Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Dowel Hole

5 pages · 9 crops · ×5 · other

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a dowel-hole or formed-opening class.

How the sheets named it

Dowel bar hole

Every dimension read for it5

  • 3 inDowel hole diameterp14 · p14_r01 plan
  • 12 inDowel hole depthp14 · p14_r01 plan
  • 3 in DIAHole diameterp14 · p14_r01
  • 12 in DEEPHole depthp14 · p14_r01
  • 3" DIA. X 12" DEEP inDowel hole sizep17 · p17_r01

Notes on the sheets that carry it

  • p12PLAN
  • p12BENT 1 SHOWN
  • p12BENT 4 SIMILAR
  • p12C BEAM
  • p1290°-00'-00", TYP.
  • p123/16" SEALING RIB, ALL AROUND
  • p12C BEARING PAD = C 3" DIAMETER HOLE
  • p13FORM 3" DIA. X 12" DEEP HOLE FOR 1 1/2" DIA. SMOOTH DOWEL, TYP.
  • p13SEE DETAIL 1 BRIDGE SHEET 16
  • p13SEE DETAIL 2 BRIDGE SHEET 16
  • p13B.F.P.R.
  • p13SR 21 EB = PGL
  • p13SR 21 WB = PGL
  • p13BEGIN BRIDGE B.F.P.R. BENT 1
  • p13AHEAD
  • p13℄ SR 21
  • p13℄ BRG.
  • p14FORM 3" DIA. X 12" DEEP HOLE FOR 1 1/2" DIA. SMOOTH DOWEL BAR, TYP.
  • p1481°-20'-05.0", TYP.
  • p17SEE DETAIL 3 BRIDGE SHEET 16
  • p17SEE DETAIL 4 BRIDGE SHEET 16
  • p17END BRIDGE B.F.P.R. BENT 4 STA. 19+15.00

Every crop it was read in — the drawing beside what the model took off it

Page 12

crop

p12_r04

page 12 · other_p12_r04
Original
p12_r04
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "elastomeric (per referenced note panel)",
      "count": 1,
      "note": "Shown with sealing rib and centered 3\" diameter hole for dowel; labeled 'BENT 1 SHOWN, BENT 4 SIMILAR'"
    },
    {
      "name": "Sealing rib",
      "tag": "",
      "shape": "rectangular perimeter strip",
      "material": "elastomeric",
      "count": 1,
      "note": "3/16\" wide, all around perimeter of bearing pad"
    },
    {
      "name": "Dowel hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "3\" diameter hole, centered on bearing pad centerline, aligned with C BEAM"
    },
    {
      "name": "Second bearing pad (partial)",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Adjacent plan view partially visible at right edge of crop, only edge and (L+2) dimension leader visible"
    }
  ],
  "measurements": [
    {
      "label": "L",
      "value": "L",
      "unit": "",
      "appliesTo": "Bearing pad overall length"
    },
    {
      "label": "L/2",
      "value": "L/2",
      "unit": "",
      "appliesTo": "Bearing pad half-length, left of centerline"
    },
    {
      "label": "L/2",
      "value": "L/2",
      "unit": "",
      "appliesTo": "Bearing pad half-length, right of centerline"
    },
    {
      "label": "W",
      "value": "W",
      "unit": "",
      "appliesTo": "Bearing pad overall width"
    },
    {
      "label": "W/2",
      "value": "W/2",
      "unit": "",
      "appliesTo": "Bearing pad half-width, upper"
    },
    {
      "label": "W/2",
      "value": "W/2",
      "unit": "",
      "appliesTo": "Bearing pad half-width, lower"
    },
    {
      "label": "Sealing rib width",
      "value": "3/16",
      "unit": "in",
      "appliesTo": "Bearing pad sealing rib"
    },
    {
      "label": "Dowel hole diameter",
      "value": "3",
      "unit": "in",
      "appliesTo": "Bearing pad center hole"
    },
    {
      "label": "Angle",
      "value": "90°-00'-00\"",
      "unit": "",
      "appliesTo": "Bearing pad orientation, typical"
    },
    {
      "label": "Adjacent pad width dimension",
      "value": "(L+2",
      "unit": "",
      "appliesTo": "Second bearing pad plan view (partial, cut off)"
    }
  ],
  "notes": [
    "PLAN",
    "BENT 1 SHOWN",
    "BENT 4 SIMILAR",
    "C BEAM",
    "90°-00'-00\", TYP.",
    "3/16\" SEALING RIB, ALL AROUND",
    "C BEARING PAD = C 3\" DIAMETER HOLE",
    "PLAN"
  ],
  "labels": [
    "PLAN",
    "B"
  ],
  "description": "This crop shows a plan view detail of a bearing pad (labeled 'Bent 1 Shown, Bent 4 Similar') with overall dimensions L and W, a centered 3-inch diameter dowel hole aligned with the beam centerline, and a 3/16 inch sealing rib around the perimeter. A second, partially visible bearing pad plan view appears at the right edge of the crop with a dimension callout '(L+2' that is cut off. This is a structural detail sheet documenting bearing pad geometry used in conjunction with the bearing pad schedule and design notes referenced elsewhere on the sheet."
}

p12_r04Plan

  • Dowel hole×1circular3" diameter hole, centered on bearing pad centerline, aligned with C BEAM

L LL/2 L/2L/2 L/2W WW/2 W/2W/2 W/23/16 in Sealing rib width3 in Dowel hole diameter+2 more

