Drawing to BOQpipeline control sheet
← Mindmapwhat the drawings said

Beveled Shim Plate

1 page · 10 crops · ×15 · superstructure

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a bearing shim-plate class.

How the sheets named it

Shim plateshim plateBent 1Bent 2 BackBent 2 AheadBent 3 BackBent 3 AheadBent 4BENT 1BENT 4

Every dimension read for it4

  • 1 inShim plate thickness/offsetp12 · p12_r01 endwall
  • 5 inWidth of shim/dowel offsetp12 · p12_r02 section a a
  • T1T1p12 · p12_r10
  • T2T2p12 · p12_r10

Notes on the sheets that carry it

  • p12ℂ BEARING PAD = ℂ BEVELED SHIM PLATE
  • p12ℂ BEARING
  • p12ℂ BEAM
  • p12B.F.P.R.
  • p12PREFORMED FOAM JOINT FILLER SHALL BE IN ACCORDANCE WITH SUB-SECTION 833.2.10 OF THE GEORGIA DOT SPECIFICATIONS.
  • p12ENDWALL NOT SHOWN
  • p12CL BEVELED SHIM PLATE = CL 3" DIAMETER HOLE
  • p129. BEVELED SHIM PLATES SHALL BE ASTM A709 GRADE 36 AND SHALL BE GALVANIZED IN ACCORDANCE WITH ASTM A123.

Every crop it was read in — the drawing beside what the model took off it

Page 12

crop

p12_r01 endwall

page 12 · gdot_plan_649084f395824aaebf1f5ed48132696f_p12_r01_endwall
Original
p12_r01 endwall
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown hatched at skewed intersection with beam; centerline noted as coincident with beveled shim plate centerline"
    },
    {
      "name": "Beveled shim plate",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Centerline coincides with bearing pad centerline; shown dashed outline"
    },
    {
      "name": "Beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown in plan with parallel edge lines; centerline (CL BEAM) marked"
    },
    {
      "name": "Endwall",
      "tag": "",
      "shape": "trapezoidal",
      "material": "",
      "count": 1,
      "note": "Skewed plan outline labeled ENDWALL, bounded by B.F.P.R. line"
    },
    {
      "name": "Section cut line",
      "tag": "A-A",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Section arrows labeled A at top and bottom indicating cutting plane through beam/bearing area"
    }
  ],
  "measurements": [
    {
      "label": "Shim plate thickness/offset",
      "value": "1",
      "unit": "in",
      "appliesTo": "Beveled shim plate"
    }
  ],
  "notes": [
    "ℂ BEARING PAD = ℂ BEVELED SHIM PLATE",
    "ℂ BEARING",
    "ℂ BEAM",
    "B.F.P.R."
  ],
  "labels": [
    "ENDWALL",
    "A"
  ],
  "description": "This crop is a plan view detail showing the skewed relationship between a bearing pad/beveled shim plate assembly and a beam centerline at an endwall, with a section cut (A-A) indicated through the bearing area. It documents the geometric alignment of the bearing pad, shim plate, and beam centerlines relative to the back face of pavement/roadway (B.F.P.R.) at the endwall, including a 1-inch dimension callout near the bearing detail. No overall structure, full endwall geometry, or additional dimensions are visible in this fragment."
}

p12_r01 endwallPlan

  • Beveled shim plate×1rectangularCenterline coincides with bearing pad centerline; shown dashed outline

