Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Expansion Joint

2 pages · 4 crops · ×2 · deck

Matched toExpansion Joint Systembridge.superstructure.expansion_joint_systemcheckon “Expansion joint”

This class asks for no measurements, so there is no take-off to do against it.

How the sheets named it

Expansion joint (barrier)Expansion joint (in barrier)

Notes on the sheets that carry it

  • p2STANDARD PLAN MODIFICATION - MODIFY THE APPROACH SLAB STANDARD TO INCREASE THE 3/4" EXPANSION JOINT SHOWN BETWEEN THE APPROACH SLAB AND THE BACK FACE PAVING REST AND END POST TO 1 3/8" AT BENT 1 AND 4.
  • p2KEEP THE EXPANSION JOINT AT END BENT CONTINUOUS AROUND END POST.
  • p2INCLUDE COST OF JOINT IN APPROACH SLAB PAYMENT.
  • p2SEE ROADWAY PLANS FOR APPROACH SLAB PAYMENT.
  • p2STANDARD PLAN MODIFICATION - MODIFY THE APPROACH SLAB STANDARD TO INCREASE THE 3/4" EXPANSION JOINT SHOWN BETWEEN THE APPROACH SLAB AND THE BACK FACE PAVING REST AND END POST TO 1 3/8" AT BENT 1 AND 4. KEEP THE EXPANSION JOINT AT END BENT CONTINUOUS AROUND END POST. INCLUDE COST OF JOINT IN APPROACH SLAB PAYMENT. SEE ROADWAY PLANS FOR APPROACH SLAB PAYMENT.
  • p53/4" CHAMFER
  • p5LOW MODULUS SILICONE SEALANT (TYPE A)
  • p51" PREFORMED JOINT FILLER
  • p5HOLD IN PLACE WITH 10d GALV. NAILS.
  • p5DETAILS OF 1" EXPANSION JOINT IN BARRIER
  • p5NO SCALE

Every crop it was read in — the drawing beside what the model took off it

Page 2

crop

p02_r09 standard plan modification modify the ap

page 2 · gdot_plan_649084f395824aaebf1f5ed48132696f_p02_r09_standard_plan_modification_modify_the_ap
Original
p02_r09 standard plan modification modify the ap
{
  "view": "Notes",
  "objects": [
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced in note text; standard plan modification applies to this element"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Joint between approach slab and back face paving rest and end post, dimension increased per note"
    },
    {
      "name": "End post",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced as part of joint location"
    },
    {
      "name": "Bent",
      "tag": "1",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Location where joint width is increased"
    },
    {
      "name": "Bent",
      "tag": "4",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Location where joint width is increased"
    }
  ],
  "measurements": [
    {
      "label": "Expansion joint width (original)",
      "value": "3/4",
      "unit": "in",
      "appliesTo": "Approach slab expansion joint"
    },
    {
      "label": "Expansion joint width (revised)",
      "value": "1 3/8",
      "unit": "in",
      "appliesTo": "Approach slab expansion joint at Bent 1 and 4"
    }
  ],
  "notes": [
    "STANDARD PLAN MODIFICATION - MODIFY THE APPROACH SLAB STANDARD TO INCREASE THE 3/4\" EXPANSION JOINT SHOWN BETWEEN THE APPROACH SLAB AND THE BACK FACE PAVING REST AND END POST TO 1 3/8\" AT BENT 1 AND 4.",
    "KEEP THE EXPANSION JOINT AT END BENT CONTINUOUS AROUND END POST.",
    "INCLUDE COST OF JOINT IN APPROACH SLAB PAYMENT.",
    "SEE ROADWAY PLANS FOR APPROACH SLAB PAYMENT."
  ],
  "labels": [],
  "description": "This crop contains a block of general construction notes (no drawn geometry) describing a standard plan modification for the approach slab expansion joint detail at Bent 1 and Bent 4. It specifies the change in joint width from 3/4 inch to 1 3/8 inch, instructions to keep the joint continuous around the end post, and payment/cost inclusion guidance referencing roadway plans."
}

p02_r09 standard plan modification modify the apNotes

  • Expansion jointJoint between approach slab and back face paving rest and end post, dimension increased per note