Page 13

crop

p13_r01 title block

page 13 · gdot_plan_649084f395824aaebf1f5ed48132696f_p13_r01_title_block
Original
p13_r01 title block
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "BENT 1",
      "shape": "rectangular, elongated with rounded/elliptical ends",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown in two halves: 'BENT 1 RIGHT' and 'BENT 1 LEFT' plan views, each spanning 6 beam lines"
    },
    {
      "name": "Dowel hole",
      "tag": "",
      "shape": "circular, 3\" dia x 12\" deep",
      "material": "concrete (formed hole)",
      "count": 4,
      "note": "Formed for 1 1/2\" dia smooth dowel, typ., located at each end of both bent cap segments; see Detail 1 Bridge Sheet 16"
    },
    {
      "name": "Bearing device",
      "tag": "BRG.",
      "shape": "rectangular grid pattern (cross-hatched)",
      "material": "not stated (likely elastomeric or steel bearing)",
      "count": 2,
      "note": "Centerline of bearing marked at each end near BFPR; see Detail 2 Bridge Sheet 16"
    },
    {
      "name": "Beam centerline marker",
      "tag": "BEAM 1 - BEAM 12",
      "shape": "linear centerline",
      "material": "n/a",
      "count": 12,
      "note": "Centerlines of PSC beams shown along both bent cap plans, spaced per dimensions given"
    },
    {
      "name": "Bridge begin/reference point (B.F.P.R.)",
      "tag": "",
      "shape": "point marker",
      "material": "n/a",
      "count": 2,
      "note": "Beginning face of pier/reference point noted at both bent segments"
    }
  ],
  "measurements": [
    {
      "label": "Span dimension",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "between bent cap segments, both sides"
    },
    {
      "label": "Beam spacing (typ.)",
      "value": "7'-7\"",
      "unit": "ft-in",
      "appliesTo": "beam centerline spacing, repeated multiple times"
    },
    {
      "label": "Beam spacing (typ., detail)",
      "value": "7'-7 1/16\"",
      "unit": "ft-in",
      "appliesTo": "detailed beam spacing dimension line"
    },
    {
      "label": "End overhang",
      "value": "3'-0 7/8\"",
      "unit": "ft-in",
      "appliesTo": "end of bent cap to first beam centerline"
    },
    {
      "label": "End overhang (other side)",
      "value": "6'-10 1/2\"",
      "unit": "ft-in",
      "appliesTo": "cap end dimension"
    },
    {
      "label": "End overhang (other side, alt)",
      "value": "6'-10 9/16\"",
      "unit": "ft-in",
      "appliesTo": "cap end dimension"
    },
    {
      "label": "Total cap length segment",
      "value": "44'-1 1/16\"",
      "unit": "ft-in",
      "appliesTo": "overall length of bent cap plan segment (both Right and Left)"
    },
    {
      "label": "Dowel hole spacing",
      "value": "2 3/4\"",
      "unit": "in",
      "appliesTo": "typ. spacing of dowel holes"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "deg-min-sec",
      "appliesTo": "typ. skew angle of bent, repeated multiple times"
    },
    {
      "label": "Bearing centerline offset",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "offset from BFPR to bearing centerline"
    },
    {
      "label": "Bearing centerline offset (alt)",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "offset dimension near bearing"
    },
    {
      "label": "Bearing spacing",
      "value": "2'-9 3/8\"",
      "unit": "ft-in",
      "appliesTo": "spacing between bearing marks"
    },
    {
      "label": "Dowel hole edge dimension",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": "dimension to dowel hole location, both ends"
    },
    {
      "label": "Cap end width",
      "value": "3'-0 1/16\"",
      "unit": "ft-in",
      "appliesTo": "width at rounded end of bent cap"
    },
    {
      "label": "Station",
      "value": "STA. 17+19.65",
      "unit": "",
      "appliesTo": "Begin Bridge, B.F.P.R. Bent 1 (right side)"
    },
    {
      "label": "Station",
      "value": "STA. 17+23.00",
      "unit": "",
      "appliesTo": "reference station, right side"
    },
    {
      "label": "Station",
      "value": "STA. 17+26.35",
      "unit": "",
      "appliesTo": "reference station, left side"
    },
    {
      "label": "Project number",
      "value": "001918I",
      "unit": "",
      "appliesTo": "title block, P.J. NO."
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 1 BRIDGE SHEET 16",
    "SEE DETAIL 2 BRIDGE SHEET 16",
    "B.F.P.R.",
    "SR 21 EB = PGL",
    "SR 21 WB = PGL",
    "BEGIN BRIDGE B.F.P.R. BENT 1",
    "AHEAD"
  ],
  "labels": [
    "PLAN (BENT 1 RIGHT)",
    "PLAN (BENT 1 LEFT)",
    "GDOT",
    "P.J. NO.",
    "CL SR 21",
    "CL BRG.",
    "CL BEAM 1",
    "CL BEAM 2",
    "CL BEAM 3",
    "CL BEAM 4",
    "CL BEAM 5",
    "CL BEAM 6",
    "CL BEAM 7",
    "CL BEAM 8",
    "CL BEAM 9",
    "CL BEAM 10",
    "CL BEAM 11",
    "CL BEAM 12"
  ],
  "description": "This crop shows two plan views of Bent 1 bent cap for a bridge over SR 21 (right and left segments, split by the roadway alignment), detailing beam centerline spacing for Beams 1 through 12, bearing centerline locations, dowel hole details for a 1 1/2\" smooth dowel, and skew angle of approximately 81°-20'-05.0\". Stationing for the beginning of the bridge and the B.F.P.R. reference point at Bent 1 is called out, along with cross-references to Detail 1 and Detail 2 on Bridge Sheet 16. This is a fragment of the bent cap plan documenting bearing/dowel layout and beam spacing, not a complete bridge plan."
}

p13_r01 title blockPlan

  • Dowel hole×4circular, 3" dia x 12" deepconcrete (formed hole)Formed for 1 1/2" dia smooth dowel, typ., located at each end of both bent cap segments; see Detail 1 Bridge Sheet 16

22'-0" ft-in Span dimension7'-7" ft-in Beam spacing (typ.)7'-7 1/16" ft-in Beam spacing (typ., detail)3'-0 7/8" ft-in End overhang6'-10 1/2" ft-in End overhang (other side)6'-10 9/16" ft-in End overhang (other side, alt)44'-1 1/16" ft-in Total cap length segment2 3/4" in Dowel hole spacing+10 more