1 in Shim plate thickness/offset

crop

p12_r02 section a a

page 12 · gdot_plan_649084f395824aaebf1f5ed48132696f_p12_r02_section_a_a
Original
p12_r02 section a a
{
  "view": "Detail",
  "objects": [
    {
      "name": "Beveled shim plate",
      "tag": "",
      "shape": "tapered/beveled plate",
      "material": "not stated (likely steel)",
      "count": 1,
      "note": "Located under beam at bearing location, shown in Section A-A"
    },
    {
      "name": "Bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "not stated (likely elastomeric)",
      "count": 1,
      "note": "Sits beneath beveled shim plate"
    },
    {
      "name": "Smooth dowel",
      "tag": "",
      "shape": "circular",
      "material": "not stated (likely steel)",
      "count": 1,
      "note": "1 1/2\" diameter, through bearing area"
    },
    {
      "name": "Preformed foam joint filler",
      "tag": "",
      "shape": "rectangular (shown hatched)",
      "material": "foam",
      "count": null,
      "note": "Per legend, in accordance with GA DOT Sub-section 833.2.10"
    },
    {
      "name": "Beam",
      "tag": "",
      "shape": "tapered/flared section",
      "material": "not stated",
      "count": 1,
      "note": "Shown in cross-section, centerline noted as CL BEAM"
    },
    {
      "name": "Bearing plate/base plate (plan view)",
      "tag": "",
      "shape": "rectangular with circular hole",
      "material": "not stated (likely steel plate)",
      "count": 1,
      "note": "Plan view below Section A-A showing overall plate with central 3\" diameter hole; dimensions given parametrically as L+2\" and W+2\""
    }
  ],
  "measurements": [
    {
      "label": "Width of shim/dowel offset",
      "value": "5",
      "unit": "in",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "Thickness dimension",
      "value": "1",
      "unit": "in",
      "appliesTo": "bearing pad or shim"
    },
    {
      "label": "Height dimension",
      "value": "1'-0\"",
      "unit": "ft-in",
      "appliesTo": "dowel/bearing assembly vertical dimension"
    },
    {
      "label": "Dowel diameter",
      "value": "1 1/2",
      "unit": "in",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "Plate overall length",
      "value": "L+2",
      "unit": "in",
      "appliesTo": "plan view plate"
    },
    {
      "label": "Half plate length",
      "value": "(L+2\")/2",
      "unit": "in",
      "appliesTo": "plan view plate"
    },
    {
      "label": "Plate overall width",
      "value": "W+2",
      "unit": "in",
      "appliesTo": "plan view plate"
    },
    {
      "label": "Half plate width",
      "value": "(W+2\")/2",
      "unit": "in",
      "appliesTo": "plan view plate"
    },
    {
      "label": "Central hole diameter",
      "value": "3",
      "unit": "in",
      "appliesTo": "plan view plate hole"
    }
  ],
  "notes": [
    "PREFORMED FOAM JOINT FILLER SHALL BE IN ACCORDANCE WITH SUB-SECTION 833.2.10 OF THE GEORGIA DOT SPECIFICATIONS.",
    "ENDWALL NOT SHOWN",
    "CL BEVELED SHIM PLATE = CL 3\" DIAMETER HOLE"
  ],
  "labels": [
    "CL BEAM",
    "BEVELED SHIM PLATE",
    "BEARING PAD",
    "1 1/2\" DIAMETER SMOOTH DOWEL",
    "SECTION A-A",
    "B"
  ],
  "description": "This crop shows two related details: an upper cross-section (Section A-A) through a beam bearing assembly illustrating a beveled shim plate, bearing pad, and a 1 1/2\" diameter smooth dowel with preformed foam joint filler noted per Georgia DOT spec, with the endwall omitted from the view; and a lower plan view of a rectangular bearing/shim plate with a central circular hole, dimensioned parametrically in terms of beam length (L) and width (W) plus 2 inches, with an arrow labeled 'B' indicating a section cut direction. This detail documents the beam bearing/shim plate assembly design at a bridge bearing location."
}

p12_r02 section a aDetail

  • Beveled shim plate×1tapered/beveled platenot stated (likely steel)Located under beam at bearing location, shown in Section A-A

5 in Width of shim/dowel offset1 in Thickness dimension1'-0" ft-in Height dimension1 1/2 in Dowel diameterL+2 in Plate overall length(L+2")/2 in Half plate lengthW+2 in Plate overall width(W+2")/2 in Half plate width+1 more

