Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Sealing rib

1 page · 3 crops · ×5

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a sealing-rib component class.

Every dimension read for it1

  • 3/16 inSealing rib thicknessp12 · p12_r09 load plates

Notes on the sheets that carry it

  • p123/16" LOAD PLATES, TOP AND BOTTOM
  • p1212 GAGE INTERNAL PLATES
  • p123/16" SEALING RIB, TOP AND BOTTOM
  • p12PLAN
  • p12BENT 1 SHOWN
  • p12BENT 4 SIMILAR
  • p12C BEAM
  • p1290°-00'-00", TYP.
  • p123/16" SEALING RIB, ALL AROUND
  • p12C BEARING PAD = C 3" DIAMETER HOLE

Every crop it was read in — the drawing beside what the model took off it

Page 12

crop

p12_r09 load plates

page 12 · gdot_plan_649084f395824aaebf1f5ed48132696f_p12_r09_load_plates
Original
p12_r09 load plates
{
  "view": "Detail",
  "objects": [
    {
      "name": "Load plate",
      "tag": "",
      "shape": "rectangular",
      "material": "steel",
      "count": 2,
      "note": "Top and bottom, 3/16\" thick, per callout"
    },
    {
      "name": "Sealing rib",
      "tag": "",
      "shape": "rectangular",
      "material": "steel",
      "count": 2,
      "note": "Top and bottom, 3/16\" thick, per callout"
    },
    {
      "name": "Internal plates",
      "tag": "",
      "shape": "rectangular, striped/ribbed pattern",
      "material": "steel",
      "count": 1,
      "note": "12 gage, shown as internal plates within the section, quantity of individual plates not enumerated"
    }
  ],
  "measurements": [
    {
      "label": "Load plate thickness",
      "value": "3/16",
      "unit": "in",
      "appliesTo": "Load plates"
    },
    {
      "label": "Sealing rib thickness",
      "value": "3/16",
      "unit": "in",
      "appliesTo": "Sealing rib"
    },
    {
      "label": "Internal plate gage",
      "value": "12",
      "unit": "gage",
      "appliesTo": "Internal plates"
    },
    {
      "label": "Overall depth",
      "value": "T",
      "unit": "",
      "appliesTo": "cross section (unlabeled dimension marked T)"
    }
  ],
  "notes": [
    "3/16\" LOAD PLATES, TOP AND BOTTOM",
    "12 GAGE INTERNAL PLATES",
    "3/16\" SEALING RIB, TOP AND BOTTOM"
  ],
  "labels": [],
  "description": "This crop is a detail drawing showing a cross-sectional elevation of what appears to be a modular expansion joint or similar structural component, with top and bottom load plates (3/16\" thick), top and bottom sealing ribs (3/16\" thick), and internal ribbed plates (12 gage) sandwiched between them. A dimension labeled 'T' indicates the overall depth of the section, though its numeric value is not given in this crop."
}

p12_r09 load platesDetail

  • Sealing rib×2rectangularsteelTop and bottom, 3/16" thick, per callout

3/16 in Load plate thickness3/16 in Sealing rib thickness12 gage Internal plate gageT Overall depth