crop

p13_r01

page 13 · other_p13_r01
Original
p13_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "BENT 1 RIGHT",
      "shape": "rectangular with rounded/tapered ends",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shows beam bearing locations for beams 7-12; dowel holes and bearing details at each beam line."
    },
    {
      "name": "Bent cap",
      "tag": "BENT 1 LEFT",
      "shape": "rectangular with rounded/tapered ends",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shows beam bearing locations for beams 1-6; dowel holes and bearing details at each beam line."
    },
    {
      "name": "Bearing",
      "tag": "BRG.",
      "shape": "rectangular (small plan symbol)",
      "material": "",
      "count": 12,
      "note": "Bearing centerlines shown at each beam location on both bent caps (6 per cap)."
    },
    {
      "name": "Dowel hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Formed 3\" dia. x 12\" deep holes for 1-1/2\" dia. smooth dowels, typical at cap ends per Detail 1."
    },
    {
      "name": "Beam",
      "tag": "BEAM 1-12",
      "shape": "",
      "material": "",
      "count": 12,
      "note": "Centerlines of beams shown as reference marks along both bent caps; beams themselves not shown, only centerline callouts."
    }
  ],
  "measurements": [
    {
      "label": "Span between bents",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "between Bent 1 Right and centerline SR 21"
    },
    {
      "label": "Span between bents",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "between centerline SR 21 and Bent 1 Left"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "Bent 1 Right, typical"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "Bent 1 Left, typical"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "at centerline SR 21"
    },
    {
      "label": "Cap edge dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "Bent 1 Right end"
    },
    {
      "label": "Cap edge dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "Bent 1 Left end"
    },
    {
      "label": "Cap end offset",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "Bent 1 Right"
    },
    {
      "label": "Cap end offset",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "Bent 1 Left"
    },
    {
      "label": "Beam spacing dimension",
      "value": "2'-9 3/8\"",
      "unit": "",
      "appliesTo": "Bent 1 Right, beam 8 area"
    },
    {
      "label": "Beam spacing dimension",
      "value": "2'-9 3/8\"",
      "unit": "",
      "appliesTo": "Bent 1 Left, beam 5 area"
    },
    {
      "label": "Dowel spacing",
      "value": "2 3/4\"",
      "unit": "",
      "appliesTo": "typical, both bents"
    },
    {
      "label": "Beam centerline spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "repeated between beams 7-12 and 1-6"
    },
    {
      "label": "Beam centerline spacing (alt callout)",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "repeated between beams 7-12 and 1-6"
    },
    {
      "label": "End segment dimension",
      "value": "3'-0 7/8\"",
      "unit": "",
      "appliesTo": "Bent 1 Right, both ends"
    },
    {
      "label": "End segment dimension",
      "value": "3'-0 7/8\"",
      "unit": "",
      "appliesTo": "Bent 1 Left, both ends"
    },
    {
      "label": "Cumulative dimension",
      "value": "6'-10 1/2\"",
      "unit": "",
      "appliesTo": "Bent 1 Right, beam 12 end"
    },
    {
      "label": "Cumulative dimension",
      "value": "6'-10 1/2\"",
      "unit": "",
      "appliesTo": "Bent 1 Left, beam 6 end"
    },
    {
      "label": "Cumulative dimension",
      "value": "6'-10 3/16\"",
      "unit": "",
      "appliesTo": "Bent 1 Right, beam 7 end"
    },
    {
      "label": "Cumulative dimension",
      "value": "6'-10 3/16\"",
      "unit": "",
      "appliesTo": "Bent 1 Left, beam 1 end"
    },
    {
      "label": "Overall cap length",
      "value": "44'-1 1/16\"",
      "unit": "",
      "appliesTo": "Bent 1 Right"
    },
    {
      "label": "Overall cap length",
      "value": "44'-1 1/16\"",
      "unit": "",
      "appliesTo": "Bent 1 Left"
    },
    {
      "label": "Cap depth/width",
      "value": "5'-4 3/4\"",
      "unit": "",
      "appliesTo": "Bent 1 Right and Bent 1 Left end shape"
    },
    {
      "label": "Cap end width",
      "value": "3'-0 1/16\"",
      "unit": "",
      "appliesTo": "Bent 1 Right and Bent 1 Left rounded end"
    },
    {
      "label": "Dowel hole diameter",
      "value": "3",
      "unit": "in (DIA.)",
      "appliesTo": "dowel hole detail"
    },
    {
      "label": "Dowel hole depth",
      "value": "12",
      "unit": "in (DEEP)",
      "appliesTo": "dowel hole detail"
    },
    {
      "label": "Dowel diameter",
      "value": "1 1/2",
      "unit": "in (DIA.)",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "Station",
      "value": "17+19.65",
      "unit": "",
      "appliesTo": "Bent 1 Right, near beam 8"
    },
    {
      "label": "Station",
      "value": "17+23.00",
      "unit": "",
      "appliesTo": "Begin Bridge, B.F.P.R. Bent 1"
    },
    {
      "label": "Station",
      "value": "17+26.35",
      "unit": "",
      "appliesTo": "Bent 1 Left, near beam 5"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 1 BRIDGE SHEET 16",
    "SEE DETAIL 2 BRIDGE SHEET 16",
    "SR 21 EB = PGL",
    "SR 21 WB = PGL",
    "BEGIN BRIDGE B.F.P.R. BENT 1",
    "B.F.P.R.",
    "℄ SR 21",
    "℄ BRG.",
    "AHEAD"
  ],
  "labels": [
    "GDOT",
    "P.I. NO. 0019181",
    "PLAN (BENT 1 RIGHT)",
    "PLAN (BENT 1 LEFT)",
    "℄ BEAM 1",
    "℄ BEAM 2",
    "℄ BEAM 3",
    "℄ BEAM 4",
    "℄ BEAM 5",
    "℄ BEAM 6",
    "℄ BEAM 7",
    "℄ BEAM 8",
    "℄ BEAM 9",
    "℄ BEAM 10",
    "℄ BEAM 11",
    "℄ BEAM 12"
  ],
  "description": "This crop shows two plan views of a skewed bridge bent cap (Bent 1 Right and Bent 1 Left), each supporting six beams (Beams 1-12 total across both), with detailed dimensions for beam spacing, dowel hole locations, bearing centerlines, and skew angle (81°-20'-05.0\"). Station callouts identify the begin-bridge point and centerline of SR 21, with references to detail sheets for dowel and end-block details. This is a structural plan detail for the substructure bent caps of a bridge, likely used for concrete and reinforcement quantity takeoff at the bent cap level."
}

p13_r01Plan

  • Dowel holecircularFormed 3" dia. x 12" deep holes for 1-1/2" dia. smooth dowels, typical at cap ends per Detail 1.

22'-0" Span between bents22'-0" Span between bents81°-20'-05.0" Skew angle81°-20'-05.0" Skew angle81°-20'-05.0" Skew angle3'-0" Cap edge dimension3'-0" Cap edge dimension1'-6" Cap end offset+22 more