crop

p12_r08 table

page 12 · gdot_plan_649084f395824aaebf1f5ed48132696f_p12_r08_table
Original
p12_r08 table
{
  "view": "Schedule",
  "objects": [
    {
      "name": "Bearing pad",
      "tag": "Bent 1",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "W=16\", L=12\", T=4\", 3 internal plates"
    },
    {
      "name": "Bearing pad",
      "tag": "Bent 2 Back",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "W=16\", L=12\", T=4\", 3 internal plates"
    },
    {
      "name": "Bearing pad",
      "tag": "Bent 2 Ahead",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "W=18\", L=10\", T=1 3/4\", 1 internal plate"
    },
    {
      "name": "Bearing pad",
      "tag": "Bent 3 Back",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "W=18\", L=10\", T=1 3/4\", 1 internal plate"
    },
    {
      "name": "Bearing pad",
      "tag": "Bent 3 Ahead",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "W=16\", L=12\", T=4\", 3 internal plates"
    },
    {
      "name": "Bearing pad",
      "tag": "Bent 4",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "W=16\", L=12\", T=4\", 3 internal plates"
    },
    {
      "name": "Beveled shim plate",
      "tag": "Bent 1",
      "shape": "tapered",
      "material": "steel",
      "count": 2,
      "note": "T1=1/4\", T2=1/2\""
    },
    {
      "name": "Beveled shim plate",
      "tag": "Bent 2 Back",
      "shape": "tapered",
      "material": "steel",
      "count": 0,
      "note": "No shim plates listed (\"-\")"
    },
    {
      "name": "Beveled shim plate",
      "tag": "Bent 2 Ahead",
      "shape": "tapered",
      "material": "steel",
      "count": 0,
      "note": "No shim plates listed (\"-\")"
    },
    {
      "name": "Beveled shim plate",
      "tag": "Bent 3 Back",
      "shape": "tapered",
      "material": "steel",
      "count": 0,
      "note": "No shim plates listed (\"-\")"
    },
    {
      "name": "Beveled shim plate",
      "tag": "Bent 3 Ahead",
      "shape": "tapered",
      "material": "steel",
      "count": 0,
      "note": "No shim plates listed (\"-\")"
    },
    {
      "name": "Beveled shim plate",
      "tag": "Bent 4",
      "shape": "tapered",
      "material": "steel",
      "count": 2,
      "note": "T1=1/2\", T2=1/4\""
    }
  ],
  "measurements": [
    {
      "label": "W",
      "value": "16",
      "unit": "in",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "L",
      "value": "12",
      "unit": "in",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "T",
      "value": "4",
      "unit": "in",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "Number of internal plate(s)",
      "value": "3",
      "unit": "",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "Design shear deflection",
      "value": "3/8",
      "unit": "in",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "Dead load",
      "value": "55",
      "unit": "kips",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "Live load (no impact)",
      "value": "63",
      "unit": "kips",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "Dead load + live load",
      "value": "118",
      "unit": "kips",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "T1",
      "value": "1/4",
      "unit": "in",
      "appliesTo": "Bent 1 shim plate"
    },
    {
      "label": "T2",
      "value": "1/2",
      "unit": "in",
      "appliesTo": "Bent 1 shim plate"
    },
    {
      "label": "W",
      "value": "16",
      "unit": "in",
      "appliesTo": "Bent 2 Back bearing pad"
    },
    {
      "label": "L",
      "value": "12",
      "unit": "in",
      "appliesTo": "Bent 2 Back bearing pad"
    },
    {
      "label": "T",
      "value": "4",
      "unit": "in",
      "appliesTo": "Bent 2 Back bearing pad"
    },
    {
      "label": "Number of internal plate(s)",
      "value": "3",
      "unit": "",
      "appliesTo": "Bent 2 Back bearing pad"
    },
    {
      "label": "Design shear deflection",
      "value": "0",
      "unit": "",
      "appliesTo": "Bent 2 Back bearing pad"
    },
    {
      "label": "Dead load",
      "value": "47",
      "unit": "kips",
      "appliesTo": "Bent 2 Back bearing pad"
    },
    {
      "label": "Live load (no impact)",
      "value": "61",
      "unit": "kips",
      "appliesTo": "Bent 2 Back bearing pad"
    },
    {
      "label": "Dead load + live load",
      "value": "108",
      "unit": "kips",
      "appliesTo": "Bent 2 Back bearing pad"
    },
    {
      "label": "T1",
      "value": "-",
      "unit": "",
      "appliesTo": "Bent 2 Back shim plate"
    },
    {
      "label": "T2",
      "value": "-",
      "unit": "",
      "appliesTo": "Bent 2 Back shim plate"
    },
    {
      "label": "W",
      "value": "18",
      "unit": "in",
      "appliesTo": "Bent 2 Ahead bearing pad"
    },
    {
      "label": "L",
      "value": "10",
      "unit": "in",
      "appliesTo": "Bent 2 Ahead bearing pad"
    },
    {
      "label": "T",
      "value": "1 3/4",
      "unit": "in",
      "appliesTo": "Bent 2 Ahead bearing pad"
    },
    {
      "label": "Number of internal plate(s)",
      "value": "1",
      "unit": "",
      "appliesTo": "Bent 2 Ahead bearing pad"
    },
    {
      "label": "Design shear deflection",
      "value": "0",
      "unit": "",
