break marks below cap in Section B-B, and two vertical supports below CAP in end bent section"
    },
    {
      "name": "Wall (retaining/wingwall)",
      "tag": "",
      "shape": "rectangular, vertical",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown at right side of 'Section at End Bent and Wall' with coping on top"
    },
    {
      "name": "Coping",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Cap element atop the wall, labeled 'COPING'"
    }
  ],
  "measurements": [
    {
      "label": "Cap width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "Section B-B cap section"
    },
    {
      "label": "Clear cover top",
      "value": "2\" MIN. CL.",
      "unit": "in",
      "appliesTo": "Section B-B, top of cap"
    },
    {
      "label": "Min. depth to bars",
      "value": "2'-0\" MIN.",
      "unit": "ft-in",
      "appliesTo": "Section B-B cap section"
    },
    {
      "label": "Typical spacing",
      "value": "1'-0\" TYP.",
      "unit": "ft-in",
      "appliesTo": "Section B-B, bar spacing"
    },
    {
      "label": "Clear cover sides",
      "value": "2\" CL. 3 SIDES",
      "unit": "in",
      "appliesTo": "Section B-B cap section"
    },
    {
      "label": "Half-width dimension",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "Section B-B, left half"
    },
    {
      "label": "Half-width dimension",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "Section B-B, right half"
    },
    {
      "label": "Scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "Section B-B"
    },
    {
      "label": "Cap width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "Section at End Bent and Wall, cap"
    },
    {
      "label": "Overall min. width",
      "value": "6'-0\" MIN.",
      "unit": "ft-in",
      "appliesTo": "Section at End Bent and Wall, from B.F.P.R. to wall"
    },
    {
      "label": "Min. depth",
      "value": "2'-0\" MIN.",
      "unit": "ft-in",
      "appliesTo": "Section at End Bent and Wall, cap depth"
    },
    {
      "label": "Scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "Section at End Bent and Wall"
    }
  ],
  "notes": [
    "2\" MIN. CL.",
    "2'-0\" MIN.",
    "1'-0\" TYP.",
    "2\" CL. 3 SIDES",
    "2-445 SERIES",
    "2-442",
    "4-1040",
    "441",
    "B.F.P.R.",
    "6'-0\" MIN.",
    "CAP",
    "COPING",
    "FRONT FACE OF WALL"
  ],
  "labels": [
    "SECTION B-B",
    "SCALE: 3/4\" = 1'-0\"",
    "SECTION AT END BENT AND WALL",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "This crop shows two related reinforced concrete cap details: 'Section B-B', a cross-section through a bent cap showing rebar layout (stirrups marked 441/442, longitudinal bars 1040, and 445-series bars) with cover and spacing dimensions; and 'Section at End Bent and Wall', a section illustrating the relationship between the bent cap, a stepped connection, and an adjacent retaining wall with coping, including minimum width and depth dimensions. Together they document reinforcement and geometry for an end bent cap and its connection to a wingwall/retaining wall structure."
}

p17_r05Section

  • Wall (retaining/wingwall)×1rectangular, verticalreinforced concreteShown at right side of 'Section at End Bent and Wall' with coping on top

3'-0" ft-in Cap width2" MIN. CL. in Clear cover top2'-0" MIN. ft-in Min. depth to bars1'-0" TYP. ft-in Typical spacing2" CL. 3 SIDES in Clear cover sides1'-6" ft-in Half-width dimension1'-6" ft-in Half-width dimension3/4" = 1'-0" Scale+4 more