Page 14

crop

p14_r01 plan

page 14 · gdot_plan_649084f395824aaebf1f5ed48132696f_p14_r01_plan
Original
p14_r01 plan
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "BENT 2 LEFT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shows bearing lines, beam centerlines, and dowel bar hole locations for 6 beams"
    },
    {
      "name": "Bent cap",
      "tag": "BENT 2 RIGHT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Mirror layout of left bent cap, serving beams 7-12"
    },
    {
      "name": "Beam",
      "tag": "BEAM 1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Centerline shown on bent cap plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 2",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 3",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 4",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 5",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 6",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 7",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 8",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 9",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 10",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 11",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 12",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Dowel bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Formed 3\" dia x 12\" deep hole for 1 1/2\" dia smooth dowel bar, typical at each beam bearing location"
    },
    {
      "name": "Bearing",
      "tag": "C BEARING",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Bearing centerline marked at ends of each bent cap"
    }
  ],
  "measurements": [
    {
      "label": "Overall length between beam 1 and beam 6 centerline group",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "Overall length between beam 7 and beam 12 centerline group",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "End spacing",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT / RIGHT end bays"
    },
    {
      "label": "Interior beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "",
      "appliesTo": "beam spacing"
    },
    {
      "label": "Interior beam spacing (alt notation)",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "beam spacing"
    },
    {
      "label": "End offset",
      "value": "2'-3 3/8\"",
      "unit": "",
      "appliesTo": "cap end"
    },
    {
      "label": "End offset (right side)",
      "value": "2'-3 5/16\"",
      "unit": "",
      "appliesTo": "cap end"
    },
    {
      "label": "Cap width dimension",
      "value": "11 1/2\"",
      "unit": "",
      "appliesTo": "bent cap cross-section"
    },
    {
      "label": "Cap width dimension",
      "value": "2'-1 1/2\"",
      "unit": "",
      "appliesTo": "bent cap cross-section"
    },
    {
      "label": "Overall cap width",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "bent cap width"
    },
    {
      "label": "Setback dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "Dimension near bearing centerline",
      "value": "2'-9 3/8\"",
      "unit": "",
      "appliesTo": "bearing centerline offset"
    },
    {
      "label": "Dowel hole diameter",
      "value": "3",
      "unit": "in",
      "appliesTo": "dowel bar hole"
    },
    {
      "label": "Dowel hole depth",
      "value": "12",
      "unit": "in",
      "appliesTo": "dowel bar hole"
    },
    {
      "label": "Dowel bar diameter",
      "value": "1 1/2",
      "unit": "in",
      "appliesTo": "smooth dowel bar"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "bent skew, typical"
    },
    {
      "label": "Station",
      "value": "17+81.35",
      "unit": "",
      "appliesTo": "BENT 2 LEFT centerline"
    },
    {
      "label": "Station",
      "value": "17+74.65",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT centerline"
    },
    {
      "label": "Distance from centerline to PGL",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "SR 21 WB PGL"
    },
    {
      "label": "Distance from centerline to PGL",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "SR 21 EB PGL"
    },
    {
      "label": "P.I. Number",
      "value": "0019181",
      "unit": "",
      "appliesTo": "title block"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP.",
    "81°-20'-05.0\", TYP."
  ],
  "labels": [
    "GDOT",
    "P.I. NO.",
    "0019181",
    "PLAN (BENT 2 LEFT)",
    "PLAN (BENT 2 RIGHT)",
    "SR 21 WB = PGL",
    "SR 21 EB = PGL",
    "C SR 21",
    "C BEARING",
    "C BENT",
    "C BEAM 1",
    "C BEAM 2",
    "C BEAM 3",
    "C BEAM 4",
    "C BEAM 5",
    "C BEAM 6",
    "C BEAM 7",
    "C BEAM 8",
    "C BEAM 9",
    "C BEAM 10",
    "C BEAM 11",
    "C BEAM 12"
  ],
  "description": "This crop shows a plan view of Bent 2's cap, split into left and right halves (Bent 2 Left serving Beams 1-6, Bent 2 Right serving Beams 7-12), with beam centerlines, bearing centerlines, skew angle callouts, station markers, and dimensioned spacing between beams and dowel bar hole locations. The drawing documents the bent cap geometry, beam bearing layout, and dowel bar hole details for the bridge superstructure support at this bent line, referenced to the SR 21 profile grade lines (PGL) for both eastbound and westbound roadways."
}

p14_r01 planPlan

  • Dowel bar holecircularFormed 3" dia x 12" deep hole for 1 1/2" dia smooth dowel bar, typical at each beam bearing location

42'-6" Overall length between beam 1 and beam 6 centerline group42'-6" Overall length between beam 7 and beam 12 centerline group6'-0" End spacing7'-7 1/2" Interior beam spacing7'-7 1/16" Interior beam spacing (alt notation)2'-3 3/8" End offset2'-3 5/16" End offset (right side)11 1/2" Cap width dimension+13 more

crop

p14_r01

page 14 · other_p14_r01
Original
p14_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent",
      "tag": "BENT 2",
      "shape": "linear/rectangular in plan",
      "material": "reinforced concrete (implied)",
      "count": 1,
      "note": "Shown split into two plan segments labeled BENT 2 LEFT and BENT 2 RIGHT, representing one continuous bent cap"
    },
    {
      "name": "Beam",
      "tag": "BEAM 1",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": "Part of BENT 2 LEFT plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 2",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 3",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 4",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 5",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 6",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 7",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": "Part of BENT 2 RIGHT plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 8",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 9",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 10",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 11",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 12",
      "shape": "linear (centerline shown)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Dowel bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Formed 3\" dia. x 12\" deep hole for 1 1/2\" dia. smooth dowel bar, typical, shown at multiple bearing locations along both bent segments"
    },
    {
      "name": "Bearing line",
      "tag": "℄ BEARING",
      "shape": "linear centerline",
      "material": "",
      "count": 2,
      "note": "One at each end of the bent (left and right plan segments)"
    }
  ],
  "measurements": [
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 2 (both segments), typical"
    },
    {
      "label": "Offset distance",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "SR 21 WB = PGL to ℄ SR 21"
    },
    {
      "label": "Offset distance",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "℄ SR 21 to SR 21 EB = PGL"
    },
    {
      "label": "Station",
      "value": "17+81.35",
      "unit": "",
      "appliesTo": "BENT 2 LEFT, ℄ BENT intersection point"
    },
    {
      "label": "Station",
      "value": "17+74.65",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT, ℄ BENT intersection point"
    },
    {
      "label": "Overall bent width",
      "value": "4'-3\"",
      "unit": "ft-in",
      "appliesTo": "BENT 2 LEFT and RIGHT, cross dimension"
    },
    {
      "label": "Edge offset",
      "value": "1'-2\"",
      "unit": "ft-in",
      "appliesTo": "BENT 2 LEFT/RIGHT, top and bottom edge dimension"
    },
    {
      "label": "Edge offset",
      "value": "2'-1 1/2\"",
      "unit": "ft-in",
      "appliesTo": "BENT 2 LEFT/RIGHT, edge dimension"
    },
    {
      "label": "Edge offset",
      "value": "11 1/2\"",
      "unit": "in",
      "appliesTo": "BENT 2 LEFT/RIGHT, edge dimension"
    },
    {
      "label": "Dimension",
      "value": "2'-9 3/8\"",
      "unit": "ft-in",
      "appliesTo": "BENT 2 LEFT/RIGHT, near ℄ BENT"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7/16\"",
      "unit": "ft-in",
      "appliesTo": "Beam centerline spacing, typical, both segments"
    },
    {
      "label": "Beam spacing (bottom row)",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam centerline spacing, bottom dimension line, both segments"
    },
    {
      "label": "End overhang",
      "value": "6'-0\"",
      "unit": "ft-in",
      "appliesTo": "Beam 1/Beam 6 and Beam 7/Beam 12 end spans"
    },
    {
      "label": "Total length",
      "value": "42'-6\"",
      "unit": "ft-in",
      "appliesTo": "Overall length of BENT 2 LEFT and BENT 2 RIGHT segments"
    },
    {
      "label": "Edge dimension",
      "value": "2'-3 3/8\"",
      "unit": "ft-in",
      "appliesTo": "BENT 2 LEFT/RIGHT, outer edge"
    },
    {
      "label": "Edge dimension",
      "value": "2'-3 5/16\"",
      "unit": "ft-in",
      "appliesTo": "BENT 2 LEFT/RIGHT, outer edge"
    },
    {
      "label": "Hole diameter",
      "value": "3",
      "unit": "in DIA",
      "appliesTo": "Dowel bar hole"
    },
    {
      "label": "Hole depth",
      "value": "12",
      "unit": "in DEEP",
      "appliesTo": "Dowel bar hole"
    },
    {
      "label": "Dowel bar diameter",
      "value": "1 1/2",
      "unit": "in DIA",
      "appliesTo": "Smooth dowel bar"
    },
    {
      "label": "Skew note angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "Typical, repeated at multiple locations"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP."
  ],
  "labels": [
    "GDOT",
    "P.J. NO. 0019181",
    "SR 21 WB = PGL",
    "SR 21 EB = PGL",
    "℄ SR 21",
    "PLAN (BENT 2 LEFT)",
    "PLAN (BENT 2 RIGHT)",
    "℄ BEARING",
    "℄ BENT",
    "STA. 17+81.35",
    "STA. 17+74.65",
    "℄ BEAM 1",
    "℄ BEAM 2",
    "℄ BEAM 3",
    "℄ BEAM 4",
    "℄ BEAM 5",
    "℄ BEAM 6",
    "℄ BEAM 7",
    "℄ BEAM 8",
    "℄ BEAM 9",
    "℄ BEAM 10",
    "℄ BEAM 11",
    "℄ BEAM 12"
  ],
  "description": "This crop shows two plan-view segments labeled PLAN (BENT 2 LEFT) and PLAN (BENT 2 RIGHT), depicting the layout of Bent 2 of a bridge with beam centerlines 1 through 12, bearing lines, and formed dowel bar holes at bearing locations. Dimensions define beam spacing, bent width, skew angle (81°-20'-05.0\"), and stationing (STA. 17+81.35 and STA. 17+74.65) relative to SR 21 westbound and eastbound profile grade lines. The title block in the upper right identifies the sheet as a GDOT project, P.J. No. 0019181."
}