      "appliesTo": "Bent 2 Ahead bearing pad"
    },
    {
      "label": "Dead load",
      "value": "79",
      "unit": "kips",
      "appliesTo": "Bent 2 Ahead bearing pad"
    },
    {
      "label": "Live load (no impact)",
      "value": "71",
      "unit": "kips",
      "appliesTo": "Bent 2 Ahead bearing pad"
    },
    {
      "label": "Dead load + live load",
      "value": "150",
      "unit": "kips",
      "appliesTo": "Bent 2 Ahead bearing pad"
    },
    {
      "label": "T1",
      "value": "-",
      "unit": "",
      "appliesTo": "Bent 2 Ahead shim plate"
    },
    {
      "label": "T2",
      "value": "-",
      "unit": "",
      "appliesTo": "Bent 2 Ahead shim plate"
    },
    {
      "label": "W",
      "value": "18",
      "unit": "in",
      "appliesTo": "Bent 3 Back bearing pad"
    },
    {
      "label": "L",
      "value": "10",
      "unit": "in",
      "appliesTo": "Bent 3 Back bearing pad"
    },
    {
      "label": "T",
      "value": "1 3/4",
      "unit": "in",
      "appliesTo": "Bent 3 Back bearing pad"
    },
    {
      "label": "Number of internal plate(s)",
      "value": "1",
      "unit": "",
      "appliesTo": "Bent 3 Back bearing pad"
    },
    {
      "label": "Design shear deflection",
      "value": "1/2",
      "unit": "in",
      "appliesTo": "Bent 3 Back bearing pad"
    },
    {
      "label": "Dead load",
      "value": "79",
      "unit": "kips",
      "appliesTo": "Bent 3 Back bearing pad"
    },
    {
      "label": "Live load (no impact)",
      "value": "71",
      "unit": "kips",
      "appliesTo": "Bent 3 Back bearing pad"
    },
    {
      "label": "Dead load + live load",
      "value": "150",
      "unit": "kips",
      "appliesTo": "Bent 3 Back bearing pad"
    },
    {
      "label": "T1",
      "value": "-",
      "unit": "",
      "appliesTo": "Bent 3 Back shim plate"
    },
    {
      "label": "T2",
      "value": "-",
      "unit": "",
      "appliesTo": "Bent 3 Back shim plate"
    },
    {
      "label": "W",
      "value": "16",
      "unit": "in",
      "appliesTo": "Bent 3 Ahead bearing pad"
    },
    {
      "label": "L",
      "value": "12",
      "unit": "in",
      "appliesTo": "Bent 3 Ahead bearing pad"
    },
    {
      "label": "T",
      "value": "4",
      "unit": "in",
      "appliesTo": "Bent 3 Ahead bearing pad"
    },
    {
      "label": "Number of internal plate(s)",
      "value": "3",
      "unit": "",
      "appliesTo": "Bent 3 Ahead bearing pad"
    },
    {
      "label": "Design shear deflection",
      "value": "1/2",
      "unit": "in",
      "appliesTo": "Bent 3 Ahead bearing pad"
    },
    {
      "label": "Dead load",
      "value": "47",
      "unit": "kips",
      "appliesTo": "Bent 3 Ahead bearing pad"
    },
    {
      "label": "Live load (no impact)",
      "value": "61",
      "unit": "kips",
      "appliesTo": "Bent 3 Ahead bearing pad"
    },
    {
      "label": "Dead load + live load",
      "value": "108",
      "unit": "kips",
      "appliesTo": "Bent 3 Ahead bearing pad"
    },
    {
      "label": "T1",
      "value": "-",
      "unit": "",
      "appliesTo": "Bent 3 Ahead shim plate"
    },
    {
      "label": "T2",
      "value": "-",
      "unit": "",
      "appliesTo": "Bent 3 Ahead shim plate"
    },
    {
      "label": "W",
      "value": "16",
      "unit": "in",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "L",
      "value": "12",
      "unit": "in",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "T",
      "value": "4",
      "unit": "in",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "Number of internal plate(s)",
      "value": "3",
      "unit": "",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "Design shear deflection",
      "value": "7/8",
      "unit": "in",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "Dead load",
      "value": "55",
      "unit": "kips",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "Live load (no impact)",
      "value": "63",
      "unit": "kips",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "Dead load + live load",
      "value": "118",
      "unit": "kips",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "T1",
      "value": "1/2",
      "unit": "in",
      "appliesTo": "Bent 4 shim plate"
    },
    {
      "label": "T2",
      "value": "1/4",
      "unit": "in",
      "appliesTo": "Bent 4 shim plate"
    }
  ],
  "notes": [],
  "labels": [
    "BEARING PADS",
    "DESIGN LOADS (KIPS)",
    "BEVELED SHIM PLATES",
    "BENT",
    "W",
    "L",
    "T",
    "NUMBER OF INTERNAL PLATE(S)",
    "DESIGN SHEAR DEFLECTION",
    "DEAD LOAD",
    "LIVE LOAD (NO IMPACT)",
    "DEAD LOAD + LIVE LOAD",
    "T1",
    "T2"
  ],
  "description": "This crop is a schedule table listing bearing pad and beveled shim plate dimensions and design loads for six bent/back/ahead conditions (Bent 1, 2 Back, 2 Ahead, 3 Back, 3 Ahead, and Bent 4). Each row gives bearing pad width, length, thickness, number of internal plates, design shear deflection, dead load, live load, and combined load in kips, along with beveled shim plate thicknesses (T1, T2) where applicable. This is a design data schedule rather than a plan or elevation view, used to specify bearing hardware requirements at each bent location."
}