3/4 in Expansion joint width (original)1 3/8 in Expansion joint width (revised)

crop

p02_r09

page 2 · other_p02_r09
Original
p02_r09
{
  "view": "Notes",
  "objects": [
    {
      "name": "approach slab",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced in note regarding expansion joint modification at Bent 1 and 4"
    },
    {
      "name": "expansion joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Between approach slab and back face paving rest and end post"
    },
    {
      "name": "end post",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Expansion joint continuous around end post"
    }
  ],
  "measurements": [
    {
      "label": "Existing expansion joint width",
      "value": "3/4",
      "unit": "in",
      "appliesTo": "expansion joint (standard, prior to modification)"
    },
    {
      "label": "Modified expansion joint width",
      "value": "1 3/8",
      "unit": "in",
      "appliesTo": "expansion joint at Bent 1 and 4"
    }
  ],
  "notes": [
    "STANDARD PLAN MODIFICATION - MODIFY THE APPROACH SLAB STANDARD TO INCREASE THE 3/4\" EXPANSION JOINT SHOWN BETWEEN THE APPROACH SLAB AND THE BACK FACE PAVING REST AND END POST TO 1 3/8\" AT BENT 1 AND 4. KEEP THE EXPANSION JOINT AT END BENT CONTINUOUS AROUND END POST. INCLUDE COST OF JOINT IN APPROACH SLAB PAYMENT. SEE ROADWAY PLANS FOR APPROACH SLAB PAYMENT."
  ],
  "labels": [],
  "description": "This crop contains a single printed note block describing a standard plan modification to the approach slab detail, specifying an increase in expansion joint width at Bent 1 and 4 and clarifying payment responsibility. No drawn objects, dimensions figures, or graphical elements are shown, only the note text."
}

p02_r09Notes

  • expansion jointBetween approach slab and back face paving rest and end post

3/4 in Existing expansion joint width1 3/8 in Modified expansion joint width

Page 5

crop

p05_r02 details of 1 expansion joint in barrier

page 5 · gdot_plan_649084f395824aaebf1f5ed48132696f_p05_r02_details_of_1_expansion_joint_in_barrier
Original
p05_r02 details of 1 expansion joint in barrier
{
  "view": "Detail",
  "objects": [
    {
      "name": "Expansion joint (barrier)",
      "tag": "",
      "shape": "rectangular joint with chamfered edges",
      "material": "preformed joint filler / silicone sealant",
      "count": 1,
      "note": "Shown in Plan and Elevation views, joint width 1\" with 3/4\" chamfers on both faces"
    },
    {
      "name": "Barrier (traffic/parapet)",
      "tag": "",
      "shape": "tapered/trapezoidal profile",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown in Side Elevation, only partial profile with expansion joint at base area indicated by 3\" dimension"
    },
    {
      "name": "Preformed joint filler",
      "tag": "",
      "shape": "rectangular strip, 1\" thick",
      "material": "preformed filler material",
      "count": 1,
      "note": "Located within barrier joint, held with 10d galvanized nails per note"
    },
    {
      "name": "Low modulus silicone sealant (Type A)",
      "tag": "",
      "shape": "linear sealant bead",
      "material": "silicone sealant",
      "count": 1,
      "note": "Applied at joint face, both plan and elevation views"
    }
  ],
  "measurements": [
    {
      "label": "Chamfer",
      "value": "3/4",
      "unit": "in",
      "appliesTo": "barrier edge chamfer"
    },
    {
      "label": "Joint filler thickness",
      "value": "1",
      "unit": "in",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "Top offset",
      "value": "3/4",
      "unit": "in",
      "appliesTo": "joint filler top clearance"
    },
    {
      "label": "Bottom offset",
      "value": "3/4",
      "unit": "in",
      "appliesTo": "joint filler bottom clearance (elevation view)"
    },
    {
      "label": "Nail size",
      "value": "10d",
      "unit": "",
      "appliesTo": "galvanized nails holding joint filler"
    },
    {
      "label": "Side elevation offset",
      "value": "3",
      "unit": "in",
      "appliesTo": "barrier side elevation, joint location from base"
    }
  ],
  "notes": [
    "3/4\" CHAMFER",
    "LOW MODULUS SILICONE SEALANT (TYPE A)",
    "1\" PREFORMED JOINT FILLER",
    "HOLD IN PLACE WITH 10d GALV. NAILS.",
    "DETAILS OF 1\" EXPANSION JOINT IN BARRIER",
    "NO SCALE"
  ],
  "labels": [
    "PLAN",
    "ELEVATION",
    "SIDE ELEVATION",
    "DETAILS OF 1\" EXPANSION JOINT IN BARRIER",
    "NO SCALE",
    "NTS"
  ],
  "description": "This crop shows a detail sheet illustrating a 1-inch expansion joint within a concrete traffic barrier, presented in Plan, Elevation, and Side Elevation views. The detail specifies a preformed joint filler with 3/4-inch chamfered edges, sealed with low modulus silicone sealant (Type A), and notes that the filler is held in place with 10d galvanized nails. The side elevation shows a partial tapered barrier profile with the joint located near its base, dimensioned at 3 inches from the base to the joint start."
}