p14_r01Plan

  • Dowel bar holecircularFormed 3" dia. x 12" deep hole for 1 1/2" dia. smooth dowel bar, typical, shown at multiple bearing locations along both bent segments

81°-20'-05.0" Skew angle22'-0" ft-in Offset distance22'-0" ft-in Offset distance17+81.35 Station17+74.65 Station4'-3" ft-in Overall bent width1'-2" ft-in Edge offset2'-1 1/2" ft-in Edge offset+12 more

Page 15

crop

p15_r01 plan

page 15 · gdot_plan_649084f395824aaebf1f5ed48132696f_p15_r01_plan
Original
p15_r01 plan
{
  "view": "Plan",
  "objects": [
    {
      "name": "Beam",
      "tag": "BEAM 1",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, left plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 2",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, left plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 3",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, left plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 4",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, left plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 5",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, left plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 6",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, left plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 7",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, right plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 8",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, right plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 9",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, right plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 10",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, right plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 11",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, right plan"
    },
    {
      "name": "Beam",
      "tag": "BEAM 12",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline shown, right plan"
    },
    {
      "name": "Bearing",
      "tag": "CL BEARING",
      "shape": "point/line",
      "material": "",
      "count": 4,
      "note": "Bearing lines at ends of each plan, shown as dashed transverse lines with 'CL BEARING' label"
    },
    {
      "name": "Bent",
      "tag": "CL BENT",
      "shape": "line",
      "material": "",
      "count": 2,
      "note": "Bent centerline shown per plan segment, one interior support line in each of the two plan views"
    },
    {
      "name": "Dowel bar hole",
      "tag": "",
      "shape": "circular, 3\" dia x 12\" deep",
      "material": "",
      "count": null,
      "note": "Formed holes for 1-1/2\" dia smooth dowel bar, typical, shown at multiple locations along bent/bearing lines"
    }
  ],
  "measurements": [
    {
      "label": "Overall plan width",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "left plan segment near CL SR 21"
    },
    {
      "label": "Overall plan width",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "right plan segment near CL SR 21"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "deg-min-sec",
      "appliesTo": "typical bent/bearing skew, multiple locations"
    },
    {
      "label": "Station",
      "value": "STA. 18+63.35",
      "unit": "station",
      "appliesTo": "left plan, bent location"
    },
    {
      "label": "Station",
      "value": "STA. 18+56.65",
      "unit": "station",
      "appliesTo": "right plan, bent location"
    },
    {
      "label": "Overall beam group width",
      "value": "42'-6\"",
      "unit": "ft-in",
      "appliesTo": "left plan, beam 1 to beam 6"
    },
    {
      "label": "Overall beam group width",
      "value": "42'-6\"",
      "unit": "ft-in",
      "appliesTo": "right plan, beam 7 to beam 12"
    },
    {
      "label": "End spacing",
      "value": "6'-0\"",
      "unit": "ft-in",
      "appliesTo": "Beam 1 to edge, left plan"
    },
    {
      "label": "End spacing",
      "value": "6'-0\"",
      "unit": "ft-in",
      "appliesTo": "Beam 6 to edge, left plan"
    },
    {
      "label": "End spacing",
      "value": "6'-0\"",
      "unit": "ft-in",
      "appliesTo": "Beam 7 to edge, right plan"
    },
    {
      "label": "End spacing",
      "value": "6'-0\"",
      "unit": "ft-in",
      "appliesTo": "Beam 12 to edge, right plan"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam 1 to Beam 2, left plan"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam 2 to Beam 3, left plan"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam 3 to Beam 4, left plan"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam 4 to Beam 5, left plan"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam 5 to Beam 6, left plan"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam 7 to Beam 8, right plan"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam 8 to Beam 9, right plan"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam 9 to Beam 10, right plan"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam 10 to Beam 11, right plan"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam 11 to Beam 12, right plan"
    },
    {
      "label": "Upper spacing (bent line)",
      "value": "7'-7 1/16\"",
      "unit": "ft-in",
      "appliesTo": "repeated interval along bent line, left plan (5 instances)"
    },
    {
      "label": "Upper spacing (bent line)",
      "value": "7'-7 1/16\"",
      "unit": "ft-in",
      "appliesTo": "repeated interval along bent line, right plan (5 instances)"
    },
    {
      "label": "Edge distance",
      "value": "2'-3 3/8\"",
      "unit": "ft-in",
      "appliesTo": "left edge, left plan"
    },
    {
      "label": "Edge distance",
      "value": "2'-3 3/16\"",
      "unit": "ft-in",
      "appliesTo": "right edge, left plan"
    },
    {
      "label": "Edge distance",
      "value": "2'-3 5/16\"",
      "unit": "ft-in",
      "appliesTo": "left edge, right plan"
    },
    {
      "label": "Edge distance",
      "value": "2'-3 3/8\"",
      "unit": "ft-in",
      "appliesTo": "right edge, right plan"
    },
    {
      "label": "Offset dimension",
      "value": "2'-9 3/8\"",
      "unit": "ft-in",
      "appliesTo": "near STA 18+63.35, left plan"
    },
    {
      "label": "Offset dimension",
      "value": "2'-9 3/8\"",
      "unit": "ft-in",
      "appliesTo": "near STA 18+56.65, right plan"
    },
    {
      "label": "Bearing depth dimension",
      "value": "4'-3\"",
      "unit": "ft-in",
      "appliesTo": "vertical dimension at bearing line, left plan"
    },
    {
      "label": "Bearing depth dimension",
      "value": "4'-3\"",
      "unit": "ft-in",
      "appliesTo": "vertical dimension at bearing line, right plan"
    },
    {
      "label": "Small offset",
      "value": "1'-2\"",
      "unit": "ft-in",
      "appliesTo": "bearing detail, left plan (two instances)"
    },
    {
      "label": "Small offset",
      "value": "1'-2\"",
      "unit": "ft-in",
      "appliesTo": "bearing detail, right plan (two instances)"
    },
    {
      "label": "Small offset",
      "value": "2'-1 1/2\"",
      "unit": "ft-in",
      "appliesTo": "bearing detail, left plan (two instances)"
    },
    {
      "label": "Small offset",
      "value": "2'-1 1/2\"",
      "unit": "ft-in",
      "appliesTo": "bearing detail, right plan (two instances)"
    },
    {
      "label": "Small offset",
      "value": "11 1/2\"",
      "unit": "in",
      "appliesTo": "bearing detail edges, left and right plans (multiple instances)"
    },
    {
      "label": "Project number",
      "value": "0019181",
      "unit": "",
      "appliesTo": "title block (P.I. NO.)"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP.",
    "SR 21 WB = PGL",
    "SR 21 EB = PGL"
  ],
  "labels": [
    "GDOT",
    "P.I. NO.",
    "0019181",
    "PLAN",
    "CL BEARING",
    "CL BENT",
    "CL SR 21",
    "BEAM 1",
    "BEAM 2",
    "BEAM 3",
    "BEAM 4",
    "BEAM 5",
    "BEAM 6",
    "BEAM 7",
    "BEAM 8",
    "BEAM 9",
    "BEAM 10",
    "BEAM 11",
    "BEAM 12",
    "STA. 18+63.35",
    "STA. 18+56.65"
  ],
  "description": "This crop shows two adjacent bridge framing/beam layout plan views, likely representing the westbound (SR 21 WB) and eastbound (SR 21 EB) roadway structures at a skewed bent. Each plan shows six beam centerlines (Beam 1-6 and Beam 7-12) spaced at approximately 7'-7 1/2\" with end spans of 6'-0\", flanked by bearing lines and a skewed bent line at 81°-20'-05.0\", with dowel bar hole details and stationing called out. The drawing documents beam spacing, bearing/bent geometry, and skew angle for the superstructure framing at this location on Project P.I. No. 0019181."
}