p12_r08 tableSchedule

  • Bearing padBent 1×1rectangularW=16", L=12", T=4", 3 internal plates
  • Bearing padBent 2 Back×1rectangularW=16", L=12", T=4", 3 internal plates
  • Bearing padBent 2 Ahead×1rectangularW=18", L=10", T=1 3/4", 1 internal plate
  • Bearing padBent 3 Back×1rectangularW=18", L=10", T=1 3/4", 1 internal plate
  • Bearing padBent 3 Ahead×1rectangularW=16", L=12", T=4", 3 internal plates
  • Bearing padBent 4×1rectangularW=16", L=12", T=4", 3 internal plates
  • Beveled shim plateBent 1×2taperedsteelT1=1/4", T2=1/2"
  • Beveled shim plateBent 2 Back×0taperedsteelNo shim plates listed ("-")
  • Beveled shim plateBent 2 Ahead×0taperedsteelNo shim plates listed ("-")
  • Beveled shim plateBent 3 Back×0taperedsteelNo shim plates listed ("-")
  • Beveled shim plateBent 3 Ahead×0taperedsteelNo shim plates listed ("-")
  • Beveled shim plateBent 4×2taperedsteelT1=1/2", T2=1/4"

16 in W12 in L4 in T3 Number of internal plate(s)3/8 in Design shear deflection55 kips Dead load63 kips Live load (no impact)118 kips Dead load + live load+52 more

crop

p12_r10 section b b

page 12 · gdot_plan_649084f395824aaebf1f5ed48132696f_p12_r10_section_b_b
Original
p12_r10 section b b
{
  "view": "Section",
  "objects": [
    {
      "name": "Shim plate",
      "tag": "",
      "shape": "tapered/beveled rectangular plate",
      "material": "",
      "count": 1,
      "note": "Shown in section with thickness T1 at one end and T2 at the other, tapering along its length; direction 'AHEAD' indicated by arrow"
    }
  ],
  "measurements": [
    {
      "label": "T1",
      "value": "",
      "unit": "",
      "appliesTo": "Shim plate - thin end thickness (value not printed, only tag shown)"
    },
    {
      "label": "T2",
      "value": "",
      "unit": "",
      "appliesTo": "Shim plate - thick end thickness (value not printed, only tag shown)"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B",
    "BEVELED SHIM PLATE",
    "AHEAD"
  ],
  "description": "This crop shows Section B-B, a detail of a beveled (tapered) shim plate, indicating direction 'AHEAD' along its length and thickness callouts T1 and T2 at each end. The title 'BEVELED SHIM PLATE' identifies the detail below the section view. No dimensional values are printed for T1 or T2 in this crop."
}

p12_r10 section b bSection

  • Shim plate×1tapered/beveled rectangular plateShown in section with thickness T1 at one end and T2 at the other, tapering along its length; direction 'AHEAD' indicated by arrow

T1 T2

crop

p12_r12 title block

page 12 · gdot_plan_649084f395824aaebf1f5ed48132696f_p12_r12_title_block
Original
p12_r12 title block
{
  "view": "Detail",
  "objects": [
    {
      "name": "Shim plate",
      "tag": "",
      "shape": "tapered/beveled rectangular plate",
      "material": "",
      "count": 1,
      "note": "Shown in side profile, tapering from thickness T1 to T2; material not specified in this crop"
    }
  ],
  "measurements": [
    {
      "label": "T1",
      "value": "",
      "unit": "",
      "appliesTo": "Beveled shim plate (thicker end)"
    },
    {
      "label": "T2",
      "value": "",
      "unit": "",
      "appliesTo": "Beveled shim plate (thinner end)"
    }
  ],
  "notes": [],
  "labels": [
    "BEVELED SHIM PLATE"
  ],
  "description": "This crop shows a detail drawing of a beveled shim plate in profile view, illustrating its tapered cross-section with thickness dimensions labeled T1 at the thick end and T2 at the thin end. The rest of the sheet area is blank except for a title block signature line at the bottom edge. No specific numeric dimension values are printed, only the dimension labels T1 and T2."
}

p12_r12 title blockDetail

  • Shim plate×1tapered/beveled rectangular plateShown in side profile, tapering from thickness T1 to T2; material not specified in this crop

T1 T2

crop

p12_r02

page 12 · other_p12_r02
Original
p12_r02
{
  "view": "Detail",
  "objects": [
    {
      "name": "Beam",
      "tag": "",
      "shape": "I-girder (tapered end shown)",
      "material": "",
      "count": 1,
      "note": "Shown in Section A-A, centerline labeled C BEAM"
    },
    {
      "name": "Bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "elastomeric (per referenced note panel)",
      "count": 1,
      "note": "Shown in section under beam end"
    },
    {
      "name": "Beveled shim plate",
      "tag": "",
      "shape": "rectangular/tapered, plan shown as rectangular with center hole",
      "material": "steel (per referenced note panel)",
      "count": 1,
      "note": "Shown in both section and plan views; plan view dimensions L+2\" x W+2\" with center hole"
    },
    {
      "name": "Smooth dowel",
      "tag": "",
      "shape": "circular (round bar)",
      "material": "steel (per referenced note panel)",
      "count": 1,
      "note": "1 1/2\" diameter dowel shown vertical in section"
    },
    {
      "name": "Preformed foam joint filler",
      "tag": "",
      "shape": "rectangular (hatched)",
      "material": "foam",
      "count": 1,
      "note": "Indicated by hatched legend symbol"
    },
    {
      "name": "Hole (in beveled shim plate)",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "3\" diameter hole, centered on plate, aligned with dowel"
    }
  ],
  "measurements": [
    {
      "label": "Height dimension in section",
      "value": "5",
      "unit": "in",
      "appliesTo": "beveled shim plate/bearing assembly"
    },
    {
      "label": "Offset dimension",
      "value": "1",
      "unit": "in",
      "appliesTo": "section detail near dowel"
    },
    {
      "label": "Dowel embedment/length dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "Dowel diameter",
      "value": "1 1/2",
      "unit": "in",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "Plan length dimension",
      "value": "L+2\"",
      "unit": "",
      "appliesTo": "beveled shim plate plan"
    },
    {
      "label": "Half plan length dimension",
      "value": "(L+2\")/2",
      "unit": "",
      "appliesTo": "beveled shim plate plan"
    },
    {
      "label": "Plan width dimension",
      "value": "W+2\"",
      "unit": "",
      "appliesTo": "beveled shim plate plan"
    },
    {
      "label": "Half plan width dimension",
      "value": "(W+2\")/2",
      "unit": "",
      "appliesTo": "beveled shim plate plan"
    },
    {
      "label": "Hole diameter",
      "value": "3",
      "unit": "in",
      "appliesTo": "beveled shim plate center hole"
    }
  ],
  "notes": [
    "PREFORMED FOAM JOINT FILLER SHALL BE IN ACCORDANCE WITH SUB-SECTION 833.2.10 OF THE GEORGIA DOT SPECIFICATIONS.",
    "ENDWALL NOT SHOWN"
  ],
  "labels": [
    "C BEAM",
    "BEVELED SHIM PLATE",
    "BEARING PAD",
    "1 1/2\" DIAMETER SMOOTH DOWEL",
    "SECTION A-A",
    "C BEVELED SHIM PLATE = C 3\" DIAMETER HOLE",
    "B"
  ],
  "description": "This crop shows a bearing/beveled shim plate detail sheet: an upper Section A-A through a beam end illustrating the beveled shim plate, bearing pad, smooth dowel, and preformed foam joint filler with local dimensions (5\", 1\", 1'-0\", 1 1/2\" dowel diameter); and a lower plan view of the beveled shim plate showing its parametric length/width dimensions (L+2\", W+2\", and their halves) and a 3\" diameter center hole aligned with the dowel and beam centerline. It documents the geometry of the bearing pad/beveled shim plate assembly referenced by the accompanying bearing schedule and material notes on this sheet."
}