crop

p12_r04

page 12 · other_p12_r04
Original
p12_r04
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "elastomeric (per referenced note panel)",
      "count": 1,
      "note": "Shown with sealing rib and centered 3\" diameter hole for dowel; labeled 'BENT 1 SHOWN, BENT 4 SIMILAR'"
    },
    {
      "name": "Sealing rib",
      "tag": "",
      "shape": "rectangular perimeter strip",
      "material": "elastomeric",
      "count": 1,
      "note": "3/16\" wide, all around perimeter of bearing pad"
    },
    {
      "name": "Dowel hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "3\" diameter hole, centered on bearing pad centerline, aligned with C BEAM"
    },
    {
      "name": "Second bearing pad (partial)",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Adjacent plan view partially visible at right edge of crop, only edge and (L+2) dimension leader visible"
    }
  ],
  "measurements": [
    {
      "label": "L",
      "value": "L",
      "unit": "",
      "appliesTo": "Bearing pad overall length"
    },
    {
      "label": "L/2",
      "value": "L/2",
      "unit": "",
      "appliesTo": "Bearing pad half-length, left of centerline"
    },
    {
      "label": "L/2",
      "value": "L/2",
      "unit": "",
      "appliesTo": "Bearing pad half-length, right of centerline"
    },
    {
      "label": "W",
      "value": "W",
      "unit": "",
      "appliesTo": "Bearing pad overall width"
    },
    {
      "label": "W/2",
      "value": "W/2",
      "unit": "",
      "appliesTo": "Bearing pad half-width, upper"
    },
    {
      "label": "W/2",
      "value": "W/2",
      "unit": "",
      "appliesTo": "Bearing pad half-width, lower"
    },
    {
      "label": "Sealing rib width",
      "value": "3/16",
      "unit": "in",
      "appliesTo": "Bearing pad sealing rib"
    },
    {
      "label": "Dowel hole diameter",
      "value": "3",
      "unit": "in",
      "appliesTo": "Bearing pad center hole"
    },
    {
      "label": "Angle",
      "value": "90°-00'-00\"",
      "unit": "",
      "appliesTo": "Bearing pad orientation, typical"
    },
    {
      "label": "Adjacent pad width dimension",
      "value": "(L+2",
      "unit": "",
      "appliesTo": "Second bearing pad plan view (partial, cut off)"
    }
  ],
  "notes": [
    "PLAN",
    "BENT 1 SHOWN",
    "BENT 4 SIMILAR",
    "C BEAM",
    "90°-00'-00\", TYP.",
    "3/16\" SEALING RIB, ALL AROUND",
    "C BEARING PAD = C 3\" DIAMETER HOLE",
    "PLAN"
  ],
  "labels": [
    "PLAN",
    "B"
  ],
  "description": "This crop shows a plan view detail of a bearing pad (labeled 'Bent 1 Shown, Bent 4 Similar') with overall dimensions L and W, a centered 3-inch diameter dowel hole aligned with the beam centerline, and a 3/16 inch sealing rib around the perimeter. A second, partially visible bearing pad plan view appears at the right edge of the crop with a dimension callout '(L+2' that is cut off. This is a structural detail sheet documenting bearing pad geometry used in conjunction with the bearing pad schedule and design notes referenced elsewhere on the sheet."
}

p12_r04Plan

  • Sealing rib×1rectangular perimeter stripelastomeric3/16" wide, all around perimeter of bearing pad

L LL/2 L/2L/2 L/2W WW/2 W/2W/2 W/23/16 in Sealing rib width3 in Dowel hole diameter+2 more

crop

p12_r09

page 12 · other_p12_r09
Original
p12_r09
{
  "view": "Detail",
  "objects": [
    {
      "name": "Bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "elastomeric (implied by governing note panel)",
      "count": 1,
      "note": "Elevation/section detail showing internal construction with load plates, sealing ribs, and internal plates; overall thickness labeled T."
    },
    {
      "name": "Load plate",
      "tag": "",
      "shape": "rectangular, thin plate",
      "material": "steel (per governing note panel, ASTM A709 Grade 36 or A1011 Grade 36)",
      "count": 2,
      "note": "Top and bottom, 3/16\" thick"
    },
    {
      "name": "Sealing rib",
      "tag": "",
      "shape": "rectangular, thin rib",
      "material": "",
      "count": 2,
      "note": "Top and bottom, 3/16\" thick"
    },
    {
      "name": "Internal plate",
      "tag": "",
      "shape": "rectangular, laminated (multiple horizontal layers shown)",
      "material": "steel (per governing note panel)",
      "count": 1,
      "note": "Shown as multiple horizontal lines/layers, labeled 12 gage internal plates; quantity per pad not shown in this crop"
    }
  ],
  "measurements": [
    {
      "label": "Load plate thickness",
      "value": "3/16",
      "unit": "in",
      "appliesTo": "Load plates, top and bottom"
    },
    {
      "label": "Sealing rib thickness",
      "value": "3/16",
      "unit": "in",
      "appliesTo": "Sealing rib, top and bottom"
    },
    {
      "label": "Internal plate gage",
      "value": "12",
      "unit": "gage",
      "appliesTo": "Internal plates"
    },
    {
      "label": "Overall pad thickness",
      "value": "T",
      "unit": "",
      "appliesTo": "Bearing pad"
    }
  ],
  "notes": [
    "3/16\" LOAD PLATES, TOP AND BOTTOM",
    "3/16\" SEALING RIB, TOP AND BOTTOM",
    "12 GAGE INTERNAL PLATES"
  ],
  "labels": [],
  "description": "This crop is a detail drawing (section/elevation view) of a bearing pad's internal cross-section, showing the layered construction of load plates, sealing ribs, and internal plates within an overall thickness labeled T. It illustrates how the 3/16\" load plates and sealing ribs sandwich the internal plates (12 gage), corresponding to the material notes found elsewhere on the sheet regarding load plate and internal plate specifications."
}

p12_r09Detail

  • Sealing rib×2rectangular, thin ribTop and bottom, 3/16" thick

3/16 in Load plate thickness3/16 in Sealing rib thickness12 gage Internal plate gageT Overall pad thickness