p15_r01 planPlan

  • Dowel bar holecircular, 3" dia x 12" deepFormed holes for 1-1/2" dia smooth dowel bar, typical, shown at multiple locations along bent/bearing lines

22'-0" ft-in Overall plan width22'-0" ft-in Overall plan width81°-20'-05.0" deg-min-sec Skew angleSTA. 18+63.35 station StationSTA. 18+56.65 station Station42'-6" ft-in Overall beam group width42'-6" ft-in Overall beam group width6'-0" ft-in End spacing+29 more

crop

p15_r01

page 15 · other_p15_r01
Original
p15_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "BENT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Two separate bent cap plan views shown side by side, one for each roadway direction (SR 21 WB and SR 21 EB)"
    },
    {
      "name": "Beam",
      "tag": "BEAM 1-6 / BEAM 7-12",
      "shape": "rectangular (centerline shown only)",
      "material": "",
      "count": 12,
      "note": "Only beam centerlines are shown, no beam cross-section detail; 6 beams per bent cap"
    },
    {
      "name": "Bearing",
      "tag": "BEARING",
      "shape": "circular (symbol)",
      "material": "",
      "count": null,
      "note": "Bearing centerline points marked at each beam location on both bent caps"
    },
    {
      "name": "Dowel bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "3\" dia x 12\" deep formed holes for 1 1/2\" dia smooth dowel bars, shown at ends of bent caps, typical"
    }
  ],
  "measurements": [
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "Bent cap alignment, typical, multiple locations"
    },
    {
      "label": "Beam spacing offset",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "Distance along SR 21 centerline, left plan"
    },
    {
      "label": "Beam spacing offset",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "Distance along SR 21 centerline, right plan"
    },
    {
      "label": "Overall bent cap length",
      "value": "42'-6\"",
      "unit": "ft-in",
      "appliesTo": "Left bent cap"
    },
    {
      "label": "Overall bent cap length",
      "value": "42'-6\"",
      "unit": "ft-in",
      "appliesTo": "Right bent cap"
    },
    {
      "label": "End spacing",
      "value": "6'-0\"",
      "unit": "ft-in",
      "appliesTo": "Beam 1 to Beam 2 / Beam 11 to Beam 12 end spans"
    },
    {
      "label": "Interior beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Beam to beam spacing, typical"
    },
    {
      "label": "Interior beam spacing (bearing line)",
      "value": "7'-7 1/16\"",
      "unit": "ft-in",
      "appliesTo": "Bearing centerline spacing between beams, typical"
    },
    {
      "label": "Cap width",
      "value": "4'-3\"",
      "unit": "ft-in",
      "appliesTo": "Bent cap width"
    },
    {
      "label": "End overhang",
      "value": "2'-3 3/8\"",
      "unit": "ft-in",
      "appliesTo": "Left end of bent cap"
    },
    {
      "label": "End overhang",
      "value": "2'-3 5/16\"",
      "unit": "ft-in",
      "appliesTo": "Right end of bent cap"
    },
    {
      "label": "Setback dimension",
      "value": "1'-2\"",
      "unit": "ft-in",
      "appliesTo": "Cap end to bearing"
    },
    {
      "label": "Setback dimension",
      "value": "2'-1 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Cap end detail"
    },
    {
      "label": "Edge dimension",
      "value": "1 1/2\"",
      "unit": "in",
      "appliesTo": "Cap edge detail"
    },
    {
      "label": "Center dimension",
      "value": "2'-9 3/8\"",
      "unit": "ft-in",
      "appliesTo": "Center bent cap dimension near Beam 5/Beam 8"
    },
    {
      "label": "Station",
      "value": "18+63.35",
      "unit": "",
      "appliesTo": "Left bent, station along alignment"
    },
    {
      "label": "Station",
      "value": "18+56.65",
      "unit": "",
      "appliesTo": "Right bent, station along alignment"
    },
    {
      "label": "Dowel hole size",
      "value": "3\" DIA X 12\" DEEP",
      "unit": "in",
      "appliesTo": "Formed hole for dowel bar"
    },
    {
      "label": "Dowel bar diameter",
      "value": "1 1/2\"",
      "unit": "in",
      "appliesTo": "Smooth dowel bar"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP.",
    "81°-20'-05.0\", TYP."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SR 21 EB = PGL",
    "C SR 21",
    "C BENT",
    "C BEARING",
    "PLAN",
    "GDOT",
    "P.J. NO. 0019181",
    "BEAM 1",
    "BEAM 2",
    "BEAM 3",
    "BEAM 4",
    "BEAM 5",
    "BEAM 6",
    "BEAM 7",
    "BEAM 8",
    "BEAM 9",
    "BEAM 10",
    "BEAM 11",
    "BEAM 12"
  ],
  "description": "This crop shows two plan views of bridge bent caps (one for the westbound and one for the eastbound SR 21 roadway) with beam centerlines numbered 1 through 12, bearing locations, dowel bar hole details, skew angle callouts, and station references. It documents the layout and dimensioning of the bent cap beam seats for beam placement and dowel bar installation on a GDOT highway bridge project (P.J. No. 0019181)."
}

p15_r01Plan

  • Dowel bar holecircular3" dia x 12" deep formed holes for 1 1/2" dia smooth dowel bars, shown at ends of bent caps, typical