p12_r02Detail

  • Beveled shim plate×1rectangular/tapered, plan shown as rectangular with center holesteel (per referenced note panel)Shown in both section and plan views; plan view dimensions L+2" x W+2" with center hole

5 in Height dimension in section1 in Offset dimension1'-0" Dowel embedment/length dimension1 1/2 in Dowel diameterL+2" Plan length dimension(L+2")/2 Half plan length dimensionW+2" Plan width dimension(W+2")/2 Half plan width dimension+1 more

crop

p12_r07

page 12 · other_p12_r07
Original
p12_r07
{
  "view": "Notes",
  "objects": [
    {
      "name": "shim plate",
      "tag": "",
      "shape": "beveled",
      "material": "structural steel (ASTM A709 Grade 36, galvanized)",
      "count": null,
      "note": "Referenced only in note text, not depicted graphically"
    }
  ],
  "measurements": [],
  "notes": [
    "9. BEVELED SHIM PLATES SHALL BE ASTM A709 GRADE 36 AND SHALL BE GALVANIZED IN ACCORDANCE WITH ASTM A123."
  ],
  "labels": [],
  "description": "This crop shows a single numbered general note (item 9) specifying material and finish requirements for beveled shim plates, calling for ASTM A709 Grade 36 steel with galvanizing per ASTM A123. No drawing graphics, dimensions, or other objects are shown in this fragment."
}

p12_r07Notes

  • shim platebeveledstructural steel (ASTM A709 Grade 36, galvanized)Referenced only in note text, not depicted graphically
crop