p05_r02 details of 1 expansion joint in barrierDetail

  • Expansion joint (barrier)×1rectangular joint with chamfered edgespreformed joint filler / silicone sealantShown in Plan and Elevation views, joint width 1" with 3/4" chamfers on both faces

3/4 in Chamfer1 in Joint filler thickness3/4 in Top offset3/4 in Bottom offset10d Nail size3 in Side elevation offset

crop

p05_r02

page 5 · other_p05_r02
Original
p05_r02
{
  "view": "Detail",
  "objects": [
    {
      "name": "Expansion joint (in barrier)",
      "tag": "",
      "shape": "rectangular/vertical joint",
      "material": "preformed joint filler with silicone sealant",
      "count": 1,
      "note": "Shown in Plan, Elevation, and Side Elevation views"
    },
    {
      "name": "Barrier",
      "tag": "",
      "shape": "tapered (sloped face)",
      "material": "concrete",
      "count": 1,
      "note": "Side elevation shows tapered barrier profile with chamfer and joint"
    },
    {
      "name": "Chamfer",
      "tag": "",
      "shape": "linear edge chamfer",
      "material": "concrete",
      "count": 1,
      "note": "3/4\" chamfer at barrier edge"
    },
    {
      "name": "Preformed joint filler",
      "tag": "",
      "shape": "rectangular strip",
      "material": "preformed filler material",
      "count": 1,
      "note": "1\" thick, spans joint width"
    },
    {
      "name": "Silicone sealant",
      "tag": "",
      "shape": "linear bead",
      "material": "low modulus silicone (Type A)",
      "count": 1,
      "note": "Applied at joint face"
    }
  ],
  "measurements": [
    {
      "label": "Chamfer size",
      "value": "3/4",
      "unit": "in",
      "appliesTo": "barrier edge chamfer"
    },
    {
      "label": "Joint filler cover (plan)",
      "value": "3/4",
      "unit": "in",
      "appliesTo": "preformed joint filler, plan view top"
    },
    {
      "label": "Joint filler cover (plan)",
      "value": "3/4",
      "unit": "in",
      "appliesTo": "preformed joint filler, plan view bottom"
    },
    {
      "label": "Preformed joint filler thickness",
      "value": "1",
      "unit": "in",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "Joint filler cover (elevation)",
      "value": "3/4",
      "unit": "in",
      "appliesTo": "preformed joint filler, elevation view top"
    },
    {
      "label": "Offset dimension",
      "value": "3",
      "unit": "in",
      "appliesTo": "side elevation, base of barrier"
    }
  ],
  "notes": [
    "HOLD IN PLACE WITH 10d GALV. NAILS."
  ],
  "labels": [
    "PLAN",
    "ELEVATION",
    "SIDE ELEVATION",
    "DETAILS OF 1\" EXPANSION JOINT IN BARRIER",
    "NO SCALE",
    "JOINTS"
  ],
  "description": "This crop is a detail sheet showing the construction of a 1-inch expansion joint within a concrete barrier, illustrated in plan, elevation, and side elevation views. It specifies a 3/4-inch chamfer, 1-inch preformed joint filler, and low modulus silicone sealant (Type A) at the joint, with the filler held in place using 10d galvanized nails. The side elevation shows the tapered barrier profile with a 3-inch offset dimension near its base."
}

p05_r02Detail

  • Expansion joint (in barrier)×1rectangular/vertical jointpreformed joint filler with silicone sealantShown in Plan, Elevation, and Side Elevation views

3/4 in Chamfer size3/4 in Joint filler cover (plan)3/4 in Joint filler cover (plan)1 in Preformed joint filler thickness3/4 in Joint filler cover (elevation)3 in Offset dimension