81°-20'-05.0" Skew angle22'-0" ft-in Beam spacing offset22'-0" ft-in Beam spacing offset42'-6" ft-in Overall bent cap length42'-6" ft-in Overall bent cap length6'-0" ft-in End spacing7'-7 1/2" ft-in Interior beam spacing7'-7 1/16" ft-in Interior beam spacing (bearing line)+11 more

Page 17

crop

p17_r01 title block

page 17 · gdot_plan_649084f395824aaebf1f5ed48132696f_p17_r01_title_block
Original
p17_r01 title block
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "BENT 4 LEFT",
      "shape": "rectangular, elongated with rounded/tapered ends",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown with beam centerlines 1-6, bearing points, and dowel hole locations"
    },
    {
      "name": "Bent cap",
      "tag": "BENT 4 RIGHT",
      "shape": "rectangular, elongated with rounded/tapered ends",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown with beam centerlines 7-12, bearing points, and dowel hole locations"
    },
    {
      "name": "Dowel hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Formed 3\" dia x 12\" deep holes for 1 1/2\" dia smooth dowels, typical at multiple locations along bent caps"
    },
    {
      "name": "Bearing point",
      "tag": "BRG.",
      "shape": "point marker",
      "material": "",
      "count": null,
      "note": "Centerline of bearing marked at several beam locations"
    },
    {
      "name": "Beam centerline reference",
      "tag": "BEAM 1-12",
      "shape": "line/centerline",
      "material": "",
      "count": 12,
      "note": "Centerlines of beams referenced across both bent cap halves; beams themselves not drawn"
    }
  ],
  "measurements": [
    {
      "label": "Spacing",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "between bent cap halves / roadway"
    },
    {
      "label": "Spacing",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "between bent cap halves / roadway"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "deg-min-sec",
      "appliesTo": "Bent 4 Left"
    },
    {
      "label": "Skew angle typ",
      "value": "81°-20'-05.0\", TYP.",
      "unit": "deg-min-sec",
      "appliesTo": "Bent 4 Left"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "deg-min-sec",
      "appliesTo": "Bent 4 Right"
    },
    {
      "label": "Skew angle typ",
      "value": "81°-20'-05.0\", TYP.",
      "unit": "deg-min-sec",
      "appliesTo": "Bent 4 Right"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "deg-min-sec",
      "appliesTo": "centerline SR 21 area"
    },
    {
      "label": "Station",
      "value": "STA. 19+18.35",
      "unit": "",
      "appliesTo": "Bent 4 Left / bearing line"
    },
    {
      "label": "Station",
      "value": "STA. 19+15.00",
      "unit": "",
      "appliesTo": "END BRIDGE B.F.P.R. BENT 4"
    },
    {
      "label": "Station",
      "value": "STA. 19+11.65",
      "unit": "",
      "appliesTo": "Bent 4 Right"
    },
    {
      "label": "Offset",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left dimension"
    },
    {
      "label": "Offset",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left dimension"
    },
    {
      "label": "Offset",
      "value": "2'-9 3/8\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left dimension"
    },
    {
      "label": "Dimension",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left end detail"
    },
    {
      "label": "Dimension",
      "value": "3'-0 1/8\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left end width"
    },
    {
      "label": "Dimension",
      "value": "3'-0 1/8\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left opposite end width"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/16\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left beam spacing, repeated between beams"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left beam spacing, repeated"
    },
    {
      "label": "Offset",
      "value": "3'-0 7/8\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left end offset"
    },
    {
      "label": "Offset",
      "value": "6'-10 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left cumulative dimension"
    },
    {
      "label": "Offset",
      "value": "6'-10 3/16\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left cumulative dimension other end"
    },
    {
      "label": "Overall length",
      "value": "44'-1 1/16\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Left cap length"
    },
    {
      "label": "Dowel hole size",
      "value": "3\" DIA. X 12\" DEEP",
      "unit": "in",
      "appliesTo": "formed hole for dowel"
    },
    {
      "label": "Dowel size",
      "value": "1 1/2\" DIA.",
      "unit": "in",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "Edge distance",
      "value": "2 3/4\", TYP.",
      "unit": "in",
      "appliesTo": "dowel hole spacing"
    },
    {
      "label": "Offset",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Right dimension"
    },
    {
      "label": "Offset",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Right dimension"
    },
    {
      "label": "Dimension",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Right end detail (partially legible)"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/16\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Right beam spacing, repeated"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Right beam spacing, repeated"
    },
    {
      "label": "Offset",
      "value": "3'-0 7/8\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Right end offset"
    },
    {
      "label": "Offset",
      "value": "6'-10 1/2\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Right cumulative dimension"
    },
    {
      "label": "Overall length",
      "value": "44'-1 1/16\"",
      "unit": "ft-in",
      "appliesTo": "Bent 4 Right cap length"
    },
    {
      "label": "Vertical dimension",
      "value": "3'-0 1/16\"",
      "unit": "ft-in",
      "appliesTo": "end of bent cap, left side"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 3 BRIDGE SHEET 16",
    "SEE DETAIL 4 BRIDGE SHEET 16",
    "B.F.P.R.",
    "END BRIDGE B.F.P.R. BENT 4 STA. 19+15.00",
    "SR 21 WB = PGL",
    "SR 21 EB = PGL",
    "Æ SR 21",
    "Æ BRG.",
    "AHEAD"
  ],
  "labels": [
    "PLAN (BENT 4 LEFT)",
    "PLAN (BENT 4 RIGHT)",
    "GDOT",
    "P.J. NO. 0019181",
    "BEAM 1",
    "BEAM 2",
    "BEAM 3",
    "BEAM 4",
    "BEAM 5",
    "BEAM 6",
    "BEAM 7",
    "BEAM 8",
    "BEAM 9",
    "BEAM 10",
    "BEAM 11",
    "BEAM 12"
  ],
  "description": "This crop shows two plan views, labeled 'Bent 4 Left' and 'Bent 4 Right', of a bridge bent cap for what appears to be a divided highway crossing (SR 21 WB and EB). Each view shows the bent cap with beam centerlines (Beam 1-6 on the left, Beam 7-12 on the right), bearing point locations, formed dowel holes for smooth dowels, skew angles, and station callouts including the End Bridge / B.F.P.R. station at Bent 4. Detailed dimensions along the cap length and dowel hole spacing are provided, with references to Detail 3 and Detail 4 on Bridge Sheet 16 for further detail."
}

p17_r01 title blockPlan

  • Dowel holecircularFormed 3" dia x 12" deep holes for 1 1/2" dia smooth dowels, typical at multiple locations along bent caps