p12_r08

page 12 · other_p12_r08
Original
p12_r08
{
  "view": "Schedule",
  "objects": [
    {
      "name": "Bearing pad",
      "tag": "BENT 1",
      "shape": "rectangular",
      "material": "elastomeric (implied)",
      "count": 1,
      "note": "W=16\", L=12\", T=4\", 3 internal plates"
    },
    {
      "name": "Bearing pad",
      "tag": "BENT 2 BACK",
      "shape": "rectangular",
      "material": "elastomeric (implied)",
      "count": 1,
      "note": "W=16\", L=12\", T=4\", 3 internal plates"
    },
    {
      "name": "Bearing pad",
      "tag": "BENT 2 AHEAD",
      "shape": "rectangular",
      "material": "elastomeric (implied)",
      "count": 1,
      "note": "W=18\", L=10\", T=1 3/4\", 1 internal plate"
    },
    {
      "name": "Bearing pad",
      "tag": "BENT 3 BACK",
      "shape": "rectangular",
      "material": "elastomeric (implied)",
      "count": 1,
      "note": "W=18\", L=10\", T=1 3/4\", 1 internal plate"
    },
    {
      "name": "Bearing pad",
      "tag": "BENT 3 AHEAD",
      "shape": "rectangular",
      "material": "elastomeric (implied)",
      "count": 1,
      "note": "W=16\", L=12\", T=4\", 3 internal plates"
    },
    {
      "name": "Bearing pad",
      "tag": "BENT 4",
      "shape": "rectangular",
      "material": "elastomeric (implied)",
      "count": 1,
      "note": "W=16\", L=12\", T=4\", 3 internal plates"
    },
    {
      "name": "Beveled shim plate",
      "tag": "BENT 1",
      "shape": "rectangular, tapered",
      "material": "steel (implied)",
      "count": 2,
      "note": "T1=1/4\", T2=1/2\""
    },
    {
      "name": "Beveled shim plate",
      "tag": "BENT 4",
      "shape": "rectangular, tapered",
      "material": "steel (implied)",
      "count": 2,
      "note": "T1=1/2\", T2=1/4\""
    }
  ],
  "measurements": [
    {
      "label": "W",
      "value": "16",
      "unit": "in",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "L",
      "value": "12",
      "unit": "in",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "T",
      "value": "4",
      "unit": "in",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "3",
      "unit": "",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "3/8",
      "unit": "in",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "55",
      "unit": "kips",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "63",
      "unit": "kips",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "118",
      "unit": "kips",
      "appliesTo": "BENT 1 bearing pad"
    },
    {
      "label": "T1",
      "value": "1/4",
      "unit": "in",
      "appliesTo": "BENT 1 beveled shim plate"
    },
    {
      "label": "T2",
      "value": "1/2",
      "unit": "in",
      "appliesTo": "BENT 1 beveled shim plate"
    },
    {
      "label": "W",
      "value": "16",
      "unit": "in",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "L",
      "value": "12",
      "unit": "in",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "T",
      "value": "4",
      "unit": "in",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "3",
      "unit": "",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "0",
      "unit": "",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "47",
      "unit": "kips",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "61",
      "unit": "kips",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "108",
      "unit": "kips",
      "appliesTo": "BENT 2 BACK bearing pad"
    },
    {
      "label": "T1",
      "value": "-",
      "unit": "",
      "appliesTo": "BENT 2 BACK beveled shim plate"
    },
    {
      "label": "T2",
      "value": "-",
      "unit": "",
      "appliesTo": "BENT 2 BACK beveled shim plate"
    },
    {
      "label": "W",
      "value": "18",
      "unit": "in",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "L",
      "value": "10",
      "unit": "in",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "T",
      "value": "1 3/4",
      "unit": "in",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "1",
      "unit": "",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "0",
      "unit": "",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "79",
      "unit": "kips",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "71",
      "unit": "kips",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "150",
      "unit": "kips",
      "appliesTo": "BENT 2 AHEAD bearing pad"
    },
    {
      "label": "T1",
      "value": "-",
      "unit": "",
      "appliesTo": "BENT 2 AHEAD beveled shim plate"
    },
    {
      "label": "T2",
      "value": "-",
      "unit": "",
      "appliesTo": "BENT 2 AHEAD beveled shim plate"
    },
    {
      "label": "W",
      "value": "18",
      "unit": "in",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "L",
      "value": "10",
      "unit": "in",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "T",
      "value": "1 3/4",
      "unit": "in",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "1",
      "unit": "",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "1/2",
      "unit": "in",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "79",
      "unit": "kips",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "71",
      "unit": "kips",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "150",
      "unit": "kips",
      "appliesTo": "BENT 3 BACK bearing pad"
    },
    {
      "label": "T1",
      "value": "-",
      "unit": "",
      "appliesTo": "BENT 3 BACK beveled shim plate"
    },
    {
      "label": "T2",
      "value": "-",
      "unit": "",
      "appliesTo": "BENT 3 BACK beveled shim plate"
    },
    {
      "label": "W",
      "value": "16",
      "unit": "in",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "L",
      "value": "12",
      "unit": "in",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "T",
      "value": "4",
      "unit": "in",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "3",
      "unit": "",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "1/2",
      "unit": "in",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "47",
      "unit": "kips",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "61",
      "unit": "kips",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "108",
      "unit": "kips",
      "appliesTo": "BENT 3 AHEAD bearing pad"
    },
    {
      "label": "T1",
      "value": "-",
      "unit": "",
      "appliesTo": "BENT 3 AHEAD beveled shim plate"
    },
    {
      "label": "T2",
      "value": "-",
      "unit": "",
      "appliesTo": "BENT 3 AHEAD beveled shim plate"
    },
    {
      "label": "W",
      "value": "16",
      "unit": "in",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "L",
      "value": "12",
      "unit": "in",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "T",
      "value": "4",
      "unit": "in",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "NUMBER OF INTERNAL PLATE(S)",
      "value": "3",
      "unit": "",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "DESIGN SHEAR DEFLECTION",
      "value": "7/8",
      "unit": "in",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "DEAD LOAD",
      "value": "55",
      "unit": "kips",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "LIVE LOAD (NO IMPACT)",
      "value": "63",
      "unit": "kips",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "DEAD LOAD + LIVE LOAD",
      "value": "118",
      "unit": "kips",
      "appliesTo": "BENT 4 bearing pad"
    },
    {
      "label": "T1",
      "value": "1/2",
      "unit": "in",
      "appliesTo": "BENT 4 beveled shim plate"
    },
    {
      "label": "T2",
      "value": "1/4",
      "unit": "in",
      "appliesTo": "BENT 4 beveled shim plate"
    }
  ],
  "notes": [],
  "labels": [
    "BENT",
    "BEARING PADS",
    "W",
    "L",
    "T",
    "NUMBER OF INTERNAL PLATE(S)",
    "DESIGN SHEAR DEFLECTION",
    "DESIGN LOADS (KIPS)",
    "DEAD LOAD",
    "LIVE LOAD (NO IMPACT)",
    "DEAD LOAD + LIVE LOAD",
    "BEVELED SHIM PLATES",
    "T1",
    "T2",
    "2 BACK",
    "2 AHEAD",
    "3 BACK",
    "3 AHEAD"
  ],
  "description": "This crop is a schedule table listing bearing pad and beveled shim plate dimensions and design loads for each bent (1, 2 Back, 2 Ahead, 3 Back, 3 Ahead, and 4) of a bridge structure. For each bent it gives bearing pad width, length, thickness, number of internal plates, design shear deflection, and dead/live/combined design loads in kips, along with beveled shim plate thicknesses T1 and T2 where applicable. It documents the bearing design data needed for fabrication/take-off of bearing pads and shim plates at each substructure bent."
}

p12_r08Schedule

  • Bearing padBENT 1×1rectangularelastomeric (implied)W=16", L=12", T=4", 3 internal plates
  • Bearing padBENT 4×1rectangularelastomeric (implied)W=16", L=12", T=4", 3 internal plates
  • Beveled shim plateBENT 1×2rectangular, taperedsteel (implied)T1=1/4", T2=1/2"
  • Beveled shim plateBENT 4×2rectangular, taperedsteel (implied)T1=1/2", T2=1/4"

16 in W12 in L4 in T3 NUMBER OF INTERNAL PLATE(S)3/8 in DESIGN SHEAR DEFLECTION55 kips DEAD LOAD63 kips LIVE LOAD (NO IMPACT)118 kips DEAD LOAD + LIVE LOAD+52 more

crop

p12_r10

page 12 · other_p12_r10
Original
p12_r10
{
  "view": "Detail",
  "objects": [
    {
      "name": "Beveled shim plate",
      "tag": "",
      "shape": "tapered (rectangular in plan, beveled in section)",
      "material": "ASTM A709 Grade 36, galvanized per ASTM A123 (per linked note panel)",
      "count": 1,
      "note": "Shown in Section B-B with tapered thickness from T1 to T2, direction labeled AHEAD"
    }
  ],
  "measurements": [
    {
      "label": "T1",
      "value": "T1",
      "unit": "",
      "appliesTo": "Beveled shim plate"
    },
    {
      "label": "T2",
      "value": "T2",
      "unit": "",
      "appliesTo": "Beveled shim plate"
    }
  ],
  "notes": [],
  "labels": [
    "AHEAD",
    "SECTION B-B",
    "BEVELED SHIM PLATE"
  ],
  "description": "This crop shows a detail titled 'Beveled Shim Plate' with a section view labeled Section B-B, depicting a tapered plate with thickness dimensions T1 and T2 at opposite ends, and a directional arrow labeled AHEAD indicating orientation. No specific numeric values are printed for T1 or T2 in this crop; actual thickness values are provided in the linked bearing pad schedule table."
}

p12_r10Detail

  • Beveled shim plate×1tapered (rectangular in plan, beveled in section)ASTM A709 Grade 36, galvanized per ASTM A123 (per linked note panel)Shown in Section B-B with tapered thickness from T1 to T2, direction labeled AHEAD

T1 T1T2 T2

crop

p12_r12

page 12 · other_p12_r12
Original
p12_r12
{
  "view": "Detail",
  "objects": [
    {
      "name": "Beveled shim plate",
      "tag": "",
      "shape": "tapered/wedge-shaped rectangular plate",
      "material": "ASTM A709 Grade 36 (per related note panel)",
      "count": 1,
      "note": "Shown in profile/elevation view with thickness dimensioned at two ends (T1, T2)."
    }
  ],
  "measurements": [
    {
      "label": "T1",
      "value": "T1",
      "unit": "",
      "appliesTo": "Beveled shim plate (thick end)"
    },
    {
      "label": "T2",
      "value": "T2",
      "unit": "",
      "appliesTo": "Beveled shim plate (thin end)"
    }
  ],
  "notes": [],
  "labels": [
    "BEVELED SHIM PLATE",
    "aruna sastry",
    "5/28/2025",
    "4:47:40 PM"
  ],
  "description": "This crop shows a single detail drawing of a beveled shim plate in side elevation, depicted as a tapered wedge shape with thickness callouts T1 at the thick end and T2 at the thin end. The label 'BEVELED SHIM PLATE' identifies the detail; no specific numeric dimensions are printed in this crop, only the symbolic thickness labels T1 and T2. A signature/timestamp footer ('aruna sastry', date, time) appears at the bottom of the sheet."
}

p12_r12Detail

  • Beveled shim plate×1tapered/wedge-shaped rectangular plateASTM A709 Grade 36 (per related note panel)Shown in profile/elevation view with thickness dimensioned at two ends (T1, T2).

T1 T1T2 T2