22'-0" ft-in Spacing22'-0" ft-in Spacing81°-20'-05.0" deg-min-sec Skew angle81°-20'-05.0", TYP. deg-min-sec Skew angle typ81°-20'-05.0" deg-min-sec Skew angle81°-20'-05.0", TYP. deg-min-sec Skew angle typ81°-20'-05.0" deg-min-sec Skew angleSTA. 19+18.35 Station+26 more

crop

p17_r01

page 17 · other_p17_r01
Original
p17_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "BENT 4 LEFT",
      "shape": "rectangular, elongated with rounded/oval end sections",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Plan view of bent cap showing beam centerlines 1-6, dowel holes, and dimensioning"
    },
    {
      "name": "Bent cap",
      "tag": "BENT 4 RIGHT",
      "shape": "rectangular, elongated with rounded/oval end sections",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Plan view of bent cap showing beam centerlines 7-12, dowel holes, and dimensioning"
    },
    {
      "name": "Beam centerline marks",
      "tag": "BEAM 1-12",
      "shape": "linear marks/crosshatched squares",
      "material": "",
      "count": 12,
      "note": "Bearing locations marked with small crosshatched squares along each bent cap, 6 per bent cap side"
    },
    {
      "name": "Dowel hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "3\" DIA x 12\" deep holes for 1-1/2\" dia smooth dowel, typical at multiple locations along caps"
    },
    {
      "name": "Bearing pad location",
      "tag": "BRG.",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Centerline of bearing marked near ends of each bent cap"
    }
  ],
  "measurements": [
    {
      "label": "Span dimension",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "between bent centerlines, left side"
    },
    {
      "label": "Span dimension",
      "value": "22'-0\"",
      "unit": "ft-in",
      "appliesTo": "between bent centerlines, right side"
    },
    {
      "label": "Overall length",
      "value": "44'-1 1/16\"",
      "unit": "ft-in",
      "appliesTo": "BENT 4 LEFT cap"
    },
    {
      "label": "Overall length",
      "value": "44'-1 1/16\"",
      "unit": "ft-in",
      "appliesTo": "BENT 4 RIGHT cap"
    },
    {
      "label": "End segment length",
      "value": "3'-0 7/8\"",
      "unit": "ft-in",
      "appliesTo": "end of bent cap, left"
    },
    {
      "label": "End segment length",
      "value": "3'-0 7/8\"",
      "unit": "ft-in",
      "appliesTo": "end of bent cap, right"
    },
    {
      "label": "Segment length",
      "value": "7'-7 1/16\"",
      "unit": "ft-in",
      "appliesTo": "beam spacing, repeated multiple times"
    },
    {
      "label": "Segment length",
      "value": "7'-7\"",
      "unit": "ft-in",
      "appliesTo": "beam spacing, repeated multiple times"
    },
    {
      "label": "Segment length",
      "value": "6'-10 1/2\"",
      "unit": "ft-in",
      "appliesTo": "combined dimension left side"
    },
    {
      "label": "Segment length",
      "value": "6'-10 3/16\"",
      "unit": "ft-in",
      "appliesTo": "combined dimension"
    },
    {
      "label": "Dowel hole size",
      "value": "3\" DIA. X 12\" DEEP",
      "unit": "in",
      "appliesTo": "dowel hole"
    },
    {
      "label": "Dowel diameter",
      "value": "1 1/2\"",
      "unit": "in",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "Spacing",
      "value": "2 3/4\"",
      "unit": "in",
      "appliesTo": "typical spacing between dowel holes"
    },
    {
      "label": "Spacing",
      "value": "2'-9 3/8\"",
      "unit": "ft-in",
      "appliesTo": "dimension along cap"
    },
    {
      "label": "Width dimension",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "cap width"
    },
    {
      "label": "Width dimension",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "cap edge width"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "deg-min-sec",
      "appliesTo": "bent skew angle, typical"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "deg-min-sec",
      "appliesTo": "repeated at multiple locations"
    },
    {
      "label": "Station",
      "value": "STA. 19+18.35",
      "unit": "",
      "appliesTo": "bearing location left"
    },
    {
      "label": "Station",
      "value": "STA. 19+11.65",
      "unit": "",
      "appliesTo": "bearing location right"
    },
    {
      "label": "Station",
      "value": "STA. 19+15.00",
      "unit": "",
      "appliesTo": "End Bridge B.F.P.R. Bent 4"
    },
    {
      "label": "End cap dimension",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": "end of cap detail, left"
    },
    {
      "label": "End cap dimension",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": "end of cap detail, right"
    },
    {
      "label": "P.I. NO.",
      "value": "0019181",
      "unit": "",
      "appliesTo": "Title block"
    }
  ],
  "notes": [
    "SEE DETAIL 3 BRIDGE SHEET 16",
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 4 BRIDGE SHEET 16",
    "B.F.P.R.",
    "END BRIDGE B.F.P.R. BENT 4 STA. 19+15.00",
    "SR 21 WB = PGL",
    "SR 21 EB = PGL",
    "€ SR 21",
    "€ BRG.",
    "AHEAD"
  ],
  "labels": [
    "GDOT",
    "P.I. NO. 0019181",
    "PLAN (BENT 4 LEFT)",
    "PLAN (BENT 4 RIGHT)",
    "€ BEAM 1",
    "€ BEAM 2",
    "€ BEAM 3",
    "€ BEAM 4",
    "€ BEAM 5",
    "€ BEAM 6",
    "€ BEAM 7",
    "€ BEAM 8",
    "€ BEAM 9",
    "€ BEAM 10",
    "€ BEAM 11",
    "€ BEAM 12"
  ],
  "description": "This crop shows plan views of two bridge bent caps (Bent 4 Left and Bent 4 Right) along SR 21, each supporting six beam bearing lines with detailed dimensioning of bearing spacing, dowel hole locations for smooth dowels, skew angle, and stationing. The drawing includes references to bridge sheet 16 details (Detail 3 and Detail 4) and station/PGL callouts for SR 21 westbound and eastbound alignments, documenting the substructure bent cap geometry and beam seat layout at Bent 4."
}

p17_r01Plan

  • Dowel holecircular3" DIA x 12" deep holes for 1-1/2" dia smooth dowel, typical at multiple locations along caps

22'-0" ft-in Span dimension22'-0" ft-in Span dimension44'-1 1/16" ft-in Overall length44'-1 1/16" ft-in Overall length3'-0 7/8" ft-in End segment length3'-0 7/8" ft-in End segment length7'-7 1/16" ft-in Segment length7'-7" ft-in Segment length+16 more